Belshaw Adamatic IPP-300 Industrial Specifications
IPP-Pocket Proofer Industrial
Glimek´s IPP Industrial Pocket Proofer is constructed as a modular
system to accomodate customer´s specifi ed capacity and proofi ng
times. The IPP-Industrial is equipped with a dual infeed system
loading 2 pcs each time and with a capacity up to 3000 pcs/hr.
Frame, swings and covers are made of stainless steel.
Scandinavian know-how – worldwide
IPP-Pocket Proofer Industrial
Electrical control panel with all controls
for the proofer easily accessable
Non-stick coated transferbox
as standard assures an
interference free production
Pockets made of nylon mesh,
easy to remove for cleaning,
weight range 3.50 - 53 oz
The dual infeed V-belt conveyors up
to 3000 pcs/h is one of three infeed
systems. Non-stick coated fl ap system
loads 2 pcs each time
Electrical sockets provided on the
electrical cabinet for power supply to
and normal shutdown of divider,
rounder and moulder
Accessories
Infeed chute up to
1200 pcs/h (standard) Proofer runs intermittently
Single infeed V-belt up to Photocell controlled with continous prover drive. Can
1800 pcs/h be mounted left/right on front or backside of prover
Double infeed V-belts Photocell controlled with continous prover drive
up to 3000 pcs/h Mounted in front and center of the prover
Flapsystem feed the prover 2 pcs each time
Compressed air is required
Collection drawers 6, 8 or 10 rows Under the prover, for easy cleaning
Electrical control panel Separate control panel under overhead
projection with all controls for the prover
Electrical sockets for divider, Sockets on the electrical cabinet to provide power
rounder and moulder supply to, and common shut down of, divider,
rounder and moulder
Guiding plates, non-stick Guiding the dough piece at the recieving swing,
for very elastic dough pieces
Heating fan Thermostat controlled fan
Humidifi cation system, automatic Hygrostat and thermostat controlled system
Self-contained. 1/4” water supply
Outfeed cross conveyor for single Mounted under the outlet of the pocket prover,
infeed provers 6,8 or 10 rows with width = 13 1/16”. Also available reversible for feeding
height extension. For capacity up in two directions
to 1800 pcs/h
Outfeed cross conveyor for double Mounted under the outlet of the pocket prover,
infeed provers 8 or 10 rows with frequency controlled, width = 13 1/6”
height extension. For capacity up Also available reversible for feeding in two directions
to 3000 pcs/h
Outlet sliding plate covering the Mounted under the outlet of the pocket prover, sliding
3 last fl aps. the dough piece to hopper or table. Non-stick coated
Synchronized speed with Synchronized speed between the dough divider
dough divider (master) and a prover with infeed conveyor
Divider has to be ordered together with the prover
Ultraviolet lighting UV-light to protect against moisture and mould
Technical data
Infeed systems 3 versions (see accessories)
Capacity range max. 3000 pcs/h
Weight range 3.5 oz - 3.3 lb
Power supply 0.60 kW (min)
Air supply (double infeed) 6 bar
Number of effective pockets 132-940
Measurements
6 pockets
8 pockets
10 pockets
W
6´ 5”
7´ 9 1/2”
9´ 2”
Extra module
Height extension module
Total pockets net
Pockets /swing
6810
132
156
240
288
360
432
468
564
When ordering defi ne pockets/swing and swings net, f.ex. IPP 10/48
176
208
320
384
480
576
624
752
Infeed side left, right, front or back
must be specifi ed by order.
Pls communicate delivery size.
220
260
400
480
600
720
780
940
D
6´ 4”
6´ 4”
6´ 4”
+ 23 15/64”
Swings
net
22
26
40
48
60
72
78
94
H1
6´ 8 5/16”
6´ 8 5/16”
6´ 8 5/16”
+ 19 11/16”
Back
modules
1
1
2
2
3
3
H2
8´ 6 3/8”
8´ 6 3/8”
8´ 6 3/8”
+ 19 11/16”
Height
extension
yes
yes
yes
yes
Glimek AB
Box 124
S-280 64 GLIMÅKRA
Sweden
Tel. int. +46-(0)44 449 00 • Fax +46-(0)44 449 10
e-mail: o ce@glimek.se • www.glimek.se
Belshaw Adamatic Bakery Group
814 44th St NW
Suite 103
Auburn Washington 98001
USA
Phone: +1 732 544 8400
Fax: +1 732 544 0735
Loading...