Benq 9H.JFP77.13E User Manual

W1210ST Digital Projector Home Cinema Series

User Manual

Important safety instructions.......3

Overview..........................................6

Projector features....................................6

Shipping contents......................................7

Standard accessories................. .. .. .. .. .. .. ... .. .. . 7

Optional accessories................... .. .. .. .. .. ... .. .. . 7

Projector exterior view..........................8

Controls and functions............................9

Control panel ................................................. 9

Remote control............................................10

Installation.....................................12

Choosing a location...............................12

Obtaining a preferred projected

image size.................................................13

Projection dimensions........................ .. ... .. .13

Connection...................................14

Connecting with video equipment.....14

Connecting HDMI devices.........................14

Connecting smart devices .........................14

Connecting a computer.............................15

Operation...................................... 16

Starting up the projector......................16

Shutting down the projector...............18

Securing the projector..........................18

Using a security cable lock ........................18

Utilizing the password function.......... ..... .18

Selecting an input source......................21

Renaming an input source.........................21

Adjusting the projected image.............22

Adjusting the projection angle..................22

Auto-adjusting the image...........................22

Fine-tuning the image size and clarity.....22

Correcting keystone...................................23

connected.......................................................26

Basic OSD menu - without input signals

connected.......................................................29

Using the Advanced OSD menu.........30

Picture menu...............................................31

Audio Setup menu....................................35

Display menu........................................... .. ..36

System Setup : Basic menu........ .. .. .. .. ..38

System Setup : Advanced menu........ 39

Information menu.....................................41

Advanced OSD menu structure............42

Maintenance..................................44

Care of the projector...........................44

Lamp information ................................... 45

Getting to know the lamp hour................45

Extending lamp life.......................................45

Timing of replacing the lamp.....................46

Replacing the lamp.......................................47

Indicators.................................................49

Troubleshooting.....................................51

Specifications...........................................52

Projector specifications............. .. .. .. .. .. .. .. .. ..52

Dimensions....................................................53

Ceiling mount installation............... .. .. .. .. .. ..53

Timing chart.............. .... .. .. .. ... .. ......................54

Warranty and Copyright

information....................................59

Warranty ................................................. 59

Disclaimer................................................59

Menu Functions............................24

About the OSD Menus.........................24

Using the Basic OSD menu................26

Basic OSD menu - with input signals

2 Table of contents

Important safety instructions

3000 m

(10000 ft.)

0 m

(0 ft.)

Your projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that you follow the instructions mentioned in this manual and marked on the product.

1. Please read this user manual before you operate your projector. Keep this manual in a safe place for future reference.

2. Always place the projector on a level, horizontal surface during operation.

- Do not place the projector on an unstable cart,

stand, or table as it may fall and be damaged.

- Do not place inflammables near the projector.

- Do not use if tilted at an angle of more than 10

degrees left to right, nor at angle of more than 15 degrees front to back.

3. Do not store the projector on end v ertically. Doing so may cause the projector to fall over, causing injury or resulting in damage.

4. Do not place the projector in any of the following enviro nments:

- Space that is poorly ventilated or confined.

Allow at least 50 cm clearance from walls and free flow of air around the projector.

- Locations where temperatures may

become excessively high, such as the ins ide of a car with all windows closed.

- Locations where excessive humidity, dust,

or cigarette smoke ma y contaminate optical components, shorten the projector’s lifespan and darken the screen.

- Locations near fire alarms.

- Locations with an ambient temperature

above 35°C/95°F.

- Locations where the altitudes are higher

than 3000 m (10000 feet).

Important safety instructions

5. Do not block the vents while the projector is on (even in standby mode).

- Do not cover the projecto r with any item.

- Do not place the projector on a blanket,

bedding or any other soft surface.

9. Do not look straight into the projector lens during operation. It may harm your sight.

6. In areas where the mains power supply voltage may fluctuate by ±10 volts, it is recommended that you connect the projector through a power stabilizer, surge protector or uninterruptible power supply (UPS) as appropriate to your situation.

