Belkin F5D8636-4 User Manual

N Wireless Modem Router

User Manual

P M0 1 5 27 e a F5 D 8 6 3 6 - 4

English

Français

DEutsch

nEDErlanDs

Español

italiano

TABLE OF CONTENTS

Table of Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Advantages of a Wireless Network ............................1

Placement of your N Wireless Modem Router....................3

2 Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Product Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3 Knowing your Modem Ro uter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Package Contents ..........................................8

System Requirements .......................................9

Setup Assistant Sof tware System Requirements .................9

4 Connecting and Con figuring your Modem Router ..........13

5 Alternate Set up Method ............................... 27

SECTIONS 1 2 3 4 5 6 7 8 9

6 Using the Web-Based Advanced User Inter face ........... 38

Changing LAN Settings.....................................39

Viewing the DHCP Client List Page ...........................41

Configuring the Wireless Network Settings .....................41

Setting WPA Security ......................................49

Setting WEP Encryption ....................................50

Setting MAC Address Control ...............................52

Configuring the Firewall ....................................54

Using D ynamic DNS .......................................59

Utilities ..................................................61

Restarting the Router ......................................61

Updating the Firmware .....................................66

7 Manually Conf iguring Network Set tings .................. 74

8 Recommen ded We b Browser Settings ................... 79

9 Troubl eshooting ....................................... 81

10 Information .......................................... 94

N Wirel ess Modem Ro uter

INTRODUCTION

SECTIONSTable of Contents 2 3 4 5 6 7 8 9

Thank you for purchasing the Belkin N Wireless Modem Router (the Router). Following are two short sections—the first discusses the benefits of home networking, and the other outlines best practices that maximize your wireless home network range and performance. Please be sure to read through this User Manual completely, and pay special attention to the section entitled “Placement of your N Wireless Modem Router” on page 3.

Benefits of a Home Network

• Share one high-speed Internet connection with all the computers in your home

• Share resources, such as files and hard drives among all the connected computers in your home

• Share a single printer with the entire family

• Share documents, music, video, and digital pictures

• Store, retrieve, and copy files from one computer to another

• Simultaneously play games online, check Internet email, and chat

Advantages of a Wireless Network

Here are some of the advantages of setting up a Belkin Wireless Network:

• Mobilit y – you’ll no longer nee d a dedicated “computer room”— now you can work on a networked laptop or desktop computer anywhere within your wireles s range

• Easy installation – Belkin’s Setup Assistant application makes setup simple

• Flexibility – set up and access printers, computers, and other networking devices from any where in your home

• Easy Expansion – the wide range of Belkin networking products let you expand your network to include devices such as printers and gaming consoles

• No cabling required – you can spare the expense and hassle of retrofitting Ethernet cabling throughout the home or office

• Widespread industry acceptance – choose from a wide range of interoperable networking products.

N Wirel ess Modem Ro uter

INTRODUCTION

SECTIONSTable of Contents 2 3 4 5 6 7 8 9

Revolutionary N Wireless Technology with MIMO (N MIMO)

Your Belkin N Wireless Modem Router uses a new smart-antenna technology called Multiple Input Multiple Output (MIMO). N MIMO complies with the IEEE draft 802.11n specification. It increases speed, range, reliability, and spectral efficiency for wireless networking systems.

The element that makes Belkin’s N MIMO technology different from a conventional radio is the use of multiple antennas and two simultaneous data streams to deliver wireless transfers around your home or office. A conventional radio uses one antenna to transmit a data stream. Belkin’s N MIMO, on the other hand, uses two antennas. This design helps combat distortion and interference. Belkin’s N MIMO is multidimensional. It builds on one-dimensional smar t-antenna technology by simultaneously transmitting two data streams through the same channel, which increases wireless capacit y.

Another element that enhances Belkin’s N MIMO is the use of aggregation as specified in the draft 802.11n specification. By shortening the space between packets and combining multiple smaller packets into one larger packet, Belkin’s N MIMO can transmit more data through available bandwidth.

Think of conventional radio transmission as a two-lane highway. The speed limit governs the maximum allowable flow of traffic through that lane. Compared with conventional radios, one-dimensional smart antenna systems help move traffic through that lane faster and more reliably—analogous to a four-lane road on which traffic consistently moves at a rate closer to the speed limit. Belkin’s N MIMO helps traffic move at the speed limit and opens more lanes—to become the superhighway in this example. The rate of traffic flow is multiplied by the number of lanes that are opened.

