Part Number Update
Bulletin No: PNU-097-000-A Effective Date: 5/01/04 Cancels: NA Page: 1 of 6
Subject:
All current A-18 wiring harness part numbers will be obsoleted and replaced by this change. (See attached )
Bendix A-18 Trailer ABS Wiring Harness Part Num ber Update
Page 1of 6
Basic A-18 Wiring Harness
If you used this Part Number Now order this Part Number
ECU
Pigtail
A-18B Cable Basic - Pwr (40in), Sns (106in), BC (18in) 300263 5013332 Cable Basic - Pwr (60in), Sns (60in), Mod (17in), BC (7in)
A-18B Cable Basic - Pwr (117in), Sns (106in), BC (18in) 300264 5013333 Cable Basic - Pwr (180in), Sns (60in), Mod (17in), BC (7in)
A-18B Cable Basic - Pwr (181in), Sns (106in), BC (18in) 300262 5013333 Cable Basic - Pwr (180in), Sns (60in), Mod (17in), BC (7in)
A-18B Cable Basic - Pwr (236in), Sns (106in), BC (18in) 300265 5013334 Cable Basic - Pwr (234in), Sns (60in), Mod (17in), BC (7in)
A-18B Cable Basic - Pwr (293in), Sns (106in), BC (18in) 300298 n/a n/a
Since the integral wheel speed sensor leads have been standardized at 60”, you may need to order part number 300257 (Sensor Extension) for each
sensor lead. Most applications will accept the 60” leads without additional cables.
Description Old
Harness PN
n/a n/a 5013331 Cable Basic - Pwr (9in), Sns (60in), Mod (17in), BC (7in)
New
Harness PN
Description
Sensor E xt ension Ha rness
Page 2of 6
Ne w A -18 B as ic Har nes s
Sens or le ads re duc e d
to 60” from 106 ”.
Ne w Blink Cod e
lead with cap
Standard A-18 (X1) Wiring Harness
Single Modulator
The Standard A-18 Unit requires an X1 and X2 harness.
If you used this Part Number Now order this Part Number
ECU Pigtail Description Old HarnessPNNew Harness
PN
A-18S n/a n/a 5013335 Cable X1 1M - Pwr (9in), MOD1 (17in)
A-18S Cable X1 - Pwr (40in), MOD1 (18in) 300232 5013336 Cable X1 1M - Pwr (60in), MOD1 (17in)
A-18S Cable X1 - Pwr (117in), MOD1 (18in) 300244 5013337 Cable X1 1M - Pwr (180in), MOD1 (17in)
A-18S Cable X1 - Pwr (181in), MOD1 (18in) 300220 5013337 Cable X1 1M - Pwr (180in), MOD1 (17in)
A-18S Cable X1 - Pwr (236in), MOD1 (18in) 300245 5013338 Cable X1 1M - Pwr (234in), MOD1 (17in)
A-18S Cable X1 - Pwr (293in), MOD1 (18in) 300297 n/a n/a
There are no significant changes to this set of part numbers.
New A -18 S tand ard (X1) Harnes s (S i ngl e M odul ator)
Description
Page 3of 6
Standard A-18 (X1) Wiring Harness
Dual Modulator
The Standard A-18 Unit requires an X1 and X2 harness.
If you used this Part Number Now order this Part Number
ECU Pigtail Description Old HarnessPNNew Harness
PN
A-18S n/a n/a 5013339 Cable X1 2M - Pwr (9in), MOD1 (17in), MOD2 (36in)
A-18S Cable X1 - Pwr (40in), MOD1 (18in), MOD2 (38in) 300231 5013340 Cable X1 2M - Pwr (60in), MOD1 (17in), MOD2 (36in)
A-18S Cable X1 - Pwr (117in), MOD1 (18in), MOD2 (38in) 300246 5013341 Cable X1 2M - Pwr (180in), MOD1 (17in), MOD2 (36in)
A-18S Cable X1 - Pwr (181in), MOD1 (18in), MOD2 (38in) 300221 5013341 Cable X1 2M - Pwr (180in), MOD1 (17in), MOD2 (36in)
A-18S Cable X1 - Pwr (236in), MOD1 (18in), MOD2 (38in) 300247 5013342 Cable X1 2M - Pwr (234in), MOD1 (17in), MOD2 (36in)
A-18S Cable X1 - Pwr (40in), MOD1 (18in), MOD2 (467in) 300334 5013340 Cable X1 2M - Pwr (60in), MOD1 (17in), MOD2 (36in)
A-18S Cable X1 - Pwr (117in), MOD1 (18in), MOD2 (467in) 300333 5013341 Cable X1 2M - Pwr (180in), MOD1 (17in), MOD2 (36in)
A-18S Cable X1 - Pwr (181in), MOD1 (18in), MOD2 (467in) 300335 5013341 Cable X1 2M - Pwr (180in), MOD1 (17in), MOD2 (36in)
A-18S Cable X1 - Pwr (236in), MOD1 (18in), MOD2 (467in) 300332 5013342 Cable X1 2M - Pwr (234in), MOD1 (17in), MOD2 (36in)
A-18S Cable X1 - Pwr (40in), MOD1 (18in), MOD2 (250in) 300348 5013340 Cable X1 2M - Pwr (60in), MOD1 (17in), MOD2 (36in)
A-18S Cable X1 - Pwr (117in), MOD1 (18in), MOD2 (250in) 300347 5013341 Cable X1 2M - Pwr (180in), MOD1 (17in), MOD2 (36in)
A-18S Cable X1 - Pwr (181in), MOD1 (18in), MOD2 (250in) 300349 5013341 Cable X1 2M - Pwr (180in), MOD1 (17in), MOD2 (36in)
A-18S Cable X1 - Pwr (236in), MOD1 (18in), MOD2 (250in) 300346 5013342 Cable X1 2M - Pwr (234in), MOD1 (17in), MOD2 (36in)
Since the integral Modulator 2 lead has been standardized at 36”, you may need to order part number 5013345 (MOD Extension) to achie ve nee ded lengt hs
for wide spread 4S/2M Axle Control applications. Most 4S/2M Side Control applications will accept the 36” lead without additional cables.
