Belkin F5D7010CE2 User Manual

CETECOM Inc.

CETECOM Inc.

411 Dixon Landing Road, Milpitas, CA-95035, USA
Phone: [phone] Fax: [phone]
www.cetecom.com

Issued test report consists of 25 Pages Page 1 (25)

FCC LISTED, REG. NO.: 101450

&

RECOGNIZED BY INDUSTRY CANADA

IC – 3925

Test report no.: EMC_381EN489-17_2002

ETSI EN 301 489-17 V1.1.1 (2000-09)

(BCM94306CB)

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 2 (25)

Table of Contents

1 General information

1.1 Notes

1.2 Testing laboratory

1.3 Details of applicant

1.4 Application details

1.5 Test item

1.6 Test standards

2 Technical test

2.1 Summary of test results

2.2 Test report

1 General information

1.1 Notes

The test results of this test report relate exclusively to the test item specified in 1.5. The CETECOM
Inc. USA does not assume responsibility for any conclusions and generalisations drawn from the test
results with regard to other specimens or samples of the type of the equipment represented by the test
item. The test report may only be reproduced or published in full. Reproduction or publication of
extracts from the report requires the prior written approval of the CETECOM Inc USA.

TEST REPORT PREPARED BY:
EMC Engineer: Philip Kim

1.2 Testing laboratory
CETECOM Inc.
411 Dixon Landing Road, Milpitas, CA-95035, USA
Phone: [phone] Fax: [phone]
E-mail: [e-mail]
Internet: www.cetecom.com

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 3 (25)

1.3 Details of applicant

Name : Broadcom corporation

Street : 190 Mathilda Place

City / Zip Code : Sunnyvale, 94086

Country : USA

Contact : Chris McGough

Telephone : [phone]

Tele-fax : [phone]

e-mail : [e-mail]

1.4 Application details

Date of receipt of application : 2002-12-19
Date of receipt test item : 2002-11-21
Date of test : 2002-12-06, 2002-12-13 and 2002-12-14

1.5 Test item

Manufacturer : See Applicant
Model No. : BCM94306CB

Description : 54g Wireless Lan cardbus PC card

Additional information
Frequency : 2412MHz – 2472MHz
Type of modulation : OFDM (orthognal frequency division multiplexing)
Number of channels : 13
Antenna : 1dBi external antenna
Power supply : From Host
Output power : 16.09dBm (40.64mW) max. EIRP
Extreme temp. Tolerance : 0 to +50

1.6 Test standards: ETSI EN 301 489-17 V1.1.1 (2002-09)

o

C

ETSI EN 301 489-1 V1.2.1 (2000-08)

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 4 (25)

2 Technical test

2.1 Summary of test results

No deviations from the technical specification(s) were ascertained in the course of the tests

Performed

Final Verdict:

(only “passed” if all single measurements are “passed”)

Technical responsibility for area of testing:

2003-01-10 EMC & Radio Lothar Schmidt (Manager)

Date Section Name Signature

Responsible for test report and project leader:

Passed

2003-01-10 EMC & Radio Philip Kim (EMC Engineer)

Date Section Name Signature

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 5 (25)

2.2 Test report

TEST REPORT

Test report no. : EMC_381EN489-17_2002

(BCM94306CB)

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 6 (25)

SUMMARY OF TEST RESULTS 7

EMISSION (EMI) 7

IMMUNITY (EMS) 7

GENERAL PERFORMANCE CTIRERIA 8

EMISSION TEST: 9

RADIATED EMISSIONS 9

AC LINE CONDUCTED EMISSIONS 10

HARMONIC CURRENT EMISSIONS 11

FLICKER AND VOLTAGE FLUCTUATION 12

IMMUNITY TEST: 13

RADIATED, RF ELECTROMAGNETIC FIELDS 13

RF COMMON MODE 14

ELECTROSTATIC DISCHARGE 15

FAST TRANSIENTS COMMON MODE 16

SURGES COMMON & DIFFERENTIAL MODE (1-phase) 17

VOLTAGE DIPS 18

PLOTS 19

TEST EQUIPMENT AND ANCILLARIES USED FOR TESTS 21

PHOTOGRAPHS 24

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 7 (25)