7. Do not step on the projector or place any objects upon it.

8. Do not place liquids near or on the projector. Liquids spilled into the projector will void your warranty. If the projector does become wet, disconnect it from the power outlet and contact BenQ to have the projector repaired.

10. Do not operate the projector lamp beyond the rated lamp life. Excessive operation of lamps beyond the rated life could cause a la mp to break on rare occasions.

11. The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement.

12. Never attempt to replace the lamp assembly until the projector has cooled down and is unplugged from the power supply.

Important safety instructions

13. This projector is capable of displaying inverted images for ceiling mount installation. Use only BenQ's Ceiling Mount Kit for mounting.

15. When you think service or repair is required, take the projector only to a suitably qualified technician.

Ceiling mounting the projector

If you intend to mount your projector on the ceiling, we strongly recommend that you use a proper fitting BenQ projector ceiling mount kit and ensure it is securely and safely installed.

If you use a non-BenQ brand projector ceiling mount kit, there is a safety risk that the projector may fall from the ceiling due to an improper attachment through the use of the wrong gauge or length screws.

You can purchase a BenQ projector ceiling mount kit from the place you purchased your BenQ projector. BenQ recommends that you a lso pur chase a separate Kensington lock compatible security cab le and attach it securely to both the Kensington lock slot on the projector and the base of the ceiling mount bracket. This will perform the secondary role of restraining the projector should its attachment to the mounting bracket become loose.

14. Do not attempt to disassemble this projector. There are dangerous high voltages inside which may cause death if you should come into co ntact with live parts. The only user serviceable part is the lamp. See page 47.

Under no circumstances should you ever undo or remove any other covers. Refer servicing only to suitably qualified professional service personnel.

Moisture condensation

Never operate the projector immediately after moving it from a cold location to a hot location. When the projector is exposed to such a change in temperature, moisture may condense on the crucial internal parts. To prevent the projector from possible damage, do not use the projector for at least 2 hours when there is a sudden change in temperature.

Avoid volatile liquids

Do not use volatile liquids, such as insecticide or certain types of cleaner, near the projector. Do not have rubber or plastic products touching the projector for a long time. They will lea v e marks on the finish. If cleaning with a chemically treated cloth, be sure to follow the cleaning product’s safety instructions.

Disposal

This product contains the following materials which are harmful to human bodies and environment.

• Lead, which is contained in solder.

• Mercury, which is used in the lamp. To dispose of the product or used lamps, consult

your local environment authorities for regulations.

Please keep the original packing for possible future shipment. If you need to pack your

projector after use, adjust the projection lens to an appropriate position, put the lens cushion around the lens, and fit the lens cushion and projector cushion together to prevent damage during transportation.

Important safety instructions

Overview

Projector f eatures

• Full HD compatible

The projector is compatible with Standard Definition TV (SDTV) 480i, 576i, Enhanced Definition television (EDTV) 480p, 576p and High Definition TV (HDTV) 720p, 1080i/p 60Hz formats, with the 1080p format providing a true 1:1 image reproduction.

• High picture quality

The projector provides excellent picture quality due to its high resolution, excellent home theater brightness, high contrast ratio, vivid color and rich gray-scale reproduction.

• High brightness

The projector features super high brightness to achieve excellent picture quality in ambient light conditions, outperforming ordinary projectors.

• Vivid color reproduction

The projector features a 6-segment color wheel to produce realistic color depth and range unattainable with lesser segment color wheels.

• Rich gray-scale

When viewed in a dark environment, the automatic gamma control provides excellent gray-scale display which reveals details in shadows and in night or dark scenes.

• Dual OSD

Two types of OSD menus are designed for different usage scenarios: the Basic OSD is intuitive and easy, while the Advanced OSD offers full range of advanced adjustments.

• Wide variety of inputs and video formats

The projector supports a wide variety of inputs for connection to your video and computer equipment, including personal computer (both Mac and PC), HDMI source, and an output trigger for connection to automated screen and environment lighting systems.

