BenQ DC C30 User Manual

DC C30/C40

Digital Camera User’s Manual

Welcome

Copyright 2003 by BENQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.

Disclaimer

BENQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warran ties, merchantability or fitness for any particular purpose. Further, BENQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of this company to notify any person of such revision or changes.

*Windows, Internet Explorer and Outlook Express are trademarks of Microsoft Corporation. Others are copyrights of their respective companies or organizations.

Taking care of your camera

• Do not use your camera in the following environmental range: temperature below 0°C or above 40°C.

• Do not use or store your camera in the environments listed below: – Direct sunlight – High and dusty places – Next to the air conditioner, electric heater or other heat sources – In a closed car that is directly under the sun – Unstable locations

• If your camera becomes wet, wipe it with dry cloth as soon as possible.

• Salt or seawater may cause severe camera damage.

• Do not use organic solvents, such as alcohol, etc., to clean your camera.

• If the lens or viewfinder is dirty, use a lens brush or soft cloth to clean the lens. Do not touch the lens with your fingers.

• To prevent electrical shock, do not attempt to disassemble or repair your camera by yourself.

• Water may cause a fire or electric shock. Therefore, store your camera in a dry place.

• Do not use your camera outdoors when it is raining or snowing.

• Do not use your camera in or near water.

• If a foreign substance or water gets in your camera, please turn the power off immediately and disconnect the batteries and the transformer. Remove the foreign substance or water, and send it to the maintenance center.

• Transfer the data to the computer as soon as possible to avoid losing your image data.

