Belshaw Adamatic MARK II User Manual

Type INSIDER Ventless Donut Center

The Insider is Belshaw’s distinctive donut frying system that eliminates the need for a standard exhaust hood. With its ability to operate indoors, the Insider offers unique benefits:

The Insider can be easily moved from one place to

•

another. The exhaust hood is built-in and there is no exterior ductwork.

Customers in high traffic areas can watch the Insider

•

frying donuts automatically. The operator has only to mix batter, fill the Donut Robot® hopper and bag donuts from the Roto-Cooler, a rotating tray that collects the donuts automatically.

The Insider eliminates the purchase and installation cost

•

of standard ventilation and fire suppression hoods.

The Insider is designed to attract the interest of

•

passers-by. With its large window viewing area and attractive appearance the Insider has great merchandising potential. Vehicle-style graphic wraps can easily be applied to top, bottom and side panels.

The Insider addresses fire prevention, air filtration, and

•

sanitation requirements. Cabinet and fryers are tested by ETL and listed to UL-197, UL-710B, CSA C22.2 and NSF-4 standards.

Models

INSIDER/Mark II • INSIDER/Mark V

VIDEO: https://vimeo.com/belshaw/insider

COMPONENTS OF INSIDER DONUT SYSTEM

Insider Clean-Air Cabinet

•

Donut Robot® Fryer, either:

•

- Mark II

- Mark II GP (mini donut model)

- Mark V

- Mark V GP (mini donut model)

EZMelt 18 Melter-Filter.

•

- The EZMelt can be placed inside the cabinet directly below the fryer. It will quickly empty, filter and refill the shortening in the fryer.

Roto-Cooler.

•

- Rotating tray that collects donuts after frying.

Donut Robot® Mark II / Mark II GP Donut Robot® Mark V / Mark V GP

Photo shows Insider with Donut Robot® and Roto-Cooler with sample graphic wrap.

Inset shows Mark II and Mark V GP. The Insider accepts either Mark II • Mark II GP • Mark V • Mark V GP

EZ Melt 18 Roto-Cooler Insider / Mark V (without graphic wrap)

90 Years of Quality Donut & Bakery Equipment

BELSHAW ADAMATIC BAKERY GROUP

814 44th St NW, Suite 103 Auburn, WA 98001 USA

PART OF ALI GROUP S.P.A.

CONTACT

800.578.2547 (USA/Canada) (+1) 206.322.5474 Worldwide info@belshaw.com

WEB

www.belshaw.com

Page 1 of 2

Type INSIDER Ventless Donut Center Models INSIDER/Mark II • INSIDER/Mark V

84" (213 cm)

Clearance 36" (92 cm)

for operator

DONUT ROBOT

ROTO COOLER

FIRE SUPPRESSION

MANUAL PULL STATION

WET FIRE

SUPPRESSION

CYLINDER

6.5" (16 cm)

FIRE SUPPRESSION

CONTROL BOX

EZMELT 18

MELTER FILTER

POWER

OVERALL HEIGHT:

91.5" (232 cm)

35" (89 cm)

PLUG NEMA #14-50 (1-PHASE)

STANDARD FEATURES - INSIDER CABINET

Air recycling system, with fan-assisted grease filter, electronic filter, and odor

•

filters Interlock system to ensure ventilation is active. Fryer is otherwise shut down or

•

unable to start Donut Robot® fryer (specify model from list below) and Roto-Cooler

•

Fire suppression system (Pyro-Chem Kitchen Knight II, PLC-240/300).

•

Operates automatically, also manually from a pull station Stainless steel construction

•

Removable clear polycarbonate viewing windows

•

Heavy Duty 4" casters (feet optional)

•

COMPATIBILITY WITH DONUT ROBOT® FRYERS

Insider is compatible only with Donut Robot® Mark II, Mark II GP, Mark V, or Mark V GP

For standard size donuts, use Donut Robot® Mark II or Mark V

•

For mini donuts, use Donut Robot® Mark II GP or Mark V GP

•

To make standard size AND mini donuts, use Donut Robot® Mark II or Mark V,

•

along with Mini Donut Hopper/Plunger Kit, Part #MK-1502-1 See Donut Robot Mark II/Mark V spec sheet for specifications

•

Insider is not compatible with Donut Robot® Gas Mark II/Mark II GP

•

DONUT ROBOT® FRYERS – CAPACITY ESTIMATES

Standard Donuts Mini Donuts

Mark II

Mark II GP –

Mark II with Minidonut Kit

Mark V

Mark V GP –

Mark V with Minidonut Kit

Estimates are based on full capacity at frying times of 95 seconds for standard donuts and 60 seconds for mini donuts.

37 Dozen/hour –

153 Dozen/hour 37 Dozen/hour 109 Dozen/hour 56 Dozen/hour –

226 Dozen/hour 56 Dozen/hour 163 Dozen/hour

AIR DISCHARGE

HOOD/CLEAN AIR ASSEMBLY

STOP/START SWITCH

FILTRATION RECEPTACLE

FRYER RECEPTACLE

12" (30 cm)

POWER CORD 72" (183 cm)

NEMA #6-50P (3-PHASE)

OTHER EQUIPMENT

EZ Melt 18 melter-filter system (purchased separately)

•

ELECTRICAL INFORMATION

Single power connection.

•

208-240V, 50/60hz, 1ph

•

- Insider with Donut Robot® Mark II/Mark II GP: up to 36 Amps

- Insider with Donut Robot

North America models supplied with NEMA#14-50 plug

•

Contact factory for 3-phase and international voltage options

•

INSTALLATION

Installation and usage may require approval by local jurisdictions. (Customer is responsible for such approval)

Clearance

36" (92 cm) space at rear to allow room for operator, and to

•

allow EZMelt 18 Melter Filter to roll out 36" (92 cm) at left side (viewed from rear) for operator access

•

to the left and rear of the unit 18" (45 cm) overhead clearance for air discharge (nominal)

•

SHIPPING WEIGHT AND DIMENSIONS (estimated)

90" W x 43" D x 89" H (228 x 109 x 226 cm)

•

1400 lbs (636 kg)

•

STANDARDS CERTIFICATION

UL197

UL710B

Certified by ETL to UL-197, UL-710B, NSF-4 and CSA C22.2

•

standards. (ETL Control #68183) CE models available for European Union and other countries

•

NSF STD 4 CSA C22.2

Nominal clearance

for air discharge

Clearance 36" (92 cm)

for operator

REAR

POWER

31" (79 cm)

Mark V/Mark V GP: up to 50 Amps

18" (45 cm)

FRONT