Bematech S303D Programming Manual

Advanced Handheld High-Speed Laser Scanner
1
2D Imaging
Barcode Scanner
S303D
S303D 2D Imaging Barcode Scanner
i
PROGRAMMING GUIDE
Important Notice
No warranty of any kind is made in regard to this material, including, but not limited to, implied warranties of merchantability or fitness for any particular purpose. We are not liable for any errors contained herein nor for incidental or consequential damages in connection with furnishing, performance or use of this material. We shall be under no liability in respect of any defect arising from fair wear and tear, willful damage, negligence, abnormal working conditions, failure to follow the instructions and warnings, or misuse or alteration or repair of the products without written approval. No part of this document may be reproduced, transmitted, stored in a retrieval system, transcribed, or translated into any human or computer or other language in any form or by any means electronic, mechanical, magnetic, optical, chemical, biological, manual or otherwise, except for brief passages which may be quoted for purposes of scholastic or literary review, without express written consent and authorization. We reserve the right to make changes in product design without reservation and without notification. The material in this guide is for information only and is subject to change without notice. All trademarks mentioned herein, registered or otherwise, are the properties of their various, ill, assorted owners.
General Handling Precautions
Do not dispose the scanner in fire. Do not put the scanner directly in the sun or by any heat source. Do not use or store the scanner in a very humid place. Do not drop the scanner or allow it to collide violently with other objects. Do not take the scanner apart without authorization
Guidance for Printing
This manual is in A5 size. Please double check your printer setting before printing it out. When the barcodes are to be printed out for programming, the use of a high-resolution laser printer is strongly suggested for the best scan result.
Firmware Notice
To use all functions in this guide please update to the latest firmware.
Copyright © 2017. All rights reserved.
Advanced 2D Image Scanner
ii
PROGRAMMING GUIDE
Table of Contents
Important Notice ................................................................................... i
General Handling Precautions ............................................................................................ i
Guidance for Printing.......................................................................................................... i
Firmware Notice ................................................................................................................. i
Using the Scanner ................................................................................. 1
LED Indication .................................................................................................................... 1
Beeper Indication .............................................................................................................. 1
Settings and Programming .................................................................... 2
Programming operation steps ........................................................................................... 2
User Preferences ..................................................................................................... 3
Show Version ..................................................................................................................... 3
System Settings.................................................................................................................. 3
Customer's Factory Default ............................................................................................... 4
Scan Mode ......................................................................................................................... 5
Standby Time for Continue Scan Mode ............................................................................. 6
Same Code Delay Time for Continue Scan Mode .............................................................. 8
Interface Switch ................................................................................................................. 9
Good Read Beep Length .................................................................................................. 10
Good Read Beep Frequency ............................................................................................ 11
Aiming Pattern ................................................................................................................. 12
Illumination ..................................................................................................................... 13
Terminal Character .......................................................................................................... 14
RS232 Baud Rate ............................................................................................................. 15
USB Speed ....................................................................................................................... 17
Country Code ................................................................................................................... 18
Readable Symbologies .......................................................................................... 23
All Symbologies................................................................................................................ 23
UPC-A .............................................................................................................................. 24
UPC-E ............................................................................................................................... 25
EAN-8 ............................................................................................................................... 26
EAN 13 ............................................................................................................................. 27
Code 128 ......................................................................................................................... 28
Code 39 ........................................................................................................................... 29
Code 93 ........................................................................................................................... 30
Code 32 ........................................................................................................................... 31
Code 11 ........................................................................................................................... 32
Codabar ........................................................................................................................... 33
Plessey ............................................................................................................................. 34
MSI/Plessey ..................................................................................................................... 35
Interleaved 2 of 5 ............................................................................................................. 36
S303D 2D Imaging Barcode Scanner
iii
PROGRAMMING GUIDE
IATA 2 of 5 ........................................................................................................................ 37
Matrix 2 of 5 .................................................................................................................... 38
Straight 2 of 5 .................................................................................................................. 39
RSS 14 .............................................................................................................................. 40
