Dear Valued Customer,
We wish you to get the best results from your product that has been manufactured meticulously at modern plants
and tested with detailed quality control checks.
For this reason, we recommend that you read this user manual thoroughly before starting the product. If you hand
over the product to someone else, please remember to give the user manual as well.
This manual will help you use your appliance in a fast and safe way.
• Please read this user manual carefully before installing and using the product.
• Always follow the applicable safety instructions.
• Keep the user manual in an easily accessible place for further use.
• Please read all the other documents provided with the product.
Please keep in mind that this manual may apply to several product models. This manual expressly indicates the
differences between various models.
C
A
B
Important information and
useful hints.
Risk of injury and property
damage.
Risk of electric shock.
Packaging materials of
this product has been
manufactured from recyclable
materials in accordance with
the National Environment
Regulations.
INFORMATION
C
SUPPLIER’S NAME
A
MODEL IDENTIFIER
The model information as stored in the product data base
can be reached by entering following website and searching
for your model identifier (*) found on energy label.
(*)
https://eprel.ec.europa.eu/
1 Important Instructions Regarding Safety and
Environment 4
1 Important Instructions Regarding Safety and Environment
This chapter contains safety information
that will help you avoid the risk personal
injury or property damage. Failure to
follow these instructions shall render any
product warranty void.
Intended use
WARNING:
Keep ventilation openings, in
A
the appliance enclosure or in
the built-instructure, clear of
obstruction.
WARNING:
Do not use mechanical
devices or other means to
A
accelerate the defrosting
process, other than those
recommended by the
manufacturer.
WARNING:
A
Do not damage the refrigerant
circuit.
WARNING:
Do not use electrical
appliances inside the food
A
storage compartments of the
appliance, unless they are of
the type recommended by the
manufacturer.
This appliance is intended to be used in
household and similar applications such
as
– staff kitchen areas in shops, offices and
other working environments;
– farm houses and by clients in hotels,
motels and other residential type
environments;
– bed and breakfast type environments;
– catering and similar non-retail
applications.
1.1. General Safety
• Persons with physical, sensory or
mental disabilities; persons who
lack experience and information and
children should not approach, enter or
play with the product.
• Failure to follow the instructions and
uncontrolled use of the product lead to
dangerous results!
• Unplug the product if you encounter a
failure during use.
• If the product malfunctions, it must
not be operated until repaired by the
authorised service provider. Risk of
electric shock!
• Plug the product into a grounded
socket protected by a fuse that
corresponds to the value on its
nameplate. Have a qualified electrician
ground the product. Our company
cannot be held responsible for
damages resulting from the failure to
use the product with a grounded socket
pursuant to local regulations.
• Unplug the product when not in use.
• Never wash the product by spreading
or pouring water onto it! Risk of electric
shock!
• Never touch the plug with wet hands!
• Never unplug the product by pulling the
cable. Always pull the plug by holding
the socket.
4 /35 EN
Refrigerator / User Guide
Safety and environment instructions
• Do not plug the refrigerator if the wall
socket is loose.
• Never connect your refrigerator to
energy saving devices. Such systems
are harmful to your product.
• Unplug the product during
installation, care, cleaning and
repairing procedures.
• Always have the Authorised Service
Provider install the product and
establish its electrical connections.
The manufacturer cannot be held
responsible for damages caused
by procedures performed by
unauthorised persons.
• Do not eat cone ice cream or ice
cubes immediately after you take
them out of the freezer compartment!
This may cause frostbite in your
mouth!
• Do not touch frozen food with wet
hands! They may stick to your hand!
• Do not put bottled or canned
liquid beverages in the freezer
compartment. They may burst!
• Never use steam or steam cleaners
to clean or defrost the refrigerator.
Steam gets into contact with the live
parts in your refrigerator, causing
short circuit or electric shock!
• Do not use mechanical devices
or other means to accelerate the
defrosting process other than those
recommended by the manufacturer.
• Never use the parts in your
refrigerator such as the door and
drawer as a means of support or
step. This may cause the product to
tip over or damage the parts of it.
• Do not damage the parts where the
refrigerant is circulating with drilling
or cutting tools. The refrigerant
that might blow out when the gas
Refrigerator / User Guide
• Do not cover or block the ventilation
• Place the beverage with higher proofs
• Do not use gaseous sprays near the
• Flammable items or products that
• Do not place vessels filled with liquid
• Do not store items that need precise
• If you are not going to use the product
• If there is a blue light on the
• Exposing the product to rain, snow,
• In products with mechanical control
• Do not overload the refrigerator.
5/35EN
channels of the evaporator, pipe
extensions or surface coatings are
punctured causes skin irritations and
eye injuries.
holes in your refrigerator with any
object.
tightly closed and vertically.
product since there is the risk or fire
or explosion!
contain flammable gases (e.g. spray)
as well as explosive materials should
never be kept in the appliance.
onto the product. Splashing water on
an electrical part may cause electric
chock or the risk of fire.
temperature adjustment (such as
vaccines, heat-sensitive medication,
science materials etc.) in the
refrigerator.
for a long time, unplug it and remove
the food in it.
refrigerator, do not look at this light
with optical tools.
sun or wind is dangerous in terms of
electrical safety.
(thermostat), wait for 5 minutes
to plug in the product again after
unplugging.
Objects in the refrigerator may fall
down when the door is opened,
causing injury or damage. Similar
Safety and environment instructions
problems may arise if any object is
placed onto the product.
• If the product has a door handle, do
not pull the handle when re-locating
the product. The handle might be
loose.
• Be careful not to jam your hand or
any other body part in the moving
parts of the refrigerator.
• Do not put your hand or any other
foreign materials into the ice
machine while it is operating.
1.1.1 Hydrocarbon (HC) Warning
• If your product's cooling system
contains R600a:
This gas is flammable. Therefore, pay
attention not to damage the cooling
system or the piping during use and
transportation. If damaged, keep
the product away from potential fire
sources that may cause it to catch
fire and ventilate the room where the
product is placed.
If the product is damaged and
if you see gas leak, please
keep away from the gas. It may
C
cause frostbite when it gets into
contact with the skin.
(including R134)
Ignore this warning if the cooling
system of your product contains
C
R134a.
