Belkin F5D8235-4B User Manual

USING THE WEB-BASED ADVANCED USER INTERFACE

SECTIONSTable of Con tent s 1 2 3 4 5 7 8 9 106

Updating the Firmware

From time to time, Belkin may release new versions of the Router’s firmware. Firmware updates contain feature improvements and fixes to problems that may have existed. When Belkin releases new firmware, you can download the firmware from the Belkin update website and update your Router’s firmware to the latest version.

N+ Wire less Router

Checking for a New Version of Firmware

The “Check Firmware” (1) button allows you to instantly check for a new version of firmware. When you click the button, a new browser window will appear informing you that either no new firmware is available or that there is a new version available. If a new version is available, you will have the option to download it.

(1)

USING THE WEB-BASED ADVANCED USER INTERFACE

SECTIONSTable of Con tent s 1 2 3 4 5 7 8 9 106

Downloading a New Version of Firmware

If you click the “Check Firmware” button and a new version of firmware is available, you will see a screen similar to the one on the right:

N+ Wire less Router

1. To download the new version of firmware, click “Download”.

2. A window will open that allows you to select the location where you

want to save the firmware file. Select a location. You can name the file anything you want, or use the default name. Be sure to locate the file in a place where you can locate it yourself later. When you have selected the location, click “Save”.

3. When the save is complete, you will see the following window. Click “Close”.

The download of the firmware is complete. To update the firmware, follow the next steps in “Updating the Router’s Firmware”.

USING THE WEB-BASED ADVANCED USER INTERFACE

SECTIONSTable of Con tent s 1 2 3 4 5 7 8 9 106

Updating the Router’s Firmware

1. In the “Firmware Update” page, click “Browse”. A window will open

that allows you to select the location of the firmware update file.

N+ Wire less Router

2. Browse to the firmware file you downloaded. Select the file by

double-clicking on the file name.

3. The “Update Firmware” box will now display the location and name of the firmware file you just selected. Click “Update”.

USING THE WEB-BASED ADVANCED USER INTERFACE

SECTIONSTable of Con tent s 1 2 3 4 5 7 8 9 106

4. You will be asked if you are sure you want to continue. Click “OK”.

5. You will see one more message. This message tells you that the

Router may not respond for as long as one minute as the firmware is loaded into the Router and the Router is rebooted. Click “OK”.

N+ Wire less Router

6. A 60-second countdown will appear on the screen. When the

countdown reaches zero, the Router firmware update will be complete. The Router home page should appear automatically. If not, type in the Router’s address (default = 192.168.2.1) into the navigation bar of your browser.

USING THE WEB-BASED ADVANCED USER INTERFACE

SECTIONSTable of Con tent s 1 2 3 4 5 7 8 9 106

Changing System Settings

The “System Settings” page is where you can enter a new administrator password, set the time zone, or enable remote management.

Setting or Changing the Administrator Password

The Router ships with NO password entered. If you wish to add a password for greater security, you can set a password here. Write down your password and keep it in a safe place, as you will need it if you need to log into the Router in the future. It is also recommended that you set a password if you plan to use the remote management feature of your Router.

Changing the Login Time-Out Setting

The login time-out option allows you to set the period of time that you can be logged into the Router’s advanced setup interface. The timer starts when there has been no activity. For example, imagine you have made some changes in the advanced setup interface, then left your computer alone without clicking “Logout”. Assuming the time-out is set to 10 minutes, 10 minutes after you leave, the login session will expire. You will have to log into the Router again to make any more changes. The login time-out option is for security purposes and the default is set to 10 minutes. Note: Only one computer can be logged into the Router’s advanced setup interface at one time.

N+ Wire less Router

Setting the Time and Time Zone

The Router keeps time by connecting to a Simple Network Time Protocol (SNTP) server. This allows the Router to synchronize the system clock to the global Internet. The synchronized clock in the Router is used to record the security log and control client filtering. Select the time zone that you reside in. You have the option to select a primary and a backup NTP server to keep your Router’s clock synchronized. Select your desired NPT server from the drop-down box, or simply keep it as is.

If you reside in an area that observes daylight saving, then place a check mark in the box next to “Enable Daylight Saving”. The system clock may not update immediately. Allow at least 15 minutes for the Router to contact the time servers on the Internet and get a response. You cannot set the clock yourself.