RSS Expanded .................................................................................................................. 41
RSS Limited ...................................................................................................................... 42
Component CC-A ............................................................................................................. 43
Component CC-B ............................................................................................................. 44
Component CC-C ............................................................................................................. 45
PDF417 ............................................................................................................................ 46
Data Matrix ...................................................................................................................... 48
QR Code ........................................................................................................................... 49
Micro QR Code ................................................................................................................ 50
Aztec ................................................................................................................................ 51
MaxiCode......................................................................................................................... 52
Symbology Features .............................................................................................. 53
UPC / EAN ........................................................................................................................ 53
UPC-A .............................................................................................................................. 54
UPC-E ............................................................................................................................... 56
EAN 8 ............................................................................................................................... 58
EAN 13 ............................................................................................................................. 59
Code 39 ........................................................................................................................... 61
Codabar ........................................................................................................................... 63
Interleaved 2 of 5 ............................................................................................................. 65
MSI / Plessey ................................................................................................................... 67
Code 11 ........................................................................................................................... 69
Data Matrix ...................................................................................................................... 71
QR / Micro QR ................................................................................................................. 73
Aztec ................................................................................................................................ 75
Data Editing (Prefix) .............................................................................................. 76
Prefix Set Up Flow ............................................................................................................ 76
All Prefix .......................................................................................................................... 77
UPC / EAN Prefix .............................................................................................................. 78
Code 128 Prefix ............................................................................................................... 80
Code 39 Prefix ................................................................................................................. 81
Code 93 Prefix ................................................................................................................. 82
Code 32 Prefix ................................................................................................................. 83
Code 11 Prefix ................................................................................................................. 84
Codabar Prefix ................................................................................................................. 85
Plessey Prefix ................................................................................................................... 86
MSI Prefix ........................................................................................................................ 87
Interleaved 2 of 5 Prefix ................................................................................................... 88
IATA 2 of 5 Prefix .............................................................................................................. 89
Matrix 2 of 5 Prefix .......................................................................................................... 90
Straight 2 of 5 Prefix ........................................................................................................ 91
Advanced 2D Image Scanner
iv
PROGRAMMING GUIDE
RSS 14 Prefix .................................................................................................................... 92
RSS Expanded Prefix ........................................................................................................ 93
RSS Limited Prefix ............................................................................................................ 94
Component CC-A Prefix ................................................................................................... 95
Component CC-B Prefix ................................................................................................... 96
Component CC-C Prefix ................................................................................................... 97
PDF 417 Prefix ................................................................................................................. 98
Micro PDF 417 Prefix ....................................................................................................... 99
Data Matrix Prefix .......................................................................................................... 100
QR Prefix ........................................................................................................................ 101
Micro QR Prefix.............................................................................................................. 102
Aztec Prefix .................................................................................................................... 103
MaxiCode Prefix ............................................................................................................ 104
Data Editing (Suffix) ............................................................................................ 105
Suffix Set Up Flow .......................................................................................................... 105
All Suffix ......................................................................................................................... 106
UPC-A Suffix ................................................................................................................... 107
UPC-E Suffix ................................................................................................................... 108
EAN 8 Suffix ................................................................................................................... 109
EAN 13 Suffix ................................................................................................................. 110