Type of gas used in the product
is stated on the type plate which
C
is on the left wall inside the
refrigerator.
1.1.2 For Products with a Water
Dispenser/Ice Machine
• Pressure for cold water inlet shall
• If there is a risk of water impact
• Do not make installation on the hot
• Use drinking water only.
• Take the necessary measures
WARNING:
Never throw the product into fire
A
for disposal.
be maximum 90 psi (620 kPa). If
your water pressure exceeds 80 psi
(550 kPa), use a pressure limiting
valve in your mains system. If you
do not know how to check your
water pressure, ask for the help of a
professional plumber.
in your installation, always use a
water impact protection equipment
in that installation. Please consult
professional plumbers if you are not
sure if there is water impact in your
installation.
water inlet.
against the freezing risk of the
hoses. The water temperature
operating range must be 0.6°C
(33°F) minimum and 38°C (100°F)
maximum.
WARNING:
Never connect the product
to a cold water mains with a
A
pressure of 550 kPa (80 psi)
or above.
6 /35EN
Refrigerator / User Guide
Safety and environment instructions
1.2. Intended Use
• This product has been designed for
domestic use. It is not suitable for
commercial use and it must not be
used out of its intended use.
• It must be used only for storing
food.
• The manufacturer will not take any
responsibility for damages resulting
from improper use or transport.
• Original spare parts will be available
for 10 years after the purchase date
of the product.
1.3. Children's Safety
• If there is a lock on the door of the
product, the key should be kept out
of the reach of children.
• Do not let children play with the
product.
DANGER:
Before disposing your old
refrigerator or freezer:
• Children may get locked
inside.
• Remove the doors.
A
• Leave the shelves to
prevent children from
getting inside the product
easily.
1.4. Compliance with the WEEE Directive
and Disposing the Waste Product:
reused and are suitable for recycling. Therefore,
do not dispose the product with normal domestic
waste or other waste at the end of its service life.
Take it to a collection centre for recycling electrical
and electronic equipment. Please consult local
authorities to learn about the locations of such
collection centres.
1.5. Compliance with the RoHS Directive:
The unit you have purchased conforms to the EU
RoHS Directive (2011/65/EU). It does not contain
harmful or prohibited materials specified in the
Directive.
1.6. Packaging Information
• Packaging materials of the product have been
A
This product conforms to the EU
WEE Directive (2012/19 EU). This
product bears a classification symbol
for waste electrical and electronic
equipment (WEEE). This product has
been manufactured from high quality
parts and materials which can be
manufactured from recyclable materials in
accordance with our National Environment
Regulations. Do not dispose the packaging
materials with normal domestic waste or other
types of waste. Take these materials to a
recycling point designated by local authorities.
DANGER:
Risk of Fire or Explosion:
• This product uses flammable
refrigerant.
• Do not use mechanical devices to
defrost the refrigerator.
• Do not use chemicals for cleaning.
• Do not pierce the refrigerant pipe.
• If the refrigerant pipe is pierced, it
must be repaired only by licensed
service personnel.
• Please consult the repair/user
manual before cleaning the product.
All safety instructions must be
followed.
• Dispose the product according to
federal or local regulations.
Refrigerator / User Guide
7/35EN
8 /35 EN
Refrigerator / User Guide
1.Cooler compartment door shelf
2.Water dispenser filling tank
3.Egg section
4.Water dispenser reservoir
5.Bottle shelf
6. Sliding storage box
7.Adjustable legs
8.Deep freezer compartment
9.Quick freeze compartment
10.Ice cube tray & Ice bank
11.Vegetable bin
12.Zero degree compartment
13.Interior light
14.Cooler compartment glass shelf
15.Temperature adjustment button
16.Cooler compartment
17.Freezer compartment
2 Your Refrigerator
C
*optional: Pictures given in this manual are given as example figures and they may not be exactly
the same as your product. If your product does not comprise the relevant parts, the information pertains to other models.
*1
*2
*3
*4
*5
*5
*6
*8
*9
7
*11
*12
13
*15
16
17
*14
*10
*4
May not be available in all models
3 Installation
3.1. Right place for installation
Contact the Authorized Service for the product's
installation. To ready the product for installation, see
the information in the user guide and make sure the
electric and water utilities are as required. If not, call
an electrician and plumber to arrange the utilities as
necessary.
WARNING: The manufacturer assumes
B
no responsibility for any damage caused
by the work carried out by unauthorized
persons.
WARNING: The product’s power cable
B
must be unplugged during installation.
Failure to do so may result in death or
serious injuries!
WARNING: If the door span is too narrow
A
• Place the product on a flat surface to avoid vibration.
• Place the product at least 30 cm away from the
heater, stove and similar sources of heat and at least
5 cm away from electric ovens.
• Do not expose the product to direct sunlight or keep
in damp environments.
• The product requires adequate air circulation to
function efficiently.
• If the product will be placed in an alcove, remember
to leave at least 5 cm distance between the product
and the ceiling and the walls.
• Do not install the product in environments with
temperatures below -5°C.
for the product to pass, remove the door
and turn the product sideways; if this does
not work, contact the authorized service.
• Your product requires adequate air circulation to
function efficiently. If the product will be placed in an
alcove, remember to leave at least 5 cm clearance
between the product and the ceiling, rear wall and
the side walls.
• If the product will be placed in an alcove, remember
to leave at least 5 cm clearance between the product
and the ceiling, rear wall and the side walls. Check
if the rear wall clearance protection component is
present at its location (if provided with the product). If
the component is not available, or if it is lost or fallen,
position the product so that at least 5 cm clearance
shall be left between the rear surface of the product
and the wall of the room. The clearance at the rear is
important for efficient operation of the product.
3.2. Attaching the plastic wedges
Use the plastic wedges in the provided with the product
to provide sufficient space for air circulation between the
product and the wall.
1.
To attach the wedges, remove the screws on the product
and use the screws provided with the wedges.
2.
Attach 2 plastic wedges on the ventilation cover as shown
in the figure.
3.3. Adjusting the stands
If the product is not in balanced position, adjust the front
adjustable stands by rotating right or left.
3.4. Power connection
A
B
WARNING: Do not use extension or multi
sockets in power connection.
WARNING: Damaged power cable must
be replaced by Authorized Service.
