Belkin F5D8235V3 User Manual
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc1
Page 1 of 120
N+ Wireless Router
User Manual
F5D8235-4 V3
PM00736-A
Splash Screen
Table of Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x
Advantages of a Wireless Network…………………………..x
Placement of your N+ Wireless Router. . . . . . . . . . . . . .x
2 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x
Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x
3 Knowing your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xx
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xx
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xx
Setup Assistant Software System Requirements . . . . . .xx
4 Connecting and Configuring your Router . . . . . . . . . . . . . . .xx
5 Alternate Setup Method . . . . . . . . . . . . . . . . . . . . . . . . . . .xx
6 Using the Web-Based Advanced User Interface . . . . . . . . . .xx
Changing LAN Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .xx
Viewing the DHCP Client List Page . . . . . . . . . . . . . . . . . xx
Configuring the Wireless Network Settings . . . . . . . . . . . xx
Setting WPA Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xx
Setting WEP Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xx
Using the Access Point Mode . . . . . . . . . . . . . . . . . . . . . .xx
Access Control . . . . . . . . . . . . . . . . . . . . . .xx
Configuring the Firewall . . . . . . . . . . . . . . . . . . . . . . . . . . xx
Using Dynamic DNS……………………………………….xx
Utilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xx
Restarting the Router . . . . . . . . . . . . . . . . . . . . . . . . . xx
Updating the Firmware . . . . . . . . . . . . . . . . . . . . . . . . xx
7 Manually Configuring Network Settings . . . . . . .xx
8 Recommended Web Browser Settings . . . . . . . . . . . . . . . . .xx
9 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xx
10 Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xx
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc
Page 2 of 120
Introduction
Thank you for purchasing the Belkin N+ Wireless Router (the Router). Following
are two short sections—the first discusses the benefits of home networking, and
the other outlines best practices that maximize your wireless home network
range and performance. Please be sure to read through this User Manual
completely, and pay special attention to the section entitled “Placement of your
Wireless Networking Hardware for Optimal Performance” on the next page. By
following our simple setup instructions you will be able to use your Belkin Home
Network to:
• Share one high-speed Internet connection with all the computers in your
home
• Share a USB storage device (not included) within your network
• Share documents, music, video, and digital pictures
• Store, retrieve, and copy files from one computer to another
• Simultaneously play games online, check Internet email, and chat
Advantages of a Wireless Network
Here are some of the advantages of setting up a Belkin Wireless Network:
• Mobility – you’ll no longer need a dedicated “computer room”—now you
can work on a networked laptop or desktop computer anywhere within
your wireless range
• Easy installation – Belkin’s Easy Installation Wizard makes setup simple
• Flexibility – set up and access printers, computers, and other networking
devices from anywhere in your home
• Easy Expansion – the wide range of Belkin networking products let you
expand your network to include devices such as printers and gaming
consoles
• No cabling required – you can spare the expense and hassle of retrofitting
Ethernet cabling throughout the home or office
• Widespread industry acceptance – choose from a wide range of
interoperable networking products.
(This section is copied from P74304-C Introduction)
Revolutionary N+ Wireless Technology with MIMO (N MIMO)
Your Belkin N+ Wireless Router uses a new smart-antenna technology called Multiple Input
Multiple Output (MIMO). N MIMO complies with the IEEE draft 802.11n specification. It increases
speed, range, reliability, and spectral efficiency for wireless networking systems.
The element that makes Belkin’s N MIMO technology different from a conventional radio is the
use of multiple antennas and two simultaneous data streams to deliver wireless transfers around
your home or office. A conventional radio uses one antenna to transmit a data stream. Belkin’s N
MIMO, on the other hand, uses two antennas. This design helps combat distortion and
interference. Belkin’s N MIMO is multidimensional. It builds on one-dimensional smart-antenn a
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc1
Page 3 of 120
technology by simultaneously transmitting two data streams through the same channel, which
increases wireless capacity.
Another element that enhances Belkin’s N MIMO is the use of aggregation as specified in the
draft 802.11n specification. By shortening the space between packets and combining multiple
smaller packets into one larger packet, Belkin’s N MIMO can transmit more data through
available bandwidth.
