Belshaw Adamatic 7B-1009, CAKE DONUT PLUNGERS Specifications

belshaw-adamatic.com

CAKE DONUT PLUNGERS

Serving the donut and bakery industry for over 85 years

1-800-578-2547 ▪ info@belshaw-adamatic.com ▪ www.belshaw-adamatic.com

For Type ‘B’, Type ‘F’, Type ‘N’, Type ‘K’, Donut Robot

A wide selection of specialty cake donuts is possible with an investment in these cake donut plungers. Even greater variety is made possible with the addition of small attachments to a Belshaw plain plunger.

PLAIN STAR FRENCH CRULLER/

Plungers For Type B, Type F and Type N Depositors ►

Type B & F plungers are identical. Type N plungers are sized for Type N only. The French Plunger will make French Crullers with French Cruller mix, or French Cake donuts with standard mix. For size and weight details, see over page.

BALL

(CUTS 2, 3 OR 4)

STICK

(CUTS 1 or 2)

FRENCH CAKE

DUNKERETTE

(CUTS 2)

KRINKLE ‘OLD

CRESCENT

(SMALL)

FASHION’

CRESCENT

(LARGE)

ATTACHMENTS

Plungers For Donut Robot and Type K Donut Depositors

These plungers enable Donut Robots1 and Type K depositors2 to form almost as many cake donut varieties as are possible with Type B, F & N. The French Cake plunger uses regular cake donut mix. By adjusting the height of the depositor, Ball and Nugget attachments will form separate balls and nuggets, or balls and nuggets connected to make a single donut, as shown below.

PLAIN STAR FRENCH CAKE DOUBLE

MINIATURE

(CUTS 2)

NOTES 1 Excluding Mark IX, which us es Type N plungers and cylinders. 2 Double Miniature plunger available f or Donut Robots Mark I - Mar k VI only. A single 1” mini plunger is available for Type K Donut Dep ositor. 3 Double Miniature plunger r equir es mini donut hopper, supplied standard on Donut Robot GP models. A mini donut co nversion kit (consisting of Double

Miniature Hopp er and Plunger) is available for other Donut Rob ots.

DUNKERETTE

(CUTS 2)

BALL

(CUTS 4)

ATTACHMENTS

NUGGET

(CUTS 3)

BELSHAW ADAMATIC BAKERY GROUP 206-322-5474 ▪ 800-578-2547 ▪ info@belshaw-adamatic.com

814 44th St NW, Suite 103, Auburn, WA 98001 USA • www.belshaw-adamatic.com

Plunger Selection Guide

Selection Tips

B, F & N plungers are sized in 1/8” increments

within the MIN - MAX range shown in the table at right (metric equivalents are shown in the table below).

CYLINDERS: For Type B, F, and N depositors, each plunger must match a cylinder of the same size. Several variety plungers may be used with just one cylinder, provided all are the same size diameter.

Right: Type B/F Cylinder. Cylinder inserts into bottom of hopper.

Consult your Belshaw dealer before ordering replacement cylinders.

For Donut Robot® fryers and for Type K depositors,

plungers are available in 4 xed sizes. Each size is

compatible only with the equivalent size hopper. A separate cylinder is not necessary.

The Donut Robot® Mark IX uses an automatic Type N depositor. Choose Type N plungers and cylinder for Mark IX.

Plunger Sizes And Deposit Weight

Product weights are approximate for 1 doz. donuts after frying. Min and Max denote highest

and lowest dial setting on the depositor. Weights

depend on mix and other conditions.

TYPE B,F & N PLUNGERS

Type B, F & N Plungers and Attachments

PLUNGER OR

ATTACHMENT

Plain

Star

French Cruller / French Cake

Krinkle

PLUNGERS

Ball (2,3,4 or 5 Holes)

Stick

(1 Or 2 Slots)

Super (‘Old Fashion’)

Dunkerette (Cuts 2)

Crescent (Small)

Crescent

ATTACHMENTS

(Large)

DEPOSITOR

B,F 7SS 7/8” 2-1/8”

N N-1007SS 7/8” 2-1/4”

B,F 7SC-ss 1” 2-1/8”

N N-1007SSS 1” 2-1/4”