• ISF certified calibration control

To reach a higher standard of performance, the projector incorporates ISF NIGHT and ISF DAY mode settings in its OSD menus, which requires professional calibration service from authorized ISF installers.

• 3D function

To enjoy the 3D movies, videos, and sporting events in a more realistic way by presenting the depth of the images through HDMI.

• Built-in chamber speakers with audio enhancer

Built-in speakers providing mixed mono audio when an audio input is connected.

• SmartEco

SmartEco™ technology saves lamp power consumption up to 70% depending on the content brightness level when SmartEco mode is selected.

Overview

Shipping contents

Projector

Remote control

Batteries

Power cable

Warranty card*

User manual CD

Quick start guide

Carry bag

Wireless FHD Kit (WDP02)

Carefully unpack and verify that you have the items below. Some of the items may not be available depending on your region of purchase. Please check with your place of purchase.

Standard accessories

Some of the accessories may vary from region to region.

* The warranty card is only supplied in some specific regions. Please consult your dealer for detailed information.

Optional accessories

Overview

Projector exterior view

See Connecting with video equipment for connection details.

Front and upper side view

Rear and lower side view

13 1917

14 15 16

2524 25

6 7

1. Control panel (See Control panel for details.)

2. Lamp cover

3. Vent (heated air exhaust)

4. Quick-release button

5. Lens cap

6. Lens compartment cover

7. Focus and Zoom rings

8. Vent (cool air intake)

9. Front IR sensor

10.Projection lens

11.HDMI input port

12.MHL/HDMI dual mode port

Connects to MHL or HDMI compatible devices and charges the connected MHL compatible device as long as power is fed to the projector.

13.12VDC output terminal

Triggers external devices such as an electric

screen or light control, etc.

14.USB Type-A port

Charges the receiver box of the Wir eless FHD Kit (optional accessory).

15.USB Mini-B port

Used for service.

16.RGB (PC)/Component video (YPbPr/

YCbCr) signal input jack

17.RS-232 control port

Interfaces with a PC or home theater control/ automation system.

18.Audio input jack

19.Audio output jack

20.Speaker grills

21.Rear adjuster feet

22.AC Power cable inlet

23.Kensington lock slot

24.Wireless FHD Kit mount hole (WDP02)

25.Ceiling mount holes

Overview

Controls and functions

Control panel

1 2

10 13

1. Focus ring

Adjusts the focus of the projected image.

2. Zoom ring

Adjusts the size of the image.

3. TEMPerature warning light

Lights up red if the projector's temperature becomes too high.

4. OK

Confirms the selected On-Screen Display (OSD) menu item.

5. POWER indicator light

Lights up or flashes when the projector is under operation.

6. POWER Toggles the projector between standby mode

and on.

7. Left /

• Decreases the projector audio volume.

• When the Keystone window is displayed, manually corrects distorted images resulting from an angled projection.

• When the On-Screen Displa y (OSD) menu is activated, the #7, #10, and #12 keys ar e used as directional arrows to select the desired menu items and to make adjustments.

8. BACK

Goes back to the previous OSD menu, exits and saves menu settings.

9. LAMP indicator light

Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem.

10.Keystone/Arrow keys ( / , / )

Manually corrects distorted images resulting from an angled projection. When the On-Screen Display (OSD) menu is activated, the #7, #10, and #12 keys are used as directional arrows to select the desired menu items and to make adjustments.

11.Top IR remote sensor

12. Right /

• Increases the projector audio volume.

• When the Keystone window is displayed, manually corrects distorted images resulting from an angled projection.

• When the On-Screen Display (OSD) menu is activated, the #7, #10, and #12 keys ar e used as directional arrows to select the desired menu items and to make adjustments.

13.SOURCE

Displays the source selection bar.

14.MENU

• Accesses the On-Screen Display (OSD) menu.

• Exits and saves menu settings.

Overview

Remote control

3 4

6 7

8 9

1. ON, OFF Toggles the projector between on and off

modes.

2. 3D, INVERT

Launches the 3D menu and toggles the inv ert function between on and off.