N Wirel ess Modem Ro uter

INTRODUCTION

SECTIONSTable of Contents 2 3 4 5 6 7 8 9

Placement of your N Wireless Modem Router

Important Factors for Placement and Setup

Your wireless connection will be stronger the closer your computer is to your Router. Typical indoor operating range for wireless devices is between 100 and 200 feet.

In the same way, your wireless connection and performance will degrade somewhat as the distance between your Router and connected devices increases. This may or may not be noticeable to you. As you move further from your Router, connection speed may decrease. Factors that can weaken signals simply by getting in the way of your network’s radio waves are metal appliances or obstructions, and walls.

If you have concerns about your network’s per formance that might be related to range or obstruction factors, try moving the computer to a position between five and 10 feet from the Router in order to see if distance is the problem. If difficulties persist even at close range, please contact Belkin Technical Support.

Note: While some of the items listed below can affect network performance, they will not prohibit your wireless network from functioning; if you are concerned that your network is not operating at its ma ximum effectiveness, this checklist may help.

1. Router Placement

Place your Router, the central connection point of your network, as close as possible to the center of your wireless network devices.

To achieve the best wireless network coverage for your “wireless clients” (i.e., computers enabled by Belkin Wireless Notebook Network Cards, Wireless Desktop Network Cards, and Wireless USB Adapters):

• Ensure that your Router’s networking antennas are parallel to each other, and are positioned vertically (toward the ceiling). If your Router itself is positioned vertically, point the antennas as much as possible in an upward direction.

• In multistory homes, place the Router on a floor that is as close to the center of the home as possible. This may mean placing the Router on an upper floor.

• Try not to place the Router near a cordless 2.4GHz phone.

2. Avoid Obstacles and Interference

Avoid placing your Router near devices that may emit radio “noise,” such as microwave ovens. Dense objects that can inhibit wireless communication include:

• Refrigerators

• Washers and/or dryer s

• Metal cabinets

• Large aquariums

• Metallic-based UV tinted windows

N Wirel ess Modem Ro uter

INTRODUCTION

SECTIONSTable of Contents 2 3 4 5 6 7 8 9

If your wireless signal seems weak in some spots, make sure that objects such as these are not blocking the signal’s path (between your computers and Router).

3. Cordless Phones

If the performance of your wireless network is impaired after attending to the above issues, and you have a cordless phone:

• Try moving cordle ss phones away from your Router and your wireless-enabled computers.

• Unplug and remove the battery from any cordless phone that operates on the 2.4GHz band (check manufacturer’s information). If this fixes the problem, your phone may be interfering.

• If your phone supports channel selection, change the channel on the phone to the farthest channel from your wireless network. For example, change the phone to channel 1 and move your Router to channel 11. See your phone’s user manual for detailed instructions.

• If necessar y, consider switching to a 900MHz or 5GHz cordless phone.

4. Choose the “Quietest” Channel for your Wireless Network

In locations where homes or offices are close together, such as apartment buildings or office complexes, there may be wireless networks nearby that can conflict with yours.

Use the Site Survey capabilities found in the Wireless Utility of your wireless adapter to locate any other wireless networks that are available (see your wireless adapter’s user manual), and move your Router and computers to a channel as far away from other networks as possible.

• Experiment with more than one of the available channels, in order to find the clearest connection and avoid interference from neighboring cordless phones or other wireless devices.

• For Belkin wireless networking products, use the detailed Site Survey and wireless channel information included with your wireless network card. See your network card’s user guide for more information.

These guidelines should allow you to cover the maximum possible area with your Router. Should you need to cover an even wider area, we suggest the Belkin Wireless Univer sal Range Extender/Access Point.

N Wirel ess Modem Ro uter

INTRODUCTION

SECTIONSTable of Contents 2 3 4 5 6 7 8 9

5. Secure Connections, VPNs, and AOL

Secure connections typically require a user name and password, and are used where security is important. Secure connections include:

• Virtual Private Network (VPN) connections, of ten use d to connect remotely to an office network

• The “Bring Your Own Access” program from America Online (AOL), which lets you use AOL through broadband provided by another cable or DSL service

• Most online banking websites

• Many commercial websites that require a user name and password

to access your account

Secure connections can be interrupted by a computer’s power management setting, which causes it to “go to sleep.” The simplest solution to avoid this is to simply reconnect by rerunning the VPN or AOL software, or by re -logging into the secure website.

