Beko RASGL142B, RASGL142PX, RASFLE72B, RASFLE72PX, ASGP342B User Manual

ASGP342X
ASGP342B
ASGN542B
ASGN542X

EN

ASGN542S
ASGL142X
RASGL142B
RASGL142PX

RASFLE72B
RASFLE72PX
RASGD242PX

Please read these instructions first before using your appliance

Thank you for choosing a Beko appliance.

Please take some time to read this user manual before using your appliance, to ensure you know how to
safely operate the controls and functions.

Carefully follow all unpacking and installation instructions to ensure the appliance is correctly connected
and fitted prior to use.

Please write your product model and serial number on the last page of this user manual, and store in a
safe location close to the appliance for easy future reference.

This user manual may also be applicable for several other models. Differences between models will be
listed.

If you have any questions or concerns, please call our contact centre or find help and information online
at www.beko.co.uk

Symbols and their descriptions

This instruction manual contains the following symbols:

C Important information or useful usage tips.
A Warning against dangerous conditions for life and property.
B Warning against electric voltage.

Table of Contents

1. Safety and environment instructions 3

1.1. General safety. . . . . . . . . . . . . . . . . . . . . . . 3

1.1.1 HC warning. . . . . . . . . . . . . . . . . . . . . . . . 4

1.1.2 For models with water dispenser . . . . . . . . 4

1.2. Intended use. . . . . . . . . . . . . . . . . . . . . . . . 5

1.3. Child safety. . . . . . . . . . . . . . . . . . . . . . . . . 5

1.4. Compliance with WEEE Directive and

Disposing of the Waste Product . . . . . . . . . 5

1.5. Compliance with RoHS Directive . . . . . . . . . 5

1.6. Package information . . . . . . . . . . . . . . . . . . 5

2 Refrigerator 6

3 Installation 7

3.1. Right place for installation . . . . . . . . . . . . . . 7

3.2. Attaching the plastic wedges . . . . . . . . . . . . 7

3.3. Adjusting the stands . . . . . . . . . . . . . . . . . . 8

3.4. Power connection . . . . . . . . . . . . . . . . . . . . 8

3.5. Water connection . . . . . . . . . . . . . . . . . . . . 9

3.6. Connecting water hose to the product . . . . 10

3.7. Connecting to water mains . . . . . . . . . . . . 10

3.8. For products using water carboy . . . . . . . . 11

3.9 Water filter . . . . . . . . . . . . . . . . . . . . . . . . . 11

3.9.1.Fixing external filter on the wall (Optional) 12

3.9.2.Internal filter . . . . . . . . . . . . . . . . . . . . . . 13

4 Preparation 15

4.1. What to do for energy saving . . . . . . . . . . . 15

4.2. First Use . . . . . . . . . . . . . . . . . . . . . . . . . . 15

5 Using the product 16

5.1. Indicator panel . . . . . . . . . . . . . . . . . . . . . 16

5.2. Humidity controlled crisper . . . . . . . . . . . . 26

5.3. Activating water filter change warning. . . . 27

5.4. Using the water fountain . . . . . . . . . . . . . . 29

5.5. Filling the fountain water tank . . . . . . . . . . 29

5.6. Cleaning the water tank. . . . . . . . . . . . . . . 30

5.7. Taking ice / water . . . . . . . . . . . . . . . . . . . 31

5.8. Drip tray . . . . . . . . . . . . . . . . . . . . . . . . . 31

5.9. Zero degree compartment. . . . . . . . . . . . . 32

5.10. Vegetable bin . . . . . . . . . . . . . . . . . . . . . 32

5.11. Blue light . . . . . . . . . . . . . . . . . . . . . . . . 32

5.12. Ionizer . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

5.13. Minibar . . . . . . . . . . . . . . . . . . . . . . . . . . 32

5.14. Odour filter . . . . . . . . . . . . . . . . . . . . . . . 32

5.15. Icematic and ice storage box . . . . . . . . . . 33

5.16. Ice-maker . . . . . . . . . . . . . . . . . . . . . . . . 33

5.17. Freezing fresh food . . . . . . . . . . . . . . . . . 35

5.18. Recommendations for storing frozen foods 35

5.19. Deep freezer details. . . . . . . . . . . . . . . . . 35

5.20. Placing the food. . . . . . . . . . . . . . . . . . . . 36

5.21. Door open alert . . . . . . . . . . . . . . . . . . . . 36

5.22. Interior light . . . . . . . . . . . . . . . . . . . . . . . 36

6 Maintenance and cleaning 37

6.1 Avoiding bad odours . . . . . . . . . . . . . . . . . 37

6.2 Protecting the plastic surfaces . . . . . . . . . 37

6.3 Cleaning of Glass Water Tank. . . . . . . . . . . 38

7. Troubleshooting 39

2 / 47 EN

Refrigerator / User Guide

1. Safety and environment instructions

This section provides the safety
instructions necessary to prevent the risk
of injury and material damage. Failure to
observe these instructions will invalidate
all types of product warranty.

Intended use

WARNING:

Keep ventilation openings, in

A

A

A

A

the appliance enclosure or in
the built-instructure, clear of
obstruction.

WARNING:

Do not use mechanical
devices or other means to
accelerate the defrosting
process, other than those
recommended by the
manufacturer.

WARNING:

Do not damage the refrigerant
circuit.

WARNING:

Do not use electrical
appliances inside the food
storage compartments of the
appliance, unless they are of
the type recommended by the
manufacturer.

1.1. General safety

• This product should not be used by

persons with physical, sensory and
mental disabilities, without sufficient
knowledge and experience or by
children. The device can only be used
by such persons under supervision
and instruction of a person responsible
for their safety. Children should not be
allowed to play with this device.

• In case of malfunction, unplug the

device.

• After unplugging, wait at least 5 minutes

before plugging in again.

• Unplug the product when not in use.

• Do not touch the plug with wet hands!

Do not pull the cable to plug off, always
hold the plug.

• Do not plug in the refrigerator if the

socket is loose.

• Unplug the product during installation,

maintenance, cleaning and repair.

• If the product will not be used for a

while, unplug the product and remove
any food inside.

• Do not use the product when the

compartment with circuit cards located
on the upper back part of the product
(electrical card box cover) (1) is open.

This appliance is intended to be used in
household and similar applications such
as
– staff kitchen areas in shops, offices and
other working environments;
– farm houses and by clients in hotels,
motels and other residential type
environments;
– bed and breakfast type environments;
– catering and similar non-retail
applications.

Refrigerator / User Guide

1

1

• Do not use steam or steamed cleaning

materials for cleaning the refrigerator
and melting the ice inside. Steam may
contact the electrified areas and cause

3 / 47 EN

Safety and environment instructions

short circuit or electric shock!

• Do not wash the product by spraying or

pouring water on it! Danger of electric
shock!

• In case of malfunction, do not use

the product, as it may cause electric
shock. Contact the authorised service
before doing anything.

• Plug the product into an earthed

socket. Earthing must be done by a
qualified electrician.

• If the product has LED type lighting,

contact the authorised service for
replacing or in case of any problem.

• Do not touch frozen food with wet

hands! It may adhere to your hands!

• Do not place liquids in bottles and cans

into the freezer compartment. They
may explode.

• Place liquids in upright position after

tightly closing the lid.

• Do not spray flammable substances

near the product, as it may burn or
explode.

• Do not keep flammable materials and

products with flammable gas (sprays,
etc.) in the refrigerator.

• Do not place containers holding liquids

on top of the product. Splashing water
on an electrified part may cause
electric shock and risk of fire.

• Exposing the product to rain, snow,

sunlight and wind will cause electrical
danger. When relocating the product,
do not pull by holding the door handle.
The handle may come off.

• Take care to avoid trapping any part

of your hands or body in any of the
moving parts inside the product.

• Do not step or lean on the door,

drawers and similar parts of the
refrigerator. This will cause the product
to fall down and cause damage to the
parts.

• Take care not to trap the power cable.

1.1.1 HC warning

If the product comprises a cooling system
using R600a gas, take care to avoid
damaging the cooling system and its pipe
while using and moving the product. This
gas is flammable. If the cooling system
is damaged, keep the product away from
sources of fire and ventilate the room
immediately.

C

1.1.2 For models with
water dispenser

• Pressure for cold water inlet shall be

maximum 90 psi (620 kPa). If your
water pressure exceeds 80 psi (550
kPa), use a pressure limiting valve in
your mains system. If you do not know
how to check your water pressure, ask
for the help of a professional plumber.

• If there is risk of water hammer effect

in your installation, always use a water
hammer prevention equipment in
your installation. Consult Professional
plumbers if you are not sure that there
is no water hammer effect in your
installation.

• Do not install on the hot water inlet.

Take precautions against of the
risk of freezing of the hoses. Water
temperature operating interval shall
be 33°F (0.6°C) minimum and 100°F
(38°C) maximum.