When placing two coolers in adjacent
position, leave at least 4 cm distance
C
between the two units.
• Our firm will not assume responsibility for any
damages due to usage without earthing and power
connection in compliance with national regulations.
• The power cable plug must be easily accessible
after installation.
• Do not use multi-group plug with or without
extension cable between the wall socket and the
refrigerator.
Hot Surface Warning!
Side walls of your product is equipped
with refrigerant pipes to improve the
cooling system. Refrigerant with high
temperatures may flow through these
C
areas, resulting in hot surfaces on the
side walls. This is normal and does not
need any servicing. Please pay attention
while touching these areas.
Refrigerator / User Guide
9/35EN
Installation
3.5. Reversing the doors
Proceed in numerical order .
6
45
1
9
3
2
5
7
21
16
11
4
8
9
10
12
13
19
20
18
17
15
14
10 /35EN
20
Refrigerator / User Guide
Installation
3.6. Reversing the doors
Proceed in numerical order .
(8)(13)
1
1
1
7
20
6
2
14
45 °
5
11
13
9
4
3
10
20
12
8
180°
15
20
19
Refrigerator / User Guide
16
18
17
11/35EN
4 Preparation
4.1. What to do for energy saving
Connecting the product to electronic
A
• For a freestanding appliance; ‘this refrigerating
• Do not keep the refrigerator doors open for long
• Do not place hot food or beverages into the
• Do not overfill the refrigerator; blocking the internal
• In order to store the maximum amount of food into
• You should not block the airflow by putting food in
• Depending on the product’s features; defrosting
• Food should be stored using the drawers in the
• Food packages should not be in direct contact with
• Make sure the foods are not in contact with the
• Since hot and humid air will not directly penetrate
energy-saving systems is harmful, as it
may damage the product.
appliance is not intended to be used as a built-in
appliance’ ;.
periods.
refrigerator.
air flow will reduce cooling capacity.
the cooler compartment of your refrigerator, you
should take out the upper drawers and place it onto
the glass rack. The declared energy consumption of
your refrigerator was determined by taking out the
cooler, ice tray and upper drawers in a way that will
enable maximum storage. Using the below drawer
when storing is strongly recommended. Energy
saving function should be activated for best energy
consumption.
front of the cooler fan. A space of minimum 3cm
must be left in front of the protective fan wire when
placing food.
frozen foods in the cooler compartment will ensure
energy saving and preserve food quality.
cooler compartment in order to ensure energy
saving and protect food in better conditions.
the heat sensor located in the cooler compartment.
If they are in contact with the sensor, energy
consumption of the appliance might increase.
cooler compartment temperature sensor described
below.
into your product when the doors are not opened,
your product will optimize itself in conditions
sufficient to protect your food. Functions and
components such as compressor, fan, heater,
defrost, lighting, display and so on will operate
according to the needs to consume minimum
energy under these circumstances.
4.2. First Use
Before using your refrigerator, make sure the necessary
preparations are made in line with the instructions in
“Safety and environment instructions” and “Installation”
sections.
• Keep the product running with no food inside for
6 and do not open the door, unless absolutely
necessary.
A sound will be heard when the
C
compressor is engaged. It is normal to
hear sound even when the compressor is
inactive, due to the compressed liquids and
gasses in the cooling system.
Front edges of the product might heat
C
up. This is normal. These areas are
designed to warm up in order to prevent
condensation.
In some models indicator panel turns off
C
automatically 5 minutes after the door
closes. It will be reactivated when the door
is open or any button is pressed.
12 /35 EN
Refrigerator / User Guide
5 Using the product
5.1. Indicator panel
Indicator panel allows you to set the temperature and control the other functions related to the product
without opening the door of the product. Just press the inscriptions on relevant buttons for function settings.
1 2
*10
*12
11
1.Power Failure / High temperature / Error
status indicator
This indicator ( ) illuminates in case of power failure,
high temperature and error warnings.
When the temperature of the freezer compartment
is heated up to a critical level for the frozen food, the
maximum value reached by the freezer compartment
temperature flashes on the digital indicator.
Check the food in the freezer compartment.
This is not a malfunction. The warning may be deleted
by pressing any button or on high temperature alarm
off button. (Cancelling by pressing any button is not
applicable for every model.)
This indicator () illuminated when a sensor failure
occurs, too. When this indicator is illuminated, “E” and
figures such as “1,2,3...” are displayed alternatively
on the temperature indicator. These figures on the
indicator inform the service personnel about the error.
May not be available in all models
*Optional: The figures in this user guide are intended as drafts and may not perfectly match
C
your product. If your product does not comprise the relevant parts, the information pertains to
other models.
6
789
2. Energy saving function (display off):
If the product doors are kept closed for a long time
energy saving function is automatically activated
and energy saving symbol is illuminated. ()
When energy saving function is activated, all
symbols on the display other than energy saving
symbol will turn off. When the Energy Saving
function is activated, if any button is pressed or
the door is opened, energy saving function will be
canceled and the symbols on display will return to
normal.
Energy saving function is activated during delivery
from factory and cannot be canceled.
3.Quick fridge function
The button has two functions. To activate or
deactivate the quick cool function press it briefly.
Quick Cool indicator will turn off and the product
will return to its normal settings. ( )
45
3
Refrigerator / User Guide
13/35EN
Using the product
Use quick cooling function when you
C
want to quickly cool the food placed
in the fridge compartment. If you want
to cool large amounts of fresh food,
activate this function before putting the
food into the product.
If you do not cancel it, quick cooling
C
will cancel itself automatically after 1
hours or when the fridge compartment
reaches to the required temperature.
If you press the quick cooling button
C
repeatedly with short intervals, the
electronic circuit protection will be
activated and the compressor will not
start up immediately.
This function is not recalled when
C
power restores after a power failure.
4. Fridge compartment temperature setting
button
Press this button to set the temperature of the fridge
compartment to 8, 7,6, 5,4,3, 2, 8... respectively.
Press this button to set the fridge compartment
temperature to the desired value. ()
5.Vacation Function
In order to activate vacation function, press the this
button ( ) for 3 seconds, and the vacation mode
indicator () will be activated. When the vacation
function is activated, “- -” is displayed on the fridge
compartment temperature indicator and no active
cooling is performed on the fridge compartment.
