Belkin P73783AEN User Manual

™

OmniView

MATRIX2 Series KVM Switch

MATRIX2 Series

User Manual

F1DM208T F1DM216T

TABLE OF CONTENTS

Overview

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Feature Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Equipment Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Operating Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Unit Display Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Installation

Pre-Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Step-by-Step Installation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Powering up the Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Using your MATRIX2

Selecting a Computer Using Direct-Access Port Selectors . . . . . . 17

Selecting a Computer Using Keyboard Hot Key Commands . . . . 19

AutoScan Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Belkin KVM Switches and Accessories

OmniView KVM Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

OmniView All-in-One KVM Cables . . . . . . . . . . . . . . . . . . . . . . 29

OmniView Accessories and Adapters . . . . . . . . . . . . . . . . . . . . . 31

MATRIX2 Series FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

OVERVIEW

INTRODUCTION

Congratulations on your purchase of this Belkin OmniView MATRIX2 Series KVM Switch (the MATRIX2). Our diverse line of KVM solutions exemplifies the Belkin commitment to delivering high-quality, innovative products at reasonable prices.

Developed with the server administrator in mind, the MATRIX2 surpasses all other switches on the market. It gives two users control over multiple computers and servers from two consoles—simultaneously. Engineered to work with the most advanced server room and laboratory environments, it offers LED port indicators, direct-access port selectors, higher videoresolution support than comparable products, and flash-upgradeable firmware. The MATRIX2 also comes with the unparalleled assurance of a Belkin Five-Year Warranty.

This manual will provide details about your new MATRIX2, from installation and operation to troubleshooting, in the unlikely event of a problem.

For quick and easy installation, please refer to the Quick Installation Guide included in your MATRIX2 packaging.

Thank you for purchasing this great solution from Belkin. We appreciate your business and have confidence that you will soon see for yourself why over 1 million Belkin OmniView products are being used worldwide.

Package Contents

• OmniView MATRIX2 Series KVM Switch

• Adjustable Rack-mount Brackets with Screws

• DB25-to-RJ45 Parallel Flash Cable

• User Manual

• Quick Installation Guide

• 12-Volt DC, 1-Amp power supply

• Registration Card

OVERVIEW

The MATRIX2 allows two users to control up to a maximum of 256 computers from two keyboards, monitors, and mice. They support PS/2 input devices (keyboard and mouse) as well as VGA, SVGA, XGA, and XGA-2 video.

It supports both PS/2 and USB output. This enables cross-platform control over PCs and USB-based computers, including USB Sun

™

workstations

and Mac

computers.

FEATURE OVERVIEW

Hot Keys:

Hot key functionality allows you to select a desired port using designated key commands. By using a simple hot key sequence on your keyboard, selecting one computer from as many as 256 computers is instantaneous. For a listing of complete hot key instructions and commands, see page 19.

AutoScan:

The AutoScan feature allows you to set your MATRIX2 to scan and monitor the activities of all operating computers connected to the switch, one by one. The time interval allotted for each computer can be defined or adjusted through the On-Screen Display (OSD) menu. For complete instructions on AutoScan usage, please refer to page 21.

Video Resolution:

Through a 400MHz bandwidth, MATRIX2s support video resolutions of up to 2048x1536@85Hz. To preserve signal integrity at these higher resolutions, your MATRIX2 requires 75-Ohm, coaxial VGA cabling.

Flash Upgrade:

Flash upgradeable firmware allows you to obtain the latest firmware upgrades for your MATRIX2. This enables your MATRIX2 to maintain consistent compatibility with the latest devices and computers. Firmware upgrades are free for the life of your MATRIX2. Refer to the enclosed flash upgrade instruction document or visit us at belkin.com for complete upgrade information and support.

OVERVIEW

On-Screen Display (OSD):

The OSD feature simplifies server management by allowing you to assign individual names to each connected server throughout the system. It provides a visual means of switching between computers and setting the time interval for the AutoScan function.

Direct-Access Port Selector:

Direct-access port selectors, located conveniently on the front face of the MATRIX2, allow for simple, manual port-selection. Each button controls a port.

