BenQ BQ060B00 Service Manual

Product Service Manual
Service Manual for BenQ: BQ060B00 P/N: 9H.H04TW.201
Applicable for All Regions
Version: 004
Date:2010/01/13
Notice:
- For RO to input specific “Legal Requirement” in specific NS regarding to responsibility and liability statements.
- Please check BenQ’s eSupport web site, http://esupport.benq.com, to ensure that you have the most recent version of this manual.
First Edition (Dec., 2009) © Copyright BenQ Corporation 2009. All Right Reserved.
- 1 -
Content Index
Abbreviations & Acronyms ........................................................................................ 3
1. About This Manual ................................................................................................... 3
1.1. Trademark ....................................................................................................................... 3
2. Introduction ............................................................................................................... 4
2.1. RoHS (2002/95/EC) Requirements – Applied to all countries require RoHS. ...... 4
2.2. Safety Notice .................................................................................................................. 4
2.3 .Compliance Statement .................................................................................................. 4
2.4. General Descriptions ..................................................................................................... 4
2.5. Related Service Information ......................................................................................... 4
3. Product Overview ..................................................................................................... 5
3.1 Specification ..................................................................................................................... 5
4. Disassembly /Assembly ....................................................................................... 11
4.1. Exploded View .............................................................................................................. 11
4.2. Disassembly /Assembly .............................................................................................. 13
4.4. Packing .......................................................................................................................... 15
5. Level 1 Cosmetic / Appearance / Alignment Service ................................... 19
5.1 Software / Firmware Upgrade Process ...................................................................... 19
5.1.1. without Rescue OS or Old-Uboot................................................................ 19
5.1.2. Put download images in SD card ................................................................ 20
5.1.3. Start SD Download .......................................................................................... 21
6. Level 2 Circuit Board and Standard Parts Replacement ............................. 23
6.1 Block diagram ................................................................................................................ 23
6.2. Trouble Shooting Guide .............................................................................................. 25
- 2 -
Abbreviations & Acronyms
1. About This Manual
This manual contains information about maintenance and service of BenQ products. Use this manual to perform diagnostics tests, troubleshoot problems, and align the BenQ product.
1.1. Trademark
The following terms are trademarks of BenQ Corporation: BenQ
Importance
Only trained service personnel who are familiar with this BenQ Product shall perform service or maintenance to it. Before performing any maintenance or service, the engineer MUST read the “Safety Note”.
- 3 -
2. Introduction
This section contains general service information, please read through carefully. It should be stored for easy access place for quick reference.
2.1. RoHS (2002/95/EC) Requirements – Applied to all countries require RoHS.
The RoHS (Restriction of Hazardous Substance in Electrical and Electronic Equipment Directive) is a legal requirement by EU (European Union) for the global electronics industry which sold in EU and some counties also require this requirement. Any electrical and electronics products launched in the market after June 2006 should meet this RoHS requirements. Products launched in the market before June 2006 are not required to compliant with RoHS parts. If the original parts are not RoHS complaints, the replacement parts can be non ROHS complaints, but if the original parts are RoHS compliant, the replacement parts MUST be RoHS complaints. If the product service or maintenance require replacing any parts, please confirming the RoHS requirement before replace them.
2.2. Safety Notice
1. Make sure your working environment is dry and clean, and meets all government safety requirements.
2. Ensure that other persons are safe while you are servicing the product. DO NOT perform any action that may cause a hazard to the customer or make the product unsafe.
3. Use proper safety devices to ensure your personal safety.
4. Always use approved tools and test equipment for servicing.
5. Never assume the product’s power is disconnected from the mains power supply. Check that it is disconnected before opening the product’s cabinet.
6. Modules containing electrical components are sensitive to electrostatic discharge (ESD). Follow ESD safety procedures while handling these parts.
7. Some products contain more than one battery. Do not disassemble any battery, or expose it to high temperatures such as throwing into fire, or it may explode.
8. Refer to government requirements for battery recycling or disposal.
2.3 .Compliance Statement
Caution: This Optical Storage Product contains a Laser device. Refer to the product specifications and your local Laser Safety Compliance Requirements.
2.4. General Descriptions
This Service Manual contains general information. There are 3 levels of service:
Level 1: Cosmetic / Appearance / Alignment Service Level 2: Circuit Board or Standard Parts Replacement Level 3: Component Repair to Circuit Boards
2.5. Related Service Information
BenQ Global Service Website: http://www.benq.com/support/
eSupport Website: http://esupport.benq.com/v2
- 4 -
3. Product Overview
Item
Unit
Specification
Note
General Information
Screen Size
inch
6(Diagonal)
A060SE02 V2
Display Resolution
dot
800(H)x600(V)
Overall Dimension
mm
131.4(H)x105.4(V)x1.86(T)
Active Area
mm
122.4(H)x90.6(V)
Dot Pitch
mm
0.153(H)x0.151(V)
Gray Level
--
16
Weight
g
52
Touch Panel
Capacitive Type
90% transmitting rate
Touch Scan Rate
Hz
Up to 85 Hz
Optical Specification
Reflectance R 30
Contrast Ratio
CR
6:1
Response time Tr Tf
ms
300 300
Category
Item
Specification
Remark
Electrical
SOC
S3C2416 ARM 9 400MHz
65nm process; 330-FBGA,
0.65mm pitch
Memory Mobile DDR
128 MB
16-bit data bus I/F
SLC NAND Flash
NA
MLC NAND Flash
2 GB
Samsung Movi-Nand
Connector USB Host
USB 1.1 Host
A type
USB Device
USB 2.0 Device
Micro USB-B type
SD slot
Yes
3.1 Specification
3.1.1 Introduction
This is a code name for e-Book reader device which is targeted at the specific book reading
purpose. It adopts e-paper panel as the main display to reach low power consumption and get better feeling when reading. The embedded QReader can support several popular e-book formats, like DPF, ePub, Html and several image formats, like JPEG, PNG and BMP. This e­book device is capable to communicate to a Wifi Router or 3G Station directly. User can easily download the content from Internet or operator service platform. The User Interface uses AUO capacitive in-cell touch and enables the handwriting capability. User can add a bookmark or make a note easily when reading. The whole system adopts mobile technology and materials to reach lowest power consumption and slim industrial design.