It is not suitable to keep the food in the fridge
compartment when this function is activated. Other
compartments shall be continued to be cooled as
per their set temperature.
To cancel this function press Vacation function
button again.
6. Termination of the High Temperature
Warning:
In case of power failure/high temperature warning,
you may delete the warning ( ) by pressing any
button on the indicator or high temperature alarm
off button for 1 second after checking the food
inside the freezer compartment.
Note: Cancelling by pressing any button is not
applicable for every model.
7. Key lock
Press key lock button ( ) simultaneously for 3
seconds. Key lock symbol
( ) will light up and key lock mode will be activated.
Buttons will not function if the Key lock mode is
active. Press key lock button simultaneously for 3
seconds again. Key lock symbol will turn off and the
key lock mode will be exited.
Press the key lock button if you want to prevent
changing of the temperature setting of the
refrigerator ( ).
8. Eco fuzzy
Press and hold eco fuzzy button for 1 seconds to
activate eco fuzzy function. Refrigerator will start
operating in the most economic mode at least 6
hours later and the economic usage indicator will
turn on when the function is active ( ). Press
and hold eco fuzzy function button for 3 seconds to
deactivate eco fuzzy function.
This indicator is illuminated after 6 hours when eco
fuzzy is activated.
9. Freezer compartment temperature setting
button
Press this button to set the temperature of the
freezer compartment to -18,-19,-20,-21, -22, -23,24, -18... respectively. Press this button to set the
freezer compartment temperature to the desired
value.( )
10. Icematic off indicator
Indicates whether the icematic is on or off. ()
If On, then the icematic is not operating. To operate
the icematic again press and hold the On-Off button
for 3 seconds.
Water flow from water tank will
C
stop when this function is selected.
However, ice made previously can be
taken from the icematic.
11. Quick freeze function button/ icematic
on-off button
Press this button to activate or deactivate the quick
freezing function. When you activate the function,
the freezer compartment will be cooled to a
temperature lower than the set value. ()
To turn on and off the icematic press and hold it for
3 seconds.
14 /35EN
Refrigerator / User Guide
Using the product
Use the quick freeze function when you
C
want to quickly freeze the food placed
in fridge compartment. If you want to
freeze large amounts of fresh food,
activate this function before putting the
food into the product.
If you do not cancel it, Quick Freeze
C
will cancel itself automatically after 4
hours or when the fridge compartment
reaches to the required temperature.
This function is not recalled when
C
power restores after a power failure.
12. Economic usage indicator
Indicates that the product is running in energyefficient mode. ()This indicator will be active if
the Freezer Compartment temperature is set to -18
or the energy efficient cooling is being performed
due to Eco-Extra function.
Economic usage indicator is turned
C
off when quick cooling or quick freeze
functions are selected.
5.2. Ice bucket
*optional
• Tak e th e ic e buc ke t fr om the f re ez er
compartment.
• Fill the ice bucket with water.
• Place the ice bucket into the freezer
compartment.
• The ice will be ready after approximately
two hours. Take the ice bucket from
the freezer compartment and bend in
sightly over the holder that you are going
to serve. Ice will easily pour into
the serving holder.
5.3. Eggholder
You can put the eggholder on the door or body rack of
your choice. If you decide to put it on the body rack, it is
recommended to prefer the shelves below as they are
colder.
A
Do not put the eggholder into the
freezer compartment.
5.4. Fan
Fan was designed to distribute circulate the cold air
inside your refrigerator homogeneously. Operating
time of the fan might vary depending the features of
your product.
While in some products fan only operates with
compressor, in others control system determines the
operating time based on the need for cooling.
5.5. Vegetable bin
*optional
Product’s vegetable bin is designed to keep
vegetables fresh by preserving humidity. For
this purpose, the overall cold air circulation is
intensified in the vegetable bin.
5.6. Zero degree compartment
*optional
Use this compartment to keep delicatessen at
lower temperatures or meat products for immediate
consumption.
Zero degree compartment is the coolest place
where foods such as dairy products, meat, fish and
chicken can be stored in ideal storage conditions.
Vegetables and/or fruits should not be stored in this
compartment.
Refrigerator / User Guide
15/35EN
Using the product
16 /35EN
Refrigerator / User Guide
5.7.Using the second crisper of the product;
Figure 1.
As shown in the figure, there are 2 stoppers in the second crisper of K70560 model product.
Figure 3.
With the door is open 90°, pull the second crisper up to the first stopper as shown in Figure 3.
In the case that the drawer is more open, first of all, open the door by at least 135° degrees.After that, as shown in Figure 4, lift the second crisper for about 5 mm so that it is freed from the first stopper.
Figure 4.
After lifting, pull the second drawer up to the second stopper as shown in Figure 5.
Figure 2.
The second crisper looks like Figure 2 when closed.
Figure 5.
Using the product
5.8. Moving door rack
*optional
Moving door rack can be fixed in 3 different
positions.
In order to move the rack, push the buttons on
the side evenly. Rack will be movable.
Move the rack up or down.
When the rack is in the position that you want,
release the buttons. Rack will be fixed again
in the position where you have released the
buttons.
5.9. Sliding storage box
*optional
This accessory has been designed to increase the
usage volume of the door racks.
Thanks to its ability to move sideways, it enables you
to easily place long bottle, jar or boxes that you put
in the bottle rack below.
5.10. Moisture controlled vegetable bin
*optional
With moisture control feature, moisture rates of
vegetables and fruits are kept under control and
ensures a longer freshness period for foods.
It is recommended to store leafed vegetables such
as lettuce and spinach and similar vegetables prone
to moisture loss not on their roots but in horizontal
position into the vegetable bin as much as possible.
When placing the vegetables, place heavy and hard
vegetables at the bottom and light and soft ones on
the top, taking into account the specific weights of
vegetables.
Do not leave vegetables in the vegetable bin in
plastic bags. Leaving them in plastic bags causes
vegetables to rot in a short time. In situations where
contact with other vegetables is not preferred,
use packaging materials such as paper that has a
certain porosity in terms of hygiene.