USING THE WEB-BASED ADVANCED USER INTERFACE

SECTIONSTable of Con tent s 1 2 3 4 5 7 8 9 106

Enab ling Remote Man agement Before you enable this advanced feature of your Belkin Router, MAKE

SURE YOU HAVE S ET THE ADMINISTRATOR PASSWORD. Remote

management allows you to make changes to your Router’s settings from anywhere on the Internet. There are two methods of remotely managing the Router. The first is to allow access to the Router from anywhere on the Internet by selecting “Any IP address can remotely manage the Router”. By typing in your WAN IP address from any computer on the Internet, you will be presented with a login screen where you need to type in the password of your Router.

The second method is to allow a specific IP address only to remotely manage the Router. This is more secure, but less convenient. To use this method, enter the IP address you know you will be accessing the Router from in the space provided and select “Only this IP address can remotely manage the Router”. Before you enable this function, it is STRONGLY RECOMMENDED that you set your administrator password. Leaving the password empty will potentially open your Router to intrusion.

Advanced Feature: The “Remote Access Port” option allows you to configure the desired “Remote Access Port for Remote Management” feature. The default access port is set to port 80.

N+ Wire less Router

Enabling/Disabling UPnP

UPnP (Universal Plug-and-Play) is yet another advanced feature offered by your Belkin Router. It is a technology that offers seamless operation of voice messaging, video messaging, games, and other applications that are UPnP-compliant. Some applications require the Router’s firewall to be configured in a specific way to operate properly. This usually requires opening TCP and UDP ports, and in some instances, setting trigger ports. An application that is UPnP-compliant has the ability to communicate with the Router, basically “telling” the Router which way it needs the firewall configured. The Router ships with the UPnP feature enabled.

USING THE WEB-BASED ADVANCED USER INTERFACE

SECTIONSTable of Con tent s 1 2 3 4 5 7 8 9 106

Enabling/Disabling Auto Firmware Update

This innovation provides the Router with the built-in capability to automatically check for a new version of firmware and alert you that the new firmware is available. When you log into the Router’s advanced interface, the Router will perform a check to see if new firmware is available. If so, you will be notified. You can choose to download the new version or ignore it.

N+ Wire less Router

ECO Mode: This option allows you to turn off the wireless radio

automatically at set periods of time in order to save power. Click the check box to turn off the radio at the times shown in the drop-down boxes.

USING THE WEB-BASED ADVANCED USER INTERFACE

SECTIONSTable of Con tent s 1 2 3 4 5 7 8 9 106

Manually Configuring Network Settings

Set up the computer that is connected to the cable or DSL modem FIRST using these steps. You can also use these steps to add computers to your Router after the Router has been set up to connect to the Internet.

Manually Configuring Network Settings in Mac OS up to 9.x

1. Pull down the Apple menu. Select “Control Panels” and select

“T CP/I P”.

2. You will see the TCP/IP control panel. Select “Ethernet Built-In” or “Ethernet” in the “Connect via:” drop-down menu (1).

(1)

(2)

N+ Wire less Router

3. Next to “Configure” (2), if “Manually” is selected, your Router

will need to be set up for a static IP connection type. Write the address information in the table below. You will need to enter this information into the Router).

4. If not already set, at “Configure:”, choose “Using DHCP Server”. This will tell the computer to obtain an IP address from the Router.

5. Close the window. If you made any changes, the following window will appear. Click “Save”.

Restart the computer. When the computer restarts, your network settings are now configured for use with the Router.

MANUALLY CONFIGURING NETWORK SETTINGS

SECTIONSTable of Con tent s 1 2 3 4 5 6 8 9 10

Manually Configuring Network Settings in Mac OS X

1. Click on the “System Preferences” icon.

2. Select “Network” (1) from the “System Preferences” menu.

3. Select “Built-in Ethernet” (2) next to “Show” in the Network menu.

(2) (3)

(4) (5)

(1)

4. Select the “TCP/IP” tab (3). Next to “Configure” (4), you should see “Manually” or “Using DHCP”. If you do not, check the PPPoE tab (5) to make sure that “Connect using PPPoE” is NOT selected. If it is, you will need to configure your Router for a PPPoE connection type using your user name and password.

N+ Wire less Router

+ 21 hidden pages