4 / 47 EN

The label on the inner left side
indicates the type of gas used in
the product.

Refrigerator / User Guide

Safety and environment instructions

• Use drinking water only.

1.2. Intended use

• This product is designed for home use.

It is not intended for commercial use.

• The product should be used to store

food and beverages only.

• Do not keep sensitive products

requiring controlled temperatures
(vaccines, heat sensitive medication,
medical supplies, etc.) in the
refrigerator.

• The manufacturer assumes no

responsibility for any damage due to
misuse or mishandling.

• Original spare parts will be provided

for 10 years, following the product
purchasing date.

1.3. Child safety

• Keep packaging materials out of

children’s reach.

• Do not allow the children to play with

the product.

• If the product’s door comprises a lock,

keep the key out of children’s reach.

center for the recycling of electrical and electronic
equipment. Please consult your local authorities to
learn about these collection centers.

1.5. Compliance with RoHS Directive

• This product complies with EU WEEE Directive
(2011/65/EU). It does not contain harmful and
prohibited materials specified in the Directive.

1.6. Package information

Packaging materials of the product are
manufactured from recyclable materials in
accordance with our National Environment
Regulations. Do not dispose of the packaging
materials together with the domestic or other
wastes. Take them to the packaging material
collection points designated by the local
authorities.

This product has been manufactured
with high quality parts and materials
which can be reused and are suitable
for recycling. Do not dispose of the
waste product with normal domestic
and other wastes at the end of its
service life. Take it to the collection

1.4. Compliance with WEEE Directive
and Disposing of the Waste Product

This product complies with EU WEEE
Directive (2012/19/EU). This product bears a
classification symbol for waste electrical and
electronic equipment (WEEE).

Refrigerator / User Guide

5 / 47 EN

2 Refrigerator

2

3

*4

5

*6

1

*7

*11

*16

*16

*17

*18

12

13

14

15

13

*8

10

*9

1- Freezer compartment
2- Cooler compartment
3- Fan
4- Butter-cheese compartment
5- Glass shelves
6- Cooler compartment door shelves
7- Minibar accessory
8- Water tank
9- Wine rack

10- Odour filter
11- Zero degree compartment
12- Vegetable bins
13- Adjustable stands
14- Frozen food storing compartments
15- Freezer compartment door shelves
16- Icematics
17- Ice storage box
18- Ice-maker decorative lid

*Optional

C

*Optional: Figures in this user guide are schematic and may not be exactly match your product. If your
product does not comprise the relevant parts, the information pertains to other models.

6 / 47 EN

Refrigerator / User Guide

3 Installation

3.1. Right place for installation

To ready the product for installation, see the
information in the user guide and make sure the
electric and water utilities are as required. If not,
call an electrician and plumber to arrange the
utilities as necessary.

WARNING: The manufacturer assumes

no responsibility for any damage caused

B

B

A

•Placetheproductonaflatsurfacetoavoid

vibration.

•Placetheproductatleast30cmawayfromthe

heater, stove and similar sources of heat and at
least 5 cm away from electric ovens.

•Donotexposetheproducttodirectsunlightor

keep in damp environments.

•Theproductrequiresadequateaircirculationto

function efficiently. If the product will be placed
in an alcove, remember to leave at least 5 cm
distance between the product and the ceiling
and the walls.

•Donotinstalltheproductinenvironmentswith

temperatures below -5°C.

by the work carried out by unauthorized
persons.

WARNING: The product’s power cable

must be unplugged during installation.
Failure to do so may result in death or
serious injuries!

WARNING: : If the door span is too

narrow for the product to pass, remove the
door and turn the product sideways.

3.2. Attaching the plastic wedges

Use the plastic wedges in the provided with
the product to provide sufficient space for air
circulation between the product and the wall.

1.

To attach the wedges, remove the screws on the

product and use the screws provided with the wedges.

2.

Attach 2 plastic wedges on the ventilation cover

shown as j in the figure.

Refrigerator / User Guide

7 / 47 EN

Installation

3.3. Adjusting the stands

If the product is not in balanced position, adjust the
front adjustable stands by rotating right or left.

In order to adjust the doors vertically,

•Loosenthefixingnutatthebottom

•Screwadjustingnut(CW/CCW)accordingtothe

position of the door

•Tightenthefixingnutforthefinalposition

In order to adjust the doors horizontally,

• Loosen the fixing bolt on the top

• Screw the adjusting bolt (CW/CCW) on the side

according to the position of the door

• Tighten the fixing bolt on the top for the final
position

adjusting nut

fixing nut

fixing nut

3.4. Power connection

WARNING: Do not use extension or multi

A
B

C

• Our firm will not assume responsibility for any

• The power cable plug must be easily

• Do not use multi-group plug with or without

sockets in power connection.

WARNING: Damaged power cable must

be replaced by Authorized Service.

When placing two coolers in adjacent
position, leave at least 4 cm distance
between the two units.

damages due to usage without earthing and
power connection in compliance with national
regulations.

accessible after installation.

extension cable between the wall socket and
the refrigerator.

8 / 47 EN

Refrigerator / User Guide

Installation

3.5. Water connection

(Optional)

WARNING: Unplug the product and

A

The product can be connected to a carboy or
directly to the water mains, depending on the
model. To establish the connection, the water hose
must first be connected to the product.
Check to see the following parts are supplied with
your product’s model:

the water pump (if available) during
connection.

1

3

1. Connector (1 piece): Used to attach the water

hose to the rear of the product.

2. Hose clip (3 pieces): Used to fix the water

hose on the wall.

3. Water hose (1 piece, 5 meter diameter 1/4

inches): Used for the water connection.

4. Tap adapter (1 piece): Comprises a porous

filter, used for connection to the cold water
mains.

5. Water filter (1 piece *Optional): Used to

connect the mains water to the product. Water
filter is not required if carboy connection is
available.

2

4

*5

Refrigerator / User Guide

9 / 47 EN

Installation

3.6. Connecting water

hose to the product

To connect the water hose to the product,
follow the instructions below.

1. Remove the connector on the hose nozzle

adaptor in the back of the product and run the
hose through the connector.

3.7. Connecting to water mains

(Optional)

To use the product by connecting to the cold water
mains, a standard 1/2” valve connector must be
installed to the cold water mains in your home. If
the connector is not available or if you are unsure,
consult a qualified plumber.

1. Detach the connector (1) from the tap adaptor

(2).

2. Push the water hose down tightly and connect

to the hose nozzle adaptor.

3. Tighten the connector manually to fix on the

hose nozzle adaptor. You may also tighten the
connector using a pipe wrench or pliers.

3

2. Connect the tap adaptor to the water mains

valve.

3. Attach the connector around the water hose.

2

23

1

1

4. Connect the other end of the hose to the

water mains (See Section 3.7) or, to use
carboy, to the water pump (See Section 3.8).

10 / 47 EN

Refrigerator / User Guide

Installation

4. Attach the connector into the tap adaptor and

tighten by hand / tool.

5. To avoid damaging, shifting or accidentally

disconnecting the hose, use the clips provided
to fix the water hose appropriately.

2. Connect the other end of the water hose to

the water pump by pushing the hose into the
pump’s hose inlet.

3. Place and fasten the pump hose inside the

carboy.

WARNING: After turning the tap on, make

A

sure there is no water leak on either end of
the water hose. In case of leakage, turn the
valve off and tighten all connections using
a pipe wrench or pliers.

3.8. For products using water carboy

(Optional)

To use a carboy for the product’s water
connection, the water pump recommended by the
authorized service must be used.

1. Connect one end of the water hose provided

with the pump to the product (see 3.6) and
follow the instructions below.

Refrigerator / User Guide

4. Once the connection is established, plug in

and start the water pump.

Please wait 2-3 minutes after starting

C
C

C

the pump to achieve the desired
efficiency.

See also the pump’s user guide for
water connection.

When using carboy, water filter is not
required.

3.9 Water filter

(Optional)

The product may have internal or external filter,
depending on the model. To attach the water filter,
follow the instructions below.

11 / 47 EN

Installation

3.9.1.Fixing external filter

on the wall (Optional)

WARNING: Do not fix the filter on the

A

Check to see the following parts are supplied with
your product’s model:

product.

5

4

6

4. Attach the water hose extending from the top

of the filter to the product’s water connection
adaptor, (see 3.6.)

1

1. Connector (1 piece): Used to attach the water

hose to the rear of the product.

2. Tap adapter (1 piece): Used for connection to

the cold water mains.

3. Porous filter (1 piece)

4. Hose clip (3 pieces): Used to fix the water

hose on the wall.

5. Filter connecting apparatus (2 pieces): Used to

fix the filter on the wall.

6. Water filter (1 piece): Used to connect the

product to the water mains. Water filter is not
necessary when using carboy connection.

