Belshaw Adamatic Mark 2 Gp User Manual

belshaw-adamatic.com
Providers of quality bakery equipment for more than 80 years
1-800-578-2547 info@belshaw-adamatic.com www.belshaw-adamatic.com
Top: Donut Robot® Mark 2 (shown with Roto-Cooler)
Donut Robot® Mark 2
Donut Robot
Donut Robot® Series Automatic Fryers deposit, fry, turn, and dispense cake donuts automatically, improving donut quality and reducing costs. Training and labor requirements are substantially reduced while high quality, consistent and repeatable donuts are produced time after time. Additionally, Donut Robot® fryers have been shown to reduce oil use by up to 50% in comparison with kettle fryers. Donut Robot® fryers are fun to watch and always attract passers
by – improving foot trafc and impulse buys.
The Mark 2 gives each donut the same fry automatically, so that donuts are nearly identical. The deposit weight is adjustable within a range. Frying time and oil temperature are also adjustable.
Worldwide compatible voltages available Mark 2 for standard cake donuts Mark 2 GP specialized for mini donut production Raised donut systems available with proofer,
feed table, and specialized trays/cloths
Production rates for the Donut Robot
Standard fryers: 440 donuts per hour at 95 seconds frying time (37 doz)
GP models (mini donuts): 1800 mini donuts per hour at 60 seconds frying time (150 doz)
Your production rate will vary, depending on size and composition of donuts, frying time, oil temperature and other factors
Mark 2 GP
®
Mark 2 are:
Above: Donut Robot
Below: Donut Robot
®
Mark 2
®
Mark 2 GP
BELSHAW ADAMATIC BAKERY GROUP 206-322-5474 ▪ 800-578-2547 ▪ info@belshaw-adamatic.com
814 44th St NW, Suite 103, Auburn, WA 98001 USA • www.belshaw-adamatic.com
©2010 Belshaw Adamatic Bakery Group Specications are subject to change without notice.
Donut Robot® Mark 2 • Mark 2 GP
Standard Features
Automatic cake donut depositor, with nearly identical deposits, synchronized with fryer conveyor
For standard Mark 2, stainless steel "Plain" or "Star" ring donut plunger, 1-9/16" (39.7mm) diameter
For Mark 2 GP, stainless steel double miniature plunger (deposits four mini donuts per plunger stroke).
Aluminum hopper with 10 lbs (4.5kg) batter capacity Batter weight adjustment dial, allows variation from
small to large donuts Stainless steel fryer kettle Kettle drain with cap (extended drain and valve optional) Stainless steel conveyor ensures accuracy of frying time.
Flight bar system for advancing donuts through fryer
On standard Mark 2, ight bars are spaced 3¾" (95mm) apart from center to center. Flight bars are round, ⅜"
(9.5mm) diameter
On Mark 1 GP, ight bars are spaced 3" (76mm) apart from center to center. Flight bars are round, ⅜" (9.5mm)
diameter Automatic turning of donuts Automatic dispensing of fried donuts onto collection
device such as Roto-Cooler Frying time dial sets frying times from approximately 55
to 360 seconds Temperature adjustment (thermostat) High durability, low wattage-density heating elements High temperature limit switch – cuts power to heating
elements at approximately 450°F (232°C) Half-speed switch that reduces automatic cake donut
deposits to 1 donut per conveyor row instead of 2. For GP model, 2 per row instead of 4.
The Mark 2 fryer is compatible with Belshaw Adamatic's "Insider" ventless cabinet
Gas model available (Mark 2 Gas and Mark 2 GP Gas)
Certications
3062800
UL197
ETL certied to UL-197, CSA C22.2 and NSF-4 CE
9700321
NSF STD 4
Electrical
208-240 V, 50/60 Hz, 1 ph, 21-24 A, 4.4-5.8 kW 208-240 V, 50/60 Hz, 3 ph, 12.7-14.7 A, 4.5-5.9 kW 440-480 V, 50/60Hz, 3 ph, 9.1-9.9 A, 5.8-6.9 kW Models available for worldwide voltages
Dimensions and weight (machine only)
Overall width: 41" (104 cm) Overall depth: 21" (52 cm) Overall height, including depositor: 25" (62 cm) Weight: 130 lbs (59 kg)
Dimensions and weight (shipping data)
Shipped in 2 cartons Fryer carton
Dimension: 44" x 24" x 18" Weight: 110 lbs -
Depositor carton
Dimension 16" x 16" x 22" Weight: 24 lbs -
Options
Extended drain with valve (Item# MK-0557) Mini donut conversion kit (Item#MK-1502-1). Kit
includes specialized hopper and double plunger, for depositing 4 mini donuts per conveyor row. Production rate for mini donuts is approximately 1400 mini donuts/ hour at 60 seconds frying time (production rate will vary, dependent on size and composition of donuts, frying time and oil temperature). Changeover from standard to mini donuts and back again takes less than one minute
Accessories
Roto-Coole r (Item #22104). Revolving white polyethylene tray for collecting donuts as they are dispensed from fryer
EZMelt 1 8. Melter-lter for ltering and recycling oil, with xed hose connection available for instant rell of
fryer Shortening Reserve Tank (Item #MKV-1012) Small
s/s container for holding oil or shortening above the
fryer, with a valve for allowing rells to fryer
FT2 Feed Table with trays and cloths for raised donut production
Proofer, icer, glazer and gravity-fed donut collection rack also available. See www.belshaw-
adamatic.com for details.
41” (104 cm) 21” (52 cm)
25”
(62 cm)
BELSHAW ADAMATIC BAKERY GROUP 206-322-5474 ▪ 800-578-2547 ▪ info@belshaw-adamatic.com 814 44th St NW, Suite 103, Auburn, WA 98001 USA • www.belshaw-adamatic.com
©2010 Belshaw Adamatic Bakery Group Specications are subject to change without notice.
Loading...