Think of conventional radio transmission as a two-lane highway. The speed limit governs the
maximum allowable flow of traffic through that lane. Compared with conventional radios, onedimensional smart antenna systems help move traffic through that lane faster and more reliably—
analogous to a four-lane road on which traffic consistently moves at a rate closer to the speed
limit. Belkin’s N MIMO helps traffic move at the speed limit and opens more lanes—to become
the superhighway in this example. The rate of traffic flow is multiplied by the number of lanes that
are opened.
Placement of your N+ Wireless Router
Important Factors for Placement and Setup
Your wireless connection will be stronger the closer your computer is to your
Router. Typical indoor operating range for wireless devices is between 100 and
200 feet.
In the same way, your wireless connection and performance will degrade
somewhat as the distance between your Router and connected devices
increases. This may or may not be noticeable to you. As you move further from
your Router, connection speed may decrease. Factors that can weaken signals
simply by getting in the way of your network’s radio waves are metal appliances
or obstructions, and walls.
If you have concerns about your network’s performance that might be related to
range or obstruction factors, try moving the computer to a position between five
and 10 feet from the Router in order to see if distance is the problem. If
difficulties persist even at close range, please contact Belkin Technical Support.
Note: While some of the items listed below can affect network performance, they
will not prohibit your wireless network from functioning; if you are concerned that
your network is not operating at its maximum effectiveness, this checklist may
help.
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc
Page 4 of 120
1. Router Placement
Place your Router, the central connection point of your network, as close as
possible to the center of your wireless network devices.
To achieve the best wireless network coverage for your “wireless clients” (i.e.,
computers enabled by Belkin Wireless Notebook Network Cards, Wireless
Desktop Network Cards, and Wireless USB Adapters):
• Ensure that your Router’s networking antennas are parallel to each other,
and are positioned vertically (toward the ceiling). If your Router itself is
positioned vertically, point the antennas as much as possible in an upward
direction.
• In multistory homes, place the Router on a floor that is as close to the
center of the home as possible. This may mean placing the Router on an
upper floor.
• Try not to place the Router near a cordless 2.4GHz phone.
2. Avoid Obstacles and Interference
Avoid placing your Router near devices that may emit radio “noise,” such as
microwave ovens. Dense objects that can inhibit wireless communication include:
• Refrigerators
• Washers and/or dryers
• Metal cabinets
• Large aquariums
• Metallic-based UV tinted windows
If your wireless signal seems weak in some spots, make sure that objects such
as these are not blocking the signal’s path (between your computers and Router).
3. Cordless Phones
If the performance of your wireless network is impaired after attending to the
above issues, and you have a cordless phone:
• Try moving cordless phones away from your Router and your wirelessenabled computers.
• Unplug and remove the battery from any cordless phone that operates on
the 2.4GHz band (check manufacturer’s information). If this fixes the
problem, your phone may be interfering.
• If your phone supports channel selection, change the channel on the
phone to the farthest channel from your wireless network. For example,
change the phone to channel 1 and move your Router to channel 11. See
your phone’s user manual for detailed instructions.
• If necessary, consider switching to a 900MHz or 5GHz cordless phone.
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc1
Page 5 of 120
4. Choose the “Quietest” Channel for your Wireless Network
In locations where homes or offices are close together, such as apartment
buildings or office complexes, there may be wireless networks nearby that can
conflict with yours.
Use the Site Survey capabilities found in the Wireless Utility of your wireless
adapter to locate any other wireless networks that are available (see your
wireless adapter’s user manual), and move your Router and computers to a
channel as far away from other networks as possible.
• Experiment with more than one of the available channels, in order to find
the clearest connection and avoid interference from neighboring cordless
phones or other wireless devices.
• For Belkin wireless networking products, use the detailed Site Survey and
wireless channel information included with your wireless network card.
See your network card’s user guide for more information.
These guidelines should allow you to cover the maximum possible area with your
Router. Should you need to cover an even wider area, we suggest the Belkin
Wireless Range Extender/Access Point.