1. Connect the tap adaptor to the water mains

valve.

2. Determine the location to fix the external filter.

Fix the filter’s connecting apparatus (5) on the
wall.

3. Attach the filter in upright position on the filter

connecting apparatus, as indicated on the
label. (6)

3

2

After the connection is established, it should look
like the figure below.

12 / 47 EN

Refrigerator / User Guide

Installation

3.9.2.Internal filter

The internal filter provided with the product is not
installed upon delivery; please follow the instructions
below to install the filter.

Water line:

1. “Ice Off” indicator must be active while

installing the filter. Switch the ON-OFF
indicator using the “Ice” button on the screen.

2. Remove the vegetable bin (a) to access the

water filter.

Carboy line:

Do not use the first 10 glasses of

C

Refrigerator / User Guide

water after connecting the filter.

a

13 / 47 EN

Installation

3. Remove the water filter by-pass cover by

pulling.

A few drops of water may flow out

C

4. Place the water filter cover into the

mechanism and push to lock in place.

after removing the cover; this is
normal.

5. Push the “Ice” button on the screen again to

cancel the “Ice Off” mode.

The water filter will clear certain foreign

C
C

particles in the water. It will not clear the
microorganisms in the water.

See section 5.2 for activating the filter
replacing period.

14 / 47 EN

Refrigerator / User Guide

4 Preparation

4.1. What to do for energy saving

Connecting the product to electronic

A

• Do not keep the refrigerator doors open for

• Do not place hot food or beverages into the

• Do not overfill the refrigerator; blocking the

• The energy consumption value specified for

• Depending on the product’s features;

• The baskets/drawers that are provided with the

• Food contact with the temperature sensor in

• Make sure the foods are not in contact with

energy-saving systems is harmful, as it
may damage the product.

long periods.

refrigerator.

internal air flow will reduce cooling capacity.

the refrigerator was measured with the freezer
compartment’s upper shelf removed, other
shelves and the lowest drawers in place and
under maximum load. The top glass shelf can
be used, depending on the shape and size of
food to be frozen.

defrosting frozen foods in the cooler
compartment will ensure energy saving and
preserve food quality.

chill compartment must always be in use for
low energy consumption and for better storage
conditions.

the freezer compartment may increase energy
consumption of the appliance. Thus any
contact with the sensor(s) must be avoided.

the cooler compartment temperature sensor
described below.

4.2. First Use

Before using your refrigerator, make sure the
necessary preparations are made in line with
the instructions in “Safety and environment
instructions” and “Installation” sections.

• Keep the product running with no food inside
for 6 hours and do not open the door, unless
absolutely necessary.

A sound will be heard when the

C

C

compressor is engaged. It is normal to
hear sound even when the compressor is
inactive, due to the compressed liquids
and gasses in the cooling system.

It is normal for the front edges of the
refrigerator to be warm. These areas are
designed to warm up in order to prevent
condensation.

In some models, the indicator panel

C

automatically turns off 5 minutes after
the door has closed. It will be reactivated
when the door has opened or pressed on
any key.

Refrigerator / User Guide

15 / 47 EN

5 Using the product

5.1. Indicator panel

Indicator panels may vary depending on the model of your product.
Audial and visual functions of the indicator panel will assist in using the refrigerator.

1

8

2

3

9

7 6

1.

Cooler compartment indicator

2.

Error status indicator

3.

Temperature indicator

4.

Vacation function button

5.

Temperature adjustment button

6.

Compartment selection button

7.

Freezer Compartment indicator

8.

Economy mode indicator

9.

Vacation function indicator

*optional

45

C

*Optional: The figures in this user guide are intended as drafts and may not perfectly match your

product. If your product does not comprise the relevant parts, the information pertains to other models.

16 / 47 EN

Refrigerator / User Guide

Using the product

1. Cooler compartment indicator

The cooler compartment light will turn on when
adjusting the cooler compartment temperature.

2. Error status indicator

This sensor will activate if the refrigerator is not
cooling adequately or in case of sensor fault. When
this indicator is active, the freezer compartment
temperature indicator will display "E" and the
cooler compartment temperature indicator will
display "1, 2, 3..." etc. numbers. The numbers on
the indicator serve to inform the service personnel
about the fault.

3. Temperature indicator

Indicates the temperature of the freezer and cooler
compartments.

4.Vacation function button

To activate this function, press and hold the
Vacation button for 3 seconds. When the Vacation
function is active, the cooler compartment
temperature indicator displays the inscription
"- -" and no cooling process will be active in
the cooling compartment. This function is not
suitable to keep food in the cooler compartment.
Other compartments will remain cooled with the
respective temperature set for each compartment.

Push the Vacation button ( ) again to cancel
this function.

5. Temperature adjustment button

Respective compartment's temperature varies in

-24°C..... -18°C and 8°C...1°C ranges.

6. Compartment selection button

Use the refrigerator compartment selection
button to toggle between the cooler and freezer
compartments.

7. Freezer Compartment indicator

The freezer compartment light will turn on when
adjusting the cooler compartment temperature.

8. Economy mode indicator

Indicates the refrigerator is running on energy­saving mode. This indicator will be active when
the temperature in the freezer compartment is set
to -18°C.

9.Vacation function indicator

Indicates the vacation function is active.

Refrigerator / User Guide

17 / 47 EN

Using the product

1

2

3

4

5

6

7

9

8

C

Eco Mode

interaction with product/
Display On after any interaction with buttons

Yellow: Vacation

1- Power failure/High temperature / error
warning

2- Freezer compartment temperature setting
3- Quick freeze
4- Key lock
5- Vacation function
6- Quick Fridge
7- Fridge compartment temperature setting
8- Eco fuzzy
9- Alarm off warning

*Optional: The figures in this user guide are intended as drafts and may not perfectly match your

product. If your product does not comprise the relevant parts, the information pertains to other models.

18 / 47 EN

Refrigerator / User Guide

Using the product

• High temperature alarm :RED (1 Hz flash)

• Within 1 min. after the door is opened

(when the door: open alarm is enabled) RED light
becomes on.

• When the door is opened : WHITE

• Eco Mode : GREEN

• Quick Freeze : BLUE

• Quick Fridge : BLUE

• Vacation : YELLOW

• Display Off : GREEN

• After the door is closed, if one of the
WHITE / Eco Mode, Quick Freeze, Quick
Fridge, Vacation modes are active, the colour
of these modes are displayed for 1 min. (The
colour of the mode is more dominant than
that of the display status).

1. Power failure/High temperature / error
warning

This indicator illuminates during power failure, high
temperature failures and error warnings. During
long-term power failures, the highest temperature
value that the freezer compartment reaches will
blink on the digital display. After checking the food
located in the freezer compartment, press the
alarm off button to clear the warning.

Please refer to "solutions recommended for
troubleshooting" section on your manual if you
observe that this indicator is illuminated.

2. Freezer compartment temperature setting

Temperature setting is made for freezer
compartment. When this button is pressed,
you can set the temperature of the freezer
compartment to -18, -19, -20, -21, -22, -23 and

-24.

3. Quick freeze

Press this button for quick freeze operation, the
quick freeze indicator ( ) will be activated.

Quick freeze indicator is lit when quick freeze
function is on and fridge compartment temperature
indicator displays -27. To cancel this function
press the quick freeze button ( ) again. Quick
freeze indicator will turn off and refrigerator will

reset to its normal settings. Quick freeze function
is cancelled automatically in 24 hour if you do not
cancel it. If you want to freeze large amounts of
fresh food, press the quick freeze button before
putting the food into the freezer compartment.

4. Key lock

Press and hold the alarm off button for 3 seconds.
The key lock symbol will be on and key lock will
be activated; When the Key Lock is on, the buttons
are disabled. Press and hold the alarm off button
for 3 seconds again. The key lock symbol will be
off and the key lock mode will be disabled.

5. Vacation function

In order to activate the vacation function, press and
hold the fuzzy button for 3 seconds; the vacation
mode indicator ( ) will be activated. When the
vacation function is activated, "- -" is displayed on
the fridge compartment temperature indicator and
no active cooling operation will be performed on
the fridge compartment. It is not suitable to keep
the food in the fridge compartment in this function.
Other compartments will continue to be cooled
according to their set temperatures.

To cancel this function, press the Vacation
function button again.

6.Quick fridge

Quick fridge indicator is lit ( ) and the fridge
compartment temperature indicator value is displayed
as 1 when the quick fridge function is activated. To
cancel this function, press the Quick fridge button
again. Quick fridge indicator will be off and the
refrigerator will be reset to its normal settings. Quick
fridge function is cancelled automatically in 1 hour if
you do not cancel it. If you want to cool large amounts
of fresh food, press the Quick fridge button before
putting the food into the fridge compartment.