Code 128 Suffix .............................................................................................................. 111
Code 39 Suffix ................................................................................................................ 112
Code 93 Suffix ................................................................................................................ 113
Code 32 Suffix ................................................................................................................ 114
Code 11 Suffix ................................................................................................................ 115
Codabar Suffix ............................................................................................................... 116
Plessey Suffix ................................................................................................................. 117
MSI Suffix ....................................................................................................................... 118
Interleaved 2 of 5 Suffix ................................................................................................. 119
IATA 2 of 5 Suffix ............................................................................................................ 120
Matrix 2 of 5 Suffix ........................................................................................................ 121
Straight 2 of 5 Suffix ...................................................................................................... 122
RSS 14 Suffix .................................................................................................................. 123
RSS Expanded Suffix....................................................................................................... 124
RSS Limited Suffix .......................................................................................................... 125
Component CC-A Suffix ................................................................................................. 126
Component CC-B Suffix ................................................................................................. 127
Component CC-C Suffix.................................................................................................. 128
PDF-417 Suffix ............................................................................................................... 129
Micro PDF-417 Suffix ..................................................................................................... 130
Data Matrix Suffix .......................................................................................................... 131
QR Code Suffix ............................................................................................................... 132
Micro QR Suffix .............................................................................................................. 133
Aztec Suffix .................................................................................................................... 134
MaxiCode Suffix ............................................................................................................. 135
S303D 2D Imaging Barcode Scanner
v
PROGRAMMING GUIDE
Code Settings ...................................................................................................... 136
Set Lengths for Codes .................................................................................................... 136
Set Lengths for Code 128 ............................................................................................... 138
Set Lengths for Code 39 ................................................................................................. 139
Set Lengths for Code 93 ................................................................................................. 140
Set Lengths for Codabar ................................................................................................ 141
Set Lengths for Interleaved 2 of 5 .................................................................................. 142
Set Lengths for Code 11 ................................................................................................. 143
Set Lengths for MSI ........................................................................................................ 144
Set Lengths for Matrix 2 of 5 ......................................................................................... 145
Code Identifiers ............................................................................................................. 146
Code Identifiers Table .................................................................................................... 147
Keyboard Caps Lock State .............................................................................................. 148
Function Key Mapping ................................................................................................... 149
ASCII Code ..................................................................................................................... 150
Advanced Programming .................................................................... 171
S303D 2D Imaging Barcode Scanner
1
PROGRAMMING GUIDE
Using the Scanner
LED Indication
LED Status
Indication
1 red flash
A barcode has been successfully decoded
Steady blue
Scanner in work mode
Beeper Indication
Beeps
Indication
3 beeps in a series from low to high pitch
Power up
1 short beep
A barcode has been successfully decoded
2 short beeps
The scanner has entered program mode
1 long beep
A setting has been programmed
3 beeps in a series from low to high pitch
The scanner has exited program mode
3 short beeps
Error setting the scanner
Advanced 2D Image Scanner
2
PROGRAMMING GUIDE
Settings and Programming
Scan selected barcodes in this manual to affect setup and programming of the handheld imaging barcode scanner. Decoding options and interface protocols can be tailored to a specific application.
Setup parameters are stored in non-volatile memory in the scanner and are retained even when power is off. Setup parameters change only when you reset them. You may need to hide adjacent code patches with your hand when scanning.
Programming operation steps
To program each scanner parameter, scan the setup barcodes in the following sequence.
1. Scan "Set" barcode to initiate set up.
2. Scan selected barcode.
3. Scan "End" barcode to confirm the setup.
S303D 2D Imaging Barcode Scanner
3
PROGRAMMING GUIDE
User Preferences
Show Version
Scan this barcode to display firmware version.
Read device information
System Settings
Scan this barcode to return all parameters to the default values.
Set
Factory default settings
End
Advanced 2D Image Scanner
4
PROGRAMMING GUIDE
Customer's Factory Default
Scan barcodes below to set or delete customer’s factory default.
Set
Save customer's factory default
Delete customer's factory default
End
S303D 2D Imaging Barcode Scanner
5
PROGRAMMING GUIDE
Scan Mode
Scan a barcodes below to set the scanner to different modes. Trigger Mode: The scanner becomes inactive as soon as the data is transmitted by pressing the trigger button. Presentation Mode: Also called auto trigger mode. The scanner is inactive but will automatically detect barcodes presented in the scan zone and become active. Continue Scan Mode: scans periodically non-stop (ex. Scans once a second).
Set
Trigger Mode (default)
Presentation Mode
Continue Scan Mode
End
Advanced 2D Image Scanner
6
PROGRAMMING GUIDE
Standby Time for Continue Scan Mode
Use the barcodes below to set the standby time for Continue Scan Mode.
Set
5 minutes (Default)
10 minutes
15 minutes
End
S303D 2D Imaging Barcode Scanner
7
PROGRAMMING GUIDE
Set
20 minutes
25 minutes
30 minutes
Never
End
Advanced 2D Image Scanner
8
PROGRAMMING GUIDE
Same Code Delay Time for Continue Scan Mode
Scan a barcode below to select the duration of the delay time for Continue Scan Mode.
