Bulletin No: PNU-184 Effective Date: January 13, 2014 Cancels: NA Page: 1 of 4
Subject: Bendix® Slack Adjuster Service Replacement Part Numbers Announced
Bendix announces that service Bendix® ASA-5® slack adjusters are being obsoleted and will remain active and
saleable only while supplies last. Once the inventory is depleted, all orders placed will be lled by the equivalent Bendix®
Versajust® LS™ Slack Adjuster with the WearMax™ Clutch. This Bulletin shows the service Bendix Versajust LS slack
adjuster part number replacements, as well some new service Versajust LS slack adjuster units for use with welded
clevis chambers. Please use the new part numbers for future orders. See Part Number Update PNU-186 for OEM
replacement part numbers.
See Sections A and B to nd the Bendix Versajust LS equivalent replacements for Bendix ASA-5 slack adjusters.
See Section C for new Bendix Versajust LS slack adjusters.
Bendix Versajust LS
™
Quick-Connect
Style Yoke Kit
Adapter
Thread
Bendix Versajust LS
Easy-On
Style Yoke
NOTE: ASA-5 and Versajust LS Slack Adjuster YOKES
are NOT INTERCHANGEABLE.
Bendix® ASA-5
Automatic Slack
Adjuster Exterior
Part Number Etched Here
®
Bendix® Versajust
Automatic Slack Adjuster
Exterior
®
LS
Section A — Service Slack Adjusters WITH Yokes:
Numeric Changeover from Bendix® ASA-5® to Bendix® Versajust® LS™ slack adjuster equivalents.
Long Pin shown
(Short Pin used for
welded clevises)
Adapter Thread
1.3 inches*
Yoke
Arm
Length
Lube Fitting
Spline (Select by
diameter and number
of teeth)
*Note: Pin Centers are 1.3 inches
apart for Versajust LS Slack
Adjusters - for ASA-5 Slack
Adjusters the distance is 1 inch.
(0° shown)
Obsolete Bendix®
ASA-5® Slack
Adjuster
Order Bendix
Versajust
Slack Adjuster
K020316K041877
K020317K043197
K022170K034076
K022171K047457
K022172K046175
65163K102277
65164K041871
65166K102419
65167K051512
65168K050036
65169K102424
65170K041870
65172K041876
65173K050081
®
LS™
®
Obsolete Bendix®
ASA-5® Slack
Adjuster
Order Bendix
Versajust
Slack Adjuster
65174K043197
65175K041877
65176K041877
65177K102371
65178K102369
65179K102372
65182K102369
65221K102370
65244K102422
65245K102427
65247K043197
65274K051467
®
LS™
®
Obsolete Bendix®
ASA-5® Slack
Adjuster
Order Bendix
Versajust
Slack Adjuster
®
LS™
®
65335K051467
65344K041876
65403K051512
65488K102425
65508K050079
65700K041870
801351K102367
801354K095826
801355K102370
801358K041870
- K043124 (new)
- K102426 (new)
65276K102428
65306K102423
Bulletin No: PNU-184 Effective Date: January 13, 2014 Cancels: NA Page: 2 of 4
Section B — Service Slack Adjusters WITH Yokes:
Bendix® ASA-5® to Bendix® Versajust® LS™ slack adjuster equivalents by feature.
■
ALL HAVE A 45 DEGREE LUBE FITTING
Arm Length
5.0"
5.5"
6.0"
Camshaft
Spline
(Dia.- Teeth)
1.25" - 241/2"
1.50" - 10
1.50" - 28
1.25" - 10
1.25" - 24
1.50" - 10
1.50" - 28
1.63" - 375/8"Easy On
1.50" - 105/8"Easy On065172K041876
1.50" - 28
1.63" - 375/8"
Adapter
Thread
1/2"Easy On65168K050036
5/8"Easy On65508K050079
1/2"Easy On65173K050081
5/8"Quick Connect801354K095826
1/2"
5/8"
1/2"
5/8"Easy On
1/2"Easy On- 5/8 Offset065169K102424
5/8"
1/2"Easy On
5/8"
1/2"Easy On- 5/8 Offset065276K102428
5/8"
Yoke Style
Easy OnK022172K046175
Easy On - 5/8 Offset65166K102419
Easy On065164K041871
Easy On- 5/8 Offset065244K102422
Easy On- 5/8 Offset065163K102277
Quick Connect801351K102367
Easy On
Easy On- 5/8 Offset065306K102423
Easy On
Easy On- 5/8 Offset065488K102425
Easy On
Easy On- 5/8 Offset065245K102427
Quick ConnectK022170K034076
Easy On
Quick ConnectK022171K047457
Easy On065177K102371
Quick Connect065179K102372
Obsolete Bendix® ASA-5®
Slack Adjuster
Service Part No.
065274
065335
065167
065403
801358
065700
065221K102370
801355K102370
065174
K020317
065178
065182
065175
K020316
Order Bendix® Versajust® LS™
Slack Adjuster
Service Part No.
K051467
K051512
K041870065170
K043197065247
K102369
K041877065176
Bulletin No: PNU-184 Effective Date: January 13, 2014 Cancels: NA Page: 3 of 4
Section C — Service Bendix® Versajust® LS™ Slack Adjusters WITHOUT Yokes
These are for use with welded clevis chambers with 1.3 inch pin-to-pin spacing.
1.3 inches
1.3 inches
Welded Clevis Chamber
Bendix Versajust LS Slack
Adjuster - No Yoke Version
Bendix® Versajust® LS™ Slack
Adjuster - No Yoke Version
Service New Bendix Versajust LS Slack Adjusters WITHOUT Yokes:
Arm
Length
5.0"
5.5"
6.0"
Bendix® Versajust® LS™
Slack Adjuster
Service New Part Number
K0961971.25" - 24
K0961991.50" - 10
K0961981.50" - 28
K0417701.25" - 10
K0417721.50" - 10
K0417711.50" - 28
K0417681.50" - 10
K0417691.50" - 28
Camshaft Spline
(Diameter - Teeth)
Lube
Fitting
45°
Bulletin No: PNU-184 Effective Date: January 13, 2014 Cancels: NA Page: 4 of 4
NOTE: Bendix® Versajust® LS™ and Bendix® ASA-5® Slack Adjuster YOKES are NOT INTERCHANGEABLE
25/32"
A
Easy-On Yoke Adapter
Service A
New Push Rod
Part No. Thread Size
291452N 5/8"-18 UNF
292756N 1/2"-20 UNF
A
1-9/32"
Easy-On Extended
Yoke Adapter
Service A
New Push Rod
Part No. Thread Size
297700N 5/8"-18 UNF
297701N 1/2"-20 UNF
Quick Connect Yoke Adapters
1/2" Adapter Kit Part No. 107162
5/8" Adapter Kit Part No. 107161N
Reference Document:
The Service Data Sheet for the Bendix® Versajust® LS™ slack adjuster
with the WearMax™ Clutch is SD-05-4630. This document is available
for download from the Bendix Document Library at www.bendix.com,
or may be ordered from the Marketing Center.
For more information contact your Bendix Account Manager or Plant at
1-800-AIR-BRAKE (1-800-247-2725).
Log-on and Learn from the Best
On-line training that's available when you are 24/7/365.