A second alternative is to change your computer’s power management settings so it does not go to sleep; however, this may not be appropriate for portable computers. To change your power management setting under Windows, see the “Power Options” item in the Control Panel.

If you continue to have difficulty with Secure Connections, VPNs, and AOL, please review the steps above to be sure you have addressed these issues.

N Wirel ess Modem Ro uter

PRODUCT OVERVIEW

SECTIONSTable of Contents 1 3 4 5 6 7 8 9

Product Features

In minutes you will be able to share your Internet connection and network your computer s. The following is a list of features that make your new Belkin N Wireless Modem Router an ideal solution for your home or small office network.

Works w ith Both PCs and Mac® Computers

The Router supports a variety of networking environments including Mac OS® 8.x, 9.x, X v10.x, Linux®, Windows® 98, Me, NT®, 2000, XP, and Vista®. All that is needed is an Internet browser and a network adapter that supports TCP/IP (the standard language of the Internet).

Network Status Display

Lighted LEDs on the front of the Router indicate which functions are in operation. You’ll know at-a-glance whether your Router is connected to the Internet. This feature eliminates the need for advanced soft ware and status-monitoring procedures.

Web-Based Advanced User Interface

You can set up the Router’s advanced functions easily through your web browser, without having to install additional sof tware onto the computer. There are no disks to install or keep track of and, best of all, you can make changes and per form setup functions from any computer on the network quickly and easily.

NAT IP Address Sharing

Your Router employs Network Address Translation (NAT) to share the single IP address assigned to you by your Internet Service Provider while saving the cost of adding additional IP addres ses to your Internet service account.

SPI Firewall

Your Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks including IP Spoofing, Land Attack, Ping of Death (PoD), Denial of Service (DoS), IP with zero length, Smurf Attack, TCP Null Scan, SYN flood, UDP flooding, Tear Drop At tack, ICMP defect, RIP defect, and fragment flooding.

Integrated 10/100 4-Port Switch

The Router has a built-in, four-port network switch to allow your wired computers to share printers, data and MP3 files, digital photos, and much more. The switch features automatic detection so it will adjust to the speed of connected devices. The switch will transfer data between computers and the Internet simultaneously without interrupting or consuming resources.

Universal Plug and Play (UPnP)

UPnP is a technology that offers seamless operation of voice messaging, video messaging, games, and other applications that are UPnP-compliant.

Support for VPN Pass-Through

If you connect to your office network from home using a VPN connection, your Router will allow your VPN-e quipped computer to pass through the Router and to your office network.

N Wirel ess Modem Ro uter

PRODUCT OVERVIEW

SECTIONSTable of Contents 1 3 4 5 6 7 8 9

Built-In Dynamic Host Configuration Protocol (DHCP)

Built-In Dynamic Host Configuration Protocol (DHCP) on-board makes for the easiest possible connection of a network. The DHCP server will assign IP addresses to each computer automatically so there is no need for a complicated net working setup.

Setup Assistant

The Setup Assistant, second generation of Belkin’s renowned Easy Install Wizard, takes the guesswork out of setting up your Router. This automatic software determines your network settings for you and sets up the Router for connection to your Internet Service Provider (ISP). In a matter of minutes, your Router will be up and running on the Internet.

Note: Setup Assistant soft ware is compatible with Windows 2000, XP, and Vista, Mac OS X v10.4 and v10.5. If you are using another operating system, the Router can be set up using the Alternate Setup Method described in this User Manual (see page 27).

Integrated N Wireless Access Point

N MIMO is an exciting new wireless technology based on the draft IEEE

802.11n specification. It employs MIMO (Multiple Input Multiple Output)

smart-antenna technology that achieves data rates of up to 300Mbps.* Actual throughput is typically lower than the connected data rate and will var y depending on your networking environment.

*NOTE: The standard transmission rate—300Mbps—is the physical data rate. Actual data throughput will be lower.

MAC Address Filtering

For added security, you can set up a list of MAC addresses (unique client identifiers) that are allowed access to your network. Ever y computer has its own MAC addre ss. Simply enter these MAC addresses into a list using the Web-Based Advanced User Inter face and you can control access to your network.