3. Arrow keys ( Left, Right, Up,

Down)

When the On-Screen Display (OSD) menu is activated, these keys are used as directional arrows to select the desired menu items and to make adjustments.

4. OK

Confirms the selected OSD menu item.

5. BACK

Goes back to the previous OSD menu, exits and saves menu settings.

12 16

6. MENU

• Accesses the On-Screen Display (OSD) menu.

• Exits and saves menu settings.

7. Volume keys

• : Toggles projector audio between on and off.

• : Decreases the projector audio volume.

• : Increases the projector audio volume.

8. KEYSTONE

Launches the Keystone wi ndo w. Use or to manually correct distorted images resulting from an angled projection.

9. MODE

Selects an available picture mode.

10.LIGHT

The LED backlight lights up and stays on for approximately 10 seconds when pressing any key on the remote control. Pressing any other keys within 10 second again turns the LED backlight off.

11.AUTO

Automatically determines the best picture timings for the displayed image.

12.ECO BLANK

Used to blank the screen picture.

13.SOURCE

Displays the source selection bar.

14.Picture quality adjustment keys

These function keys perform the same tasks as specified in the OSD menu.

15.FINE TUNE

Displays the Color Temperature Fine Tuning window. See Color Temperature Fine Tuning for details.

16.Unavailable keys

These keys are not available: PIP and SWAP.

17.HDMI CEC-compatible device control keys ( Backward, Play, Forward,

Rewind, Stop, Fast forward)

Goes to the previous file/Plays/Goes to the next file/Rewinds/Stops/Fast-forwards during media playback. Only available when controlling your HDMI CEC-compatible devices.

The key does not pause the video.

Overview

Installing/replacing the remote control batteries

• Operating the projector from the front

• Operating the projector from the top

1. Press and slide open the battery cover as illustrated.

2. Remove the ol d batteries (if applicable ) and install two AAA batteri es. Mak e sure that the positive and negative ends are positioned correctly as illustrated.

3. Slide the battery cover back until it clicks into place.

• Avoid leaving the remote control and batteries in an excessive heat or humid environment like the kitchen, bathroom, sauna, sunroom or in a closed car.

• Replace only with the same or equivalent type recommended by the battery manufacturer.

• Dispose of the used batteries according to the manufacturer's instructions and local environment regulations for your region.

• Never throw the batteries into a fire. There may be danger of an explosion.

• If the batteries are drained or if you will not be using the r emote contr ol f or an e xtended per iod of time, remove the batteries to avoid damage to the remote control from possible battery leakage.

Remote control effective range

The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensor(s) to function correctly. The distance between the remote control and the sensor(s) should not exceed 8 meters (~ 26 feet).

Make sure that there are no obstacles betw een the r emote contr ol and the IR sensor(s) on the projector.

Overview

Installation

Choosing a location

Before choosing an installation location for your projector, take the following factors into consideration:

• Size and position of your screen

• Electrical outlet location

• Location and distance between the projector and the rest of your equipment

You can install your projector in the following ways.

1. Front:

Select this location with the projector placed near the floor in front of the screen.

This is the most common way to position the projector for quick setup and portability.

Turn on the projector and make the following settings:

MENU > Settings or System Setup : Basic > Projector Position > Front

2. Rear:

Select this location with the projector placed near the floor behind the screen.

Turn on the projector and make the following settings:

MENU > Settings or System Setup : Basic > Projector Position > Rear

3. Front Ceiling:

Select this location with the projector suspended from the ceiling in front of the screen.

Turn on the projector and make the following settings:

MENU > Settings or System Setup : Basic > Projector Position > Front Ceiling

Purchase the BenQ Projector Ceiling Mount

Kit from your dealer to mount y our projector on the ceiling.

4. Rear Ceiling:

Select this location with the projector suspended from the ceiling behind the screen.

Turn on the projector and make the following settings:

MENU > Settings or System Setup : Basic > Projector Position > Rear Ceiling

A special rear projection screen is required. A special rear projection screen and the

BenQ Projector Ceiling Mount Kit are required.