Table of Contents

1. Touring your DC C30/C40.................................... 1

1.1 Checking the Package Contents....................................... 1

1.2 DC C30/C40 Components ............................................... 2

1.2.1 Front View............................................................... 2

1.2.2 Rear View ................................................................ 2

1.2.3 Left/Right Side View ............................................... 2

1.2.4 Bottom View ........................................................... 2

1.3 Attaching the Strap ........................................................... 3

2. Preparing Your DC C30/C40 for Use.................... 4

2.1 Inserting the Battery ......................................................... 4

2.2 Low Battery Indicator....................................................... 5

2.3 Turning the Power On ..................................................... 5

2.4 Setting the Date and Time................................................ 6

2.5 Setting the Date format .................................................... 6

2.6 Language Settings ............................................................. 7

2.7 TV Out Settings ................................................................ 7

2.8 Setting the Beep Sound..................................................... 8

2.9 Setting the Power Save Function ..................................... 8

2.10 Loading an SD Memory Card ........................................ 9

2.10.1 Inserting the SD Memory card............................. 9

2.10.2 Removing the SD Memory card .......................... 9

2.11 Camera Mode Setting................................................... 10

2.11.1 Photo Mode ........................................................ 10

2.11.2 Playback Mode ................................................... 10

2.11.3 Video Mode ........................................................ 10

3. Using the DC C30/C40 ........................................ 11

3.1 Previewing a Picture ....................................................... 11

3.2 Taking a Picture .............................................................. 11

3.3 Setting the LCD Display Mode ...................................... 11

3.4 Setting Image Resolution and Quality........................... 12

3.5 Using the Zoom Function.............................................. 13

3.6 Using the Flash................................................................ 14

3.7 Adjusting the Exposure ..................................................14

Englisch

Table of Contents

Englisch

4. PC Dependent Features ........................................25

5. Troubleshooting....................................................29

6. Specifications.........................................................31

7. Service information...............................................33

3.8 Using Different Metering Options .................................15

3.9 Setting the White Balance...............................................15

3.9.1 White Balance Settings Explained ........................ 16

3.10 Using Macro Mode .......................................................17

3.11 Using the Self Timer......................................................17

3.12 Using the Date Stamp Function ...................................18

3.13 Using Long Shutter Speeds ...........................................18

3.14 Recording Video Clips ..................................................19

3.15 Setting Quick View........................................................19

3.16 Viewing Pictures............................................................20

3.17 Viewing Pictures in Thumbnail Mode.........................21

3.18 Protecting Stored Images..............................................21

3.19 Erasing a Stored Image..................................................22

3.20 Erasing all Images..........................................................22

3.21 Slide Show......................................................................23

3.22 Copy to Card .................................................................23

3.23 Formatting the Camera Memory or SD Card .............23

3.24 DPOF Print Settings......................................................24

3.24.1 Print Order Setting.............................................. 24

4.1 Installing the Digital Camera Software ..........................25

4.2 Bundled Software ............................................................26

4.3 Making Connections.......................................................27

4.3.1 Viewing Images on TV.......................................... 27

4.3.2 Connecting to a Computer Using USB................ 28

Table of Contents

BenQ DC 5530 User’s Manual

C30/C40 Digital Camera

1 TOURING YOUR DC C30/C40

1.1 Checking the Package Contents

The package includes the following items:

C30/C40 Digital Camera

anual

er’s M

We lc om e

1. User's manual

2. DC C30/C40 digital camera

3. AV cable

4. USB cable

5. DC C30/C40 software CD-ROM

6. Hand strap

7. 2 x AA Batteries

Englisch

If anything is missing or appears damaged, contact your dealer. Save the packaging in the event you need to ship your camer a for service.

Touring your DC C30/C40

BenQ DC 5530 User’s Manual

DC IN 3.3V

TV OUT

1.2 DC C30/C40 Components

Englisch

1.2.1 Front View

1. Optical viewfinder

2. Shutter button

3. Lens/lens cover

4. Self-timer/AF assist lamp

5. Microphone

6. Built-in flash

1.2.2 Rear View

1. Green LED indicator

2. LCD panel

3. Menu button

4. Flash/SET button

5. Display button

6. Mode switch

7. Power button

8. Zoom buttons

9. 4-ways multi-function buttons

1.2.3 Left/Right Side View

1. DC IN port

2. USB port

3. TV out port

4 5

6 7

1.2.4 Bottom View

1. SD memory card slot

2. AA batteries compartment

Touring your DC C30/C40

BenQ DC 5530 User’s Manual

DC IN 3.3V

1.3 Attaching the Strap

To prevent accidentally dropping the camera when using your camera, always use the strap.

1. Thread the small loop of the hand strap through the strap eyelet on the camera (A).

2. Pull the large loop through the small loop until

the strap is firmly secured (

Englisch

Touring your DC C30/C40

BenQ DC 5530 User’s Manual

BATTERY

OPEN

BATTERY

OPEN

2 PREPARING YOUR DC C30/C40 FOR USE

Englisch

2.1 Inserting the Battery

The cameras powered by two AA-size alkaline batteries or rechargeable Ni-MH (min. 550 mAh/1.2V) batteries.

Follow these instructions to insert batteries into the camera.

1. Slide the battery cover in the direction of the arrow.

2. Swing the battery cover open.

3. Insert two AA-size alkaline batteries with the

positive (+) and negatime (-) poles matching the directions indicated inside the battery

cover.

4. Slide the battery cover back into the closed

position.

Preparing Your DC C30/C40 for Use

BenQ DC 5530 User’s Manual

2.2 Low Battery Indicator

A low battery indicator appears on the LCD screen when the batteries are nearly exhausted. Batteries should be replaced when the low battery indicator appears.

Notes

Do not use manganese batteries. Manganese batteries cannot supply sufficient

•

power to support camera operation.

• Replace all batteries at the same time. Never mix old and new batteries.

• Remove batteries from the camera if you do not plan on using it for more than

two weeks.

• The camera body may feel warm after extended used. The is normal.

2.3 Turning the Power On

Press the POWER button. The LED indicator begins flashing green. It takes about 3 seconds to power on the camera.

LED Indicator Power button

Englisch

Note

Set the date and time after turning the camera on for the first time. See the next section.