N Wirel ess Modem Ro uter

KNOWING YOUR MODEM ROUTER

SECTIONSTable of Contents 1 2 4 5 6 7 8 9

Package Contents

• Belkin N Wireless Modem Router

• Quick Installation Guide

• Belkin Setup Assistant Sof tware CD

• RJ11 Telephone Cord

• RJ45 Ethernet Networking Cable

• ADSL (Asymmetric Digital Subscriber Line) Micro filter*

• Power Supply

• User Manual in CD

• Network Status Display Guide

• Security Guide

*ADSL Micro filter varies by country. If it’s not included, you will need to purchase one

N Wirel ess Modem Ro uter

KNOWING YOUR MODEM ROUTER

SECTIONSTable of Contents 1 2 4 5 6 7 8 9

System Requirements

• An active ADSL service with a telephone wall jack for connecting the Router

• At least one computer with an installed network interface adapter

• TCP/IP networking protocol installed on each computer

• No other DHCP server on your local network assigning IP

addresses to computers and devices

• Internet browser

Setup Assistant Software System Requirements

• A computer running Windows 2000, XP, or Vista; or Mac OS X v10.4 and v10.5

• Minimum 1GHz processor and 512MB RAM

• Internet browser

Internet Connection Settings

The Setup Assistant contains a database of Inter net Service Providers (ISP) in each country to help you set up your Router quickly. If your ISP is not on the list, please collect the following information from your ISP before setting up the Router:

• Internet connection protocol: __ __ __ __ _ (PPPoE, PPPoA, Dynamic IP, Static IP)

• Multiplexing method or Encapsulation: ________ __ (LLC or VC MUX)

• Virtual circuit: VPI (Vir tual Path Identifier) __ __ __ __ __

(a numbe r between 0 and 255)

• VCI (Virtual Channel Identifier) __ __ __ __ __

(a numbe r between 1 and 65535)

• For PPPoE and PPPoA users: ADSL account user name __ __ __ __ __ __ _ and password __ __ __ __ __ __ __ _

• For static IP users: IP Address ___ . ___ . ___ . ___

Subnet Mask _ __ . __ _ . _ __ . __ _

Default Gateway Server __ _ . _ __ . __ _ .

• IP address for Domain Name Server __ _ . _ __ . __ _ . _ __ (If given by your ISP)

N Wirel ess Modem Ro uter

KNOWING YOUR MODEM ROUTER

SECTIONSTable of Contents 1 2 4 5 6 7 8 9

The Router has been designed to be placed on a desktop. All of the cables exit from the rear of the Router for better organization and utility. The Network Status Display is easily visible on the FRONT of the Router to provide you with information about network activity and status. See the Net work Status Display Guide for more detailed information.

1. Security

OFF Wireless security is OFF

Solid Blue Wireless security is ON

Flashing Blue WPS sync is in progress

2. Wireless-Computer Status

OFF Wireless computer is not present

Solid Blue

Blinking Amber

3. Wired-Computer Status

OFF Wired computer is not present

Solid Blue

Blinking Amber

Wireless computer is connected to the Router

Problem with wireless computer connecting properly to the Router

Wired computer is connected to the Router

Problem with wired computer connecting to the Router currently

N Wirel ess Modem Ro uter

KNOWING YOUR MODEM ROUTER

SECTIONSTable of Contents 1 2 4 5 6 7 8 9

4. Router/Power Status

When you apply power to the Router or restar t it, a shor t period of time elapse s while the Router boots up. During this time, the “router” icon blinks. When the Router has completely booted up, the “router” icon becomes a solid light, indicating the Router is ready for use.

OFF Router is off

Blinking Blue Router is booting up

Solid Blue Router is on and ready

5. ADSL Line Status

This icon lights in blue to indicate that your Router is connected properly to the ADSL. It turns amber when problem is detected.

OFF

Blinking Blue

Solid Blue

Blinking Amber Problem with ADSL line

Router is NOT connected to a functioning ADSL line

Router is attempting to connect to the ADSL line

Router is connected to an ADSL service and is functioning prope rly

6. Internet Status

OFF

Blinking Blue

Solid Blue

Blinking Amber

This unique icon shows you whe n the Router is connected to the Internet. When the light is off, the Router is NOT connected to the Internet. When the light is blinking amber, the Router is attempting to connect to the Internet. When the light is solid blue, the Router is connected to the Internet. When using the “Disconnect after x minutes” feature, this icon becomes extremely useful in monitoring the status of your Router’s connection.

7. WPS Push Button

This button is for the Wi-Fi Protecte d Setup™ feature. Refer to the “Changing the Wireless Security Settings” section for more details.