5. Secure Connections, VPNs, and AOL
Secure connections typically require a user name and password, and are used
where security is important. Secure connections include:
• Virtual Private Network (VPN) connections, often used to connect
remotely to an office network
• The “Bring Your Own Access” program from America Online (AOL), which
lets you use AOL through broadband provided by another cable or DSL
service
• Most online banking websites
• Many commercial websites that require a user name and password to
access your account
Secure connections can be interrupted by a computer’s power management
setting, which causes it to “go to sleep.” The simplest solution to avoid this is to
simply reconnect by rerunning the VPN or AOL software, or by re-logging into the
secure website.
A second alternative is to change your computer’s power management settings
so it does not go to sleep; however, this may not be appropriate for portable
computers. To change your power management setting under Windows, see the
“Power Options” item in the Control Panel.
If you continue to have difficulty with Secure Connections, VPNs, and AOL,
please review the steps above to be sure you have addressed these issues.
For more information regarding our networking products, visit our website at
www.belkin.com/networking.
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc
Page 6 of 120
Product Overview
Product Features
In minutes you will be able to share your Internet connection and network your
computers. The following is a list of features that make your new Belkin N+
Wireless Router an ideal solution for your home or small office network.
Works with Both PCs and Mac® Computers
The Router supports a variety of networking environments including Mac OS® 8.x,
9.x, X v10.x, Linux®, Windows® 98, Me, NT®, 2000, XP, Vista™, and others. All
that is needed is an Internet browser and a network adapter that supports TCP/IP
(the standard language of the Internet).
USB Port for External Storage Devices
The Router includes a USB port in the back panel for one storage device (flash
drive or external hard drive). You can now have network-attached storage
capabilities without having to purchase an expensive NAS.
Patent-Pending Network Status Display
Lighted LEDs on the front of the Router indicate which functions are in operation.
You’ll know at-a-glance whether your Router is connected to the Internet. This
feature eliminates the need for advanced software and status-monitoring
procedures.
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc1
Page 7 of 120
Web-Based Advanced User Interface
You can set up the Router’s advanced functions easily through your web browser,
without having to install additional software onto the computer. There are no
disks to install or keep track of and, best of all, you can make changes and
perform setup functions from any computer on the network quickly and easily.
NAT IP Address Sharing
Your Router employs Network Address Translation (NAT) to share the single IP
address assigned to you by your Internet Service Provider while saving the cost
of adding additional IP addresses to your Internet service account.
SPI Firewall
Your Router is equipped with a firewall that will protect your network from a wide
array of common hacker attacks including IP Spoofing, Land Attack, Ping of
Death (PoD), Denial of Service (DoS), IP with zero length, Smurf Attack, TCP
Null Scan, SYN flood, UDP flooding, Tear Drop Attack, ICMP defect, RIP defect,
and fragment flooding.
Integrated 10/100/1000 4-Port Switch
The Router has a built-in, Gigabit Ethernet, four-port network switch to allow your
wired computers to share printers, data and MP3 files, digital photos, and much
more. The switch features automatic detection so it will adjust to the speed of
connected devices. The switch will transfer data between computers and the
Internet simultaneously without interrupting or consuming resources.
Universal Plug and Play (UPnP)
UPnP is a technology that offers seamless operation of voice messaging, video
messaging, games, and other applications that are UPnP-compliant.
Support for VPN Pass-Through
If you connect to your office network from home using a VPN connection, your
Router will allow your VPN-equipped computer to pass through the Router and to
your office network.
Built-In Dynamic Host Configuration Protocol (DHCP)
Built-In Dynamic Host Configuration Protocol (DHCP) on-board makes for the
easiest possible connection of a network. The DHCP server will assign IP
addresses to each computer automatically so there is no need for a complicated
networking setup.
Setup Assistant
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc
Page 8 of 120
The Setup Assistant, second generation of Belkin’s renowned Easy Install
Wizard, takes the guesswork out of setting up your Router. This automatic
software determines your network settings for you and sets up the Router for
connection to your Internet Service Provider (ISP). In a matter of minutes, your
Router will be up and running on the Internet.
