Benchmark Scientific Incu-Shaker 10L Operation Manual

Operations Manual

Items: H1010 and H1012 (-E)

Index:

I. General Information

II-1. Introduction
II-2. Installation
II-3. Specifications
II-4. Features

III-1, Operation
III-2. Platform Installation
III-3. Error Messages
III-4. Maintenance

IV-1. Service and Contact

I. General Information

NOTE : Before operating the Incu-Shaker 10L Shaking
Incubators, please take a few minutes to familiarize yourself
with the contents of this manual.

Thank you for purchasing the Incu-Shaker 10L Shaking
Incubator. This operations manual contains instructions for
the care of this Instrument. In order to use the instrument
properly, please read this manual carefully before operation.
Please keep it available for future use.

Prior to the initial operation:
Please check the Instrument and the accessories against the

packing list when you first open the shipping carton. If you
find there is damage, a discrepancy, or missing items, please
contact your supplier immediately.

II-1. Introduction

The Incu-Shaker 10L Shaking Incubator series is designed for

many applications used in general research laboratories. The

Microprocessor’s constant monitoring system ensures accurate

temperature and shaking speed. The beltless drive system

minimizes noise and vibration while increasing the life span of the

unit. Optional accessories are available for compatibility with a

wide variety of laboratory vessels, including flasks, tubes, dishes

and trays.

II-2. Installation

- Choose a location that is free from rapidly changing

temperature conditions (away from a heating or cooling

vent).

- To assure proper ventilation, allow a minimum of 2 inches (5

Cm) of the clearance between the rear and side of the unit

and the adjacent wall.

- Always ensure that the machine is installed on a level surface.

- Before plugging the machine into the outlet, ensure that the

electrical specifications (listed on the serial number label on

the rear side of the unit) matches the electrical specifications

of your outlet.

- Always

- Avoid a direct ray and light.

- Avoid high humidity and dust air.

- Avoid cool areas (below 5).