Router is NOT connected to the Internet

Router is attempting to connect to the Internet

Router is connected to the Internet

Router is not connected to the Internet

N Wirel ess Modem Ro uter

KNOWING YOUR MODEM ROUTER

SECTIONSTable of Contents 1 2 4 5 6 7 8 9

8. Connection to ADSL – Gray

This port is for connection to your ADSL. Conne ct your ADSL to this port. An RJ11 telephone cord is provided in the package.

9. Connections to Wired Computers – Ye llow

Connect your wired (non-wireless) computers to these por ts. These ports are RJ45, 10/100 auto-negotiation, auto-uplinking ports for standard UTP category 5 or 6 Ethernet cable. The por ts are labeled 1 through 4, with onboard LEDs on the connectors.

10. Reset Button

The “Reset” button is used in rare cases when the Router may function improperly. Resetting the Router will restore the Router’s normal operation while maintaining the programmed settings. You can also restore the factory default settings by using the “Reset ” button. Use the restore option in instances where you may have forgot ten your custom password.

i. Resetting the Router

Push and release the “Reset ” button. The lights on the Router will

momentarily flash. The “Router” light will begin to blink. When the “Router” light becomes solid again, the reset is complete.

ii. Restoring the Factory Defaults Press and hold the “Reset” button for at least 10 seconds, then

release it. The lights on the Router will momentarily flash. The “Router” light will begin to blink. When the “Router” light becomes solid again, the restore is complete.

11. Power Jack – Black

Connect the included 15V/0.8A DC power supply to this jack.

N Wirel ess Modem Ro uter

CONNECTING AND CONFIGURING YOUR MODEM ROUTER

SECTIONSTable of Contents 1 2 3 5 6 7 8 9

Verify the contents of your box. You should have the following:

• Belkin N Wireless Modem Router

• RJ11 Telephone Cord

• RJ45 Ethernet Networking Cable

• Power Supply

• Belkin Setup Assistant Sof tware CD

• User Manual on CD

• Micro Filter (if your ISP line requires)

• Quick Installation Guide

• Security Guide

• Network Status Display Guide

Setup Assistant

Belkin has provided our Setup Assistant software to make installing your Router a simple and easy task. You can use it to get your Router up and running in minutes. The Setup Assistant requires that your Windows 2000 or XP computer be connected directly to your ADSL and that the Internet connection is active and working at the time of installation. If it is not, you must use the “Alternate Setup Method” section of this User Manual to configure your Router. Additionally, if you are using an operating system other than Windows 20 00, XP, or Vista, or Mac OS X v10.4 and v10.5, you must set up the Router using the “Alternate Setup Method” section of this User Manual.

N Wirel ess Modem Ro uter

CONNECTING AND CONFIGURING YOUR MODEM ROUTER

SECTIONSTable of Contents 1 2 3 5 6 7 8 9

Step 1: Hardware Connections

1.1 Brand-New Setup

Follow these steps if you are not replacing an existing modem. If you are replacing an existing modem, skip to the next section, “Replacing an Existing Modem or Modem Router”, star ting on page 15.

1. Unpack your new Router from the box and place it nex t to your computer. Raise the Router’s antennas.

2. Retrieve the yellow RJ45 cable that was included with your Router. First, connect one end to any yellow por t labeled “Wired” on the back of your Router. Then, connect the other end to the networking port on the back of your computer.

3. Retrieve the included gray RJ11 phone cord. Connect one end to the gray port labeled “ADSL line” on the back of your Router. Then connect the other end to your ADSL connection (either a wall jack or an ADSL splitter).

N Wirel ess Modem Ro uter

Note: Some ADSL connections require a micro filter. Your ADSL provider

can tell you if you need one. Belkin includes a micro filter in regions known to use them. You may or may not have received one in your box.

4. Plug your Router’s power supply into the black port labeled “Power” on the back of your Router.

5. Wait 20 seconds for the Router to star t up. Look at the display on the front of the Router. Make sure the “Wired” and “Route r” icons are lit up in blue. If they are not, recheck your connections.

CONNECTING AND CONFIGURING YOUR MODEM ROUTER

LANADSL

SECTIONSTable of Contents 1 2 3 5 6 7 8 9

1.2 Replacing an Existing Modem or Modem Router

Follow these steps if you currently have a modem or a modem router that you will be replacing with your new Router.

Important: Please unplug the power adapter of your old modem from your wall outlet first.