SUMMARY OF TEST RESULTS

EMISSION (EMI)

EMI

Phenomenon

Standard Basic standard

Conducted

Interference voltage,

0.15 – 30*MHz
Radiated

Interference Field

Strength

30 – 1000*MHz

Harmonic Current

Emissions

Flicker & Voltage

Fluctuation

IMMUNITY (EMS)

EMS

Phenomenon

Standard

Electrostatic

discharge

(ESD)

RF-electro-magnetic

field

Fast transients,

BURST

Surge

Transients & Surges

vehicular

evironment

RF Common mode

Vol. Dips,

interruptions &

fluctuations (AC

Power)

na=not applicable

Port Requirements EUT set-

AC Mains

Enclosure

AC mains

input port

AC mains

input port

ETSI EN 301 489-1,

2000-08

Chap. 8.4

ETSI EN 301 489-1,

2000-08

Chap. 8.2

ETSI EN 301 489-1,

2000-08

Chap. 8.5

ETSI EN 301 489-1,

2000-08

Chap. 8.6

EN 55022:1998

+Corr.2001 + A1:2000

EN 55022:1998

+Corr.2001 + A1:2000

EN 61000-3-2: 2000 na Complies Not Applicable

EN 61000-3-3: 2000 na Complies Not Applicable

Port Requirements EUT set-

Basic standard

ETSI EN 301 489-1,

Enclosure

Enclosure

Powerline

AC / DC

Powerline

(1 phase)

Powerline

(car

charger)

Powerline

AC/DC

signal lines

Input &
output AC
ports only

2000-08

Chap. 9.3

--

ETSI EN 301 489-1,

2000-08

Chap. 9.2

--

ETSI EN 301 489-1,

2000-08

Chap. 9.4

--

ETSI EN 301 489-1,

2000-08

Chap. 9.8

--

ETSI EN 301 489-1,

2000-08

Chap. 9.6

--

ETSI EN 301 489-1,

2000-08

Chap. 9.5

--

ETSI EN 301 489-1,

2000-08

Chap. 9.7

--

EN 61000-4-2: 1995
+A1: 1998+A2:2001

EN 61000-4-3: 1996
+A1: 1998+A2:2001

EN 61000-4-4: 1995

+A1: 2001

EN 61000-4-5: 1995

+A1: 2001

ISO 7637-1/2:1990

(12/24VDC)

EN 61000-4-6: 1996

+A1: 2001

EN 61000-4-11: 1994

+A1: 2001

Result Applicability

up

na Complies Not Applicable

na Complies Applicable

Result Applicability

up

na Complies Applicable

na Complies Applicable

na Complies Not Applicable

na Complies Not Applicable

na Complies Not Applicable

na Complies Not Applicable

na Complies Not Applicable

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 8 (25)

GENERAL PERFORMANCE CRITERIA
The performance criteria are:

-performance criteria A for immunity tests with phenomena of a continuous nature;

Communication between the BCM94306CB and BCM94306MP in the form of pings should not drop
during the test.

-performance criteria B for immunity tests with phenomena of a transient nature;

N/A

-performance criteria C for immunity tests with power interruptions exceeding a certain time.

N/A

NOTE: For details see subclause 6.2 ETSI EN 301 489-17

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 9 (25)

EMISSION TEST:
RADIATED EMISSIONS

This test assessses the ability of ancilliary equipment to limit their internal noise from being radiated from the enclosure.

According to EMC basic standard (EN 55022)

Measurement according to EMC basic standard, but performed in the anechoic chamber with a reduced measuring distance of
3m. The reduction of the measuring distance and the existing floor absorber are corrected with the chamber factor (Method
Dr. Garn, Austrian Research Centre, Seibersdorf). The test results of the anechoic chamber correspond to the 10m-OATS
results

Test setup

EUT was setup in an anechoic chamber

Limits

Freq. Range

Limit (Quasi peak)

30MHz – 230MHz 30dBµV/m

230MHz – 1000MHz 37dBµV/m

EUT Type and
S/N or EUT set-up
no.

Plot

No.