Note: Setup Assistant software is compatible with Windows 2000, XP, and Vista;
and Mac OS X v10.x. If you are using another operating system, the Router can
be set up using the Alternate Setup Method described in this User Manual (see
page xx) [VERIFY PAGE NUMBER].
Integrated N+ Wireless Access Point
N MIMO is an exciting new wireless technology based on the draft IEEE 802.11n
specification. It employs MIMO (Multiple Input Multiple Output) smart-antenna
technology that achieves data rates of up to 300Mbps.* Actual throughput is
typically lower than the connected data rate and will vary depending on your
networking environment.
*NOTE: The standard transmission rate—300Mbps—is the physical data rate.
Actual data throughput will be lower.
MAC Address Filtering
For added security, you can set up a list of MAC addresses (unique client
identifiers) that are allowed access to your network. Every computer has its own
MAC address. Simply enter these MAC addresses into a list using the WebBased Advanced User Interface and you can control access to your network.
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc1
Page 9 of 120
Knowing your Router
Package Contents
• Belkin N+ Wireless Router
• Quick Installation Guide
• Belkin Setup Assistant Software CD
• RJ45 Ethernet Networking Cable
• Power Supply
• User Manual on the Setup Assistant CD
• Network Status Display Guide
• Wireless Security Setup Guide
System Requirements
• Broadband Internet connection such as a cable or DSL modem with RJ45
(Ethernet) connection
• At least one computer with an installed network interface adapter
• TCP/IP networking protocol installed on each computer
• RJ45 Ethernet networking cable
• Internet browser
Setup Assistant Software System Requirements (including Storage
Manager)
• A computer running Windows® 2000, XP, or Vista®; or Mac OS® X v10.x
• Minimum 1GHz processor and 128MB RAM
• Internet browser
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc
Page 10 of 120
Knowing your Router
The Router has been designed to be placed on a desktop. All of the cables exit
from the rear of the Router for better organization and utility. The Network Status
Display is easily visible on the FRONT of the Router to provide you with
information about network activity and status. See the Network Status Display
Guide for more detailed information.
[Replace with “final” N+ Wireless Router Network Status Display line art with A to J line up with
LEDs]
[Note, Please update with F5D8235-4 V3 LED artwork, which has slightly different icons]
A. Broadband Download Speedometer
These lights will display a graphic representation of the current download speed
being transferred through the Internet connection. The speed will be measured
on the speedometer against the fastest speed that has been measured by the N+
since being activated.
B. Wireless Security [insert Lock Icon]
Off Wireless security is off
Blinking Blue WPS handshaking in process
Solid Blue Wireless security is on
C. WPS Push Button (insert the security lock icon)
This button is set aside for the Wi-Fi Protected Setup feature. Refer to the
“Changing the Wireless Security Settings” section for more details.
D. Wireless-Computer Status [insert Laptop Icon]
Off Wireless computer is not present
Solid Blue Wireless computer is connected to the Router
Blinking
Amber
E. Wired-Computer Status [Computer Icon]
Off Wired computer is not present
Solid Blue Wired computer is connected to the Rout er
Blinking
Amber
F. USB Port Status [USB Icon]
Off No device is plugged into the USB port
Flashing Blue Data is being read/written to the storage device
Flashing Amber Unsupported device is plugged into the USB port
Problem with wireless computer connecting properly to the Router
Problem with wired computer connecting properly to the Router
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc1
Page 11 of 120
Solid Blue Storage device is plugged in and ready to be accessed
G. Router/Power Status [insert Router Icon]
When you apply power to the Router or restart it, a short period of time elapses while
the Router boots up. During this time, the “router” icon blinks. When the Router has
completely booted up, the “router” icon becomes a solid light, indicating the Router is
ready for use.
Off Router is off
Blinking Blue Router is booting up
Solid Blue Router is on and ready
H. Wireless Status [insert Wireless Wave Icon over the Router]
Off Wireless is off
Solid Blue Wireless is on
I. Modem Status [insert modem Icon]
This icon lights in blue to indicate that your Router is connected properly to the modem.