1. Unpack your new Router from the box and place it next to

your old modem. Raise the Router’s antennas. Unplug your old modem’s power cord.

2. Locate the cable that connects your old modem to your computer. Unplug that cable from your old modem, and plug it into any yellow port labeled “Wired” on the back of your new Router.

N Wirel ess Modem Ro uter

3. Locate the cable that connects your old modem to the ADSL wall

jack. Unplug it from your old modem and then connect it to the gray port labeled “ADSL line” on the back of your Router.

4. Plug your Router’s power supply into the black port labeled “Power” on the back of your Router.

5. Wait 20 seconds for the Router to star t up. Look at the display on the front of the Router. Make sure the “Wired” and “Route r” icons are lit in blue. If they are not, recheck your connections.

CONNECTING AND CONFIGURING YOUR MODEM ROUTER

SECTIONSTable of Contents 1 2 3 5 6 7 8 9

Step 2: Set Up the Router – Run the Setup Assistant Software

1. Shut down any programs that are running on your computer

at this time.

Turn off any firewall or Internet-connection-sharing software on your computer.

2. Insert the CD into your computer. The Setup Assistant will automatically appear on your computer’s screen within 15 seconds. Click on “Setup Assistant” to run the Setup Assistant. Follow the instructions there.

Note for Windows Users: If the Setup Assistant does not start up automatically, select your CD -ROM drive from “My Computer” and double-click on the file named “SetupAssistant” to star t the Setup Assistant.

IMPORTANT: Run the Setup Assistant from the computer that is

directly connected to the Router from Step 1.1B.

Select Countr y

Select your country from the drop -down box. Click “Begin” to continue.

N Wirel ess Modem Ro uter

CONNECTING AND CONFIGURING YOUR MODEM ROUTER

SECTIONSTable of Contents 1 2 3 5 6 7 8 9

Confirmation Screen

Verify that you have completed all QIG steps by checking the box to the right of the arrow. Click “Next” to continue.

Progress Screen

Setup Assistant will show you a progress screen each time a step in the setup has been completed.

N Wirel ess Modem Ro uter

CONNECTING AND CONFIGURING YOUR MODEM ROUTER

SECTIONSTable of Contents 1 2 3 5 6 7 8 9

2.1 Checking Settings

The Setup Assistant will now examine your computer’s network settings and gather information needed to complete the Router’s conne ction to the Internet.

2.2 Verifying Hardware Connections

The Setup Assistant will now verify your hardware connection.

N Wirel ess Modem Ro uter

CONNECTING AND CONFIGURING YOUR MODEM ROUTER

SECTIONSTable of Contents 1 2 3 5 6 7 8 9

2.3 Naming your Wireless Network

The Setup Assistant will display the default wireless network name or Service Set Identifier (SSID). This is the name of your wireless network to which your computers or devices with wireless network adapter s will connect. You can either use the default or change it to something unique. Write down this name for future reference.

If the Router is capable of “High Speed Mode”, this option will be checked. You can turn off this option later using the Bandwidth Switch described in this User Manual (see page 44). Click “Next” to continue.

2.4 Requesting Internet Account Info (if needed)

Select your ISP from the drop-down boxes.

N Wirel ess Modem Ro uter

CONNECTING AND CONFIGURING YOUR MODEM ROUTER

SECTIONSTable of Contents 1 2 3 5 6 7 8 9

If your Internet account requires a login and password, you will be prompted with a screen similar to the illustration below. Click “Next” to continue.

2.5 Configuring the Router

The Setup Assistant will now configure your Router by sending data to the Router and restarting it. Wait for the on-screen instructions.

Note: Do not disconnect any cable or power off the Router while the Router is rebooting. Doing so will render your Router inoperable.

N Wirel ess Modem Ro uter

CONNECTING AND CONFIGURING YOUR MODEM ROUTER

SECTIONSTable of Contents 1 2 3 5 6 7 8 9

2.6 Checking Internet Connection

We are almost done. The Setup Assistant will now check your connection to the Internet.

Congratulations

You have finished installing your new Belkin Router. You will see the Congratulations screen when your Router can connect to the Internet. You can begin surfing by opening your browser and going to any website.

You can use the Setup Assistant to set up your other wired and wireless computers to connect to the Internet by clicking “Next”. If you decide to add computers to your Router later, select “Finish— return to Main Menu” and then click “Next”.

