Belshaw Adamatic HG18C User Manual

HG & HG EZ Glazers

Standard & Under Counter

Operator’s Manual

Belshaw Bros., Inc.

814 44TH ST NW Suite 103

Auburn, WA 98001 USA

Phone: [phone] ● Fax: [phone]

Email: [e-mail] ● http://www.belshaw.com

If you accept the machine from the shipping
company, you are, in effect, saying that the
machine is in good condition, and you must
pay for the machine. The freight company has

accepted responsibility for the safe delivery of
our machines. For your protection, inspect the
machine to see that no parts are bent, scratched,
or otherwise damaged. If any damage has
occurred in shipping, file a freight claim with the
shipping company immediately.

IMPORTANT

Keep this manual for future reference.

EQUIPMENT RECORD

Please provide the information below when you correspond with us about your machine.

Purchased by ______________________________________________________________________

Installed by _______________________________________________________________________

Date of installation __________________________ Model number _________________________

Serial number ______________________________________________________________________

020408

MN-1752EN

Belshaw Bros., Inc.

814 44th Street NW, Suite 103

Auburn, WA 98001 USA

Phone: [phone] • Fax: [phone]

Email: [e-mail] • http://www.belshaw.com

Contents

1 Operation 1
2 Cleaning 2

Cleaning the glazer 2
Cleaning the glaze applicator 2

3 Maintenance 3

Belshaw Bros., Inc. • www.belshaw.com • Phone [phone] • Fax [phone]

HG / HGEZ Standard & Under Counter OM MN-1752EN iii

Preface

The HG/HGEZ is designed to glaze donuts on
the top and sides. It creates an even distribution
of glaze.

The HG/HGEZ is designed to be used on a level
floor.

The HG/HGEZ, produces 0.0 dB(A) of
equivalent A-weighted sound pressure at
workstations. This has been determined because
there is no machine operation. Operation of
HG/HGEZ is by a human operator.

Thorough understandings of how to operate,
clean, and maintain the HG/HGEZ safely will
prevent production delays and injuries. The
operator must work safely at all times, read and
follow the instructions in this manual, and heed
all warnings, including the following:

• Do not overfill the glaze kettle. If glaze
overflows the kettle, it could cause
someone to slip on the floor and be
seriously injured.

• To avoid damaging the machine, never
use force to assemble, disassemble,
operate, clean, or maintain it.

• Be careful never to get glaze, water, or
other materials on the floor. If anything
does get spilled on the floor, clean the
area immediately. Materials on the floor
can cause people to slip or fall, resulting
in serious injury or loss of life.

• To prevent damage to the kettle, never
use a metal object to scrape the kettle
use only a plastic or rubber bowl scraper.

Belshaw Bros., Inc. • www.belshaw.com • Phone [phone] • Fax [phone]

iv MN-1752EN HG / HGEZ Standard & Under Counter OM