Belshaw Adamatic Mark 1 User Manual

belshaw-adamatic.com

Providers of quality bakery equipment for more than 80 years

1-800-578-2547 ▪ info@belshaw-adamatic.com ▪ www.belshaw-adamatic.com

Left: Donut Robot® Mark 1 (for standard size donuts

Right: Donut Robot® Mark 1 GP (for mini donuts)

Donut Robot® Mark 1 • Mark 1 GP

Donut Robot® Series Automatic Fryers deposit, fry, turn, and dispense cake donuts automatically, improving donut quality and reducing costs. Training and labor requirements are substantially reduced while high quality, consistent and repeatable donuts are produced time after time. Additionally, Donut Robot® fryers have been shown to reduce oil use by up to 50% in comparison with kettle fryers. Donut Robot® fryers are fun to watch and always attract

passers by – improving foot trafc and impulse buys.

The Donut Robot fry automatically, so that donuts are nearly identical. The deposit weight is adjustable within a range. Frying time and oil temperature are also adjustable.

Worldwide compatible voltages available ▪ Mark 1 for standard cake donuts ▪ Mark 1 GP is specialized for mini donut production ▪

with smaller conveyor pocket and double plunger

Production rates for the Donut Robot® Mark 1 are:

Standard fryers: 156 (13 doz)donuts per hour at ▪ 95 seconds frying time

GP models (mini donuts): 888 (74 doz) mini donuts ▪ per hour at 60 seconds frying time

Your production rate will vary, depending on ▪ size and composition of donuts, frying time, oil temperature and other factors

Mark 1 gives each donut the same

Above: Donut Robot (for standard size donuts)

Below: Donut Robot (for mini donuts)

Mark 1

Mark 1 GP

(More features on reverse side)

BELSHAW ADAMATIC BAKERY GROUP 206-322-5474 ▪ 800-578-2547 ▪ info@belshaw-adamatic.com 814 44th St NW, Suite 103, Auburn, WA 98001 USA • www.belshaw-adamatic.com

Donut Robot® Mark 1 • Mark 1 GP

Standard Features

Automatic cake donut depositor, with nearly identical ▪ deposits synchronized with fryer conveyor

For standard Mark 1, stainless steel "Plain" or "Star" ▪ ring donut plunger, 1-9/16" (39.7mm) diameter

For Mark 1 GP, stainless steel double miniature plunger ▪ (deposits two mini donuts per plunger stroke).

Aluminum hopper with 10 lbs (4.5kg) batter capacity ▪ Batter weight adjustment dial, allows variation from ▪

small to large donuts Stainless steel fryer kettle ▪ Kettle drain with cap (extended drain and valve ▪

optional) Stainless steel conveyor ensures accuracy of frying ▪

time. Flight bar system for advancing donuts through fryer

On standard Mark 1, ight bars are spaced 3¾" ▪ (95mm) apart from center to center. Flight bars are

round, ⅜" (9.5mm) diameter On Mark 1 GP, ight bars are spaced 2.25" (57mm) ▪

apart from center to center. Flight bars are round, ⅜"

(9.5mm) diameter Automatic turning of donuts ▪ Automatic dispensing of fried donuts onto collection ▪

device such as Roto-Cooler Frying time adjustment using a selection of gears ▪ Temperature adjustment (thermostat) ▪ High durability, low wattage-density heating elements ▪ High temperature limit switch – cuts power to heating ▪

elements at approximately 450°F (232°C)

Electrical

120V/50-60hz/1ph, 15A, 1.8 kW ▪ 240V/50-60hz/1ph, 12A, 2.8 kW ▪ 100V/50-60hz/1ph, 18A, 1.8kW (Japan) ▪

Certications

ETL certied to UL-197, CSA C22.2 and NSF-4 ▪

Dimensions and weight (machine only)

Overall width: 35" (89 cm) ▪ Overall depth: 14" (34 cm) ▪ Overall height, including depositor: 23" (57 cm) ▪ Weight: 90 lbs (41 kg) ▪

Dimensions and weight (shipping data)

Shipped in 2 cartons ▪ Fryer carton ▪

Dimension: 44" x 24" x 18" Weight: 76 lbs -

Depositor carton ▪

Dimension 16" x 16" x 22" Weight: 22 lbs -

Options

Mini donut conversion kit (Item#MK-1502-1). Kit ▪ includes specialized hopper and double plunger, for depositing 2 mini donuts per conveyor row. Production rate for mini donuts is approximately 494 (41 doz) mini donuts/hour at 60 seconds frying time (production rate will vary, dependent on size and composition of donuts, frying time and oil temperature as well as other factors). Changeover from standard to mini donuts and back again takes less than one minute

Accessories

Roto-Coole ▪ r (Item #22104). Revolving white

polyethylene tray for collecting donuts as they are dispensed from fryer

Shortening Reserve Tank ▪ (Item #DMM-1004) Small s/s container for holding oil or shortening above the fryer (in order to keep it liquid), with a valve for

allowing rells to fryer Filter-Flo Siphon ▪ (Item #DR42-1048) for removing

shortening from fryer and ltering EZMelt 1 ▪ 8. Melter-lter for ltering and recycling oil,

with xed hose connection available for instant rell of fryer. For the fastest and easiest way to lter and

recycle shortening.

35” (89 cm) 14” (34 cm)

23”

(57 cm)

BELSHAW ADAMATIC BAKERY GROUP 206-322-5474 ▪ 800-578-2547 ▪ info@belshaw-adamatic.com 814 44th St NW, Suite 103, Auburn, WA 98001 USA • www.belshaw-adamatic.com