Preparing Your DC C30/C40 for Use

BenQ DC 5530 User’s Manual

2.4 Setting the Date and Time

Englisch

1. Turn on the camera.

2. Press the MENU button.

3. Press the UP or DOWN buttons to select the Setup Menu.

4. Press SET to enter the Setup Menu.

5. Press UP or DOWN buttons to select the Date &

Time item.

6. Press the SET button to enter the Date & Time

submenu.

7. Press UP or DOWN buttons to change the values.

8. Press the LEFT or RIGHT buttons to advance to the next field.

9. Press the SET button to save your choice and leave the Date & Time submenu.

2.5 Setting the Date format

123

Setup Menu

Enter

Date & Time

2003 10 10

YMD

1. Turn on the camera.

2. Press the MENU button.

3. Press the UP or DOWN buttons to select the Setup Menu.

123

Setup Menu

Enter

4. Press SET to enter the Setup Menu.

5. Press UP or DOWN buttons to select the Date format

item.

6. Press the SET button to enter the Date format

submenu.

7. Press the LEFT or RIGHT buttons to select the

desired date format.

8. Press SET button to save your choice and leave the

Date format submenu.

Preparing Your DC C30/C40 for Use

YMD

Date format

YMD

MDY DMY

_ _ _ _ _ __ _ _

BenQ DC 5530 User’s Manual

2.6 Language Settings

The camera can display menus and other information in a number of different languages.

1. Turn the camera on.

2. Press the MENU button.

3. Press the UP or DOWN buttons to select the Setup

Menu.

4. Press SET to enter the Setup Menu.

5. Press UP or DOWN buttons to select the Language.

6. Press the LEFT or RIGHT buttons to select the desired language.

7. Press the SET button to save your choice and leave the Language submenu.

2.7 TV Out Settings

Your camera can be connected to TV as described in

Connecting to a TV allows you to preview

Chapter 4. photos and video clips on the television screen. TV Out should be set to either NTSC or PAL depending on your region. The default setting varies according to the country of purchase.

1. Turn the camera on.

2. Press the MENU button.

3. Press the UP or DOWN buttons to select the Setup Menu.

4. Press SET to enter the Setup Menu.

5. Press the UP or DOWN buttons to select TV Out.

6. Press the LEFT or RIGHT buttons to select NTSC or PAL .

7. Press the SET button to save your choice and leave

the TV Out submenu.

Note

NTSC : America, Japan, Taiwan, Korea

•

• PAL : All o f Eu rop e

123

YMD

123

z z

Setup Menu

Enter

Language

English

Setup Menu

Enter

TV Out - NTSC

PAL

Englisch

Preparing Your DC C30/C40 for Use

BenQ DC 5530 User’s Manual

2.8 Setting the Beep Sound

Englisch

The camera beep sound can be turned on (default) or off as required.

1. Turn the camera on.

2. Press the MENU button.

3. Press the UP or DOWN buttons to select the Setup

Menu.

4. Press SET to enter the Setup Menu.

5. Press the UP or DOWN buttons to select the Beep

option.

6. Press the LEFT or RIGHT buttons to choose On or Off.

7. Press the SET button to save your option and leave the Beep submenu.

2.9 Setting the Power Save Function

To save battery power, your camera can be set to turn itself off after 1, 3 (default), or 5 minutes of inactivity. The period can be set in the Setup Menu.

1. Turn the camera on.

2. Press the MENU button.

3. Press the UP or DOWN buttons to select the Setup Menu.

4. Press SET to enter the Setup Menu.

5. Press the UP or DOWN buttons to select the Power

Save submenu.

6. Press the LEFT or RIGHT buttons to select off,1, 3 or

5 mins. The camera will turn itself off automatically if not used for the specified period. You can also turn

the function off completely.

7. Press SET button to save your option and leave the

Power Save submen u.

123

z z

Beep

ON OFF

Setup Menu

Enter

Power Save - Off

1min

3min 5min

Note

The Power Save function will work only when the camera is powered by batteries. If a DC power supply is used, the camera will not turn off automatically.

Preparing Your DC C30/C40 for Use

+ 25 hidden pages