1.1 -- 0 º - 360º h/v

Remarks: All measurements were carried out in peak mode. As long as the values stay under the average limit line
No QP measurements are carried out.

receiving

antenna

directed to

Set.

angle of

turntable

polari-sation

(h / v)

comment

(e.g. operating mode or

operating mode no.)

EUT operating mode 3 Passed

result

(passed /

failed)

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 10 (25)

AC LINE CONDUCTED EMISSIONS

According to EMC basic standard (EN 55022 [7] Class-B)

1.For the table top EUT the distance to the reference ground plane (wall) should be 40 cm.

2.AC input line plugged into LISN

EUT Operating mode

Tx at middle. channel

Plot no. Powerline

(L,N)

-- L+N QP Final measurement

Note: This test does not apply due to the fact that EUT’s power is host dependant.

EUT operating mode or

operating mode no.

Detector

(Peak,

AV, QP)

Additional (scan-) information

(e.g. Pre-test Fastscan,

Maxhold,

Final measurement)

Result

(passed /

failed )

N/A

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 11 (25)

HARMONIC CURRENT EMISSIONS

This test was performed as per EMC Basic Standard EN 61000-3-2(Dec-2000)

EUT Operating mode

Tx at middle. channel

Plot No. Port EUT operating mode or

operating mode no.

-- AC input Tx at mid. channel N/A

Note: This test does not apply due to the fact that EUT’s power is host dependant.

Result

(passed / failed )

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 12 (25)

FLICKER AND VOLTAGE FLUCTUATION

This test was performed as per EMC Basic Standard EN 61000-3-3

EUT Operating mode

Tx at middle. channel

Plot No. Port EUT operating mode or

-- AC input Tx at mid. channel N/A

Note: This test does not apply due to the fact that EUT’s power is host dependant.

Result

operating mode no.

(passed / failed )

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 13 (25)

IMMUNITY TEST:
RADIATED, RF ELECTROMAGNETIC FIELDS

According to EMC basic standard (EN 61000-4-3[9])

· The distance between the turn-table axis and TX-antenna is 3m.

· Field strength = 3V/m

· Start Frequency = 80MHz Stop Frequency = 1000MHz

· Frequency Step = lin 1MHz

· Modulation = AM, 1KHz, 80%

Failure Criteria

Describe applicable failure criteria for EUT

Example

1.Continuous data transfer between EUT and Mini PCI Access Point

2.Transmitting following data: 65 bytes from 192.168.1.1 icmp_seg = xxx + H = 255 time = xxx

3.If connection drops then the the program will display “Request Timed out”

Failure Criteria obesrved

Describe how failure criteria was observed

Example

1. Observe continuous scrolling “# ” on the screen

Plot

no.

5.1 vertical Front No reactions recognized passed

5.2 horizontal Front No reactions recognized passed

Antenna

Polarity

Radiation to

Reaction of the EUT

During and after test

Performance criteria A observed

Result

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 14 (25)

RF COMMON MODE

According to EMC basic standard (EN 61000-4-6[10])
Start Frequency = 150KHz Stop Frequency = 80MHz
Frequency Step = 50KHz in the range of 150KHz – 5MHz
1% increment in the range of 5MHz – 80MHz
Field strength = 3V/m
Modulation = AM, 1KHz, 80%

Test setup

Injection via CDN or BIC clamp

Failure Criteria

Failure Criteria obesrved

Plot no.

Injection on

Injection Via Reaction of EUT during and after test Result

-- AC input power line CDN No reactions recognized N/A

Performace criteria A observed

Note: This test does not apply due to the fact that EUT’s power suuply is host
dependant.