Set
500 msec (Default)
1 sec
1.5 sec
2 sec
End
S303D 2D Imaging Barcode Scanner
9
PROGRAMMING GUIDE
Interface Switch
Your 2D Imager supports interfaces USB HID and USB virtual COM. To switch the interface, simply select the appropriate cable and configure the proper interface by following interface selection.
Set
USB Keyboard (Default)
USB Virtual COM Port
*Driver required
End
Advanced 2D Image Scanner
10
PROGRAMMING GUIDE
Good Read Beep Length
Scan a barcode below to select the duration of the beep signal after a good decode.
Set
50 msec (Default)
100 msec
150 msec
200 msec
End
S303D 2D Imaging Barcode Scanner
11
PROGRAMMING GUIDE
Good Read Beep Frequency
Scan a barcode below to select the beep tone of the beep signal after a good decode.
Set
Low
Medium (Default)
High
End
Advanced 2D Image Scanner
12
PROGRAMMING GUIDE
Aiming Pattern
Aiming pattern works as an aiming system to aid in barcode reading. Use the following settings to enable or disable this function. This function is for supporting models only.
Set
Auto (Default)
Always On
Always Off
End
S303D 2D Imaging Barcode Scanner
13
PROGRAMMING GUIDE
Illumination
Set Illumination to aid in barcode reading. Use the following settings to configure this function.
Set
On (Default)
Always On
Off
End
Advanced 2D Image Scanner
14
PROGRAMMING GUIDE
Terminal Character
Set
None
CR/LF (Default)
CR
TAB
End
S303D 2D Imaging Barcode Scanner
15
PROGRAMMING GUIDE
RS232 Baud Rate
Baud rate is the number of bits of data transmitted per second. Set the imager's baud rate to match the baud rate setting of the host device. Otherwise, data may not reach the host device or may reach it in distorted form.
Set
9600
19200
38400
57600
End
Advanced 2D Image Scanner
16
PROGRAMMING GUIDE
Set
115200 (Default)
End
S303D 2D Imaging Barcode Scanner
17
PROGRAMMING GUIDE
USB Speed
Scan a barcode below to set USB speed.
Set
USB 2.0 (Default)
USB 1.1
End
Advanced 2D Image Scanner
18
PROGRAMMING GUIDE
Country Code
Scann the following settings to change the country code.
Set
US (Default)
Belgium
Britain
Denmark
End
S303D 2D Imaging Barcode Scanner
19
PROGRAMMING GUIDE
Set
France
Germany
Italy
Norway
End
Advanced 2D Image Scanner
20
PROGRAMMING GUIDE
Set
Portugal
Spain
Sweden
Switzerland
End
S303D 2D Imaging Barcode Scanner
21
PROGRAMMING GUIDE
Set
Japan
Hungary
Czech Republic
Slovakia
End
Advanced 2D Image Scanner
22
PROGRAMMING GUIDE
Set
Romania
Croatia
Poland
End
S303D 2D Imaging Barcode Scanner
23
PROGRAMMING GUIDE
Readable Symbologies
This section provides the programming barcodes for enabling and disabling readable symbologies. If the default values suit requirements, programming is not necessary.