7. Fridge compartment temperature setting

When this button is pressed the fridge
compartment temperature can be set to
8,7,6,5,4,3,2 and 1 values.

Refrigerator / User Guide

19 / 47 EN

Using the product

1

2

3

4

56

7.1

7.2

8910

11

8. Eco fuzzy

Press and hold the eco fuzzy button for 1 seconds
to activate the eco fuzzy function. Refrigerator will
start operating in the most economic mode at least
6 hours later and the economic usage indicator
will be on ( ). Press and hold the eco fuzzy
function button for 3 seconds to disable the eco
fuzzy function.

This indicator will be on after 6 hours when eco
fuzzy is activated.

9. Alarm off warning

In case of power failure/high temperature
alarm, after checking the foods in the freezer
compartment, press the alarm off button to clear
the warning.

20 / 47 EN

Refrigerator / User Guide

Using the product

3

1

2

11

7.2

7.1

8910

1. Economic use
2- High temperature / fault alert

3. Energy saving function (display off)
4- Rapid cooling
5- Vacation function
6- Cooler compartment temperature setting

7. Energy saving (display off) /Alarm off
8- Keypad lock
9- Eco-fuzzy
10- Freezer compartment temperature setting
11- Rapid freezing

4

56

*Optional: The figures in this user guide are intended as drafts and may not perfectly match
your product. If your product does not comprise the relevant parts, the information pertains

C

Refrigerator / User Guide

to other models.

21 / 47 EN

Using the product

1. Economic use

This sign will light up when the freezer
compartment is set to -18°C', the most
economical setting. ( ) Economic use indicator
will turn off when rapid cooling or rapid freezing
function is selected.

2. Power failure/High temperature / error
warning indicator

This indicator ( ) will light up in case of
temperature faults or fault alerts.

This indicator illuminates during power failure, high
temperature failures and error warnings. During
sustained power failures, the highest temperature
that the freezer compartment reaches will flash on
the digital display. After checking the food located
in the freezer compartment press the alarm off
button to clear the warning.

3. Energy saving function (display off)

If the product doors are kept closed for a long time
energy saving function is automatically activated
and energy saving symbol is illuminated. When
energy saving function is activated, all symbols
on the display other than energy saving symbol
will turn off. When the Energy Saving function is
activated, if any button is pressed or the door is
opened, energy saving function will be cancelled
and the symbols on display will return to normal.

Energy saving function is activated during delivery
from factory and cannot be cancelled.

4. Rapid cooling

When the rapid cooling function is turned on, the
rapid cool indicator will light up ( ) and the cooler
compartment temperature indicator will display
the value 1. Push the Rapid cool button again to
cancel this function. The Rapid cool indicator will
turn off and return to normal setting. The rapid
cooling function will be automatically cancelled
after 1 hour, unless cancelled by the user. Too
cool a large amount of fresh food, press the rapid
cool button before placing the food in the cooler
compartment.

5. Vacation function

To activate the Vacation function, , press the quick
fridge button for 3 seconds; this will activate the
vacation mode indicator ( ). When the Vacation
function is active, the cooler compartment
temperature indicator displays the inscription
"- -" and no cooling process will be active in
the cooling compartment. This function is not
suitable to keep food in the cooler compartment.
Other compartments will remain cooled with the
respective temperature set for each compartment.
Push the vacation function button again to cancel
this function.

6. Cooler compartment temperature setting

After pressing the button , the cooler compartment
temperature can be set to 8,7,6,5,4,3,2 and 1
respectively.( )

7. 1 Energy saving (display off)

Pressing this button ( ) will light up the energy­saving sign ( ) and the Energy-saving function
will activate. Activating the energy-saving function
will turn off all other signs on the display. When
the energy-saving function is active, pressing any
button or opening the door will deactivate the
energy-saving function and the display signals will
return to normal. Pressing this button ( ) again
will turn off the energy-saving sign and deactivate
the energy-saving function.

7.2 Alarm off

In case of power failure/high temperature alarm,
after checking the food located in the freezer
compartment press the alarm off button to clear
the warning.

8. Keypad lock

Press the display off button, simultaneously for 3
seconds. The keypad lock sign will light up and the
keypad lock will be activated; the buttons will be
inactive when the Keypad lock is activated. Press
the Display off button again simultaneously for 3
seconds. The keypad lock sign will turn off and
the keypad lock mode will be disengaged. Press
the Display off button to prevent changingthe
refrigerator’s tempeture settings.

22 / 47 EN

Refrigerator / User Guide

Using the product

9. Eco-fuzzy

To activate the eco-fuzzy function, press and hold
the eco-fuzzy button for 1 second. When this
function is active, the freezer will switch to the
economic mode after at least 6 hours and the
economic use indicator will light up. To deactivate

the ( ) eco-fuzzy function, press and hold the
eco-fuzzy function button for 3 seconds.

The indicator will light up after 6 hours when the
eco-fuzzy function is active.

10. Freezer compartment temperature setting

The temperature in the freezer compartment is
adjustable. Pressing the button will enable the
freezer compartment temperature to be set at

-18,-19, -20, -21, -22, -23 and -24.

11. Rapid freezing

For rapid freezing, press the button ; this will
activate the rapid freezing indicator ( ).

When the rapid freezing function is turned on, the
rapid freeze indicator will light up and the freezer
compartment temperature indicator will display
the value -27. Press the Rapid freeze button (
) again to cancel this function. The Rapid freeze
indicator will turn off and return to normal setting.
The rapid freezing function will be automatically
cancelled after 24 hours, unless cancelled by the
user. To freeze a large amount of fresh food, press
the rapid freeze button before placing the food in
the freezer compartment.

Refrigerator / User Guide

23 / 47 EN

Using the product

1

2

3

4

56

7.1

7.2

8910

11

1 2

(*)

*3

4

5

13
12

11.2

1011.1

9

1. Freezer compartment temperature setting

2. Economy mode

3. Energy saving function (display off)

4. Power failure/High temperature / error

warning indicator

5. Cooler compartment temperature setting

6. Rapid cooling

7. Vacation function

8. Keypad lock / filter replacing alert cancellation

9. Water, fragmented ice, ice cubes selection

10. Ice making on/off

11. Display on/off/Alarm off

12. Autoeco

13. Rapid freezing

6

78

C

*Optional: The figures in this user guide are intended as drafts and may not perfectly match
your product. If your product does not comprise the relevant parts, the information pertains
to other models.

24 / 47 EN

Refrigerator / User Guide

Using the product

1. Freezer compartment temperature setting

Pressing the button ( ) will enable the freezer
compartment temperature to be set at -18,-19,­20,-21 ,-22,-23,-24,-18...

2. Economy mode

Indicates the refrigerator is running on energy­saving mode. This indicator will be active when the
freezer compartment temperature is set at -18 or
the energy-saving cooling is engaged by eco-extra
function. ( )

3.Energy saving function (display off)

If the product doors are kept closed for a long time
energy saving function is automatically activated
and energy saving symbol is illuminated. When
energy saving function is activated, all symbols
on the display other than energy saving symbol
will turn off. When the Energy Saving function is
activated, if any button is pressed or the door is
opened, energy saving function will be cancelled
and the symbols on display will return to normal.

Energy saving function is activated during delivery
from factory and cannot be cancelled.

4. Power failure/High temperature / error
warning indicator

This indicator ( ) will light up in case of
temperature faults or fault alerts. This indicator
illuminates during power failure, high temperature
failures and error warnings. During sustained
power failures, the highest temperature that the
freezer compartment reaches will flash on the
digital display. After checking the food located
in the freezer compartment press the alarm off
button to clear the warning.

5. Cooler compartment temperature setting

After pressing the button ( ), the cooler
compartment temperature can be set to
8,7,6,5,4,3,2.. respectively.

6. Rapid cooling

For rapid cooling , press the button; this will
activate the rapid cooling indicator ( ).
Press this button again to deactivate this function.
Use this function when placing fresh foods into

the cooler compartment or to rapidly cool the

Refrigerator / User Guide

25 / 47 EN

food items. When this function is activated, the
refrigerator will be engaged for 1 hour.

7. Vacation function

When the Vacation function ( ) is active, the
cooler compartment temperature indicator displays
the inscription "- -" and no cooling process
will be active in the cooling compartment. This
function is not suitable to keep food in the cooler
compartment. Other compartments will remain
cooled with the respective temperature set for
each compartment.

Press the vacation function button again to cancel
this function. ( )

8. Keypad lock / Keypad lock / filter replacing

alert cancellation

Press keypad lock button ( ) to activate the
keypad lock. You may also use this function to
prevent changing the refrigerator's temperature
settings. The refrigerator's filter must be replaced
every 6 months. If you follow the instructions in
the section 5.2, the refrigerator will automatically
calculate the remaining period and the filter
replacing alert indicator ( ) will light up when
filter expires.