B,F 7B-1009 1-1/8” 2-1/8”

N N-1008SS 1-1/8” 2-1/4”

B,F 7F-1004 1-1/2” 2-1/8”

N N-1012SS 1-1/2” 2-1/4”

B,F 7G-1000 1-1/2” 2-1/8”

N N-1009BSS 1-1/2” 2-1/4”

B,F

N N-1009SS 1-1/2” 2-1/4”

B,F 7-1023 1-1/2” 2”

N N-1023SS 1-1/2” 2-1/4”

B,F,N 178 1-1/2” 2”

B,F,N 164 1-1/2” 2”

B,F,N 163 1-1/2” 2”

NUMBER

7H-1000 (1)

9H-1001 (2)

PART

DIAMETER

(1/8” INCREMENTS

Min Max

1-1/2” 2-1/8”

PLUNGER SIZE PRODUCT WEIGHT

(Per dozen, after frying)

in mm MIN MAX

7/8” 22.2mm 3 oz. (85g) 5 oz. (142g)

1” 25.4mm 5 oz. (142g) 8 oz. (227g)

1-1/8” 28.6mm 6 oz. (170g) 9 oz. (255g)

1-1/4” 31.8mm 8 oz. (227g) 11 oz. (312g)

1-3/8” 34.9mm 10 oz. (284g) 13 oz. (369g)

1-1/2” 38.1mm 12 oz. (340g) 15 oz. (425g)

1-5/8” 41.3mm 14 oz. (397g) 17 oz. (482g)

1-3/4” 44.5mm 16 oz. (454g) 20 oz. (567g)

1-7/8” 47.6mm 19 oz. (539g) 24 oz. (680g)

2” 50.8mm 22 oz. (624g) 27 oz. (765g)

2-1/8” 54.0mm 25 oz. (709g) 30 oz. (851g)

2-1/4” 57.2mm 28 oz. (794g) 34 oz. (964g)

DONUT ROBOT & TYPE K PLUNGERS

PLUNGER SIZE PRODUCT WEIGHT

(Per dozen, after frying)

in mm MIN MAX

1” 25.4mm 5 oz. (142g) 6 oz. (170g)

1-7/16” 36.5mm 13oz. (369g) 17 oz. (482g)

1-9/16” 39.7mm 17oz. (482g) 20 oz. (568g)

1-13/16” 46.0mm 25 oz. (710g) 26 oz. (738g)

Type K And Donut Robot Plungers

PLUNGER OR

ATTACHMENT

Plain

Star

French

PLUNGERS

cake

Miniature

(cuts two)

Dunkerette

(cuts 2)

Ball

(cuts 4)

ATTACHMENTS

Nugget

(cuts 3)

* Pre-2002 Mark I only. Current Mark I uses the same plungers as Mark II - IX. For 2002

machines, or if in doubt, call Belshaw with serial number.

DEPOS-

ITOR

K K-1001A K-1011A

MARK I * DMM-1021 DMM-1012 DMM-1001 DMM-1015

MARK II - VI

K K-1001S K-1011S

MARK I * DMM-1012S DMM-1001S DMM-1015S

MARK II - VI U-1012S U-1001S

K K-1036 K-1015

MARK I DMM-1016 DMM-1017

MARK II - VI U-1015 U-1004

MARK I * DMM-1010

MARK II - VI

K DR42-1018 DR42-1018

MARK I * DR42-1018 DR42-1018

MARK II - VI DR42-1018 DR42-1018

K DR42-1017 DR42-1017

MARK I * DR42-1017 DR42-1017

MARK II - VI DR42-1017 DR42-1017

K DR42-1016 DR42-1016

MARK I * DR42-1016 DR42-1016

MARK II - VI DR42-1016 DR42-1016

PLUNGER SIZE / PART NUMBER

1” 1-7/16” 1-9/16” 1-13/16”

DR42-1152GP

U-1012 U-1001 DR42-1136

DR42-1136S

BELSHAW ADAMATIC BAKERY GROUP 206-322-5474 ▪ 800-578-2547 ▪ info@belshaw-adamatic.com 814 44th St NW, Suite 103, Auburn, WA 98001 USA • www.belshaw-adamatic.com