Belshaw Adamatic TYPE K Donut Dispenser User Manual
TYPE K DONUT DEPOSITOR
FEATURES
Belshaw’s Type K Donut Depositor is ideal for creating perfectly
formed cake donuts. The Type K is quick and easy to use and
provides accurate portion control at a variety of sizes with a
single plunger.
Belshaw’s Type K depositors are designed to be mastered by
the novice in minutes. Operation is easily accomplished with
minimal waste, and consistent deposits are easily delivered
time after time.
The Type K offers 6 volume settings located on the handle.
Typical weight range is from 1.2 - 1.8 oz (34 - 50g). An
consistently shaped product is delivered time after time.
The hopper holds 5.5 lbs of batter (2.5 kg), allowing
approximately 58 deposits of 1½ oz (43g). Each hopper is
constructed of aluminum to reduce weight. Each plunger and
built-in cylinder is constructed of stainless steel to assure
durability. The entire unit is corrosion resistant and easy to
clean.
Two plungers are available, a 1-9/16" plunger for standard size
donuts and a 1" plunger for mini donuts. In addition the Donut
Depositor accepts Belshaw plunger attachments to a plain
plunger. These attachments divide the donut deposit into 2, 3 or
4 pieces (as pictured on facing page)
The Type K Pancake Dispenser is NSF-C2 certified.
Product Line
TYPE K
Donut Dispenser
SPEC
KDONUT
03-2013Model
ACCESSORIES
▪ Item #K-1016WSS: Type K Holder. The stainless steel Type
K Stand is simple, easy to keep clean, and helps keep your
pancake dispenser safe from damage.
▪ Item #K-1011S: Star Plunger (1-9/16" diameter). Produces a
well rounded Ring Donut with a star shape in the center. (See
following page)
▪ Dunkerette, Nugget or Ball attachments: economical
attachments that slide onto a plain or star plunger, to make
smaller donuts. (See following page)
Type K Donut Depositor
with Holder (Item #K-1016WSS)
90 Years of Quality Donut & Bakery Equipment
BELSHAW ADAMATIC BAKERY GROUP
814 44th St NW, Suite 103
Auburn, WA 98001 USA
PART OF ALI GROUP S.P.A.
©Belshaw Adamatic Bakery Group Product specifications may be changed without notice. Current version available at www.belshaw-adamatic.com
CONTACT
800.578.2547 (USA/CANADA)
(+1)206.322.5474 Worldwide
service@belshaw.com
WEB
www.belshaw-adamatic.com
www.belshaw.com
www.adamatic.com
SPEC
KDONUT
03-2013
Page 1 of 2
Product Line
TYPE K
Donut Dispenser
SPEC
KDONUT
03-2013Model
CONSTRUCTION
▪ Aluminum hopper
▪ Stainless steel plunger and cylinder
PLUNGER
▪ 1-9/16" plain plunger (makes standard
ring donuts)
CAPACITY AND DEPOSIT WEIGHTS
▪ Hopper capacity: up to 5.5 lbs (2.5 kg)
batter weight
▪ Deposits per hopper when full: approx
58 x 1½ oz (43g) deposits
▪ 6 weight settings on handle
▪ Weight range 1/2 – 1.8 oz (34 – 50g)
per deposit
SHIPPING DATA
▪ Carton width: 7½"
▪ Carton depth: 7½"
▪ Carton height: 14½"
▪ Carton weight: 3 lbs
MODEL SELECTION
▪ Item Nbr 8504022: Type K Donut
Depositor with 1-9/16" plunger
▪ Item Nbr 8504052: Type K Donut
Depositor with single 1" plunger (for mini
donuts)
▪ Item Number K-1016WSS: Holder for
Type K:
CERTIFICATION
12 7/8"
(33 cm)
▪ Weights are approximate and can vary
WEIGHT AND DIMENSIONS
▪ Overall height: 12-7/8" (33 cm)
▪ Hopper diameter: 6½" (16.5 cm)
Certified by NSF(C2)
PLUNGER AND ATTACHMENT SELECTION GUIDE
Item Number Plunger / Attachment Plunger Donut type
#8504022
INCLUDES TYPE K
WITH PLAIN PLUNGER
1-9/16
PLAIN PLUNGER
1-9/16" DIAMETER
For standard Ring donuts. Also makes
"Old Fashion" donuts using Old Fashion
donut mix. Size is adjustable using
weight adjuster on Type K
6 1/2"
(16.5 cm)
Plunger
Handle
and weight
adjuster
Hopper
Cylinder
#8504052
INCLUDES TYPE K
WITH 1" PLUNGER
DR42-1018x1.563
(Option)
DR42-1016x1.563
(Option)
DR42-1017x1.563
(Option)
MINI DONUT PLUNGER
1" DIAMETER
For mini donuts. Size is adjustable using
weight adjuster on Type K
DUNKERETTE ATTACHMENT
Attaches to a Plain Plunger. Forms 2
half-donuts as shown. Size is adjustable
using weight adjuster on Type K
NUGGET ATTACHMENT
Attaches to a Plain Plunger. Produces 3
separate or joined balls, depending on
the height of the hopper and the type
of mix. Size is adjustable using weight
adjuster on Type K
BALL ATTACHMENT
Attaches to a Plain Plunger. Produces 4
separate balls, or joined balls, depending
on the height of the hopper and the type
of mix. Size is adjustable using weight
adjuster on Type K
90 Years of Quality Donut & Bakery Equipment
BELSHAW ADAMATIC BAKERY GROUP
814 44th St NW, Suite 103
Auburn, WA 98001 USA
PART OF ALI GROUP S.P.A.
©Belshaw Adamatic Bakery Group Product specifications may be changed without notice. Current version available at www.belshaw-adamatic.com
CONTACT
800.578.2547 (USA/CANADA)
(+1)206.322.5474 Worldwide
service@belshaw.com
WEB
www.belshaw-adamatic.com
www.belshaw.com
www.adamatic.com
SPEC
KDONUT
03-2013
Page 2 of 2
Loading...