All Symbologies
Set
Enable All
Default
End
Advanced 2D Image Scanner
24
PROGRAMMING GUIDE
UPC-A
Set
Enable UPC-A (Default)
Disable UPC-A
End
S303D 2D Imaging Barcode Scanner
25
PROGRAMMING GUIDE
UPC-E
Set
Enable UPC-E (Default)
Disable UPC-E
End
Advanced 2D Image Scanner
26
PROGRAMMING GUIDE
EAN-8
Set
Enable EAN 8 (Default)
Disable EAN 8
End
S303D 2D Imaging Barcode Scanner
27
PROGRAMMING GUIDE
EAN 13
Set
Enable EAN 13 (Default)
Disable EAN 13
End
Advanced 2D Image Scanner
28
PROGRAMMING GUIDE
Code 128
Set
Enable Code 128 (Default)
Disable Code 128
End
S303D 2D Imaging Barcode Scanner
29
PROGRAMMING GUIDE
Code 39
Set
Enable Code 39 (Default)
Disable Code 39
End
Advanced 2D Image Scanner
30
PROGRAMMING GUIDE
Code 93
Set
Enable Code 93 (Default)
Disable Code 93
End
S303D 2D Imaging Barcode Scanner
31
PROGRAMMING GUIDE
Code 32
Set
Enable Code 32
Disable Code 32 (Default)
End
Advanced 2D Image Scanner
32
PROGRAMMING GUIDE
Code 11
Set
Enable Code 11
Disable Code 11 (Default)
End
S303D 2D Imaging Barcode Scanner
33
PROGRAMMING GUIDE
Codabar
Set
Enable Codabar (Default)
Disable Codabar
End
Advanced 2D Image Scanner
34
PROGRAMMING GUIDE
Plessey
Set
Enable Plessey
Disable Plessey (Default)
End
S303D 2D Imaging Barcode Scanner
35
PROGRAMMING GUIDE
MSI/Plessey
Set
Enable MSI/Plessey
Disable MSI/Plessey (Default)
End
Advanced 2D Image Scanner
36
PROGRAMMING GUIDE
Interleaved 2 of 5
Set
Enable Interleaved 2 of 5 (Default)
Disable Interleaved 2 of 5
End
S303D 2D Imaging Barcode Scanner
37
PROGRAMMING GUIDE
IATA 2 of 5
Set
Enable IATA 2 of 5
Disable IATA 2 of 5 (Default)
End
Advanced 2D Image Scanner
38
PROGRAMMING GUIDE
Matrix 2 of 5
Set
Enable Matrix 2 of 5
Disable Matrix 2 of 5 (Default)
End
S303D 2D Imaging Barcode Scanner
39
PROGRAMMING GUIDE
Straight 2 of 5
Set
Enable Straight 2 of 5
Disable Straight 2 of 5 (Default)
End
Advanced 2D Image Scanner
40
PROGRAMMING GUIDE
RSS 14
Set
Enable RSS 14 (Default)
Disable RSS 14
End
S303D 2D Imaging Barcode Scanner
41
PROGRAMMING GUIDE
RSS Expanded
Set
Enable RSS Expanded (Default)
Disable RSS Expanded
End
Advanced 2D Image Scanner
42
PROGRAMMING GUIDE
RSS Limited
Set
Enable RSS Limited (Default)
Disable RSS Limited
End
S303D 2D Imaging Barcode Scanner
43
PROGRAMMING GUIDE
Component CC-A
Set
Enable Component CC-A
Disable Component CC-A (Default)
End
Advanced 2D Image Scanner
44
PROGRAMMING GUIDE
Component CC-B
Set
Enable Component CC-B
Disable Component CC-B (Default)
End
S303D 2D Imaging Barcode Scanner
45
PROGRAMMING GUIDE
Component CC-C
Set
Enable Component CC-C
Disable Component CC-C (Default)
End
Advanced 2D Image Scanner
46
PROGRAMMING GUIDE
PDF417
Set
Enable PDF417 (Default)
Disable PDF417
End
S303D 2D Imaging Barcode Scanner
47
PROGRAMMING GUIDE
Micro PDF417
Set
Enable Micro PDF417 (Default)
Disable Micro PDF417
End
Advanced 2D Image Scanner
48
PROGRAMMING GUIDE
Data Matrix
Set
Enable Data Matrix (Default)
Disable Data Matrix
End
S303D 2D Imaging Barcode Scanner
49
PROGRAMMING GUIDE
QR Code
Set
Enable QR Code (Default)
Disable QR Code
End
Advanced 2D Image Scanner
50
PROGRAMMING GUIDE
Micro QR Code
Set
Enable Micro QR Code (Default)
Disable Micro QR Code
End
S303D 2D Imaging Barcode Scanner
51
PROGRAMMING GUIDE
Aztec
Set
Enable Aztec
Disable Aztec (Default)
End
Advanced 2D Image Scanner
52
PROGRAMMING GUIDE
MaxiCode
Set
Enable MaxiCode
Disable MaxiCode (Default)
End
S303D 2D Imaging Barcode Scanner
53
PROGRAMMING GUIDE
Symbology Features
This section provides the programming barcodes for selecting features available to different symbologies.