Press and hold the button ( ) for 3 seconds to
turn off the filter alert light.

9. Water, fragmented ice, ice cubes selection

Navigate the water ( ), ice cube ( ) and
fragmented ice ( ) selections using the button
number 8. The active indicator will remain lit.

10. Ice making on/off

Press the button ( ) to cancel ( ) or
activate ( ) ice-making.

11.1 Display on/off

When you press the Display off button and when the (

) function is lit, all the other icons of the
display will go off and the display will enter the energy
saving mode. When you press the Display off button
again and when the( ) function is lit, all
the other icons of the display will be lit and the display
will exit the energy saving mode.

Using the product

11.2 Alarm off warning

In case of power failure/high temperature alarm,
after checking the food located in the freezer
compartment press the alarm off button to clear
the warning.

12. Autoeco

Press the auto eco button ( ), for 3 seconds to
activate this function. If the door remains closed
for a long time when this function is activated, the
cooler section will switch to economic mode. Press
the button again to deactivate this function.

The indicator will light up after 6 hours when the

auto eco function is active. ( )

13. Rapid freezing

Press the button ( ) for rapid freezing. Press the
button again to deactivate the function.

5.2. Humidity controlled crisper

(FreSHelf)
(This feature is optional)

Humidity rates of the vegetables and fruit are
kept under control with the feature of humidity­controlled crisper and the food is ensured to stay
fresh for longer.

We recommend you to place the leafy vegetables
such as lettuce, spinach and the vegetables which
are sensitive to humidity loss, in a horizontal
manner as much as possible inside the crisper, not
on their roots in a vertical position.

While the vegetables are being placed, specific
gravity of the vegetables should be taken into
consideration. Heavy and hard vegetables should
be put at the bottom of the crisper and the
lightweight and soft vegetables should be placed
over.

Never leave the vegetables inside the crisper
in their bags. If the vegetables are left inside
their bags, this will cause them to decompose
in a short period of time. In case contacting with
other vegetables is not preferred for hygiene
concerns, use a perforated paper and other similar
packaging materials instead of a bag.

Do not place together the pear, apricot, peach,
etc. and apple in particular which have a high level
of generation of ethylene gas in the same crisper
with the other vegetables and fruit. The ethylene
gas which is emitted by these fruit may cause
the other fruit to ripen faster and decompose in a
shorter time.

26 / 47 EN

Refrigerator / User Guide

Using the product

5.3. Activating water filter change warning

(For products connected to the mains water line and equipped with filter)

Water filter change warning is activated as follows:

Automatic filter usage time calculation is not enabled ex factory.
It must be enabled in products equipped with a filter.
The S4 display board we use in the refrigerator has a nine-key system.
Set values are shown in the display.

Freezer Set

Quick Freeze/

(Eco Fuzzy)

Alarm Off

Ice On/Off Dispenser

Mode

When the Key Lock

Filter reset

*(pressing 3 seconds)

After energising, press Alarm Off and Vacation buttons for 3 seconds to enter the password entry screen.

Password

Screen
(3 sec.)

Fridge Set

Quick Fridge

Vacation

Refrigerator / User Guide

27 / 47 EN

Using the product

Press once

Press twice

“Upon seeing PS 0 screen, de-energise the refrigerator and energise it again. This way, the filter counter
will be activated. The filter warning LED will be active on the display in 130 days. After replacing the filter
with a new one, press the Key Lock button for 3 seconds to make the filter counter to count down from
130 days.

Repeat the steps given above to cancel this function.”

Filter warning light

Press for 3 seconds while

the filter warning LED is ac-

tive to reset the filter time.

28 / 47 EN

Refrigerator / User Guide

Using the product

5.4. Using the water fountain

(for certain models)

The first few glasses of water taken from

C
C

You must wait approximately 12 hours to get cold
water after first operating.
Use the display to select the water option, then pull
the trigger to get water. Remove the glass shortly
after pulling the trigger.

the fountain will normally be warm.

If the water fountain is not used for a long
time, dispose of the first few glasses of
water to get clean water.

5.5. Filling the fountain water tank

Open the water tank’s lid, as shown in the figure.
Fill in pure and clean drinking water. Close the lid.

Refrigerator / User Guide

29 / 47 EN

Using the product

5.6. Cleaning the water tank

Remove the water filling reservoir inside the door
shelf.

Detach by holding both sides of the door
shelf.
Hold both sides of the water tank and remove at

45° angle.
Remove and clean the water tank lid.

Do not fill the water tank with fruit juice,
fizzy beverages, alcoholic beverages or
any other liquids incompatible for use in
the water fountain. Using such liquids
will cause malfunction and irreparable

A

A

damage in the water fountain. Using
the fountain in this way is not within the
scope of warranty. Such certain chemicals
and additives in the beverages / liquids
may cause material damage to the water
tank.

The water tank and water fountain
components cannot be washed with
dishwashers.

30 / 47 EN

Refrigerator / User Guide

Using the product

5.7. Taking ice / water

(Optional)

To take water ( ) / ice cube ( ) / fragmented
ice ( ), use the display to select the respective
option. Take water/ice by pushing the trigger
on the water fountain forward. When switching
between ice cube ( ) / fragmented ice ( )
options, the previous ice type may be discharged a
few more times.

• You must wait approximately 12 hours before
taking ice from the ice / water fountain for the
first time. The fountain may not discharge ice if
there is insufficient ice in the ice box.

• The 30 pieces of ice cubes (3-4 Litres) taken
after first operating should not be used.

• In case of power blackout or temporary
malfunction, the ice may partly melt and re­freeze. This will cause the ice pieces to merge
with each other. In case of extended power
blackouts or malfunction, the ice may melt
and leak out. If you experience this problem,
remove the ice in the ice box and clean the
box.

WARNING: The product’s water system

A

should be connected to cold water line
only. Do not connect to hot water line.

• The water may be cloudy during first use of
the filter; do not consume the first 10 glasses
of water.

• You must wait approximately 12 hours to get
cold water after first installation.

• The product’s water system is designed
for clean water only. Do not use any other
beverages.

• It is recommended to disconnect the water
supply if the product will not be used for long
periods during vacation etc.

• If the water fountain is not used for a long
time, the first 1-2 glasses of water received
may be warm.

5.8. Drip tray

(optional)

The water dripping from the water fountain
accumulates on the drip tray; no water drainage is
available. Pull the drip tray out or push on the edges
to remove the tray. You may then discharge the water
inside the drip tray.

• The product may not discharge water during
first operation. This is caused by the air in
the system. The air in the system must be
discharged. To do this, push the water fountain
trigger for 1-2 minutes until the fountain
discharges water. The initial water flow may be
irregular. The water will flow normally once the
air in the system is discharged.

Refrigerator / User Guide

31 / 47 EN

Using the product

5.9. Zero degree compartment

(Optional)

Use this compartment to keep delicatessen
at lower temperatures or meat products for
immediate consumption. Do not place fruits and
vegetables in this compartment. You can expand
the product's internal volume by removing any
of the zero degree compartments. To remove the
compartment, simply pull forth, lift up and pull out.

5.10. Vegetable bin

The refrigerator's vegetable bin is designed to
keep vegetables fresh by preserving humidity.
For this purpose, the overall cold air circulation is
intensified in the vegetable bin. Keep fruits and
vegetables in this compartment. Keep the green­leaved vegetables and fruits separately to prolong
their life.

5.11. Blue light

(Optional)

The product's vegetable bins comprise blue
light. The vegetables in the bin will continue
photosynthesize under the blue light's wavelength
effect and remain fresher for longer.

5.12. Ionizer

(Optional)

The ionizer system in the cooler compartment's
air duct serves to ionize the air. The negative
ion emissions will eliminate bacteria and other
molecules causing odour in the air.

5.13. Minibar

(Optional)

The refrigerator's minibar door shelf can be
accessed without opening the door. This will
allow you to easily take frequently consumed
food and beverages from the refrigerator. To open
the minibar cover, push with your hand and pull
towards yourself.

WARNING: Do not sit, hang or place

A

To close this compartment, simply push forward
from the upper section of the cover.

heavy objects on the minibar cover. This
may damage the product or cause you to
be injured.

5.14. Odour filter

(optional)

The odour filter in the cooler compartment's air
duct will prevent undesirable odour formation.

32 / 47 EN

Refrigerator / User Guide

Using the product

5.15. Icematic and ice storage box

(Optional)

Fill the icematic with water and put in place.
The ice will be ready after approximately two
hours. Do not remove the icematic to take the
ice.

Turn the buttons on the ice chambers right­hand side by 90°; the ice will fall to the ice sto­rage box below. You may then remove the ice
storage box and serve the ice.

The ice storage box is intended for

C

storing ice only. Do not fill with water.
Doing so will cause it to break.

5.16. Ice-maker

(Optional)

Ice maker is located on the upper section of the
freezer cover.