Do not put fruits that have a high ethylene gas
production such as pear, apricot, peach and
particularly apple in the same vegetable bin with
other vegetables and fruits. The ethylene gas coming
out of these fruits might cause other vegetables and
fruits to mature faster and rot in a shorter period of
time.
Refrigerator / User Guide
17/35EN
Using the product
5.11. Deodoriser Module
(FreshGuard) *optional
The deodoriser module quickly eliminates the bad
smells in your refrigerator before they permeate the
surfaces. Thanks to this module, which is placed
on the ceiling of the fresh food compartment, the
bad odours dissolve while the air is actively being
passed on the odour filter, then the air that has
been cleaned by the filter is re-emitted to the fresh
food compartment. This way, the unwanted odours
that may emerge during the storage of foods in the
refrigerator are eliminated before they permeate the
surfaces.
This is achieved thanks to the fan, LED and the
odour filter integrated into the module. In daily use,
the deodoriser module will turn on automatically on
a periodic basis. To maintain efficient performance, it
is recommended to have the filter in the deodoriser
module by the authorised service provider every 5
years. Due to the fan integrated into the module, the
noise you will hear during operation is normal. If you
open the door of the fresh food compartment while
the module is active, the fan will pause temporarily
and resume where it has left off after some time
the door is closed again. In case of power failure,
the deodoriser module will resume where it has left
off in the total operation duration once the power is
back.
Info: It is recommended to store aromatic foods
(such as cheese, olives and delicatessen foods) in
their packaging and sealed to avoid bad odours that
may result when smells of various foods get mixed.
Besides, it is recommended to take spoiled foods
out of the refrigerator quickly to prevent the other
foods from getting spoiled and avoid bad odours.
5.12. Automatic ice machine
*optional
Automatic ice machine enables you to easily make
ice in your refrigerator. In order to obtain ice from
the ice machine, take out the water tank in the
cooler compartment, fill it with water and fix it back.
First ice will be ready in about 2 hours in the ice
machine drawer in the cooler compartment.
After placing the full water tank, you can obtain
about 60-70 cubes of ice until it is fully empty.
If the water in the tank has waited for 2-3 weeks, it
should be changed.
In products with automatic ice
C
machine, you might hear a sound
when pouring the ice. This sound is
normal and is not a sign of failure.
18 /35EN
Refrigerator / User Guide
Using the product
5.13. Icematic and ice storage container
*optional
Using the Icematic
Fill the Icematic with water and place it into its seat.
Your ice will be ready approximately in two hours. Do
not remove the Icematic from its seating to take ice.
Turn the knobs on the ice reservoirs clockwise by
90 degrees.
Ice cubes in the reservoirs will fall down into the ice
storage container below.
You may take out the ice storage container and
serve the ice cubes.
If you wish, you may keep the ice cubes in the ice
storage container.
Ice storage container
Ice storage container is only intended for
accumulating the ice cubes. Do not put water in it.
Otherwise, it will break.
5.14. Using the water dispenser
*optional
It is normal for the first few glasses of
C
water taken from the dispenser to be
warm.
If the water dispenser is not used for a
C
long period of time, dispose of first few
glasses of water to obtain fresh water.
1. Push in the lever of the water dispenser with your
glass. If you are using a soft plastic cup, pushing
the lever with your hand will be easier.
2. After filling the cup up to the level you want, release the lever.
Refrigerator / User Guide
19/35EN
Please note, how much water flows
C
from the dispenser depends on how far
you depress the lever. As the level of
water in your cup / glass rises, gently
reduce the amount of pressure on the
lever to avoid overflow. If you slightly
press the arm, the water will drip; this
is quite normal and not a failure.
Using the product
5.15. Filling the water dispenser's tank
Water tank filling reservoir is located inside the door
rack.
1. Open the cover of the tank.
2. Fill the tank with fresh drinking water.
3. Close the cover.
5.16. Cleaning the water tank
1. Remove the water filling reservoir inside the door
rack.
2. Remove the door rack by holding from both sides.
3. Grab the water tank from both sides and remove
it with an angle of 45°C.
4. Remove the cover of the water tank and clean
the tank.
Components of the water tank and
C
water dispenser should not be washed
in dishwasher.
Do not fill the water tank with any
C
other liquid except for water such as
fruit juices, carbonated beverages or
alcoholic drinks which are not suitable
to use in the water dispenser. Water
dispenser will be irreparably damaged
if these kinds of liquids are used.
Warranty does not cover such usages.
Some chemical substances and
additives contained in these kinds of
drinks/liquids may damage the water
tank.
Use clean drinking water only.
C
Capacity of the water tank is 3 litres;
C
do not overfill.
20 /35EN
Refrigerator / User Guide
Using the product
5.17. Drip tray
Water that dripped while using the water dispenser
accumulates in the spillage tray.
Remove the plastic filter as shown in the figure.
With a clean and dry cloth, remove the water that
has accumulated.
5.18. HerbBox/HerbFresh
Remove the film container from HerbBox/
HerbFresh+
Take the film out of the bag and put it into the film
container as shown in the image.
Seal the container again and replace it into HerbBox/
HerbFresh+ unit.
HerbBox-HerbFresh+ sections are especially ideal
for storage of various herbs that are supposed to
be kept in delicate conditions. You can store your
unbagged herbs (parsley, dill, etc.) in this section
horizontally and keep them fresh for a much longer
period.
The film shall be replaced in every six months.
Refrigerator / User Guide
21/35EN
Using the product
5.19. Freezing fresh food
• To preserve food quality, the food items placed
in the freezer compartment must be frozen as
quickly as possible, use the rapid freezing for
this.
• Freezing the food items when fresh will extend
the storage time in the freezer compartment.
• Pack the food items in air-tight packs and seal
tightly.
• Make sure the food items are packed before
putting in the freezer. Use freezer holders, tinfoil
and damp-proof paper, plastic bag or similar
packaging materials instead of traditional
packaging paper.
Ice in the freezing compartment thaws
C
automatically.
• Mark each food pack by writing the date on the
package before freezing. This will allow you to
determine the freshness of each pack every
time the freezer is opened. Keep the earlier food
items in the front to ensure they are used first.
• Frozen food items must be used immediately
after defrosting and should not be frozen again.
• Do not free large quantities of food at once.
5.20. Recommendations for
storing frozen foods
The compartment must be set to at least -18°C.