Installation

Obtaining a preferred projected image size

Projection distance

Center of lens

Screen

Offset lens position

16:9 Screen diagonal

• The screen aspect ratio is 16:9 and the projected picture is in 16:9 aspect ratio

The projected image size is determined by the distance from the projector lens to the screen, the zoom setting, and the video format.

Projection dimensions

Use the illustration and the table below to help you determine the projection distance.

Screen size Projection distance (mm)

Diagonal

Inch mm (max. zoom) (min. zoom)

60 1524 747 1328 917 1009 1102 19 70 1778 872 1550 1069 1178 1286 22 80 2032 996 1771 1222 1346 1470 25

90 2286 1121 1992 1375 1514 1654 28 100 2540 1245 2214 1528 1682 1837 31 110 2794 1370 2435 1680 1851 2021 34 120 3048 1494 2657 1833 2019 2205 37 140 3556 1743 3099 2139 2355 2572 44 160 4064 1992 3542 2444 2692 2940 50 180 4572 2241 3985 2750 3028 3307 56

All measurements are appr oximate and may vary from the actual sizes. If you want a permanent installation of the projector, we recommend that you use the actual projector to physically test the projection size, distance, and the projector's optical characteristics prior to the installation. This helps you determine the exact mounting position which best suits your installation.

H (mm) W (mm)

Min. distance

Average

Max. distance

Offset lens

position (mm)

Installation

Connection

HDMI cable

HDMI device: DVD player, digital tuner, etc.

To make sure you select a correct input source type for the HDMI signal, see HDMI Settings for details.

When connecting a signal source to the projector, be sure to:

1. Turn all equipment off before making any connections.

2. Use the correct signal cables for each source.

3. Make sure the cables are firmly inserted.

• In the connection illustrations shown below, some cables may not be included with the projector (see

Shipping contents). They are commercially available from electronics stores.

Connecting with video equipment

You need only connect the projector to a video source device using just one of the connecting methods. Each video source provides different picture quality. The method you choose most likely depends upon the availability of matching terminals on both the projector and the video source device as described below:

Term inal name

HDMI1

HDMI2/MHL

PC (D-SUB)

In the connection illustrations shown below, some cables may not be included with the projector (see

Shipping contents). They are commercially available from electronics stores.

Termi nal

appearance

Reference Picture quality

• Connecting HDMI devices

• Connecting smart devices

Connecting a computer

Best

Better

Connecting HDMI devices

HDMI (High-Definition Multimedia Interface) supports uncompressed video data transmission between compatible devices like DTV tuners, DVD players, Blu-ray players and displays over a single cable. You should use an HDMI cable when making a connection between the projector and HDMI devices.

Connecting smart devices

The projector can display contents directly from an MHL compatible smart device. Using an HDMI to Micro USB cable or HDMI to Micro USB adaptor, you can connect your smart devices to the projector and then enjoy your contents on the big screen.

Some smart devices may not be compatible to the cable that you use. Please consult the manufacturer of your smart device for detailed information.

Connection

• Using an HDMI to Micro USB cable

HDMI cable

HDMI to Micro USB cable

Power

HDMI to Micro USB adaptor

VGA cable

Laptop or desktop computer

Speakers

Audio cable

1. Connect one end of the HDMI to Micro USB cable to the HDMI input connector on the projector.

2. Connect the other end of the HDMI to Micro USB cable to the Micro USB output socket on your smart device.

• Using an HDMI to Micro USB adaptor and an HDMI cable

1. Connect one end of the HDMI cable to the HDMI input connector on the projector.

2. Connect the other end of the HDMI cable to the HDMI input socket on the adaptor.

3. Connect the other end of the adaptor to the Micro USB output socket on your smart device.

After connections, switch to the HDMI2/MHL input source. To switch input signal, see Selecting an

input source for details.

Connecting a computer

Connect the projector to a computer with a VGA cable.

