Belshaw Adamatic EZ Melt 18 Specifications

belshaw-adamatic.com

Providers of quality bakery equipment for more than 80 years

1-800-578-2547 ▪ [e-mail] ▪ www.belshaw-adamatic.com

EZMelt 18 Shortening Melter-Filter

Description

Belshaw’s EZMelt 18 shortening melter-lter

effectively cleans and recycles frying oil or
shortening in any fryer with capacity up to 16.25
gallons (61.5 Liters).

The advantage of a recycling lter that

heats shortening

If zero trans fat shortenings are used, they ▪
gradually become thicker at normal bakery
temperatures. This can lead to pump blockages

and failures with standard lters. Using the

heated EZ Melt overcomes this problem.
Pumping reheated shortening through a xed ▪

connection to the fryer is faster and safer than
any other method, such as dropping in shortening

blocks. The EZMelt does this using a rell hose

(optional) which attaches directly to a Belshaw
fryer.

Rell Hose (optional)

Rinse
Hose

(standard)

Standard features

Capacity 16.25 gallons (29.5 L), approximately ▪
equivalent to 130 lbs (59.5 liters) shortening

Compatible with Belshaw's 618L,718LFG, ▪
718LCG, Donut Robot
Insider. For other brand fryers, check capacity
and dimensions to determine compatibility.

Can be used with any standard donut shortening ▪
including Zero Trans Fat shortening

Heating element with factory set thermostat ▪
to 225°F/107°C. Element tilts up for easy tank
cleaning.

Long-life synthetic lter screen that needs only annual ▪
replacement under normal operating conditions.

Heavy duty pump & motor for pumping shortening to the fryer ▪
on demand

Heavy duty, moisture repellent foot switch for activating pump ▪
Cube cutter for fast melting of solid shortening blocks up to ▪

50lbs (22.7kg)
Detachable, hand held rinse hose with plated steel nozzle and ▪

heat resistant handle.
Slides under compatible oor and tabletop fryers ▪
High-temperature limit switch ▪
Heavy duty stainless steel frame, tank and casters ▪
Certied by ETL to NSF Std 4, CSA C22.2, and UL 1889 ▪

©

Mark 2, Mark 5, and

Foot switch

Long life

lter screen

Heating element
and cube cutter

EZ Melt 18 with Rinse Hose (standard)
and Rell Hose (optional)

Options

Numerous worldwide voltages (see over page) ▪
CE and Aus/NZ models ▪
Rell Hose (see photo at right). Heat resistant hose with ▪

plated steel nozzle designed to attach to designated Belshaw

fryers. The quickest and safest method of relling the fryer

when shortening level is low.

BELSHAW ADAMATIC BAKERY GROUP 206-322-5474 ▪ 800-578-2547 ▪ [e-mail]
814 44th St NW, Suite 103, Auburn, WA 98001 USA • www.belshaw-adamatic.com

©2010 Belshaw Adamatic Bakery Group Specications are subject to change without notice.

Shortening Melter-Filter: EZ Melt 18

Model Selection

Item Nbr Description key Volt, Hz, Phase Amps, Watts Specied options Description key codes

20504 EZ18-120,50/60,1-D 120,50/60,1 15A 1.8KW Standard model C=CE approved

20505 EZ18-208/240,50/60,1-D 208/240,50/60,1 10.3A 2.25KW Standard model

20506 EZ18-120,50/60,1-C 120,50/60,1 15A 1.8KW CE approved

20507 EZ18-208/240,50/60,1-C 208/240,50/60,1 10.3A 2.25KW CE approved

D=Domestic

E=Aus/NZ

Voltage as marked

20501 EZ18-240,50,1-E 240,50,1 10.3A 2.25KW Aus/NZ

Accessories

Item Nbr Description

SM100-0002 Synthetic mesh lter screen (1 screen supplied standard with new EZMelt 18)

EZ18-0506 Rell hose, compatible with 618L, 718L fryers

SM100-0507RH Rell hose, 30" - compatible with Mark II, Mark V, with operator opposite fryer control panel

SM100-0507LH-30 Rell hose, 30"- compatible with Mark II, Mark V, with operator behind fryer control panel

SM100-0507LH-42 Rell hose, 42" - compatible with Insider ventless cabinet, with Mark II/Mark V

Capacity

By weight of shortening: 130 lbs (59 kg) ▪
By volume: 16.25 gallons / 61.5 Liters ▪

Dimensions

Width 21.25" (54cm) Depth: 27.75" (71cm) Height: 25.75" (66cm) ▪

INSERTS THIS WAY

UNDER FLOOR

MODEL FRYERS

Shipping Data

Data is approximate for North America shipments

Carton size: Height 27" x Width 28" x Depth 27" (69cm x 71cm x 69cm) ▪
Carton weight: 120 lbs (55 kg) ▪

Certications

All models certied by ETL to UL-1889, NSF STD 4, and CSA C22.2 ▪
Designated models CE approved (see Model Selection above) ▪

BELSHAW ADAMATIC BAKERY GROUP 206-322-5474 ▪ 800-578-2547 ▪ [e-mail]
814 44th St NW, Suite 103, Auburn, WA 98001 USA • www.belshaw-adamatic.com

©2010 Belshaw Adamatic Bakery Group Specications are subject to change without notice.