Belkin ROUTER N1 User Manual

N1 Wireless Router Quick Installation Guide

Setup OverviewSetup Overview

StepStep

Automatic Confi guration:Automatic Confi guration:

The CD can assist you in The CD can assist you in

Step 1 - Hardware Connections







A

Unplug your modem’s power cord.

Put the Router next to the modem.

Raise the Router’s antennas.

B

Locate the networking cable that connects your
modem and computer.

Unplug that cable from your modem, and plug it into
any gray port on the back of the Router.

C

Find your new networking cable (it came in the box
with your Router) and connect it to the yellow port on
the back of the Router.

Connect the other end to your modem, in the port
that’s now free.

Step 1 - Hardware Connections (continued)

D

Plug in your modem’s power cord.

Wait 60 seconds for the modem to start up.

Plug the Router’s power supply into the black port
on the back.

Plug the other end into the wall outlet.

E

Wait 20 seconds for the Router to start up.

Look at the display on the front of the Router.

Make sure the “Wired” and “Router” icons are lit
up in blue.

If they are not, recheck your connections.

Insert the CD into your computer.

The Setup Assistant will automatically appear on your
computer’s screen.

Follow the instructions there.

Step 2 – Setup Assistant