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 15 (25)

ELECTROSTATIC DISCHARGE

According to EMC basic standard (EN 61000-4-2[10])

For the table top EUT the distance to the reference ground plane should be 80 cm.
Direct contact discharge on conducting surfaces of EUT
Indirect air discharge on insulating surfaces of EUT
±2kV, ±4kV direct discharge & ±2kV, ±4kV, ±8KV air discharger

Test setup

Failure Criteria

Failure Criteria obesrved

10 Single impulses at each test point and for each test voltage

Contact discharge

to conducted surfaces and to coupling planes

Direct contact discharge Indirect contact discharge

Test voltage Reaction of EUT / result Reaction of EUT / result Reaction of EUT / result

+2 kV

-2 kV

+4 kV

-4 kV

+6 kV

-6 kV

+8 kV

-8 kV

Remarks: n.r.r = no reaction recognized

Performance Criteria A observed

n.r.r. passed
n.r.r. passed
n.r.r. passed
n.r.r. passed

-

-

-

-

n.r.r. passed
n.r.r. passed
n.r.r. passed
n.r.r. passed

-

-

-

-

Air discharge

at insulating surfaces

n.r.r. passed
n.r.r. passed
n.r.r. passed
n.r.r. passed

n.r.r. passed
n.r.r. passed

-

-

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 16 (25)

FAST TRANSIENTS COMMON MODE

According to EMC basic standard (EN 61000-4-4[11])

1.For the table top EUT the distance to the reference ground plane should be 80 cm.

2.The test level for ac mains power input ports shall be 1KV open curcuit.

Test setup

Burst on Power Line (direct injection)

Failure Criteria

Failure Criteria obesrved

Adjustment on UCS 500 M4:
Trigger: "AUTO", Burst length: 15 ms

Testing on power
line(direct injection)

Test

voltage

-0,5 kV

+0,5 kV

-1,0 kV

+1,0 kV

n.r.r = no reaction recognized, N/A = not applicable

repetition

frequency

5 kHz
5 kHz
5 kHz
5 kHz

L1=> GND
(+=>
GND)

n.r.r.

n.r.r

n.r.r.

n.r.r

reaction of the test object during and after test result

L2=> GND

N/A
N/A
N/A
N/A

Performance Criteria A observed

Note: This test does not apply due to the fact that EUT’s power suuply is host
dependant.

testing time: n 60 s for every voltage and polarity
¨ 120 s for every voltage and polarity

L3=>
GND

N/A
N/A
N/A
N/A

N =>
GND

n.r.r.
n.r.r.
n.r.r.
n.r.r.

PE=>
GND

N/A
N/A
N/A
N/A

L1, N,

=>

GND

n.r.r.
n.r.r.
n.r.r.
n.r.r.

passed
passed
passed
passed

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 17 (25)

SURGES COMMON & DIFFERENTIAL MODE (1-phase)

According to EMC basic standard (EN 61000-4-5[14])

1.For the table top EUT the distance to the reference ground plane should be 80 cm.

2.1KV open circuit for common mode & 0.5KV open circuit for differential mode.

Failure Criteria

Failure Criteria obesrved

5 pulses for each polarity and test voltage, alternating negative/positive, triggered in case of AC-powerline: 0°, 45°, 90°, 180°,
270° referred to the line frequency (L1),
repetition rate is 1 per min.

Test
voltage
0°/pulse no. 1, 2 45°/no. 3, 4 90°/no. 5, 6 180°/no. 7, 8 270°/no. 9, 10

reaction of the test object during and after test by trigger angle/pulse no.
(coupling on DC-lines => trigger angle not relevant)

Result

capacitive coupling on AC lines: L 1 => N or DC lines + => - (R = Ri = 2 W / C = 18 µ F )

-0,5 kV
+0,5 kV

-1,0 kV
+1,0 kV

-2,0 kV
+2,0 kV

- kV
+ kV

Performance Criteria A observed

no reaction

recognized

no reaction

recognized

N/A N/A N/A N/A N/A --

N/A N/A N/A N/A N/A --

no reaction
recognized
no reaction
recognized

no reaction
recognized
no reaction
recognized

no reaction
recognized
no reaction
recognized

no reaction
recognized
no reaction
recognized

passed

passed

Note: This test does not apply due to the fact that EUT’s power suuply is host
dependant.

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 18 (25)

VOLTAGE DIPS

According to EMC basic standard (EN 61000-4-11 [13])

1.For the table top EUT the distance to the reference ground plane should be 80 cm.