1. Place the food items in the freezer as quickly
as possible to avoid defrosting.
2. Before freezing, check the “Expiry Date” on the
package to make sure it is not expired.
3. Make sure the food’s packaging is not
damaged.
Freezer
Compartment
Temperature
Setting
-18°C4°CThis is the default, recommended setting.
-20,-22 or
-24°C
Quick Freeze4°C
-18°C or colder2°C
Cooler
Compartment
Temperature
Setting
4°C
Details
These settings are recommended for ambient temperatures exceeding
30°C.
Use when you want to freeze your food in a short time. When the process
ends, the product will regain its position.
Use these settings if you believe the cooler compartment is not cold enough
due to ambient temperature or frequently opening the door.
22 /35EN
Refrigerator / User Guide
Using the product
5.21. Deep freezer details
As per the IEC 62552 standards, the freezer must
have the capacity to freeze 4,5 kg of food items at
-18°C or lower temperatures in 24 hours for each
100 litres of freezer compartment volume.
Food items can only be preserved for extended
periods at or below temperature of -18°C .
You can keep the foods fresh for months (in deep
freezer at or below temperatures of 18°C ).
The food items to be frozen must not contact the
already-frozen food inside to avoid partial defrosting.
Boil the vegetables and filter the water to extend
the frozen storage time. Place the food in air-tight
packages after filtering and place in the freezer.
Bananas, tomatoes, lettuce, celery, boiled eggs,
potatoes and similar food items should not be
frozen. In case this food rots, only nutritional values
and eating qualities will be negatively affected. A
rotting threatening human health is not in question.
5.22. Placing the food
Freezer
compartment
shelves
Cooler
compartment
shelves
Cooler
compartment
door shelves
Vegetable binFruits and vegetables
Fresh food
compartment
5.23. Door open alert
(Optional)
An audible alert will be heard if the product's door
remains open for at least 1 minute. The audible alert
will stop when the door is closed or any button on
the display (if available) is pressed.
Various frozen goods including
meat, fish, ice cream, vegetables
etc.
Food items inside pots, capped
plate and capped cases, eggs (in
capped case)
Small and packed food or beverages
Delicatessen (breakfast food, meat
products to be consumed in short
notice)
Door open alert is indicated to the user both audibly
and visually. Interior lighting will turn of if the
warning continues for 10 min.
5.24. Changing the opening
direction of the door
You can change the direction of opening of your refrigerator depending on the location where you use it.
When you need this, consult the closest Authorized
Service.
The explanation above is a general statement. You
should check the warning tag located inside the product package about the changeability of direction of
the door.
5.25. Interior light
Interior light uses a LED type lamp. Contact the
authorized service for any problems with this lamp.
Lamp(s) used in this appliance cannot be used for
house lighting. Intended use of this lamp is to help
the user place food into the refrigerator / freezer
safely and comfortably.
Refrigerator / User Guide
23/35EN
6 Care and Cleaning
Service life of the product will extend and frequently
encountered problems will decrease if the product is
cleaned periodically.
B
WARNING: Switch off the product
before cleaning.
WARNING: It is recommended to
B
clean the condenser every six months
using gloves. You must not use
vacuum cleaners.
• Never use gasoline, benzene or similar substances
for cleaning purposes.
• Never use any sharp abrasive instruments, soap,
household cleaners, detergent or wax polish for
cleaning.
• Dissolve one teaspoon of carbonate in half liter
of water. Soak a cloth in the solution and wring it
thoroughly. Wipe the interior of the refrigerator with
this cloth and the dry thoroughly.
• Make sure that no water enters the lamp housing or
other electrical parts.
• If you will not use the refrigerator for a long time,
unplug it, remove all food inside, clean it and leave
the door ajar.
• Check regularly that the door gaskets are clean. If
not, clean them.
• Take out all items in the product to remove the door
and body shelves.
• Remove the door shelves by pulling them up. Slide
the shelves downwards to re-install them after
cleaning.
• Never use chloric cleaning agents or water to
clean outer surfaces or chrome-coated parts of the
product. Chlorine causes abrasion on such metal
surfaces.
• For non-No Frost products, water drops and frosting
up to a fingerbreadth occur on the rear wall of the
Fridge compartment. Do not clean it; never apply oil
or similar agents on it.
• Only use slightly damp microfiber cloths to clean
the outer surface of the product. Sponges and other
types of cleaning cloths may scratch the surface.
6.1. Avoiding Bad Odours
Materials that may cause odour are not used in the
production of our refrigerators. However, odour may be
emitted if foods are stored improperly or if the inner
surface of the product is not cleaned as required. Please
consider the following to avoid this problem:
• It is important that the refrigerator is kept clean.
Food residuals, stains, etc. can cause odour. For
this reason, clean your refrigerator with carbonate
solved in water every 15 days. Never use detergents
or soap.
• Keep your foods in closed vessels. Microorganisms
emitted from vessels without a cover may cause
unpleasant odours.
• Never keep expired or spoiled foods in your
refrigerator.
6.2. Protection of plastic surfaces
Do not put liquid oils or oil-cooked meals in your
refrigerator in unsealed containers as they damage
the plastic surfaces of your refrigerator. If oil is spilled
or smeared onto the plastic surfaces, clean and rinse
the relevant part of the surface with warm water
immediately.
6.3. Cleaning the Inner Surface
To clean the inner surfaces and all removable parts,
wash them with a mild solution comprising soap, water
and carbonate. Rinse and dry thoroughly. Prevent the
water from contacting the lighting means and control
panel.
ATTENTION:
Do not use vinegar, rubbing
alcohol or other alcohol-based
A
cleaning agents on any of the
inner surfaces.
6.4. Stainless Steel Outer Surfaces
Use a stainless steel cleaning agent that is non-abrasive
and apply it with a lint-free, soft cloth. For polishing,
wipe the surface softly with a damp microfiber cloth and
use dry wash-leather. Always follow the strands of the
stainless steel.
24 /35 EN
Refrigerator / User Guide
6 Care and Cleaning
6.5. Cleaning Products with Glass Doors
Remove the protection foil on the glass.