UPC / EAN
Set
Enable decoding of 2/5-digit supplemental
code for UPC-A, UPC-E, EAN-13,
and EAN-8
Disable decoding of 2/5-digit supplemental
code for UPC-A, UPC-E, EAN-13,
and EAN-8 (Default)
End
Advanced 2D Image Scanner
54
PROGRAMMING GUIDE
UPC-A
Set
Enable UPC-A Number System digit
(Default)
Disable UPC-A Number System digit
Enable UPC-A check digit (Default)
Disable UPC-A check digit
End
S303D 2D Imaging Barcode Scanner
55
PROGRAMMING GUIDE
Set
Enable conversion of UPC-A to EAN13
Disable conversion of UPC-A to EAN13
(Default)
End
Advanced 2D Image Scanner
56
PROGRAMMING GUIDE
UPC-E
Set
Enable UPC-E Number System digit
(Default)
Disable UPC-E Number System digit
Enable UPC-E check digit (Default)
Disable UPC-E check digit
End
S303D 2D Imaging Barcode Scanner
57
PROGRAMMING GUIDE
Set
Enable conversion of UPC-E to UPC-A
Disable conversion of UPC-E to UPC-A
(Default)
End
Advanced 2D Image Scanner
58
PROGRAMMING GUIDE
EAN 8
Set
Enable EAN 8 check digit (Default)
Disable EAN 8 check digit
Enable conversion of EAN 8 to EAN 13
Disable conversion of EAN 8 to EAN 13
(Default)
End
S303D 2D Imaging Barcode Scanner
59
PROGRAMMING GUIDE
EAN 13
Set
Enable EAN 13 check digit (Default)
Disable EAN 13 check digit
Enable conversion of EAN 13 to ISBN
Disable conversion of EAN 13 to ISBN
(Default)
End
Advanced 2D Image Scanner
60
PROGRAMMING GUIDE
Set
Enable conversion of EAN 13 to ISSN
Disable conversion of EAN 13 to ISSN
(Default)
End
S303D 2D Imaging Barcode Scanner
61
PROGRAMMING GUIDE
Code 39
Set
Enable Code 39 full ASCII mode
Disable Code 39 full ASCII mode (Default)
Enable Start and Stop characters
Disable Start and Stop characters (Default)
End
Advanced 2D Image Scanner
62
PROGRAMMING GUIDE
Set
Disable Checksum (Default)
Enable checksum and send check
character
Enable checksum and strip check
character
End
S303D 2D Imaging Barcode Scanner
63
PROGRAMMING GUIDE
Codabar
Set
Disable Checksum (Default)
Enable checksum and send check
character
Enable checksum and strip check
character
End
Advanced 2D Image Scanner
64
PROGRAMMING GUIDE
Set
Enable stripping Start and Stop characters
Disable stripping Start and Stop characters
(Default)
End
S303D 2D Imaging Barcode Scanner
65
PROGRAMMING GUIDE
Interleaved 2 of 5
Set
Disable Checksum (Default)
Enable checksum and send check
character
Enable checksum and strip check
character
End
Advanced 2D Image Scanner
66
PROGRAMMING GUIDE
Set
Default quiet zone checking
No length checking performed (Default)
Smaller quiet zone allowed
End
S303D 2D Imaging Barcode Scanner
67
PROGRAMMING GUIDE
MSI / Plessey
Set
Disable MSI Plessey checksum
Mod 10 checksum (Default)
Mod 10/10 checksum
Mod 11/10 checksum
End
Advanced 2D Image Scanner
68
PROGRAMMING GUIDE
Set
Output checksum character(s) (Default)
Strip checksum character(s)
End
S303D 2D Imaging Barcode Scanner
69
PROGRAMMING GUIDE
Code 11
Set
Output checksum character(s)
Strip checksum character(s) (Default)
End
Advanced 2D Image Scanner
70
PROGRAMMING GUIDE
Set
Disable checksum checking
Enable 1-digit checksum checking
Enable 2-digit checksum checking
(Default)
End
S303D 2D Imaging Barcode Scanner
71
PROGRAMMING GUIDE
Data Matrix
Set
Enable mirror decoding (Default)
Disable mirror decoding
End
Advanced 2D Image Scanner
72
PROGRAMMING GUIDE
Set
Enable rectangular Data Matrix decoding
Disable rectangular Data Matrix decoding
(Default)
End
S303D 2D Imaging Barcode Scanner
73
PROGRAMMING GUIDE
QR / Micro QR
Set
Enable mirror decoding (Default)
Disable mirror decoding
End
Advanced 2D Image Scanner
74
PROGRAMMING GUIDE
Set
UTF8 conversion for word only
Universal UTF8 conversion (Default)
End
Note: Please install QR_UTF8_Conversion executable file before using this function.