2.The test level shall be – a vol. Reduction of the supply vol. of 30% for 10ms; 60% for 100ms
and >95% for 5000ms

Failure Criteria

Failure Criteria obesrved

for each test 3 repetitions in an interval of 10 s
time for decrease or increase of supply voltage: T down/up < 5 µs (due to switching

ominal
supply

voltage

U 1

100% UN:

n 230V

¨

100% UN:

n 230V

¨

100% UN:

n 230V

¨

n.r.r – no reaction recognized

Note: This test does not apply due to the fact that EUT’s power suuply is host
dependant.

start by trigger

angle
(AC)

0°° 10 ms

0°° 100 ms

0°° 5000 ms

duration of

test voltage

T U2 U 2

test voltage

70% U

n 161 V

N

¨

40% U

N

n 92 V

¨

0% U

N

0 V

reaction of EUT during and after

test

n.r.r – performance criteria A

observed

n.r.r – performance criteria A

observed

performance criteria C observed N/A

result

N/A

N/A

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 19 (25)

PLOTS
Plot 1.1

Marker: 455.711423 MHz 33.24 dBµV/m

Level [dBµV/m]

90

80

60

40

20

0

-20
30M 50M 70M 100M 200M 300M 500M 700M 1G

Frequency [Hz]

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 20 (25)

Plot 5.1
Polarization: Vertical

Marker: 1 GHz 0 -

EUT Nogo [-]

1.5

1.0

0.5

0.0

-0.5
80M100M 200M 300M 400M 500M600M 800M 1G

Frequency [Hz]

Marker: 1 GHz 3.018376 V/m

Immunity Level [V/m]

20

15

10

5

0

80M 100M 200M 300M 400M 500M600M 800M 1G

Frequency [Hz]

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 21 (25)

Plot 5.2
Polarization: Horizontal

Marker: 1 GHz 0 -

EUT Nogo [-]

1.5

1.0

0.5

0.0

-0.5
80M100M 200M 300M 400M 500M600M 800M 1G

Frequency [Hz]

Marker: 1 GHz 2.965052 V/m

Immunity Level [V/m]

20

15

10

5

0

80M 100M 200M 300M 400M 500M600M 800M 1G

Frequency [Hz]

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 22 (25)

TEST EQUIPMENT AND ANCILLARIES USED FOR TESTS

No Instrument/Ancillary Manufacturer Type/Model Serial No.
1A Spectrum Analyzer Rohde & Schwarz ESIB 40 100107
1B Digital Radio Comm. Tester Rohde & Schwarz CMU 200 101821
1C Harmonic / Flicker tester Voltech PMI 304644
1 Spectrum Analyzer Rohde & Schwarz FSEM 30 826880/010
2 Digital Radio Comm. Tester Rohde & Schwarz CMD 55 847958/008
5 Audio Analyzer Rohde & Schwarz UPL 16 838205/005
6 Signal Generator Rohde & Schwarz SMY02 836878/011
7 Power Meter Rohde & Schwarz NRVD 836875/020
8 10V Insertion Unit 50ohm Rohde & Schwarz URV5-Z2 836029/034
9 10V Insertion Unit 50ohm Rohde & Schwarz URV5-Z2 836029/035
10 Power Amplifier Amplifier Research 250W1000 300031
11 Power Amplifier Amplifier Research 3051G3 29254
12 Power Amplifier Amplifier Research 100A 250AM1 28835
13 Climatic Chamber Votsch VT4004 G1115
14 Programmable AC Source Chroma 6520 2098
15 LISN Rohde & Schwarz ESH 3-Z6 836154/011
16 LISN Rohde & Schwarz ESH3-Z5 836679/003
17 Vertical Coupling Plane Amplifier Research 28259
18 Immunity Tester Amplifier Research UCS 500 M4 28256
19 ESD Gun Amplifier Research 28256
20 Power Splitter Hewlett Packard 11667B 645348
21 Pre-Amplifier Miteq JS4-00102600 00616
22 Pre-Amplifier Miteq AFS4-00101 800-55-LN
23 Notch Filter-1 Weinschel System integrated
24 Notch Filter-2 Weinschel System integrated
25 Notch Filter-3 Weinschel System integrated
22 High Pass Filter Trilithic Inc. 5HC2700 9926013
23 High Pass Filter Trilithic Inc. 5HC2700 9926014
24 High Pass Filter Trilithic Inc. 4HC1600 9922307
25 High Pass Filter Trilithic Inc. 4HC1600 9922308
26 High Pass Filter-1 Weinschel System integrated --­27 High Pass Filter-2 Weinschel System integrated --­28 DC Power Supply Hewlett Packard E3610A KR83021224
29 DC Power Supply Hewlett Packard E3610A KR83023316
30 Attenuator JFW Industries 50FHE-006-200 319740 0051
31 Attenuator NARDA 776B-10 5173
32 Attenuator NARDA 770B-10 --­33 Attenuator Weinshel Corp. 1433-3 MG678
34 V-Network Rohde & Schwarz --- 836154/04
35 Reference Impd. Network Voltech IEC Standard 555 IB27/2233
36 Power Sensor Rhode & Schwarz URV5-Z2 DE30807
37 Power Sensor Rhode & Schwarz URV5-Z2 DE30808