Hold the handles on the sides of the ice stock
reservoir and move up to remove.

Remove the ice-maker decorative lid by moving
up.

OPERATION
To remove the ice reservoir

Hold the ice stock reservoir from the handles, then
move up and pull the ice stock reservoir. (Figure 1)

To reinstall the ice reservoir

Hold the ice stock reservoir from the handles, move up
with an angle to fit the sides of the reservoir to their
slot and make sure that the ice selector pin is mounted
properly. (Figure 2)
Push downwards firmly, until there is no space left
between the reservoir and the door plastic. (Figure 2)

Refrigerator / User Guide

If you have difficulty in refitting the reservoir, turn the
rotary gear 90° and reinstall it as shown in the figure3.
Any sound you hear when the ice drops into the
reservoir is a part of normal operation.

33 / 47 EN

Using the product

When the ice dispenser does not work
properly

If you do not remove ice cubes for a long time, they
will cause formation of ice chunks. In this case, please
remove the ice stock reservoir in accordance with the
instructions given above, seperate the ice chunks,
discard the inseparable ice and put the ice cubes back
into the ice stock reservoir. (Figure 4)

When ice does not come out, check for any ice stuck
in the canal and remove it. Regularly check the ice
canal to clear the obstacles as shown in the figure 5.
When using your refrigerator for the first time or when
not using it for an extended period of time Ice cubes
may be small due to air in the pipe after connection,
any air will be purged during normal use.
Discard the ice produced for approximately one day
since the water pipe may contain the contaminants.

Caution!

Do not insert the hand or any other object into the ice
canal and blade since it may damage the parts or hurt
the hand.
Do not let the children hang on the ice dispenser or the
ice maker since it may cause an injury
To prevent dropping the ice stock reservoir use both
hands when removing it.
If you close the door hard, it may cause water spilling
over the ice stock reservoir.
Do not dismount the ice stock reservoir unless it is
necessary.

34 / 47 EN

Refrigerator / User Guide

Using the product

5.17. Freezing fresh food

• To preserve food quality, the food items placed
in the freezer compartment must be frozen as
quickly as possible, use the rapid freezing for
this.

• Freezing the food items when fresh will extend
the storage time in the freezer compartment.

• Pack the food items in air-tight packs and seal
tightly.

• Make sure the food items are packed before
putting in the freezer. Use freezer holders,
tinfoil and damp-proof paper, plastic bag
or similar packaging materials instead of
traditional packaging paper.

• Mark each food pack by writing the date on the
package before freezing. This will allow you to
determine the freshness of each pack every
time the freezer is opened. Keep the earlier
food items in the front to ensure they are used
first.

• Frozen food items must be used immediately
after defrosting and should not be frozen again.

• Do not free large quantities of food at once.

5.18. Recommendations for
storing frozen foods

The compartment must be set to at least -18°C.

1. Place the food items in the freezer as quickly

as possible to avoid defrosting.

2. Before freezing, check the “Expiry Date” on

the package to make sure it is not expired.

3. Make sure the food’s packaging is not

damaged.

5.19. Deep freezer details

As per the IEC 62552 standards, the freezer must
have the capacity to freeze 4,5 kg of food items at

-18°C or lower temperatures in 24 hours for each
100 litres of freezer compartment volume. Food
items can only be preserved for extended periods
at or below temperature of -18°C . You can keep
the foods fresh for months (in deep freezer at or
below temperatures of 18°C ).
The food items to be frozen must not contact
the already-frozen food inside to avoid partial
defrosting.
Boil the vegetables and filter the water to extend
the frozen storage time. Place the food in air-tight
packages after filtering and place in the freezer.
Bananas, tomatoes, lettuce, celery, boiled eggs,
potatoes and similar food items should not be
frozen. Freezing these food items will simply
reduce the nutritional value and food quality,
as well as possible spoiling which is harmful to
health.

Freezer

Compartment

Setting

-18°C 4°C This is the default, recommended setting.

-20,-22 -24°C 4°C

Rapid Freeze 4°C

-18°C or colder 2°C

Refrigerator / User Guide

Cooler

Compartment

Setting

Descriptions

These settings are recommended for ambient temperatures
exceeding 30°C.

Use this to freeze food items in a short time, the product will reset to
previous settings when the process is completed.

Use these settings if you believe the cooler compartment is not cold
enough due to ambient temperature or frequently opening the door.

35 / 47 EN

Using the product

5.20. Placing the food

Freezer
compartment
shelves

Cooler
compartment
shelves

Cooler
compartment
door shelves

Vegetable bin Fruits and vegetables
Fresh food

compartment

Various frozen goods including
meat, fish, ice cream,
vegetables etc.

Food items inside pots, capped
plate and capped cases, eggs
(in capped case)

Small and packed food or
beverages

Wrapped meat and fish products

5.21. Door open alert

(Optional)

An audible alert will be heard if the product's door
remains open for 1 minute. The audible alert will
stop when the door is closed or any button on the
display (if available) is pressed.

5.22. Interior light

Interior light uses a LED type lamp. Contact the
authorized service for any problems with this lamp.
The lamp(s) used in this appliance is not suitable
for household room illumination. The intended
purpose of this lamp is to assist the user to place
foodstuffs in the refrigerator/freezer in a safe and
comfortable way.

36 / 47 EN

Refrigerator / User Guide

6 Maintenance and cleaning

Cleaning your fridge at regular intervals will
extend the service life of the product.

WARNING: Unplug the product before

B

•Neverusegasoline,benzeneorsimilar

substances for cleaning purposes.

•Neveruseanysharpandabrasivetools,soap,

household cleaners, detergent and wax polish
for cleaning.

•Dissolveoneteaspoonofbi-carbonateinhalf

litre of water. Soak a cloth with the solution and
wrung it thoroughly. Wipe the interior of the re­frigerator with this cloth and the dry thoroughly.

•Makesurethatnowaterentersthelamphous­ing and other electrical items.

•Ifyouwillnotusetherefrigeratorforalong

period of time, unplug it, remove all food inside,
clean it and leave the door ajar.

•Checkregularlythatthedoorgasketsareclean.

If not, clean them.

•Toremovedoorandbodyshelves,removeallof

its contents.

Remove the door shelves by pulling them up.

After cleaning, slide them from top to bottom to
install.

• Never use cleaning agents or water that

cleaning it.

contain chlorine to clean the outer surfaces
and chromium coated parts of the product.
Chlorine causes corrosion on such metal
surfaces.

6.1 Avoiding bad odours

Materials that may cause odour are not used in
the production of our refrigerators. However, due
to inappropriate food preserving conditions and
not cleaning the inner surface of the refrigerator as
required can bring forth the problem of odour. Pay
attention to following to avoid this problem:

•Keepingtherefrigeratorcleanisimportant.

Food residuals, stains, etc. can cause odour.
Therefore, clean the refrigerator with bi­carbonate dissolved in water every few months.
Never use detergents or soap.

•Keepthefoodinclosedcontainers.

Microorganisms spreading out from uncovered
containers can cause unpleasant odours.

•Neverkeepthefoodthathavepassedbest

before dates and spoiled in the refrigerator.

6.2 Protecting the plastic surfaces

Do not put liquid oils or oil-cooked meals in your
refrigerator in unsealed containers as they damage
the plastic surfaces of the refrigerator. If oil is
spilled or smeared onto the plastic surfaces, clean
and rinse the relevant part of the surface at once
with warm water.

Refrigerator / User Guide

37 / 47 EN

6 Maintenance and cleaning

6.3 Cleaning of Glass Water Tank

Remove the water filling reservoir inside the
door rack.

Remove the door rack by holding from both
sides.

Remove the glass water tank cover by pressing
both sides.

Remove the hose connecting cover.

Remove the glass water tank with its case by
holding it from both sides and remove it with
an angle of 45°C.

Clean the glass water tank by removing its
case.

A

Do not let children hang on the glass
water tank since it may cause injury.

To prevent dropping the glass water tank
handle it with caution.
If you close the door hard, it may cause
water spilling from the glass water tank.
The glass water tank can be broken if it
is dropped.

38 / 47 EN

Refrigerator / User Guide

7. Troubleshooting

Check this list before contacting the service.
Doing so will save you time and money. This list
includes frequent complaints that are not related to
faulty workmanship or materials. Certain features
mentioned herein may not apply to your product.

The refrigerator is not working.

• The power plug is not fully settled.

>>> Plug it in to settle completely
into the socket.

• The fuse connected to the socket

powering the product or the main
fuse is blown. >>> Check the fuses.

Condensation on the side wall of the cooler
compartment (MULTI ZONE, COOL, CONTROL
and FLEXI ZONE).

• The door is opened too frequently

>>> Take care not to open the
product’s door too frequently.

• The environment is too humid. >>>

Do not install the product in humid
environments.