It turns amber when a problem is detected.
Off Router is NOT connected to modem
Solid Blue Router is connected to modem and functioning properly
Blinking
Amber
J. Internet Status [insert Globe Icon]
This unique icon shows you when the Router is connected to the Internet. When the
light is off, the Router is NOT connected to the Internet. When the light is blinking
amber, the Router is attempting to connect to the Internet. When the light is solid blue,
the Router is connected to the Internet. When using the “Disconnect after x minutes”
feature, this icon becomes extremely useful in monitoring the status of your Router’s
connection.
Off Router is NOT connected to the Internet
Blinking Blue Router is attempting to connect to the Internet
Solid Blue Router is connected to the Internet
Problem with modem
Blinking
Amber
Problem with connecting to the Internet
[insert “final” N+ Wireless Router rear-panel line art with K to O line up to the ports]
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc
Page 12 of 120
K. Connections to Wired Computers (insert N+ Wireless Router Wired
Computer icon) – Gray
Connect your wired (non-wireless) computers to these ports. These ports are
RJ45, 10/100/1000 auto-negotiation, auto-uplinking ports for standard UTP
category 5 or 6 Ethernet cable. The ports are labeled 1 through 4.
L. USB Port
Plug in your USB storage device here.
M. Connection to Modem (insert N+ Wireless Router Modem icon) – Yellow
This port is for connection to your cable or DSL modem. Use the cable that was
provided with the modem to connect the modem to this port. Use of a cable other
than the one supplied with the cable modem may not work properly.
N. Reset Button
The “Reset” button is used in rare cases when the Router may function
improperly. Resetting the Router will restore the Router’s normal operation while
maintaining the programmed settings. You can also restore the factory default
settings by using the “Reset” button. Use the restore option in instances where
you may have forgotten your custom password.
i. Resetting the Router
Push and release the “Reset” button. The lights on the Router will
momentarily flash. The “Power/Ready” light will begin to blink. When
the “Power/Ready” light becomes solid again, the reset is complete.
ii. Restoring the Factory Defaults
Press and hold the “Reset” button for at least 10 seconds, then
release it. The lights on the Router will momentarily flash. The
“Power/Ready” light will begin to blink. When the “Power/Ready”
light becomes solid again, the restore is complete.
O. Power Jack – Black
Connect the included 12V/1.5A DC power supply to this jack.
---------------------------------------------------------------------------------------------
Connecting and Configuring your Router
Verify the contents of your box. You should have the following:
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc1
Page 13 of 120
• Belkin N+ Wireless Router
• RJ45 Ethernet Networking Cable
• Power Supply
• Belkin Setup Assistant Software CD
• User Manual on the Setup Assistant CD
• Network Status Display Guide
• Wireless Security Setup Guide
Modem Requirements
Your cable or DSL modem must be equipped with an RJ45 Ethernet port. Many
modems have both an RJ45 Ethernet port and a USB connection. If you have a
modem with both Ethernet and USB, and are using the USB connection at this
time, you will be instructed to use the RJ45 Ethernet port during the installation
procedure. If your modem has only a USB port, you can request a different type
of modem from your ISP, or you can, in some cases, purchase a modem that has
an RJ45 Ethernet port on it.
Ethernet USB
Setup Assistant
Belkin has provided our Setup Assistant software to make installing your Router
a simple and easy task. You can use it to get your Router up and running in
minutes. The Setup Assistant requires that your computer be connected directly
to your cable or DSL modem and that the Internet connection is active and
working at the time of installation. If it is not, you must use the “Alternate Setup
Method” section of this User Manual to configure your Router. Additionally, if you
are using an operating system other than Windows 2000, XP, or Vista, or Mac
OS X v10.x, you must set up the Router using the “Alternate Setup Method”
section of this User Manual.
[Please update from the final N+ QIG, PM00737]
Step 1: Hardware Connections – Follow the Quick Installation Guide (QIG)
[Insert line art from the QIG]
1. Find the cable connecting your modem and computer*. Unplug it from the
computer and plug it into the yellow port on the Belkin Router.