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 23 (25)

No Instrument/Ancillary Manufacturer Type/Model Serial No.

38 Log periodic Antenna EMCO 3148 1186
39 Log periodic Antenna EMCO 3148 1187
40 Biconical Antenna EMCO 3109 0005-3250
41 Biconical Antenna EMCO 3110B 0004-3356
42 Biconical Antenna EMCO 3110B 0004-3357
43 Biconilog Antenna EMCO 3141 0005-1186

44 Horn Antenna Amplifier Research AT4002A 29068
45 Horn Antenna AH Systems SAS-200/571 325
46 Horn Antenna AH Systems SAS-200/571 326
47 Horn Antenna AH Systems SAS-200/572 141
48 Coupling Clamp 125W FCC F-2031-23mm 335
49 Coupling Clamp Amplifier Research --- 28256
50 Decoupling Clamp FCC F-2031-DCN-23mm 111
51 Calibration Fixture FCC F-2031-CF-23mm 350
52 Calibration Fixture FCC F-BCICF-4 185
53 CDN FCC FCC-801-S25 2074
54 CDN FCC FCC-801-M2-32A 2056
55 CDN FCC FCC-801-S9 2076
56 CDN FCC FCC-801-C1-BNC-50 2026
57 CDN FCC FCC-801-M3-32A 20100
58 CDN FCC FCC-801-T4 2047
59 CDN FCC FCC-801-S15 2075
60 CDN FCC FCC-801-T2 2048
61 Isotropic Field Probe Holaday HI6005 105107
62 Current Probe 10K-500M FCC F-52 105
63 Current Probe 10K-230M FCC F-120-9A 232
64 Probe Set (9K-1G) Rohde & Schwarz H2-14.1026.7744.02 832655/0013
65 Passive Impd. Adaptor FCC FCC-801-150-50CDN 20155
66 Passive Impd. Adaptor FCC FCC-801-150-50CDN 20156
67 Passive Impd. Adaptor FCC FCC-801-150-50CDN 20161
68 Passive Impd. Adaptor FCC FCC-801-150-50CDN 20162
69 Passive Impd. Adaptor FCC FCC-801-150-50CDN 20163
70 Passive Impd. Adaptor FCC FCC-801-150-50CDN 20164
71 Passive Impd. Adaptor FCC FCC-801-150-50CDN 20165
72 Passive Impd. Adaptor FCC FCC-801-150-50CDN 20166

73 Audio Box TS-SBOX Rohde & Schwarz 1119.4815.02 338968/001

74 Acoustic Calibrator Bruel & Kjaer 4231 2253349
75 Mouth Simulator Bruel & Kjaer 4227 2255310
76 Telephone test head Bruel & Kjaer 4602B 2255251
77 Probe Microphone Bruel & Kjaer 4182 1510112
78 Nexus Conditioning Ampl. Bruel & Kjaer --- 2039582

79 Microphone Bruel & Kjaer 2669 2039582
80 System Control Interface Unit Rohde & Schwarz SCIU 338802/003
81 Directional Coupler Unit Rohde & Schwarz DCU 338965/001

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 24 (25)

PHOTOGRAPHS

Radiated Immunity

Radiated Emissions

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 25 (25)

ESD