• Foods containing liquids are kept

in unsealed holders. >>> Keep the
foods containing liquids in sealed
holders.

• The product’s door is left open.

>>> Do not keep the product’s door
open for long periods.

• The thermostat is set to too

low temperature. >>> Set the
thermostat to appropriate
temperature.

Compressor is not working.

• In case of sudden power failure

or pulling the power plug off and
putting back on, the gas pressure
in the product’s cooling system is
not balanced, which triggers the
compressor thermic safeguard.
The product will restart after
approximately 6 minutes. If the
product does not restart after this
period, contact the service.

Refrigerator / User Guide

39 / 47 EN

• Defrosting is active. >>> This

is normal for a fully-automatic
defrosting product. The defrosting
is carried out periodically.

• The product is not plugged in.

>>> Make sure the power cord is
plugged in.

• The temperature setting

is incorrect. >>> Select the
appropriate temperature setting.

• The power is out. >>> The product

will continue to operate normally
once the power is restored.

The refrigerator’s operating noise is
increasing while in use.

• The product’s operating

performance may vary depending
on the ambient temperature
variations. This is normal and not a
malfunction.

The refrigerator runs too often or for too
long.

• The new product may be larger

than the previous one. Larger
products will run for longer
periods.

• The room temperature may be

high. >>> The product will normally
run for long periods in higher room
temperature.

• The product may have been

recently plugged in or a new food
item is placed inside. >>> The
product will take longer to reach
the set temperature when recently
plugged in or a new food item is
placed inside. This is normal.

• Large quantities of hot food may

have been recently placed into the
product. >>> Do not place hot food
into the product.

• The doors were opened frequently

or kept open for long periods. >>>
The warm air moving inside will

Troubleshooting

cause the product to run longer. Do
not open the doors too frequently.

• The freezer or cooler door may be

ajar. >>> Check that the doors are
fully closed.

• The product may be set to

temperature too low. >>> Set the
temperature to a higher degree
and wait for the product to reach
the adjusted temperature.

• The cooler or freezer door washer

may be dirty, worn out, broken or
not properly settled. >>> Clean or
replace the washer. Damaged /
torn door washer will cause the
product to run for longer periods to
preserve the current temperature.

The freezer temperature is very low, but the
cooler temperature is adequate.

• The freezer compartment

temperature is set to a very
low degree. >>> Set the freezer
compartment temperature to a
higher degree and check again.

The cooler temperature is very low, but the
freezer temperature is adequate.

• The cooler compartment

temperature is set to a very
low degree. >>> Set the freezer
compartment temperature to a
higher degree and check again.

The food items kept in cooler compartment
drawers are frozen.

• The cooler compartment

temperature is set to a very
low degree. >>> Set the freezer
compartment temperature to a
higher degree and check again.

The temperature in the cooler or the freezer
is too high.

• The cooler compartment

temperature is set to a very high
degree. >>> Temperature setting
of the cooler compartment has

an effect on the temperature in
the freezer compartment. Wait
until the temperature of relevant
parts reach the sufficient level
by changing the temperature of
cooler or freezer compartments.

• The doors were opened frequently

or kept open for long periods.
>>> Do not open the doors too
frequently.

• The door may be ajar. >>> Fully

close the door.

• The product may have been

recently plugged in or a new
food item is placed inside. >>>
This is normal. The product
will take longer to reach the
set temperature when recently
plugged in or a new food item is
placed inside.

• Large quantities of hot food may

have been recently placed into the
product. >>> Do not place hot food
into the product.

Shaking or noise.

• The ground is not level or durable.

>>> If the product is shaking when
moved slowly, adjust the stands to
balance the product. Also make
sure the ground is sufficiently
durable to bear the product.

• Any items placed on the product

may cause noise. >>> Remove any
items placed on the product.

The product is making noise of liquid
flowing, spraying etc.

• The product’s operating principles

involve liquid and gas flows.
>>> This is normal and not a
malfunction.

There is sound of wind blowing coming from
the product.

40 / 47 EN

Refrigerator / User Guide

Troubleshooting

• The product uses a fan for the

cooling process. This is normal and
not a malfunction.

There is condensation on the product’s
internal walls.

• Hot or humid weather will increase

icing and condensation. This is
normal and not a malfunction.

• The doors were opened frequently

or kept open for long periods.
>>> Do not open the doors too
frequently; if open, close the door.

• The door may be ajar. >>> Fully

close the door.

There is condensation on the product’s
exterior or between the doors.

• The ambient weather may be

humid, this is quite normal
in humid weather. >>> The
condensation will dissipate when
the humidity is reduced.

The interior smells bad.

• The product is not cleaned

regularly. >>> Clean the interior
regularly using sponge, warm
water and carbonated water.

• Certain holders and packaging

materials may cause odour.
>>> Use holders and packaging
materials without free of odour.

• The foods were placed in unsealed

holders. >>> Keep the foods in
sealed holders. Micro-organisms
may spread out of unsealed
food items and cause malodour.
Remove any expired or spoilt foods
from the product.

The door is not closing.

• Food packages may be blocking

the door. >>> Relocate any items
blocking the doors.

• The product is not standing in full

upright position on the ground. >>>

Adjust the stands to balance the
product.

• The ground is not level or durable.

>>> Make sure the ground is level
and sufficiently durable to bear the
product.

The vegetable bin is jammed.

• The food items may be in contact

with the upper section of the
drawer. >>> Reorganize the food
items in the drawer.

If The Surface Of The Product Is Hot.

• High temperatures may be

observed between the two doors,
on the side panels and at the rear
grill while the product is operating.
This is normal and does not
require service maintenance!Be
careful when touching these areas.

A WARNING:

If the problem persists after following the
instructions in this section, contact your vendor
or an Authorised Service. Do not try to repair the
product.

Refrigerator / User Guide

41 / 47 EN

BEKO UK AND IRELAND STANDARD MANUFACTURER GUARANTEE TERMS AND CONDITIONS

Your new Beko product is guaranteed against faulty materials, defective components or manufacturing
defects.

The standard guarantee starts from the date of original purchase of the product, and lasts for a period of
twelve (12) months unless Beko plc (the “Manufacturer”) agrees to extend the guarantee for the product
in writing.

If you have purchased an American style Fridge freezer, the standard guarantee starts from the date of
original purchase of the product, and lasts for a period of twenty four (24) months unless Beko plc (the
“Manufacturer”) agrees to extend the guarantee for the product in writing.

If you have any questions about the guarantee on your product (including how long it is valid), please
contact your retailer or our contact centre on

0333 207 971(UK and Northern Ireland) or 01 862 3411 (Republic of Ireland)
This guarantee does not in any way diminish or affect your statutory rights in connection with the

product. This guarantee is in addition to your statutory rights as a consumer. If you have any questions
about these rights, please contact the retailer from which you purchased the product. In certain
circumstances, it is possible that your statutory rights may offer additional or higher levels of protection
than those offered under the terms of this guarantee.

What is covered by this guarantee?

• Repairs to the product required as a result of faulty materials, defective components or manufacturing
defects.

• Functional replacement parts to repair a product.

• The costs of a Beko Approved Engineer to carry out the repair.

What is not covered?

• Transit and delivery damage.

• Cabinet or appearance parts, including but not limited to control knobs, flaps and handles.

• Accessories and/or consumable items including but not limited to ice trays, scrapers, cutlery baskets,

filters and light bulbs.

• Repairs necessary as a direct or indirect result of:

- Accidental damage, misuse or abuse of a product.

- An attempted repair of a product by anyone other than a Beko Approved Engineer (the
“Engineer”).

- Installation or use of a product where such installation or use fails to meet the requirements
contained in this guarantee or the User Instructions Booklet.

• Repairs to a product operated at any time on commercial or non-residential household premises (unless
we have previously agreed to the installation environment).

This guarantee is limited to the cost of repairing the product. To the extent permitted by law, the
Manufacturer does not accept and will not be held liable for any financial loss incurred in connection
with the failure of any product to operate in accordance with the expected standards. Such financial loss
includes but is not limited to loss arising from:

42 / 47 EN

Refrigerator / User Guide

• Time taken off work.

• Damaged food, clothing or other items.

• Meals taken at restaurants or from takeaways.

• General compensation for inconvenience.

Important Notes

1. Your product is designed and built for domestic household use only.

2. The guarantee will automatically be void if the product is installed or is used in commercial

or non-residential domestic household premises, unless we have previously agreed to the installation
environment.

3. The product must be correctly installed, located and operated in accordance with the instructions

contained in the User Instructions Booklet provided with your product.

4. Professional installation by a qualified Electrical Domestic Appliance Installer is recommended
for all Washing Machines, Dishwashers and Electric Cookers (as incorrect installation may result in you
having to pay for the cost of repairing the product).