3.1.2 Operational Specification
3.1.2.1 Feature List-Electrical
- 5 -
Earphone jack
Yes
Audio Amplifier
n/a
Speaker
Single
Sensors Tilt sensor
n/a G-sensor
n/a
Battery
Charger
Yes
Build-in battery
1530 mAh
Standby mode lifecycle
15 days
Reading mode Page
Above 7500 Pages
WiFi mode lifecycle
2.45 ~ 3.22 Hours
HSPA+ mode lifecycle
1.53 ~2.73 Hours
LEDs
Power *1; System Status
Keys
Menu
Yes
Page up
Yes
Page down
Yes
Vol + (volume up)
Yes
Vol – (volume down)
Yes
Search
Yes
Back
Yes
System wake-up / Off
Tact Switch
Connectivity
WiFi 802.11b/g
WEP, TKIP, AES-CCMP
MTK/ USI WM-G-MT-03; SPI I/F
2.5G GPRS
External
TBD
3G HSPA
External
TBD
3.5G HSDPA
External
TBD
3.75G HSUPA
External
TBD
- 6 -
3.1.2.2 Wireless LAN Solution
- 7 -
3.1.3 Software Features
Item
Description
Specification
Remark
OS
Description
V 2.6.21
Middleware
Qt
V4.5.1
Document format
PDF (Adobe)
Yes
Adobe Mobile Reader 9
HTML
Yes
Webkit
TXT
Yes
Qisda
EPUB
Yes
Adobe Mobile Reader 9
MOBI
No
Image Format
JPEG
*.jpg
PNG
*.png
BMP
*.bmp
Audio Format
MP3
Yes (audio book)
AAC
n/a
e-Book DRM
ePub, PDF
Adobe CS4
UI Language
EMEA
English, French, German, Italian, Spanish, Portuguese, Dutch,
Default: English, TC, SC
CJK
Korean, Chinese Simplified, Chinese Traditional, and Japanese
NAFTA (default)
English; French; Spanish
System Status Bar
Time
24hrs
HH : MM
Battery Status
Charging/Low battery/l/2/3 levels
Wifi Signal Strength
No signal/1/2/3/4/5 levels
Reader Mode
Font size adjustment
Yes, 3 font sizes
(Small, Medium, Large)
Book list
Recent (download/import) books, Unread books, Books by title, Books by Author, Books by Date, My favorite books
Bookmarks
Add, Delete, List, View
Note Tool (Footnote)
Yes
Software keyboard
English, Number, Symbols
Audio book (TTS)
n/a
File management
Yes
Background music
Yes
Book Search
Yes
Keyword Search
Yes
Favorite List
Yes
3.1.3.1 General Features Summary
- 8 -
Picture Mode
Photo information
Yes
Next / Prev.
Yes
Rotate
Manual/Auto
Audio Mode
File management
Yes
Music information
Yes
File Sorting
ID3 Tag/File Name
Next/ Prev.
Yes
Repeat/Random
Yes
Stop/Pause/Play
Yes
Volume control
Mute/1/2/3/4/5
3G mode
Browser
Yes
Default link address: Google
Google Book(Search and Download)
Yes
Wifi Mode
Browser
Yes
Default link address: Google
Google Book(Search and Download)
Yes
Low battery warning
Yes
3.45V for warning message
3.6V for system booting
Power Management Setting
Yes
When enabling PM, device will enter sleeping mode after 30 seconds .
WiFi setting
WEP/WPA
Screensaver Setting
10s/30s/1m/10m/30m
FW upgrade
Yes
SD Card Mode
Device information
0. Linux version
1.File system version
2.Kenerl Version
3.Boot code version
4.Waveform(LUT) version
5.T-CON firmware version
6.Temperature
7.DRAM size 8Free Flash Memory Size
Special function
Handwriting(Stylus)
Optional
Capacitive Pen(ψ >=8mm)
UI Rotation
Optional
±90°
Image Refresh
Button Trigger
Erase Residual Image
Touch Panel Calibration
SD card
To be executed after Assembling
- 9 -
3.1.3.2 Language Support Table
Language
TW
Japan
China
Chinese(Traditional)
*
*
Chinese(Simplified)
*
*
Danish
Japanese
*
Russian
English
* * *
Norway
Swedish
Thai
- 10 -
Loading...
+ 23 hidden pages