2. Connect the new cable (provided in the box) to any gray port on the
Router. Plug the other end into a network (Ethernet) port on your
computer.
[use existing lineart]
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc
Page 14 of 120
3. Plug the power supply into a wall outlet, and the other end into the black
port on the Belkin Router. As the Router wakes up, lights will come on;
recheck your connections if the “Wired” and “Router” lights are not a
steady blue after 20 seconds.
4. Rotate the antennas up.
5. Locate the CD in this guide and insert it into your computer. The Setup
Wizard should appear automatically. If it doesn’t, open the CD in My
Computer (Windows) or the Finder (Mac OS X) and double-click the
“Router Setup” icon.
*If you are replacing an existing router, find the cable connecting the modem and
old router. Disconnect it from the old router and plug it into the yellow port on the
new router.
Step 2: Set Up the Router – Run the Setup Assistant Software
A. Shut down any programs that are running on your computer at this time.
Turn off any firewall or Internet-connection-sharing software on your computer.
B. Insert the CD into your computer. The Setup Assistant will automatically
appear on your computer’s screen within 15 seconds. Click on “Go” to run the
Setup Assistant. Follow the instructions there.
IMPORTANT: Run the Setup Assistant from the computer that is directly connected to the Router from
Step 1 – B.
[Keep existing screenshots for Step2]
<Insert: EZI_1.tif>
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc1
Page 15 of 120
Note for Windows Users: If the Setup Assistant does not start up automatically,
select your CD-ROM drive from “My Computer” and double-click on the file
named “SetupAssistant” to start the Setup Assistant.
Select Country
Select your country from the drop-down box. Click “Begin” to continue.
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc
Page 16 of 120
[Note from PM: Please modify the left hand menu in the following EZI
screenshots below to match the left hand menu in the screen shot above.]
Confirmation Screen
Verify that you have completed all QIG steps by checking the box to the right of
the arrow. Click “Next” to continue.
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc1
Page 17 of 120
Progress Screen
Setup Assistant will show you a progress screen each time a step in the setup
has been completed.
<Insert: EZI_4.tif>
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc
Page 18 of 120
1.1 Checking Settings
The Setup Assistant will now examine your computer’s network settings and
gather information needed to complete the Router’s connection to the Internet.
1.2 Verifying Hardware Connections
The Setup Assistant will now verify your hardware connection.
[insert EZI_5.tif]
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc1
Page 19 of 120
1.3 Naming your Wireless Network
The Setup Assistant will display the default wireless network name or Service Set
Identifier (SSID). This is the name of your wireless network to which your
computers or devices with wireless network adapters will connect. You can either
use the default or change it to something unique. Write down this name for future
reference. Click “Next” to continue.
[insert EZI_7.tif]
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc
Page 20 of 120
[in screenshot above, the “r” in router should be capitalized in “Belkin
routers”]
1.4 Requesting Internet Account Info (if needed)
If your Internet account requires a login and password, you will be prompted with
a screen similar to the illustration below. Select your country or ISP from the
drop-down boxes.
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc1
Page 21 of 120
[insert EZI_9.tif]
[text in screenshot above should say, “The Router needs a bit more information
in order to be able to connect to the Internet. When you tell us who provides your
service, we can configure most of it:”; also header should read “Internet account
info”—note the sentence casing to remain consistent with the prev. headers]
[insert EZI_9b.tif & EZI_9c.tif]
1.5 Configuring the Router
The Setup Assistant will now configure your Router by sending data to the
Router and restarting it. Wait for the on-screen instructions.
Note: Do not disconnect any cable or power off the Router while the Router is
rebooting. Doing so will render your Router inoperable.
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc
Page 22 of 120
[insert EZI_11.tif]
1.6 Checking Internet Connection
We are almost done. The Setup Assistant will now check your connection to the
Internet.