5. Gas Cookers must be professionally installed by a Gas Safe (or Gas Networks Ireland for Republic
of Ireland) registered gas installer.

6. This guarantee is given in respect of products purchased and used within the United Kingdom
and the Republic of Ireland.

7. This guarantee is effective from the initial date of purchase of a new product from an authorised
retailer and will be void if the product is resold.

8. This guarantee does not apply to graded sales (where the product is purchased as a “second”).

9. Possession of a copy of these terms and conditions does not necessarily mean that a product

has the benefit of this guarantee. If you have any questions, please call our Call Centre on the number
set out above.

10. The Manufacturer reserves the right to terminate the guarantee if its staff or representatives are
subjected to physical or verbal abuse in the course of carrying out their duties.

11. Optional extras, where available (i.e. extendable feet) are supplied on a chargeable basis only.

Does Beko offer replacements?

This is a repair-only guarantee. On occasion, the Manufacturer may at its sole discretion, replace your
product with a new product instead of carrying out a repair. Where a replacement is offered, this would
normally be an identical model but when this is not possible, a model of similar specification will be
provided. The Manufacturer will cover the costs and arrange for the delivery of the new product and for
the return of the old product. Any costs related to disconnecting the faulty product and installing the
replacement product will not be borne by the Manufacturer unless previously agreed to in writing. The
original guarantee will continue to apply to the replacement product; the new product will not come with
a new guarantee.

Refrigerator / User Guide

43 / 47 EN

When will the repair take place?

Our Engineers work Monday to Friday 9.00am to 5.00pm. Appointments outside these hours may be
possible at the sole discretion of the Manufacturer but cannot be guaranteed. Whilst our Engineers will
endeavour to minimize inconvenience and to meet requests for specific timed appointments, this cannot
be guaranteed. We will not be liable for delays or if it is unable to carry out a repair because a convenient
appointment cannot be arranged.

Will there be any charge for the repairs?

It is your responsibility to provide evidence to the Engineer that your product is covered by this guarantee with a
proof of purchase. The Manufacturer reserves the right to charge for the reasonable cost of any service call if:

• You cannot provide evidence that your product is covered by this guarantee.

• Where a service call has been made and the engineer finds that there is no fault with your product.

• That your product has not been installed or operated in accordance with the User Instructions Booklet.

• That the fault was caused by something other than faulty materials, defective components or

manufacturing defects.

• For missed appointments.

Payment of these costs are due immediately upon the Engineer providing you with an invoice. The
Manufacturer reserves the right to terminate the guarantee if you fail to pay the costs for the service call
in a timely manner.

If you are a resident of the United Kingdom, this guarantee will be governed by English law and subject to
the English Courts, save where you live in another part of the United Kingdom, in which case the law and
courts of that location will apply.

If you are resident in the Republic of Ireland, this guarantee will be governed by Irish law and the Irish
courts will have jurisdiction.

This guarantee is provided by Beko plc. Beko House, 1 Greenhill Crescent, Watford, Hertfordshire. WD18
8QU.

Beko plc is registered in England and Wales with company registration
number 02415578

BEKO UK AND IRELAND BUILT-IN APPLIANCES GUARANTEE TERMS AND CONDITIONS

If you have purchased a built-in or integrated appliance, and registered it within 90 days of purchase
by completing the online registration form, then the standard 12 month guarantee will be extended to
24 months, under the same terms and conditions as detailed in our Standard Guarantee Terms and
Conditions.

44 / 47 EN

Refrigerator / User Guide

BEKO UK AND IRELAND PROSMART INVERTER MOTOR GUARANTEE TERMS AND CONDITIONS

This 10 year guarantee relates to Beko products that feature the ProSmart Inverter Motor.

The ProSmart Motor guarantee terms and conditions are in addition to our Standard guarantee terms
and conditions detailed in the previous section.

In order to activate the 10 year guarantee you MUST register the appliance within 90 days
of the original purchase date. You can register by first visiting Beko.co.uk/register and by
following the online instructions.

Beko Free standing appliances come with a 12 month parts and labour guarantee as standard,

Beko Built-in appliances come with a 12 month parts and labour guarantee as standard. This is
extended to 24 months, free of charge, upon registration of the appliance. When you register your
appliance for additional guarantee, you will automatically activate the ProSmart Motor 10 year
guarantee. You do not need to register twice. (beko.co.uk/guarantee-terms).

To make a claim against your Beko ProSmart Inverter Motor Guarantee (the “Guarantee”), all customer
and product details must be registered with Beko plc using the procedure outlined below.

1. This extra 9 years (for free standing appliances) or 8 years (for built-in or integrated appliances)

guarantee is only effective after the expiration of the standard manufacturer’s guarantee.

2. It is only valid for the ProSmart Inverter motors of selected washing machines, washer-dryers,
tumble dryers and dishwashers. It does not cover any labour charge or any other components of the
product. In addition, it is only valid for one replacement of the ProSmart motor during the extra 9-year
(for free standing appliances) or 8 year (for built-in appliances) guarantee period.

3. To activate your guarantee, you MUST register your appliance within 90 days of the original
purchase date, by visiting beko.co.uk/register.

4. Customers will receive a unique reference code as proof of guarantee validation by email or
post, which must be quoted at the time of a claim being made.

5. Any repair/replacement of the ProSmart Inverter motor must only be carried out by an
authorised Beko Service Agent (the “Service Agent”).

6. Labour for the repair/replacement of the ProSmart Inverter motor is not included in this
guarantee and is chargeable directly by the Service Agent.

7. Any additional components fitted to the product at any time will not be covered by this
guarantee and will be chargeable directly by the Service Agent.

8. The guarantee is not transferable and cannot be exchanged for cash.

9. There are no alternative or additional offers to this Guarantee.

10. The guarantee is exclusive of the manufacturer’s standard guarantee

11. The Terms and Conditions shown above are in addition to the standard terms and conditions of

your product guarantee. Please read and refer to such Terms and Conditions when making any claim.

Refrigerator / User Guide

45 / 47 EN

12. We may use the information you provide for marketing purposes and to analyse your purchasing
preferences. We may keep your information for a reasonable period for these purposes in accordance
with the applicable Data Protection Laws and General Data Protection Regulations (GDPR). You can opt
into this service during the registration process. Further details are available at http://www.beko.co.uk/
cookie-and-privacy.

13. These Terms and Conditions are governed by the laws of England and Wales; manufacturer: Beko
plc, Beko House, 1 Greenhill Crescent, Watford WD18 8QU. Company Registration Number: 02415578.

HOW TO OBTAIN SERVICE FOR YOUR APPLIANCE

Please keep your purchase receipt or other proof of purchase details in a safe place; you will need to have
this documentation available should the product require attention under guarantee.

Please take a few moments to complete the details below, as you will need this information when you call
us, or to use our online services. When you call us you may be required to input your serial number into
your telephone keypad. For help please visit beko.co.uk/support/model-finder

• The product model number is printed on the Operating Instruction Booklet / User guide

• The product model and serial number is printed on the Rating Label affixed to the appliance.

• The Retailer (Purchased from) and Date of purchase will be printed on your purchase receipt or other

proof of purchase paperwork
Recording of these details alone will not count as proof of purchase. A valid proof of purchase is required for
requesting service under guarantee.

Model number Serial number Purchased from Date of purchase

For service under guarantee or for product advice please call our Contact centre

Before requesting service please check the troubleshooting guide in the Operating Instructions booklet,
as a charge may be levied where no fault is found, and even though your product may still be under
guarantee.

After arranging service the area around the product must be easily accessible to the Engineer, without the
need for cabinets or furniture to be removed or moved.

It is your responsibility to ensure our Engineers have a clean and safe environment to carry out any
repairs.

Please have your Model number and Serial number available when you call us, as you may be required to
input your serial number into your telephone keypad during your call.

46 / 47 EN

Refrigerator / User Guide

UK Mainland & Northern Ireland:

0333 207 9710

Landline or mobile calls to 0333 numbers cost no more than calls to geographic
numbers 01 or 02, and are charged at the basic rate. Calls from landlines and mobiles
are included in free call packages but please check with your telephone service
provider for exact call charges.

Republic of Ireland:

01 862 3411

Service once the manufacturers guarantee has expired

If you have purchased an extended guarantee please refer to the instructions
contained within the extended guarantee agreement document, otherwise please call
us using the appropriate number above, where service can be obtained at a charge.

Should you experience any difficulty in obtaining service please call us on 0333 207 9710
or 01 862 3411

Contact us though our website

Send us a secure message through our online contact us form. Please visit our website, click Contact Us
and choose a product support topic from the list of options. Complete the required details and click send
message.

Product registrations

For UK registrations please visit beko.co.uk/register and for the Republic of Ireland visit beko.ie/register.

Refrigerator / User Guide

47 / 47 EN

57 7093 0000/AT