There is a coating on the surface of the glass. This
coating minimises stain formation and ensures
that stains and dirt are cleaned easily. Glasses
that are not protected by a coating might be exposed
to permanent bonding of organic or inorganic, air or
waterborne pollutants such as limescale, mineral salts,
unburned hydrocarbons, metal oxides an silicons,
which lead to stains and physical damage in a short
time. Despite regular washing, the glass becomes very
hard to keep clean, though not impossible. As a result,
the clarity and good appearance of the glass reduces.
Hard and abrasive cleaning compounds and methods
increase these defects even further and accelerate the
deterioration process.
*Non-alkali, non-abrasive and water-based cleaning
products must be used for routing cleaning procedures.
For the coating to have long service life, alkali or
abrasive substances must not be used during cleaning
processes.
These glasses were subject to a tempering process to
increase their impact and breakage resistance.
As an additional safety measure, there is a safety film on
the back surfaces of the glasses to ensure that they will
not harm the environment in case of breakage.
Refrigerator / User Guide
25/35EN
7 Troubleshooting
Please review this list before calling the service. This will
save you time and money. This list contains frequently
encountered problems that are not results of faulty
workmanship or material use. Your product may not
have some of the features described here.
The refrigerator is not operating.
• It may not be plugged in properly. >>>Plug in the
product properly.
• The fuse of the socket to which your refrigerator
is connected or the main fuse may have blown.
>>>Check the fuse.
Condensation on the side wall of the fridge
compartment (MULTI ZONE, COOL CONTROL and
FLEXI ZONE).
• The door may have been opened/closed
frequently. >>>Do not open/close the refrigerator
door frequently.
• The environment may be too humid. >>>Do not
install the refrigerator at locations with a very high
level of humidity.
• Foods containing liquid may have been placed
into the refrigerator in vessels without covers.
>>>Do not place foods containing liquid into the
refrigerator in unsealed vessels.
• Door of the refrigerator may have been left ajar.
>>>Do not keep the doors of your refrigerator
open for a long time.
• The thermostat may have been set to a very cold
level. >>>Set the thermostat to an appropriate
level.
The compressor is not operating.
• Protective thermal of the compressor will blow out
during sudden power failures or plug-out plug-ins
as the refrigerant pressure in the cooling system
of the refrigerator has not been balanced yet. The
refrigerator will start running approximately after
6 minutes. Please call the Authorised Service
Provider if the refrigerator does not start at the
end of this period.
• The freezer is in defrosting cycle. >>>This
is normal for a refrigerator that performs
full-automatic defrosting. Defrosting cycle is
performed periodically.
• The refrigerator may not be plugged in. >>>Make
sure that the plug fits the socket.
• Temperature settings may be incorrect.
>>>Select the correct temperature value.
• Possible power failure. >>>The refrigerator will
start to operate normally when power restores.
The operation noise increases when the
refrigerator is running.
• Operating performance of the refrigerator may
vary based on the ambient temperature changes.
This is normal and not a fault.
The fridge is running frequently or for a long
time.
• Your new product may be bigger than the previous
one. Larger refrigerators operate for a longer
period of time.
• The room temperature may be high. >>> It
is normal that the product operates for longer
periods in hot environments.
• The refrigerator may have just been plugged in or
loaded with food. >>>It takes the product longer
to reach the set temperature when it has just been
plugged in or loaded with food. This is normal.
• Large amounts of hot food may have been placed
into the refrigerator recently. >>>Do not place hot
foods into the refrigerator.
• The doors may have been opened frequently or
left ajar for a long time. >>>The warm air that
enters the refrigerator causes it to operate for
a longer period of time. Do not open the doors
frequently.
• Freezer or fridge compartment door may have
been left ajar. >>> Check if the doors are closed
completely.
• The appliance may be set to a very low
temperature. >>> Set the refrigerator
temperature to a warmer degree and wait until the
product reaches this temperature.
• Door seal of the fridge or freezer compartment
may be soiled, worn out, broken or not properly
seated. >>> Clean or replace the seal. Damaged/
broken seal causes the refrigerator to run for
a longer period of time to maintain the current
temperature.
Fridge temperature is adequate but the freezer
temperature is very low.
• The freezer compartment temperature may be
set to a very low value. >>> Set the freezer
compartment temperature to a higher value and
check.
Freezer temperature is adequate but the fridge
temperature is very low.
• The fridge temperature is adjusted to a very low
value. >>> Adjust the fridge temperature to a
higher value and check.
26 /35 EN
Refrigerator / User Guide
Troubleshooting
Food kept in the fridge compartment drawers is
frozen.
• The fridge compartment temperature may be
set to a very high value. >>> Set the fridge
compartment temperature to a lower value and
check.
Temperature in the fridge or freezer is very high.
• The fridge compartment temperature may
be set to a very high value. >>> Fridge
compartment temperature setting has an effect
on the temperature of the freezer. Change the
temperature of the fridge or freezer compartment
until the fridge or freezer compartment
temperature reaches an adequate level.
• The doors may have been opened frequently or
left ajar for a long time. >>>Do not open the
doors frequently.
• The door may have been left ajar. >>>Close the
door completely.
• The refrigerator may have been just plugged in or
loaded with food. >>>This is normal. It takes the
product longer to reach the set temperature when
it has just been plugged in or loaded with food.
• Large amounts of hot food may have been placed
into the refrigerator recently. >>>Do not place hot
foods into the refrigerator.
Vibration or noise.
• The floor may not be stable or level. >>>If the
refrigerator shakes when moved slightly, adjust the
feed to balance it. Make sure that the floor is level
and capable of carrying the refrigerator.
• Objects placed onto the refrigerator may cause
noise. >>>Remove the objects on the refrigerator.
There are noises coming from the refrigerator
like liquid spilling or spraying.
• Liquid and gas flows occur in accordance with the
operating principles of the refrigerator. >>>This is
normal and not a fault.
Whistle is heard from the refrigerator.
• There are fans that are used to cool the
refrigerator. This is normal and not a fault.
Damp accumulates on the inner walls of
refrigerator.
• Hot and humid weather increases icing and
condensation. This is normal and not a fault.
• The doors may have been opened frequently or
left ajar for a long time. >>>Do not open the
doors frequently. Close the doors, if open.
• The door may have been left ajar. >>>Close the
door completely.
Humidity occurs on the outer surface of the
refrigerator or between the doors.