Description
Page 4of 6
Modulat or E xt ension Ha rness
New A -18 S tandard (X1) Harness (D ual Modulat or)
Standard A-18 (X2) Wiring Harness
The Standard A-18 Unit requires an X1 and X2 harness.
If you used this Part Number Now order this Part Number
ECU
Pigtail
A-18S Cable X2 - 2S, Sns (72in), Blink Code (120in) 300233 5013346 Cable X2 - 2S, Sns A-B (60in), Diag (9in)
A-18S Cable X2 - 2S, Sns (72in), Blink Code (72in) 300282 5013346 Cable X2 - 2S, Sns A-B (60in), Diag (9in)
A-18S Cable X2 - 2S, Sns (96in), Blink Code (120in) 300255 5013346 Cable X2 - 2S, Sns A-B (60in), Diag (9in)
A-18S Cable X2 - 2S, Sns (72in), Diag (120in) 300218 5013346 Cable X2 - 2S, Sns A-B (60in), Diag (9in)
A-18S Cable X2 - 2S, Sns (96in), Diag (120in) 300254 5013346 Cable X2 - 2S, Sns A-B (60in), Diag (9in)
A-18S Cable X2 - 4S, Sns A-B (72in), Sns C-D (96in), Blink Code (120in) 5011721 5013347 Cable X2 - 4S, Sns A-B (60in), Sns C-D (60in), Diag (9in)
A-18S Cable X2 - 4S, Sns A-B (96in), Sns C-D (96in), Blink Code (120in) 5011722 5013347 Cable X2 - 4S, Sns A-B (60in), Sns C-D (60in), Diag (9in)
A-18S Cable X2 - 4S, Sns A-B (72in), Sns C-D (96in), Diag (120in) 300219 5013347 Cable X2 - 4S, Sns A-B (60in), Sns C-D (60in), Diag (9in)
A-18S Cable X2 - 4S, Sns A-B (96in), Sns C-D (96in), Diag (120in) 300256 5013347 Cable X2 - 4S, Sns A-B (60in), Sns C-D (60in), Diag (9in)
A-18S Cable X2 - 4S, Sns A-B (8in), Sns C-D (8in), Diag (120in) 300374 5013347 Cable X2 - 4S, Sns A-B (60in), Sns C-D (60in), Diag (9in)
Since the integral wheel speed sensor leads have been standardized at 60”, you may need to order part number 300257 (Sensor Extension) for each
sensor lead. Most applications will accept the 60” leads without additional cables.
Also, the J1587 diagnostic connector is now optional. All X2 cables come with a 4-pin connector with cap. Pin-2 (GND) and pin-3 (J1587+) of the 4-pin
connector can be shorted using a coin or other metallic device to activate blink codes. A remote diagnostic connector can also be added if requir ed.
Description Old
Harness
PN
New
Harness
PN
Description
Page 5of 6
New A-18 Standard (X2)
Harness (T wo Sensor)
New A -18 S t andard (X2)
Harness (Four S ensor)
Misc. A-18 Harnesses
If you used this Part Number Now order this Part Number
Power Harness Description Old HarnessPNNew Harness
PN
A-18 NA NA 5013352 5-pin Packard, (120in.), Warning Lamp (10in) Non-Terminated
A-18 5 pin Packard, (470in.), Warning Lamp 300225 5013353 5-pin Packard, (780in.), Warning Lamp (10in) Non-Terminated
A-18 5 pin Packard, (589in.), Warning Lamp 300226 5013353 5-pin Packard, (780in.), Warning Lamp (10in) Non-Terminated
A-18 5 pin Packard, (786in.), Warning Lamp 300227 5013353 5-pin Packard, (780in.), Warning Lamp (10in) Non-Terminated
Description
Remote Diagnostic
Harness
A-18B Blink code wire, single lead (96") 300281 5013354 Blink code wire, single lead w/Cap (120")
A-18S NA NA 5007833 J1708 / J1587 Cable w/Cap (120in)
A-18S NA NA 5009193 J1708 / J1587 Cable w/Cap (72in)
A-18S NA NA 5013359 J1708 / J1587 Bracket Kit - Steel
A-18S NA NA 5013360 J1708 / J1587 Bracket Kit - Aluminum
Speed Sensor Lead
Extensions
WS-24 DIN – (40 in.) 300257 300257 DIN – (40 in.)
WS-24 DIN – (80 in.) 300258 300258 DIN – (80 in.)
WS-24 DIN – (120 in.) 300259 300259 DIN – (120 in.)
WS-24 DIN – (160 in.) 300260 300260 DIN – (160 in.)
Power Harness
Description Part No. Part No. Description
Description Part No. Part No. Description
Remote Blink Code Wire (Basic)
Page 6of 6
Sensor Extension Harness
Remote Diagnostic Harness
(Standard)
Loading...