Belkin RK5020 User Manual

RK5020 INSTRUCTIONS

Tab Screw

Shelf Ta b

RK5020 Product Inventory

Shelf Assembly (1) M6 Cage Nut (8) M6 Screw (8)

Installing Your RK5020 Sliding Shelf

1. Measure the distance from the front of the front rail to the back of the back rail.

2. Loosen the rear tabs on the shelves, adjust to distance measured in step 1 and tighten screws. Note: Maximum tab placement for the RK5020 is 36 inches.

3. Locate position of shelf on rail and insert your M6 cage nuts (8).

4. Mount shelf using the M6 screws supplied.

.belkin.com

www

Belkin Corporation

501 West Walnut Street

Compton, CA 90220-5221, USA

Tel: 310-898-1100; Fax: 310-898-1111

All trade names are registered trademarks of respective manufacturers listed.

RK5020 Instructions Page 1 P35780