Refrigerator / User Guide
• Air might be humid. This is quite normal in humid
weathers. >>>Condensation will disappear when
the humidity level decreases.
• There might be external condensation at the
section between two doors of the refrigerator
if you use your product rarely. This is normal.
Condensation will disappear upon frequent use.
There is a bad odour inside the refrigerator.
• No regular cleaning may have been performed.
Clean the inside of the refrigerator with a sponge,
lukewarm water or carbonated water.
• Some vessels or packaging materials may cause
the odour. >>>Use another vessel, or packaging
materials from another brand.
• Foods may have been placed into the refrigerator
in vessels without covers. >>>Store the foods
in closed vessels. Microorganisms emitted from
vessels without a cover may cause unpleasant
odours.
• Take out expired or spoiled foods from the
refrigerator.
The door cannot be closed.
• Food packages may be preventing the door from
closing. >>> Re-locate the packages that are
obstructing the door.
• The refrigerator may be unstable on the floor.
>>>Adjust the refrigerator feet as required to
keep the refrigerator in balance.
• The floor may not be level or solid. >>>Make sure
that the floor is level and capable of carrying the
refrigerator.
Crispers are stuck.
• Foods may be touching the upper wall of the
crisper. >>>Re-organise the foods in the crisper.
If The Surface Of The Product Is Hot.
High temperatures may be observed between the two
doors, on the side panels and at the rear grill while
the product is operating. This is normal and does not
require service maintenance!
Fan keeps running when the door is open.
The fan may keep running when the door of the
freezer is open.
WARNING: If you cannot eliminate
A
the problem although you follow the
instructions in this section, consult your
dealer or the Authorised Service Provider.
Never attempt to repair a malfunctioned
product.
27/35EN
DISCLAIMER / WARNING
Some (simple) failures can be adequately
handled by the end-user without any
safety issue or unsafe use arising,
provided that they are carried out within
the limits and in accordance with the
following instructions (see the “SelfRepair” section).
Therefore, unless otherwise authorized
in the “Self-Repair” section below,
repairs shall be addressed to registered
professional repairers in order to avoid
safety issues. A registered professional
repairer is a professional repairer that has
been granted access to the instructions
and spare parts list of this product by the
manufacturer according to the methods
described in legislative acts pursuant to
Directive 2009/125/EC.
However, only the service agent (i.e.
authorized professional repairers)
that you can reach through the phone
number given in the user manual/
warranty card or through your
authorized dealer may provide service
under the guarantee terms. Therefore,
please be advised that repairs by
professional repairers (who are not
authorized by Beko) shall void the
guarantee.
Self-Repair
Self-repair can be done by the end-user
with regard to the following spare parts:
door handles,door hinges, trays, baskets
and door gaskets (an updated list is also
available in support.beko.com as of 1st
March 2021).
Moreover, to ensure product safety and to
prevent risk of serious injury, the mentioned
self-repair shall be done following the
instructions in the user manual for selfrepair or which are available in support.
beko.com. For your safety, unplug the
product before attempting any self-repair.
Repair and repair attempts by end-users
for parts not included in such list and/
or not following the instructions in the
user manuals for self-repair or which are
available in support.beko.com, might give
raise to safety issues not attributable to
Beko, and will void the warranty of the
product.
Therefore, it is highly recommended that
end-users refrain from the attempt to carry
out repairs falling outside the mentioned
list of spare parts, contacting in such
cases authorized professional repairers
or registered professional repairers. On
the contrary, such attempts by end-users
may cause safety issues and damage
the product and subsequently cause fire,
flood, electrocution and serious personal
injury to occur.
By way of example, but not limited to,
the following repairs must be addressed
to authorized professional repairers
or registered professional repairers:
compressor, cooling circuit, main
board,inverter board, display board, etc.
The manufacturer/seller cannot be held
liable in any case where end-users do not
comply with the above.
The spare part availability of the refrigerator
that you purchased is 10 years.
During this period, original spare parts will
be available to operate the refrigerator
properly
The minimum duration of guarantee of
the refrigerator that you purchased is 24
months.
Bitte lesen Sie vor Inbetriebnahme des Gerätes diese Anleitung!
A
A
Sehr geschätzte Kundin, sehr geschätzter Kunde,
wir hoffen, dass Sie mit Ihrem Produkt, das sorgfältig in modernen Anlagen hergestellt und mit detaillierten
Qualitätsprüfungen getestet wurde, optimale Ergebnisse erzielen.
Daher empfehlen wir Ihnen, diese Bedienungsanleitung vor Inbetriebnahme des Produktes aufmerksam zu lesen.
Falls Sie das Gerät an jemand anderen weitergeben, vergessen Sie nicht, diese Bedienungsanleitung ebenfalls
beizulegen.
Die Anleitung hilft Ihnen, Ihr Gerät schnell und sicher zu bedienen.
• Bitte lesen Sie die Bedienungsanleitung aufmerksam, bevor Sie das Produkt aufstellen und bedienen.
• Halten Sie stets die zutreffenden Sicherheitshinweise ein.
• Bewahren Sie die Bedienungsanleitung zum künftigen Nachschlagen an einem leicht zugänglichen Ort auf.
• Bitte lesen Sie alle anderen mit dem Produkt bereitgestellten Dokumente.
Beachten Sie, dass diese Bedienungsanleitung auf verschiedene Produktmodelle zutreffen kann. Diese Anleitung
weist ausdrücklich auf Unterschiede zwischen verschiedenen Modellen hin.
C
A
B
Wichtige Informationen und
nützliche Hinweise.
Gefahr von Verletzungen und
Sachschäden.
Stromschlaggefahr.
Die Verpackungsmaterialien
des Gerätes wurden
gemäß nationalen
Umweltschutzbestimmungen
aus recyclingfähigen
Materialien hergestellt.
ANGABEN
C
SUPPLIER’S NAME
A
MODEL IDENTIFIER
Die Modellinformationen, wie sie in der Produktdatenbank
gespeichert sind, können durch Eingabe der folgenden Website und Suche nach Ihrer Modellkennung (*) auf dem Ener-
(*)
gieetikett erreicht werden.
https://eprel.ec.europa.eu/
Loading...
+ 72 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.