Benq T900HD User Manual

18.5" wide LCD Monitor

User Manual

English

Deutsch

Français

Italiano

Español
Pyccкий

日本语

简中

繁中

Suomi

Nederlands

PRECAUTIONS

Information for users applicable in European Union countries

The symbol on the product or its packaging signifies that this product has to be
disposed separately from ordinary household wastes at its end of life. Please
kindly be aware that this is your responsibility to dispose electronic equipment
at recycling centers so as to help conserve natural resources. Each country in
the European Union should have its collection centers for electrical and
electronic equipment recycling. For information about your recycling drop off
area, please contact your local related electrical and electronic equipment
waste management authority or the retailer where you bought the product.

Information for users applicable in United States of America

LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE
RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR
FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE ELECTRONIC
INDUSTRIES ALLIANCE AT WWW.EIAE.ORG. FOR LAMP SPECIFIC
DISPOSAL INFORMATION CHECK WWW.LAMPRECYCLE.ORG.

Installation

1. Do not cover or block the ventilation ports on the rear of the monitor.

2. Do not install the monitor close to heat sources such as radiators or air ducts, or in a
location exposed to direct sunlight, excessive dust, mechanical vibration,or shock.

3.The apparatus shall only be used between 5° tilted forward and 22° tilted backward as
normal operation position. If the tilt angle exceeds 22°, it shall be used for wall
mounting or packaging only.

5.Disconnect the power cable from the power supply if:

5.1 You will not use the monitor for an extended period.

5.2 The cable is damaged or frayed.

5.3 The monitor has been dropped or the cabinet damaged.

5.4 A distinct change in performance indicates a need for servicing.

Maintenance

1.Clean the cabinet and controls with a soft cloth lightly moistened with a mild detergent
solution. Do not use any abrasive materials or solvents such as alcohol or benzene.

2.Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as
pens or screwdrivers, as the screen may scratch.

3.Do not insert objects or spill liquids into the ventilation ports on the monitor’s rear, as
fire, electric shock, and / or unit failure may result.

Transporting the monitor

1.When carrying the display to repair or check it, please press the "square button" behind
the support, remove the base, and then use the original carton and packing materials
to wrap the display and its accessories.

Power connection

1.Use the correct power cord for your local voltage.

2.Use an accessible outlet close to the monitor.

3.Do not allow anything to rest on the power cable.

4.Only use the power adapter attached to the monitor.

- 1 -

GETTING STARTED

Package contents

Before beginning, ensure that the carton contains the following items:

1. LCD Monitor

2. Monitor Base (the shape of base may vary according to the monitor model)

3. Power Cord (plug may vary according to the electrical standards

for your area)

4. Analog Signal Cable

5. Digital Signal Cable (optional)

6. Audio Cable (optional)

7. CD-ROM (contains user manual)

8. Quick Installation Guide

Monitor installation

1.Setting up the monitor

1.1 Take out the monitor and monitor base from the package.

1.2 Place the detached monitor base on the desk.

1.3 Grasp the monitor with both hands and securely attach

the monitor by sliding the monitor neck into the base
(Ensure the direction of the base is correct)

2.Connecting signal cable

2.1 Switch off your computer.

2.2 Connect the signal cable to the D-SUB or DVI port

(Optional: T900HD/T902HD) at the rear of the monitor and tighten
the connector screws

2.3 Connect the other end of signal cable to the computer's

VGA port and tighten the connector screws.

2.4 Note: Ensure the display setting does not exceed

1366*768, 60Hz.

3.Connecting audio cable (with audio option)

3.1 Plug the audio cable into the AUDIO port at the rear of

the monitor.

3.2 Plug the other end of the audio cable into the audio

port of your computer or other audio source.

4.Connecting power

4.1 Plug the female end of the power cord into the
POWER port at the rear of the monitor.

4.2 Plug the male end of the power cord into a power outlet.

5.Switching on

5.1 Switch on your computer.

You should now be able to see the picture. If not , refer to the trouble shooting section of
this guide.

POWER AUDIO D-SUBDVI

- 2 -