S303D 2D Imaging Barcode Scanner
75
PROGRAMMING GUIDE
Aztec
Set
Enable mirror decoding (Default)
Disable mirror decoding
End
Advanced 2D Image Scanner
76
PROGRAMMING GUIDE
Data Editing (Prefix)
Prefix is additional characters that can be sent before the scanned data. Please scan the barcodes in the selection below to set your prefix.
Prefix Set Up Flow
1. Scan Set.
2. Enable barcode type.
3. Scan prefix you would like to add characters within ASCII Table. Up to 4 digits can
be added. Characters A to Z can be output as Ctrl-A to Ctrl-Z s if "Function Key Mapping" is enabled.
4. Scan End.
Ex. If we wish to add 3 as prefix for all barcode type, then follow procedure as below, Scan [Set] to enter setup. Then we select barcode by scanning [Enable All], then we scan [3] as 3 of ASCII HEX. At the end, we scan [End] to completed setup.
S303D 2D Imaging Barcode Scanner
77
PROGRAMMING GUIDE
All Prefix
Enable/disable prefix for all barcodes.
Set
Enable All
Disable All (Default)
End
Advanced 2D Image Scanner
78
PROGRAMMING GUIDE
UPC / EAN Prefix
Set
Enable UPC-A
Disable UPC-A
Enable UPC-E
Disable UPC-E
End
S303D 2D Imaging Barcode Scanner
79
PROGRAMMING GUIDE
Set
Enable EAN 8
Disable EAN 8
Enable EAN 13
Disable EAN 13
End
Advanced 2D Image Scanner
80
PROGRAMMING GUIDE
Code 128 Prefix
Set
Enable Code 128
Disable Code 128
End
S303D 2D Imaging Barcode Scanner
81
PROGRAMMING GUIDE
Code 39 Prefix
Set
Enable Code 39
Disable Code 39
End
Advanced 2D Image Scanner
82
PROGRAMMING GUIDE
Code 93 Prefix
Set
Enable Code 93
Disable Code 93
End
S303D 2D Imaging Barcode Scanner
83
PROGRAMMING GUIDE
Code 32 Prefix
Set
Enable Code 32
Disable Code 32
End
Advanced 2D Image Scanner
84
PROGRAMMING GUIDE
Code 11 Prefix
Set
Enable Code 11
Disable Code 11
End
S303D 2D Imaging Barcode Scanner
85
PROGRAMMING GUIDE
Codabar Prefix
Set
Enable Codabar
Disable Codabar
End
Advanced 2D Image Scanner
86
PROGRAMMING GUIDE
Plessey Prefix
Set
Enable Plessey
Disable Plessey
End
S303D 2D Imaging Barcode Scanner
87
PROGRAMMING GUIDE
MSI Prefix
Set
Enable MSI
Disable MSI
End
Advanced 2D Image Scanner
88
PROGRAMMING GUIDE
Interleaved 2 of 5 Prefix
Set
Enable Interleaved 2 of 5
Disable Interleaved 2 of 5
End
S303D 2D Imaging Barcode Scanner
89
PROGRAMMING GUIDE
IATA 2 of 5 Prefix
Set
Enable IATA 2 of 5
Disable IATA 2 of 5
End
Advanced 2D Image Scanner
90
PROGRAMMING GUIDE
Matrix 2 of 5 Prefix
Set
Enable Matrix 2 of 5
Disable Matrix 2 of 5
End
S303D 2D Imaging Barcode Scanner
91
PROGRAMMING GUIDE
Straight 2 of 5 Prefix
Set
Enable Straight 2 of 5
Disable Straight 2 of 5
End
Advanced 2D Image Scanner
92
PROGRAMMING GUIDE
RSS 14 Prefix
Set
Enable RSS 14
Disable RSS 14
End
Loading...