Belkin F5D7234-4 User Manual

G Wireless Router

User Manual

PM 01110 F5 D72 34 - 4

TABLE OF CONTENTS

SECTIONS 1 2 3 4 5 6 7 8 9 10Table of Con tent s

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Benefits of a Home Network � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 1 Advantages of a Wireless Network � � � � � � � � � � � � � � � � � � � � � � � � � � � � 1 Placement of your Router for Optimal Performance � � � � � � � � � � � � � � � 2

2 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Product Features � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5

3 Knowing your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Package Contents � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7 System Requirements � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �7 Setup Assistant Software System Requirements � � � � � � � � � � � � � � � � � 7

4 Connect ing a nd Configuring your Router . . . . . . . . . . . . . . . . . . 11

5 Alternate Setup Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

6 Using the Web- Base d Advanced User Inte rface . . . . . . . . . . . .43

Changing LAN Settings� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 43 Viewing the DHCP Client List Page � � � � � � � � � � � � � � � � � � � � � � � � � � � 45 Configuring the Wireless Network Settings � � � � � � � � � � � � � � � � � � � � � 46

G Wirel ess Router

Securing your Wi-Fi Network � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 50 WEP Setup � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 53 Using Wi-Fi Protected Setup � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �55 WPA Setup� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 56 Setting WPA/ WPA2 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 57 Guest Access � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �57 Using the Access Point Mode � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 59 Configuring the Firewall � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �64 Setting MAC Address Filtering � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �67 Enabling the DMZ � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 68 Utilities Tab � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �70 Restarting the Router � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 71 Updating the Firmware � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 78

7 Manually Configuring Network Settings . . . . . . . . . . . . . . . . . . .86

8 Recommended Web Browser Settings . . . . . . . . . . . . . . . . . . . .91

9 Troubl eshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93

10 Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

INTRODUCTION

SECTIONSTable of Con tent s 2 3 4 5 6 7 8 9 101

Thank you for purchasing the Belkin G Wireless Router (the Router)� The following two short sections discuss the benefits of home networking and outline best practices for maximizing your wireless home network range and performance� Please be sure to read through this User Manual completely, and pay special attention to the section entitled “Placement of your Router for Optimal Performance” on page 2�

Benefits of a Home Network

• Share one high-speed Internet connection with all the computers in your home

• Share resources, such as files and hard drives among all the connected computers in your home

• Share a single printer with the entire family

• Share documents, music, video, and digital pictures

• Store, retrieve, and copy files from one computer to another

• Simultaneously play games online, check Internet email, and chat

Advantages of a Wireless Network

• Mobilit y – you’ll no longer need a dedicate d “computer room”—now you can work on a networked laptop or desktop computer anywhere within your wireless range

• Easy installation – The Belkin Setup Assistant software makes setup simple

• Flexibility – set up and access printers, computers, and other networking devices from anywhere in your home

• Easy Expansion – the wide range of Belkin networking products lets you expand your network to include devices such as printer s and gaming consoles

• No cabling required – you can spare the expense and hassle of retrofitting Ethernet cabling throughout the home or office

• Widespread industr y acceptance – choose from a wide range of interoperable networking products

G Wirel ess Router

INTRODUCTION

SECTIONSTable of Con tent s 2 3 4 5 6 7 8 9 101

Placement of your Router for Optimal Performance

Important Factors for Placement and Setup

Your wireless connection will be stronger the closer your computer is to your Router� Typical indoor operating range for wireless devices is between 100 and 200 feet�

In the same way, your wireless connection and performance will degrade somewhat as the distance between your Router and connected devices increases� This may or may not be noticeable to you� As you move farther from your Router, connection spee d may decrease� Factors that can weaken signals simply by getting in the way of your net work’s radio waves are metal appliances or obstructions, and walls�

If you have concerns about your network’s performance that might be related to range or obstruction factors, try moving the computer to a position between five and 10 feet away from the Router in order to see if distance is the problem� If difficultie s persist eve n at close range, please contact Belkin Technical Support�

Note: While some of the items listed below can af fect network performance, they will not prohibit your wireless network from functioning; if you are concerned that your network is not operating at its ma ximum effec tiveness, this checklist may help�

1. Wireless Router Placement

Place your Router, the central connection point of your network, as close as possible to the center of your wireless network devices�

To achieve the best wireless net work coverage for your “wireless clients” (i�e�, computers enabled by Belkin Wireles s Notebook Network Cards, Wireless Desktop Network Cards, and Wireless USB Adapters):

• Ensure that your Router’s networking antennas are parallel to each other, and are positioned ver tically (toward the ceiling)� If your Router itself is positioned vertically, point the antennas as much as possible in an upward direction�

• In multistory homes, place the Router on a floor that is as close to the center of the home as possible� This may mean placing the Router on an upper floor�

• Try not to place the Router near a cordless phone�

2. Avoid Obstacles and Interference

Avoid placing your Router near devices that may emit radio “noise,” such as microwave ovens� Dense objects that can inhibit wireless communication include:

• Refrigerators

• Washers and/or dryers

• Metal cabinets

• Large aquariums

• Metallic-based, UV-tinted windows

If your wireless signal seems weak in some spots, make sure that objects such as these are not blocking the signal’s path (between your computers and Router)�

G Wirel ess Router

INTRODUCTION

SECTIONSTable of Con tent s 2 3 4 5 6 7 8 9 101

3. Cordless Phones

If the performance of your wireless network is impaired after attending to the above issues, and you have a cordless phone:

• Try moving cordless phones away from the Router and your wireless-enabled computers�

• Unplug and remove the batter y from any cordless phone that operates on the 2�4GHz band (check the manufacturer’s information)� If this fixes the problem, your phone may be interfering�

• If your phone suppor ts channel selection, change the channel on the phone to the farthest channel from your wireless network� For example, change the phone to channel 1 and move your Router to channel 11� See your phone’s user manual for detailed instructions�

• If necessar y, consider switching to a 900MHz cordless phone�

G Wirel ess Router

4. Choose the “Quietest” Channel for your Wireless Network

In locations where homes or offices are close together, such as apartment buildings or of fice complexes, there may be wireless networks nearby that can conflict with yours�

Use the Site Survey capabilities found in the wireless utility of your wireless adapter or card to locate any other wireless networks that are available (see your wireless adapter’s or card’s user manual), and move your Router and computers to a channel as far away from other networks as possible�

• Experiment with more than one of the available channels in order to find the clearest connection and avoid interference from neighboring cordless phones or other wireless devices�

• For Belkin wireless networking products, use the detailed Site Survey and wireless channel information included with your Wireless Net work Card or Adapter� See your Network Card’s user guide for more information�

These guidelines should allow you to cover the maximum possible area with your Router� Should you need to cover an even wider area, we suggest the Belkin Wireless G Universal Range Extender/Access Point�

INTRODUCTION

SECTIONSTable of Con tent s 2 3 4 5 6 7 8 9 101

5. Secure Connections, VPNs, and AOL

Secure connections typically require a user name and password, and are used where security is important� Secure connections include:

• Virtual Private Network ( VPN) connections, often used to connect remotely to an office network

• The “Bring Your Own Access” program from America Online (AOL), which lets you use AOL through broadband provided by another cable or DSL service

• Most online banking websites

• Many commercial websites that require a user name and password

to access your account

Secure connections can be interrupted by a computer’s power management setting, which causes it to “go to sleep�” The easiest solution to avoid this is to simply reconnect by rerunning the VPN or AOL software, or by re-logging into the se cure website�

A second alternative is to change your computer’s power management settings so it does not go to sleep; however, this may not be appropriate for portable computers� To change your power management setting under Windows, see the “Power Options” item in the Control Panel�

If you continue to have difficulty with secure connections, VPNs, and AOL, please review the steps above to be sure you have addres sed these issues�

For more information regarding our networking products, visit our website at ww w�belkin�com/networking�

G Wirel ess Router

PRODUCT OVERVIEW

SECTIONSTable of Con tent s 1 3 4 5 6 7 8 9 10

Product Features

In minutes you will be able to share your Internet connection and network your computers� The following is a list of features that make your new Belkin G Wireless Router an ideal solution for your home or small office network�

Works w ith Both PCs and Mac

The Router supports a variety of networking environments including

, 9�x, X v10�x, AppleTalk®, Linux®, Windows® 98, Me, NT®,

Mac OS 2000, XP, Vista

, and others� All that is needed is an Internet browser and a network adapter that suppor ts TCP/IP (the standard language of the Internet)�

Front-Panel LED Display

Lighted LEDs on the front of the Router indicate which functions are in operation� You’ll know at-a-glance whether your Router is connected to the Internet� This feature eliminates the need for advanced software and status-monitoring procedures�

Web-Based Advanced User Interface

You can set up the Router’s advanced functions easily through your web browser, without having to install additional software onto the computer� There are no disks to install or keep track of and, best of all, you can make changes and perform setup functions from any computer on the network quickly and easily�

Computers

NAT IP Address Sharing

Your Router employs Network Address Translation (NAT) to share the single IP address assigned to you by your Internet Service Provider while saving the cost of adding IP addresses to your Internet service account�

SPI Firewall

Your Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks including IP Spoofing, Land Attack, Ping of Death (PoD), Denial of Service (DoS), IP with zero length, Smurf Attack, TCP Null Scan, SYN flood, UDP flooding, Tear Drop Attack, ICMP defect, RIP defect, and fragment flooding�

Integrated 10/100 4-Port Switch

The Router has a built-in, 4-port network switch to allow your wired computers to share printers, data and MP3 files, digital photos, and much more� The switch features automatic detection so it will adjust to the speed of connected devices� The switch will transfer data between computers and the Internet simultaneously without interrupting or consuming resources�

Universal Plug-and-Play (UPnP) Compatibility

UPnP (Universal Plug-and-Play) is a technology that offers seamless operation of voice messaging, video mes saging, games, and other applications that are UPnP-compliant�

G Wirel ess Router

PRODUCT OVERVIEW

SECTIONSTable of Con tent s 1 3 4 5 6 7 8 9 102

Suppor t for VPN Pass-Through

If you connect to your office network from home using a VPN connection, your Router will allow your VPN-equipped computer to pass through the Router and to your office net work�

Built-In Dynamic Host Configuration Protocol (DHCP)

Built-In Dynamic Host Configuration Protocol (DHCP) on-board makes for the easiest possible connection of a network� The DHCP server will assign IP addresses to each computer automatically so there is no need for a complicated networking setup�

Setup Assistant

The Setup Assistant takes the guesswork out of setting up your Router� This automatic soft ware determines your network settings for you and sets up the Router for conne ction to your Internet Service Provider (ISP)� In a matter of minutes, your Wireless Router will be up and running on the Internet�

NOTE: Setup Assistant software is compatible with Windows 200 0, XP, Vista, and Mac OS X v10�4 and v10�5� If you are using another operating system, the Wireless Router can be set up using the Alternate Setup Method described in this User Manual (see page 25)�

G Wirel ess Router

Integrated 802.11g Wireless Access Point

802�11g is an exciting new wireless technology that achieves data rates up to 54Mbps, nearly five times faster than 802�11b�

MAC Address Filtering

For added security, you can set up a list of MAC addresses (unique client identifiers) that are allowed access to your net work� Every computer has its own MAC address� Simply enter these MAC addresses into a list using the Web-Based Advanced User Interface and you can control access to your network�

KNOWING YOUR ROUTER

SECTIONSTable of Con tent s 1 2 4 5 6 7 8 9 10

Package Contents

• Belkin G Wireless Router

• Quick Installation Guide

• Belkin Setup Assistant CD with User Manual

• Belkin RJ45 Ethernet Networking Cable

• Power Supply

System Requirements

• Broadband Internet connection such as a cable or DSL modem

with RJ45 (Ethernet) connection

• At least one computer with an installed network inter face adapter

• TCP/IP networking protocol installed on each computer

• RJ45 Ethernet networking cable

• Internet browser

Setup Assistant Software System Requirements

• A PC running Windows 2000, XP, or Vista, or a Mac computer

running Mac OS X v10�4 or v10�5

• Minimum 512MB RAM

• Internet browser

The Router has been designed to be placed on a desk top� All of the cables exit from the rear of the Router for better organization and utility� The LED indicators are easily visible on the front of the Router to provide you with information about network activity and status�

(1)

(2)

(3)

(4)

(5)

(6)

G Wirel ess Router

KNOWING YOUR ROUTER

SECTIONSTable of Con tent s 1 2 4 5 6 7 8 9 103

1. Mode m LED

This LED lights in GREEN to indicate that your modem is connected properly to the Router� It blinks rapidly when information is being sent over the port between the Router and the modem�

OFF Not connected to the modem

Solid Green Connected to the modem

Blinking Green

2. Power LED

When you apply power to the Router or restart it, a short period of time elapse s while the Router boots up� During this time, the Power LED blinks� When the Router has completely booted up, the Power LED becomes a SOLID light, indicating the Router is ready for use�

OFF Router is OFF

Blinking Green Router is booting up

Solid Green Router is ON and ready

G Wirel ess Router

Router is connecting to the ISP/ indicates modem activity

3. Security LED

OFF Wireless security is OFF

Solid Green Wireless security is ON

Flashing Green WPS sync in progress

4. Wireless LED

OFF Wireless is OFF

Solid Green Wireless is ON and ready

Blinking Green Indicates wireless activit y

KNOWING YOUR ROUTER

SECTIONSTable of Con tent s 1 2 4 5 6 7 8 9 103

5. Internet LED

This unique LED shows you when the Router is connected to the Internet� When the light is OFF, the Router is NOT connected to the Internet� When the light is blinking, the Router is attempting to conne ct to the Internet� When the light is solid GREEN, the Router is connected to the Internet� When using the “Disconne ct af ter x minutes” feature, this LED becomes extremely useful in monitoring the status of your Router’s connection�

OFF

Blinking Green

Solid Green

6. Wired LEDs (1 – 2 – 3 – 4)

These LEDs are labeled 1– 4 and correspond to the numbered ports on the rear of the Router� When a computer is properly connected to one of the wired computer ports on the rear of the Router, the LED will light� GREEN means a 10/100Base-T device is connected� When information is being sent over the port, the LED blinks rapidly�

OFF No device is linked to the por t

Green 10/100Base-T device connected

Blinking Green Port activit y

Router is not connected to the Internet

Router is atte mpting to connect to the Internet

Router is connected to the Internet

(7)

(10)

(8)

(9)

G Wirel ess Router

KNOWING YOUR ROUTER

SECTIONSTable of Con tent s 1 2 4 5 6 7 8 9 103

7. Power Jack

Connect the included 5V DC power supply to this jack�

8. Connections to Computers (Wired Computer Ports) – Gray

Connect your wired (non-wireless) computers to these ports� These ports are RJ45, 10/100 auto -negotiation, auto-uplinking por ts for standard UTP category 5 or 6 Ethernet cable� The ports are labeled 1 through 4� These ports correspond to the numbered LEDs on the front of the Router�

9. Con nection to Mod em (Modem Port) – Yellow

This port is for connection to your cable or DSL modem� Use the cable that was provided with the modem to connect the modem to this port� Use of a cable other than the cable supplied with the cable modem may not work properly�

G Wirel ess Router

10. Reset Button

The “Reset” button is used in rare cases when the Router may function improperly� Resetting the Router will restore the Router’s normal operation while maintaining the programmed settings� You can also restore the factory default settings by using the “Reset” button� Use the restore option in instances where you may have forgotten your custom password�

a. Resetting the Router

Push and release the “Reset” button� The lights on the Router will momentarily flash� The “Power” light will begin to blink� When the “Power” light becomes solid again, the reset is complete�

b. Restoring the Factory Defaults

Press and hold the “Reset” button for at least 10 seconds, then release it� The lights on the Router will momentarily flash� The “Power” light will begin to blink� When the “Power” light becomes solid again, the restore is complete�

CONNECTING AND CONFIGURING YOUR ROUTER

SECTIONSTable of Con tent s 1 2 3 5 6 7 8 9 10

Verify the contents of your box. You should have the following:

• Belkin G Wireless Router

• Quick Installation Guide

• Belkin Setup Assistant Software CD with User Manual

• RJ45 Ethernet Networking Cable

• Power Supply

Modem Requirements

Your cable or DSL modem must be equipped with an RJ45 Ethernet port� Many modems have both an RJ45 Ethernet port and a USB connection� If you have a modem with both Ethernet and USB, and are using the USB connection at this time, you will be instructed to use the RJ45 Ethernet port during the installation procedure� If your modem has only a USB port, you can request a different type of modem from your ISP, or you can, in some cases, purchase a modem that has an RJ45 Ethernet por t on it�

ALWAYS INSTALL YOUR ROUTER FIRST! If you are installing

numerous network devices for the first time, it is important that your router is connected and running before attempting to install other network components such as notebook cards and desk top cards�

Setup Assistant

Belkin has provided our Setup Assistant soft ware to make installing your Router a simple and easy task� You can use it to get your Router up and running in minutes� The Setup Assistant requires that your Windows 2000, XP, or Vista, or Mac OS X v10�4 or v10�5, computer be connected directly to your cable or DSL modem and that the Internet connection is active and working at the time of installation� If it is not, you must use the “Alternate Setup Method” section of this User Manual to configure your Router� Additionally, if you are using an operating system other than Windows 2000, XP, or Vista, or Mac OS X v10�4 or v10�5, you must set up the Router using the “Alternate Setup Method” section of this User Manual�

G Wirel ess Router

CONNECTING AND CONFIGURING YOUR ROUTER

LAN

WAN

SECTIONSTable of Con tent s 1 2 3 5 6 7 8 9 104

Step 1: Hardware Connections

A. Unplug your modem’s power cord� Put the Router next to the

modem� Raise the Router’s antenna�

B. Locate the networking cable that connects your modem and

computer� Unplug that cable from your modem, and plug it into any gray port on the back of the Router�

C. Find your new networking cable (included in the box with your

Router) and connect it to the yellow port on the back of the Router� Connect the other end to your modem, in the por t that’s now free�

D. Plug in your modem’s power cord� Wait 6 0 seconds for the modem

to star t up� Plug the Router’s power supply into the black port on the back� Plug the other end into the wall outlet�

G Wirel ess Router

E. Wait 20 seconds for the

Router to star t up� Look at the display on the front of the Router� Make sure the “Wired” and “Power” icons are lit up in blue� If they are not, recheck your connections�

CONNECTING AND CONFIGURING YOUR ROUTER

SECTIONSTable of Con tent s 1 2 3 5 6 7 8 9 104

Step 2: Set Up the Router – Run the Setup Assistant Software

A. Shut down any programs that are running on your computer at this

time� Turn off any firewall or Internet-connection-sharing software on your computer�

B. Insert the CD into your computer� The Setup Assistant will

automatically appear on your computer’s screen within 15 seconds� Click on “Go” to run the Setup Assistant� Follow the instructions there�

IMPORTANT: Run the Setup Assistant from the computer that is

directly connected to the Router from Step 1 – B�

Note for Windows Users: If the Setup Assistant does not start up automatically, select your CD-ROM drive from “My Computer” and double-click on the file named “SetupAssistant ” to start the Setup Assistant�

G Wirel ess Router

CONNECTING AND CONFIGURING YOUR ROUTER

SECTIONSTable of Con tent s 1 2 3 5 6 7 8 9 104

Select Countr y

Select your countr y from the drop-down box� Click “Begin” to continue�

G Wirel ess Router

Confirmation Screen

Verify that you have completed all QIG steps by checking the box to the right of the arrow� Click “Next ” to continue�

CONNECTING AND CONFIGURING YOUR ROUTER

SECTIONSTable of Con tent s 1 2 3 5 6 7 8 9 104

Progress Screen

Setup Assistant will show you a progress screen each time a step in the setup has been completed�

G Wirel ess Router

2.1 Checking Settings

The Setup Assistant will now examine your computer’s network settings and gather information needed to complete the Router’s connection to the Internet�

CONNECTING AND CONFIGURING YOUR ROUTER

SECTIONSTable of Con tent s 1 2 3 5 6 7 8 9 104

2.2 Verifying Hardware Connections

The Setup Assistant will now verif y your hardware connection�

G Wirel ess Router

2.3 Naming your Wireless Network

The Setup Assistant will display the default wireless network name or Service Set Identifier (SSID)� This is the name of your wireless network to which your computers or devices with wireless network adapters will connect� You can either use the default or change it to something unique� Write down this name for future reference�

CONNECTING AND CONFIGURING YOUR ROUTER

SECTIONSTable of Con tent s 1 2 3 5 6 7 8 9 104

2.4 Requesting Internet Account Info (if needed)

Select your ISP from the drop-down boxes�

If your Internet account requires a login and password, you will be prompted with a screen similar to the illustration below� Click “Next” to continue�

G Wirel ess Router

CONNECTING AND CONFIGURING YOUR ROUTER

SECTIONSTable of Con tent s 1 2 3 5 6 7 8 9 104

2.5 Configuring the Router

The Setup Assistant will now configure your Router by se nding data to the Router and restarting it� Wait for the on-screen instructions�

Note: Do not disconnect any cable or powe r off the Router while the Router is rebooting� Doing so will render your Router inoperable�

G Wirel ess Router

2.6 Checking Internet Connection

We are almost done� The Setup Assistant will now check your connection to the Internet�

CONNECTING AND CONFIGURING YOUR ROUTER

SECTIONSTable of Con tent s 1 2 3 5 6 7 8 9 104

Congratulations

You have finished installing your new Belkin Router� You will see the Congratulations screen when your Router can conne ct to the Internet� You can begin surfing by opening your browser and going to any website�

You can use the Setup Assistant to set up your other wired and wireless computers to connect to the Internet by clicking “Next”� If you decide to add computers to your Router later, select “Finish—return to Main Menu” and then click “Next”�

G Wirel ess Router

Troubleshooting

If the Setup Assistant is not able to connect to the Internet, you will see the following screen� Follow the on-screen instructions to go through the troubleshooting steps�

CONNECTING AND CONFIGURING YOUR ROUTER

SECTIONSTable of Con tent s 1 2 3 5 6 7 8 9 104

2.7 Optional: Assistance Connecting Other Computers

This optional step will help you to connect additional wired and wireless computers to your net work� Follow the on-screen instructions�

Once you have verified that your other wired and wireless computers are properly connected, your network is set up and working� You can now surf the Internet� Click “Next” to return to the main menu�

G Wirel ess Router

CONNECTING AND CONFIGURING YOUR ROUTER

SECTIONSTable of Con tent s 1 2 3 5 6 7 8 9 104

Step 3: Set Up Wireless Security – Run the Security Assistant Software

Now that your network is set up and working, it is recommended that you turn on wireless security to prevent unauthorized access to your network from neighboring wireless-enabled computers� The Security Assistant will guide you through the process� Click “Security Assistant” and follow the on-screen instructions�

IMPORTANT: Run the Setup Assistant from the computer that is

directly connected to the Router from Steps 1�1B and 1�2B�

G Wirel ess Router

CONNECTING AND CONFIGURING YOUR ROUTER

SECTIONSTable of Con tent s 1 2 3 5 6 7 8 9 104

Progress Screen

The Securit y Assistant will show you a progre ss screen each time a step has been completed�

G Wirel ess Router

3.1 Picking the Security Type

Select the security type for your wireless network and click “Next” to continue�

CONNECTING AND CONFIGURING YOUR ROUTER

SECTIONSTable of Con tent s 1 2 3 5 6 7 8 9 104

3.2 Creating a Network Key

Enter a network key (PSK) for your wireless network and click “Next” to continue�

G Wirel ess Router

3.3 Transferring the Key

After setting up your wireless security, you will have to transfer the network key to each of your wireless computers� Click on “Transfer Key” if you have a USB flash drive� Follow the on-screen instructions, or click on “Print” to print the information� Manually enter it to each wireless computer� Then, click “Next” to continue�

CONNECTING AND CONFIGURING YOUR ROUTER

SECTIONSTable of Con tent s 1 2 3 5 6 7 8 9 104

3.4 Verifying the Connection

If all your wireless computers are able to connect to the Router, click “Next”� If you are having trouble, select “I had problem with at least one computer” and click “Next”� Then, follow on-screen instr uctions�

G Wirel ess Router

Congratulations

Once you have verified that your wireless computers are prope rly connected, your wireless network is set up and secured� You now can run your network wirelessly and securely� Click “Finish” to take you back to the main menu�

ALTERNATE SETUP METHOD

SECTIONSTable of Con tent s 1 2 3 4 6 7 8 9 10

The Web-Based Advanced User Interface is a web-based tool that you can use to set up the Router if you don’t want to use the Setup Assistant software� You can also use it to manage advanced functions of the Router� From the Web-Based Advanced User Inter face, you can perform the following tasks:

• View the Router’s current settings and status

• Configure the Router to connect to your ISP with the settings that

they provided you

• Change the current network settings such as the Internal IP

addres s, the IP address pool, DHCP settings, and more

• Set the Router’s firewall to work with specific applications

(port forwarding)

• Set up security features such as client restrictions, MAC addres s

filtering, WEP, and WPA

• Enable the DMZ feature for a single computer on your network

• Change the Router’s internal password

• Enable/Disable UPnP (Universal Plug-and-Play)

• Reset the Router

• Back up your configuration settings

• Reset the Router’s default set tings

• Update the Router’s firmware

Step 1 Connect your Router

1.1 Turn off the power to your modem by unplugging the power supply

from the modem�

1.2 Locate the network cable that is connected bet ween your modem and your computer and unplug it from your computer, leaving the other end connected to your modem�

1.3 Plug the loose end of the cable you just unplugged into the por t on the back of the Router labeled “Modem”�

1.4 Connec t a new network cable (not included) from the back of the computer to one of the wired computer por ts labeled “1–4”� Note: It does not matter which numbered port you choose�

1.5 Turn your cable or DSL modem on by reconnecting the power supply to the modem�

G Wirel ess Router

ALTERNATE SETUP METHOD

LAN

WAN

1.4

1.6b

1.5

1.1

1.6 a

1.2

1.3

SECTIONSTable of Con tent s 1 2 3 4 6 7 8 9 105

Note: Your Router may have por ts in different locations than depicted in the illustration above�

1.6 Before plugging the power cord into the Router, plug the cord into the wall, then plug the cord into the Router’s power jack�

1.7 Verify that your modem is connected to the Router by checking the lights on the front of the Router� The green light labeled “Modem” should be ON if your modem is connected correctly to the Router� If it is not, recheck your connections�

1.8 Verify that your computer is connected properly to the Router by checking the lights labeled “1–4”� The light that corresponds to the numbered por t connected to your computer should be ON if your computer is connected properly� If it is not, recheck your connections�

G Wirel ess Router

ALTERNATE SETUP METHOD

SECTIONSTable of Con tent s 1 2 3 4 6 7 8 9 105

Step 2 Set up your Computer’s Network Settings to Work with a DHCP Server

See the section in this Use r Manual called “Manually Configuring Network Settings” for directions�

Step 3 Configure the Router Using the Web-Based Advanced User Interface

Using your Internet browser, you can access the Router’s Web-Based Advance d User Interface� In your browser, type “192�168�2�1” (you do not need to type in any thing else such as “http://” or “www”)� Then press the “Enter” key�

G Wirel ess Router

PLEAS E NOTE: If you have dif ficulty accessing the Router’s Web -Base d

Advance d User Interface, go to the section entitled “Manually Configuring Network Settings”�

ALTERNATE SETUP METHOD

SECTIONSTable of Con tent s 1 2 3 4 6 7 8 9 105

Logging into the Router

You will see the Router’s home page in your browser window� The home page is visible to any user who wants to see it� To make any changes to the Router’s settings, you have to log in� Clicking the “Login” button or clicking on any one of the links on the home page will take you to the login screen� The Router ships with no password entered� In the login screen, leave the password blank and click the “Submit” button to log in�

G Wirel ess Router

Logging out of the Router

One computer at a time can log into the Router for the purposes of making changes to the settings of the Router� Once a user has logged in to make changes, there are t wo ways that the computer can be logged out� Clicking the “Logout” button will log the compute r out� The second method is automatic� The login will time out after a specified period of time� The default login time -out is 10 minutes� This can be changed from 1 to 99 minutes� For more information, see the sec tion in this manual entitle d “Changing the Login Time-Out Setting”�

+ 85 hidden pages