TPC2133
ASSEMBLY INSTRUCTIONS
OPTION 1
Flat Panel TV Stand Stand with TV Mounting System Stand with Wall Mount
OPTION 2 OPTION 3
FLAT PANEL TV MOUNTING SYSTEM
FOR YOUR SAFETY, PLEASE FOLLOW THESE PRECAUTIONS:
! DO NOT PLACE ITEMS ON THE SHELVES (OR TV MOUNT) WHICH EXCEED THE MAXIMUM WEIGHT LIMITS
OF 125 LBS. FOR THE TV, 50 LBS. FOR MIDDLE SHELF, AND 75 LBS. FOR LOWER SHELF. ALWAYS PLACE
THE HEAVIEST COMPONENTS ON THE BOTTOM SHELF.
! ONLY WALL MOUNT INTO WOOD STUDS OR CONCRETE WALLS. DO NOT ATTEMPT TO WALL MOUNT THE
TELEVISION INTO DRYWALL ONLY.
! THE MAXIMUM WEIGHT OF YOUR TELEVISION CANNOT EXCEED THE MAXIMUM WEIGHT RATING OF THE
WALL MOUNT.
! ALWAYS REMOVE THE TV AND OTHER EQUIPMENT FROM THE FURNITURE PRIOR TO MOVING THE
ASSEMBLED UNIT.
! WHEN IN USE, THIS FURNITURE MUST BE PLACED ON A FLAT, SOLID AND LEVEL SURFACE.
! DO NOT LEAN ON THE TV WHEN IT IS ON THE TV STAND.
! DO NOT CLIMB OR STEP ON THE STAND.
! DO NOT BANG INTO OR PLACE YOUR OWN WEIGHT ON ANY OF THE SHELVES.
! THIS PRODUCT WAS DESIGNED TO BE INSTALLED AND UTILIZED ONLY
BELL’O INTERNATIONAL CORPORATION WILL NOT BE RESPONSIBLE FOR FAILURE TO ASSEMBLE AS
DIRECTED OR FOR THE IMPROPER ASSEMBLY, USE, OR HANDLING OF THIS PRODUCT.
! IMPROPER INSTALLATION OF THIS PRODUCT MAY CAUSE DAMAGE OR SERIOUS INJURY. BELL'O
INTERNATIONAL CORPORATION CANNOT BE LIABLE FOR DIRECT OR INDIRECT DAMAGE OR INJURY
CAUSED BY INCORRECT MOUNTING, INCORRECT USE, OR INCORRECT ASSEMBLY.
! IF THE MOUNTING BRACKET WILL BE ATTACHED TO ANY STRUCTURE OTHER THAN SPECIFIED IN THIS
MANUAL, ONLY A LICENSED PROFESSIONAL CONTRACTOR/ INSTALLER SHOULD PERFORM THIS
INSTALLATION. THE SUPPORTING STRUCTURE MUST SUPPORT, AT MINIMUM, FOUR TIMES THE COMBINED
WEIGHT OF THE MOUNTING BRACKET AND TV. IT IS THE RESPONSIBILITY AND LIABILITY OF THE INSTALLER
TO ENSURE THE SUITABILITY OF THE SUPPORTING STRUCTURE.
! THE MOUNT WITH THE INCLUDED HARDWARE IS NOT UL LISTED FOR INSTALLATION INTO METAL STUDS.
FOR THE AVAILABILITY OF UL LISTED METAL STUD MOUNTING HARDWARE, MONITOR WEIGHT LIMIT AND
INSTALLATION INSTRUCTIONS PLEASE CHECK WITH YOUR RETAILER OR AN INSTALLATION PROFESSION
AS SPECIFIED IN THIS MANUAL.
AL.
PARTS LIST
#
M1
M2
M3
Part
Quantity
1
1
1
#
M8
M9
M10
Quantity
Part
1
1
65 mm
2
M4
M5
M6
15 mm
1
2
1
M11
M12
M13
4
30 mm
2
1
M7
1
M14
5
PARTS LIST
#
M15
M16
M17
M18
Part
27 mm
Quantity
2
4
4
4
#
M19
M20
M21
M22
Quantity
Part
2
2
1
1
#
TVM1
TVM2
TVM3
TVM4
TVM5
Part
4 x 15 mm
4 x 30 mm
5 x 15 mm
5 x 30 mm
6 x 15 mm
TV MOUNTING SCREWS
Quantity
#
4
4
4
4
4
TVM7
TVM8
TVM9
TVM10
TVM11
Part
Short Spacer
Long Spacer
M4/M5
19mm
8 x 20 mm
8 x 40 mm
Washer
Quantity
4
4
4
4
4
TVM6
6 x 35 mm
4
TVM12
M6/M8
19mm
Washer
4
OPTION 1: FLAT PANEL TV STAND
NOTE: 2 PEOPLE ARE RECOMMENDED TO ASSEMBLE THIS FURNITURE. TO AVOID DAMAGE DURING ASSEMBLY, IT SHOULD BE ASSEMBLED ON A
SOFT SURFACE.
Fig. 1-1
1-1. REMOVE the Frame Assembly (M1) from the packaging and UNFOLD as shown.
M1
Fig. 1-2
M1
1-2. LOCK the Frame Assembly (M1) into an open position by engaging the Locking Mechanisms as shown.
NOTE: IF YOU WILL BE USING THE TPC2133 WITH THE TV MOUNTING SYSTEM (OPTION 2), CONTINUE FOR FURTHER
INSTRUCTIONS. IF YOU WILL BE USING THE WALL MOUNT FEATURE (OPTION 3), PLEASE SKIP TO PAGE 14.
Loading...