N Wirel ess Modem Ro uter

CONNECTING AND CONFIGURING YOUR MODEM ROUTER

SECTIONSTable of Contents 1 2 3 5 6 7 8 9

Troubleshooting

If the Setup As sistant is not able to connect to the Internet, you will see the following screen. Follow the on-screen instructions to go through the troubleshooting steps.

2.7 Optional: Assistance Connecting Other Computers

This optional step will help you to connect additional wired and wireless computers to your network. Follow the on-screen instructions.

N Wirel ess Modem Ro uter

CONNECTING AND CONFIGURING YOUR MODEM ROUTER

SECTIONSTable of Contents 1 2 3 5 6 7 8 9

Once you have verified that your other wired and wireless computers are properly connected, your network is set up and working. You can now surf the Internet. Click “Next” to return to the main menu.

Step 3: Set Up Wireless Security – Run the Security Assistant Software

Now that your network is set up and working, it is re commended that you turn on wireless security to prevent unauthorized access to your network from neighboring wireless-enabled computers. The Security Assistant will guide you through the process. Click “Security Assistant” and follow the on-scre en instructions.

IMPORTANT: Run the Setup Assistant from the computer that is

directly connected to the Router from Steps 1.1B and 1.2B.

N Wirel ess Modem Ro uter

CONNECTING AND CONFIGURING YOUR MODEM ROUTER

SECTIONSTable of Contents 1 2 3 5 6 7 8 9

Progress Screen

The Security Assistant will show you a progress screen each time a step has been completed.

3.1 Picking the Security Type

Select the security type for your wireless network and click “Next” to continue.

N Wirel ess Modem Ro uter

CONNECTING AND CONFIGURING YOUR MODEM ROUTER

SECTIONSTable of Contents 1 2 3 5 6 7 8 9

3.2 Creating a Network Key

Enter a network key (PSK ) for your wireless network and click “Next” to continue.

3.3 Transferring the Key

After setting up your wireless security, you will have to transfer the network key to each of your wireless computer s. Click on “Transfer Key” if you have a USB flash drive. Follow the on-screen instructions, or click on “Print” to print the information. Manually enter it to each wireless computer. Then, click “Next” to continue.

N Wirel ess Modem Ro uter

CONNECTING AND CONFIGURING YOUR MODEM ROUTER

SECTIONSTable of Contents 1 2 3 5 6 7 8 9

3.4 Verifying the Connection

If all your wireless computers are able to connect to the Router, click “Next”. If you are having trouble, select “I had problem with at least one computer” and click “Next”. Then, follow on-screen instructions.

Congratulations

Once you have verified that your wireless computers are properly connected, your wireless network is set up and secured. You now can run your network wirelessly and se curely. Click “Finish” to take you back to the main menu.

N Wirel ess Modem Ro uter

ALTERNATE SETUP METHOD

SECTIONSTable of Contents 1 2 3 4 6 7 8 9

Step 1: Hardware Connections – Follow the Quick Installation Guide

See the QIG or Step 1: Hardware Connections from the previous section.

Step 2: Set your Computer’s Network Settings to Work with a DHCP Server

See the section in this User Manual called “Manually Configuring Network Settings” for directions.

Step 3: Configuring the Router Using the Web-Based Advanced User Interface

Using your Internet browser, you can access the Router’s Web-Based Advance d User Interface. In your browser, type “192.168.2.1” (do not type in anything else such as “http://” or “w ww”). Then press the “Enter” key.

N Wirel ess Modem Ro uter

ALTERNATE SETUP METHOD

SECTIONSTable of Contents 1 2 3 4 6 7 8 9

Logging into the Router

You will see the Router’s home page in your browser window. The home page is visible to any user who wants to see it. To make any change s to the Router’s settings, you have to log in. Clicking the “Login” button or clicking on any one of the links on the home page will take you to the login screen. The Router ships with no password entered. In the login screen, leave the password blank and click the “Submit” but ton to log in.

Logging out of the Router

One computer at a time can log into the Router for the purposes of making changes to the settings of the Router. Once a user has logged in to make changes, there are two ways that the computer can be logged out. Clicking the “Logout” button will log the computer out. The second method is automatic. The login will time out after a specified period of time. The default login time-out is 10 minutes. This can be changed from one to 99 minute s. For more information, see the section in this manual titled “Changing the Login Time-Out Setting”.

N Wirel ess Modem Ro uter

+ 70 hidden pages