Beltronics Laser Pro 904 Owner's Manual
LASER DEFENSE SYSTEM
Operating Manual
For LaserPro
Model LP904
Ultimate Performance. Proven Technology.
™
904
TM
Congratulations and Important Notice
Congratulations on your
purchase of BEL LaserPro™904.
BEL LaserPro™904
is designed as the ultimate in
traffic Laser defense given that it
produces countermeasures
beyond the function of
traditional Laser detectors by
blocking the Laser beam that is
targeted at your vehicle.
LaserPro
™
904 is comprised
of sophisticated, exterior
mounted front and rear Laser
transceivers. You can operate
™
LaserPro
904 as a stand-alone
unit, and know you’re protected
beyond traditional “Laser
detectors”, or you can
supplement LaserPro
™
904’s
capabilities with a dash or
Remote Installation
Radar/Laser/Safety detector
from BELTRONICS.
Please Note:
Operating BEL LaserPro™904 is
not a license to speed. Observe
the local speed limits and laws
governing the user of a Laser
defense product. Use of
™
LaserPro
904 is prohibited in
some states. Check your local
and state laws before use or call
BELTRONICS:800-939-7373.
The Three transceivers of
™
LaserPro
904 must have a
clear view of the road in front
and behind, and must be
installed level to the road in
order to work properly. Ensure
your BEL LaserPro
™
904 is
correctly positioned after it is
installed.
IMPORTANT Notice
It is recommended that
™
LaserPro
904 be professionally
installed. New car dealers, and
many reputable auto shops or
car stereo stores should be able
to install LaserPro
™
904. Call
BEL toll-free at 800-737-9393,
for the name of an authorized
dealer near you.
Installing LaserPro
™
904 without
expertise in automotive
electronic installations could
cause personal injury, or damage
to the unit or your vehicle. If
your vehicle is damaged during
installation, its safety systems
may be compromised, which
could cause personal injury or
property damage.
2
Table of Contents
Quick Overview of Functions and LED Display . . . . . . . 4
Button Functions/Explanation of LEDs
Power/Volume Button . . . . . . . . . . . . . . . . . . . . 5
Bright/Dim/Dark Modes . . . . . . . . . . . . . . . . . . . . 5
Disarm Button . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Explanation of LEDs . . . . . . . . . . . . . . . . . . . . . . 5
Power On Indicator . . . . . . . . . . . . . . . . . . . . . . . 5
Front/Rear Laser Alert Indicators . . . . . . . . . . . . . . . . . . 5
General Operation/Disarm Function . . . . . . . . . . . . . 6
How Traffic Laser (LIDAR) Operates . . . . . . . . . . . . . 7
Alert and Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Tr oubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 10
Questions and Answers . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Consumer Warranty . . . . . . . . . . . . . . . . . . . . . . . 12
Warranty Service . . . . . . . . . . . . . . . . . . . . . . . . . 13
Post Warranty Service . . . . . . . . . . . . . . . . . . . . . 14
3
Quick Overview of Functions and LED Display
8. Green Power On LED: Illuminates to
confirm LaserPro™ 904 is operational.
4. Red “F” LED: illuminates to
confirm a Laser alert from the
front.
1. P/V Button: Power and
Volume button.
7. Audio Speaker: All audio alerts are
emitted from this opening.
6. Three Blue LEDs: illuminate in
conjunction with the “F” or “R” LED to
confirm a Laser alert.
5. Red “R” LED: illuminates
to confirm a Laser alert from
the rear.
3. DIS Button: Press during a Laser
encounter to stop LaserPro™ 904
from continuously blocking the
return of the Laser signal once
an alert is received.
2. DRK Button: Press once to “dim”
the ALERT LED display; press a second
time to cancel illumination of the
ALERT LED display. The GREEN Power
On LED will illuminate in “dim” mode
to confirm LaserPro™ 904 is
operational. Factory default is full
brightness.
4
Button Functions/Explanation of LEDs
Button Functions
1. P/V Button: Press
once to activate power to
LaserPro™904*. Press and
hold to cycle the volume
control.
*
Depending upon the type of
installation, LaserPro™904 may
be powered ON when your
vehicle ignition is ON; and
turned off, when your vehicle
ignition is OFF
2. DRK (Dark) Button: Press
once to “dim” the LED display.
Press again to completely cancel
illumination of the ALERT
display. In “dark” mode, power
to the unit is confirmed by the
“dim” illumination of the GREEN
Power On LED.
3. DIS – Disarm Button: Once
a Laser alert is displayed via the
red and blue ALERT LEDs,
whether from the front or rear,
press the DIS button to disarm
LaserPro
“blocking” traffic Laser signals.
BELTRONICS recommends that
the DIS button be pressed
within five seconds of a Laser
.
™
904 from further
alert. Five seconds provides you
enough time to adjust your
vehicle speed and avoid any
undue attention you may draw
to yourself and your vehicle.
If you choose, you can rearm
™
LaserPro
904 by pressing
the DIS button a second time
(see page 6).
Explanation of LEDs
1.Power On Indicator:
illuminates GREEN to confirm
LaserPro™904 has power and is
operational. This same LED
illuminates in “dim” mode when
you have activated either the
“dim/dark” function.
Green LED also flashes during
the DISARM mode.
2. 3 Blue LEDs: Illuminate to
confirm a Laser alert. Distinct
patterns confirm if the alert is
from the front or rear.
3. “F” Red LED: Illuminates red
to confirm a Laser alert from the
front of your vehicle.
4. “R” Red LED: Illuminates red
to confirm a Laser alert from the
rear of your vehicle.
5
Loading...