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc1
Page 23 of 120
[insert EZI_16.tif]
Congratulations
You have finished installing your new Belkin Router. You will see the
Congratulations screen when your Router can connect to the Internet. You can
begin surfing by opening your browser and going to any website.
You can use the Setup Assistant to set up your other wired and wireless
computers to connect to the Internet by clicking “Next”. If you decide to add
computers to your Router later, select “Exit the Assistant” and then click “Next”.
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc
Page 24 of 120
[insert EZI_done.tif]
[header in screenshot above should say: Congratulations—Your Router is
set up]
Troubleshooting
If the Setup Assistant is not able to connect to the Internet, you will see the
following screen. Follow the on-screen instructions to go through the
troubleshooting steps.
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc1
Page 25 of 120
[insert EZI_17.tif]
1.7 Optional: Assistance Connecting Other Computers
This optional step will help you to connect additional wired and wireless
computers to your network. Follow the on-screen instructions.
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc
Page 26 of 120
[insert EZI_Opt_1.tif]
[text below header in screenshot below should read:
At this point, your Router is set up and working properly. It is now time to connect
your other computers.
Connecting computers wirelessly
Computers with wireless network adapters can use this network. If you still need
to install those adapters, do this now. Then follow their instructions on how to
connect. When you do so, look for your network: John’s Home Wi-Fi.
Connecting computers with wired cables
Computers with wired network adapters can use this network. If you still need to
install those adapters, do this now. Then simply connect an Ethernet cable
between your computer’s network port and one of the available LAN ports
(labeled “connections to computers”) on the back of this Router.]
Congratulations
Once you have verified that your other wired and wireless computers are
properly connected, your network is set up and working. You can now surf the
Internet. Click “Next” to take you back to the main menu.
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc1
Page 27 of 120
[insert EZI_Opt_Done.tif]
Storage Manager
The Storage Manager is an application that provides easy access to your USB
storage device. Once this is installed, your storage device will appear as a drive
letter (e.g., D:\) in your “My Computer” folder. You may read and write to this
drive as if it were directly attached to your computer. Note that the Router
currently supports FAT, FAT32, and NTFS file systems.
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc
Page 28 of 120
Click “Next” to install the Storage Manager application.
Click “Finish” to go back to the main menu. You may now access the drive as if it
were directly attached to your computer. Once installed, please use the CD to
install this application on all computers on which you wish to access the storage
device.
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc1
Page 29 of 120
Storage Manager also allows you to safely eject the storage device before
unplugging it from your Router. This is recommended before unplugging the USB
storage device as there might be another user on your network who is accessing
the drive. Simply right-click on the “Storage Manager” icon in the system tray and
select the appropriate button.
Alternatively, you do not need to install the Storage Manager in order to access
your storage device. Open a file explorer window and type in the address field:
\\192.168.2.1\DeviceName
where “DeviceName” is the name that was assigned to the storage device.
Your Belkin N+ Wireless Modem Router supports up to four USB storage devices
through a separate USB hub (not included). Note that the Router can supply a
maximum of 500mA of current to the port, so it is recommended that the hub be
externally powered. Additionally, some USB hard drives require more than
500mA and must be externally powered to function.
Alternate Setup Method
Step 1: Hardware Connections – Follow the Quick Installation Guide
See the QIG or Step 1: Hardware Connections from the previous section.
Step 2: Set your Computer’s Network Settings to Work with a DHCP Server
See the section in this User Manual called “Manually Configuring Network
Settings” for directions.
Step 3: Configuring the Router Using the Web-Based Advanced User
Interface
Using your Internet browser, you can access the Router’s Web-Based Advanced
User Interface. In your browser, type “192.168.2.1” (do not type in anything else
such as “http://” or “www”). Then press the “Enter” key.
[use existing tif]
Logging into the Router
You will see the Router’s home page in your browser window. The home page is
visible to any user who wants to see it. To make any changes to the Router’s
settings, you have to log in. Clicking the “Login” button or clicking on any one of
the links on the home page will take you to the login screen. The Router ships
with no password entered. In the login screen, leave the password blank and
click the “Submit” button to log in.
PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc
Page 30 of 120
Loading...