Many laptops do not turn on their external video ports when connected to a projector. Usually a key combination like Fn + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/LCD or a function key with a monitor symbol on the laptop. Press Fn and the labeled function key simultaneously. Refer to your laptop

's documentation to discover your laptop's key combination.

Connection

Operation

Starting up the projector

1. Plug the power cable into the projector and a po w er outlet. Turn on the power outlet switch (where fitted). The POWER indicator light on the projector lights orange after power has been applied.

Please use the supplied power cable to avoid possible dangers such as electric shock and fire.

2. Press on the projector or on the remote control to start the projector. As soon as the lamp lights up, a Power On Tone

will be heard. The POWER indicator light flashes green and stays green when the projector is on. The fans start operating, and a start-up image is displayed on the screen while it warms up. The projector does not respond to further commands while it is warming up.

To turn off the ring tone, see Power On/Off Ring Tone for details.

3. If this is the first time you turn on the projector, the setup wizard appears to guide you through setting up the projector. If you have already done this, skip this step and move on to step 5.

• Use the arrow keys ( ///) on the projector or remote control to move through the menu items.

• Use OK to confirm the selected menu item.

The Setup Wizard screenshots below are for reference only and may differ from the actual design.

Step 1: Specify Projector Position.

For more information about pr ojector

position, see Choosing a location.

Step 2: Specify OSD Language.

Operation

Step 3: Specify Keystone.

For more information about k eystone,

see Correcting keystone.

Step 4: Specify Auto Source.

Select On if you want the projector to

always search for available signals automatically when the projector is turned on.

Step 5: Specify Menu Type.

For more information about menu

types, see About the OSD Menus.

Now you’ve completed the initial setup.

4. If you are prompted to enter the password, use the arrow keys on the projector or remote control to enter a six-digit password. See Utilizing the password function for details.

5. Switch on the connected equipment.

6. The projector starts to search for available input signals. The current input signal being scanned is displayed on the screen. If the projector does not detect a valid signal, the "No Signal" message appears. You may press SOURCE on the projector or remote control to select your desired input signal.

7. If the horizontal frequency of the input source exceeds the range of the projector, the "No Signal" message is displayed on the scr een. It will r emain on-scr een until you change the horizontal frequency of the input source to an appropriate one.

Operation

Shutting down the projector

1. Press on the projector or on the remote control. The projector displays a shutdown confirmation message.

2. Press or a second time. flashes orange and the fans run for about two minutes to cool the lamp. The projector doesn’t respond to any commands during the cooling process.

3. When the cooling process ends, a "Power Off Ring Tone" will be heard, and the POWER indicator light will show a solid orange.

To turn off the ring tone, see Power On/Off Ring Tone for details.

If the projector will not be used for an extended period, unplug the power cable from the power outlet.

Avoid turning on the projector immediately after turning it off as excessive heat may shorten lamp life. The actual lamp life may vary due to different environmental conditions and usage.

The POWER indicator light

Securing the projector

Using a security cable lock

The projector has to be installed in a safe place to pr event theft. Otherwise, purchase a lock, such as the Kensington lock, to secur e the pr ojector. You can locate a Kensington lock slot on the pr ojector. See item 23 on page 8 for details.

A Kensington security cable lock is usually a combination of key(s) and the lock. Refer to the lock's documentation to learn how to use it.

Utilizing the password function

For security purposes and to prevent unauthorized use, you may set up password security via the OnScreen Display (OSD) menu. Once the password is set and the function is enabled, the projector is password-protected. Users who do not know the correct password may not use the projector.

You will be inconvenienced if you enable the password function y et f orget the passw or d someho w. Do make a note of your password, and keep the note in a safe place for later recall.

Setting a password

Once a password has been set and the power on lock is enabled, the projector cannot be used unless the correct password is entered every time the projector is started.

To do this, first and foremost, you have to access the Advanced OSD menu (see page 25 for details).

1. Go to System Setup : Advanced > Password

2. Select Change Password and press OK to display the Input New Password window.

to display the Password window.

Operation

+ 41 hidden pages