LED Display:

An LED display on the face of the MATRIX2 serves as a status monitor. An LED next to each direct-access port selector illuminates to indicate that the console currently controls the corresponding computer. As a port is selected, the LED next to it lights up. A flashing LED light indicates that there is no computer connected to that port.

Seven-Segment LED Display:

When daisy-chaining multiple MATRIX2s together, the seven-segment LED display serves as a quick indicator of the selected BANK.

OVERVIEW

EQUIPMENT REQUIREMENTS

Cables:

To connect to the MATRIX2, an OmniView All-in-One MATRIX Series KVM Cable is necessary. Video resolution support of up to 2048x1536@85Hz requires use of a 75-Ohm, coaxial VGA cable to preserve signal integrity. VGA cables must have HDDB15 female-toHDDB15 male connectors.

Belkin highly recommends that you use OmniView All-In-One MATRIX Series KVM Cables. These cables offer the highest quality possible to ensure optimal data transmission. The MATRIX Series KVM Cables feature micro-cable construction and are molded together for a neat and organized setup. PC99 color-coded connectors are included for easy identification and connection. The MATRIX Series KVM Cables include an industry-standard, 14-pin, coaxial VGA cable; nickel-plated connectors for high-resolution applications; double-shielded cabling to reduce EMI/RFI interference; strain-relief construction for added durability; and ferrite bead for noise immunity. They are available in both USB and PS/2 connector types. The following cables are recommended for your MATRIX2:

OmniView All-In-One MATRIX Series

F1D9300-XX (PS/2 Style) F1D9301-XX (USB Style)

OmniView MATRIX2 Series Daisy-Chain

F1D9302-XX (Daisy-Chain Cable)

(-XX denotes length in feet)

OVERVIEW

OPERATING SYSTEMS

The MATRIX2 is designed for use on CPUs using:

Platforms:

• Windows®95/98/2000/Me/NT®/XP

• DOS

• Turbolinux

and all Linux®distributions

• Novell

NetWare®4.x/5.x

•Mac

(with USB support)

• Sun (with USB support)

Keyboards:

• Supports 101-/102-/104-key keyboards

Mice:

• Microsoft®software-compatible PS/2 or PS/2 & USB combo mice (with PS/2 adapter) having 2, 3, 4, or 5 buttons

• Microsoft software-compatible PS/2 wireless or optical mice

Monitor:

• VGA

• SVGA

• MultiSync

OVERVIEW

UNIT DISPLAY DIAGRAMS

Front View of the MATRIX2

Back View of the MATRIX2

Console B

direct-access

port selector

Console A

Manual BANK

scroll buttons

Console A

7-segment LED for selected

BANK identification

Console B LED for

selected port identification

DC power

jack

BANK DIP switch (may

be located on the side

in some models)

FLASH DIP switch

(may be located on the

side in some models)

Flash upgrade port

DB25 CPU

connector

Daisy-chain Output port

Daisy-chain

Input port

Console B

Manual BANK

scroll buttons

Console B

7-segment LED for selected

BANK identification

Console A LED for

selected port identification

Console A

direct-access

port selector

Console B VGA

and PS/2

connections

Console A VGA

and PS/2

connections

OVERVIEW

SPECIFICATIONS

Part No.: F1DM208T, F1DM216T Power: 12-Volt DC, 1-Amp power adapter with center-pin positive polarity Daisy-Chain: Maximum of 16 KVM Switches Computer Connections Supported: 8 (F1DM208T); 16 (F1DM216T) Keyboard Emulation: PS/2 Mouse Emulation: PS/2 Monitors Supported: VGA, SVGA, MultiSync, and LCD (optional adapter may

be required)

Max. Resolution: 2048x1536@85Hz Bandwidth: 400MHz CPU Input: DB25 (Video, PS/2, or USB) Port LED Indicators:

16 (F1DM208T) 32 (F1DM216T)

Enclosure: Metal enclosure with high-impact plastic faceplate Dimensions:

F1DM208T: 17.25 x 1.75 x 8.9 inch (438 x 44.5 x 225.5mm) F1DM216T: 17.25 x 3.5 x 8.9 inch (438 x 88.85 x 225.5mm)

Weight:

F1DM208T: 9.75 lbs. (4420.5 grams) F1DM216T: 11.7 lbs. (5307.5 grams)

Operating Temp.: 32° to 104° F (0~40° C) Storage Temp.: -4° to 140° F (20~60° C) Humidity: 0-80% RH, non-condensing Warranty: 5 years

Note: Specifications are subject to change without notice.

INSTALLATION

PRE-CONFIGURATION

Where to Place the MATRIX2:

The enclosure of the MATRIX2 is designed for standalone or rack-mount configuration. The MATRIX2 is natively rack-mountable in standard 19-inch server racks. Rack-mount hardware is included with these switches for a sturdy rack installation.

Consider the following when deciding where to place the MATRIX2:

• whether or not you intend to use the direct-access port selectors;

• the lengths of the cables attached to your keyboards, monitors, and mice;

• the location of your CPUs in relation to your Consoles;

• and the lengths.

Cable Distance Requirements:

For PS/2 Computers:

VGA signals transmit best at distances of up to 25 feet. Beyond that length, the probability of video degradation increases. For this reason, we recommend that the length of the cables between the MATRIX2 and the connected computers not exceed 25 feet.

Note: If you need your Console to reside further than 25 feet from the

MATRIX2, we recommend using the Belkin CAT5 Extender (F1D084) with a standard CAT5 UTP cable. By using this device, you may increase the distance between your MATRIX2 and your PS/2 keyboard, PS/2 mouse, and monitor by as much as 500 feet without risking signal degradation.

For USB Computers:

USB signals can be transmitted up to 15 feet between the MATRIX2 and the CPU. Beyond 15 feet, the probability of signal failure is likely, and this may cause the device to fail.

Cautions and Warnings:

Avoid placing cables near fluorescent lights, air conditioning equipment, or machines that create electrical noise (e.g., vacuum cleaners).

INSTALLATION

STEP-BY-STEP INSTALLATION GUIDE

Cautions and Warnings:

Before attempting to connect anything to the MATRIX2 or your computer(s), please ensure that everything is powered off. Plugging and unplugging cables while computer(s) are powered on may cause irreversible damage to the computer(s) and/or the MATRIX2(s). Belkin Components is not responsible for damage caused in this way.

Installing the MATRIX2 into a Server Rack:

The MATRIX2 includes adjustable mounting brackets ideal for installation in 19-inch racks. The mounting brackets feature three adjustment positions to allow the faceplate of the MATRIX2 to mount flush to your rack-mounted servers, or to the rack. Please follow these simple steps to achieve the desired adjustment.

1. Determine how far you would like the MATRIX2 to protrude from the rack. Select a bracket-hole scheme.

2. Attach the bracket to the side of your MATRIX2 using the Phillips screws provided. (Refer to diagram above).

3. Mount the MATRIX2 to the rack rail assembly.

Note: If this MATRIX2 will be daisy-chained to another MATRIX2, set

the BANK address prior to installing on a rack. Refer to the section in this User Manual labeled “Connecting Multiple MATRIX2s (Daisy-Chaining)” (page 12).

Your MATRIX2 is now mounted securely into the bracket and you are now ready to connect cables to it at the back.

INSTALLATION

SINGLE MATRIX2 INSTALLATION

This section provides complete instructions for the hardware setup of a single MATRIX2 (F1DM208T, F1DM216T).

PS/2 Installation: Keyboard, Video, and Mouse Connections

Connect the Console:

1. Connect the first monitor to the MATRIX2. Attach your monitor cable to the HDDB15 female port labeled “Console A VGA” on the back of the MATRIX2.

2. Connect the PS/2 keyboard cable to the keyboard port on the back of the MATRIX2 in the “Console A” section.

3. Connect the PS/2 mouse cable to the mouse port on the back of the MATRIX2 in the “Console A” section.

4. Repeat steps 1 through 3 for Console B.

Console B

Console A

Console B

Console A

+ 28 hidden pages