Beko HPS-100 User Manual

Model No: HPS-100

HOME THEATRE SPEAKER SET

Thank you very much for purchasing our product. Please read this
instruction manual completely before connecting and operating the
machine for best performance and safety.

Contents

1. Contents/Features

2. Precautions

3. Safety Warnings

4. Front Panel Operation

5. Rear Panel Setting

6. Connection with Sound Source and Satellites

7. Operation Instruction

8. Trouble Shooting

9. Specifications

Features

1. 5.1 channel connection to DVD player

2. Compatible with AC-3 & DTS connection

3. Individual Woofer Volume Adjust

4. Master Volume Adjust

5. Ultra slim card-like size remote control

6. Satellites are desk & wall-mountable

Precautions

CAUTION: To reduce the risk of electric shock, do not remove the

cover or back. Refer servicing to qualified service personnel.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert
the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to consti tute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
The apparatus should not be exposed to dripping or splashing area. No objects filled with

liquids, such as vases, should be placed on the apparatus.

Safety Warnings

Leave 15cm for ventilation. Do not block the pipe of the subwoofer.

Do not open the cover and do not repair yourself. Do not function the system when liquid
Refer servicing to qualified personnel. gets into the subwoofer.

Do not climb on this system. Pull out the plug while smoke,

particular smell or noise inside.

Front panel operation

1. Remote sensor

2. Power LED light

3. Power On/ Off Button

Rear panel setting

1.Front Left and Right Input terminal

2.Center Input terminal

3.Subwoofer Input terminal

4.Rear Left and Right Input terminal

5. Front Right channel speaker input terminal

6. Front Left channel speaker input terminal

7. Rear right channel speaker input terminal

8. Center channel speaker input terminal

9. Rear left channel speaker input terminal

Connections with sound source and satellites

1. Connection with sound source equipment

2. Connection with satellite speakers

FUSE

Operation instructions

1. Stereo / 5.1 Mode Selection

For stereo mode, please connect the sound source with Front L and Front R input terminal.
This unit is AC-3 and DTS compatible. For 5.1 sound effect, please connect it with 5.1 input
terminals.

2. Power On

Front panel operation

Press the Power button and once LED light flickers, this product is connected with power.

3. Master and Woofer Volume adjust

Remote control operation

①. Press button of “Master ∧ ” or “Master ∨ ” to increase or decrease the volume of whole

speaker system.

②. Press button of “Woofer ∧ ” or “Woofer ∨ ” to increase or decrease the volume of whole

speaker system.

4. Power off

Front Panel Operation

Press the Power button again and once LED light diminishes, this product is disconnected
from power.

Trouble Shooting

Problem Cause Solution

No sound

Sound distortion

Sound only from
one channel

Remote control
fails to work

z Improper connection of

speaker terminal.

z Improper connection of

sound frequency
terminal.

z Improper connection of

AC plug and the socket.

z Volume is too low.
z The speaker terminal is

short-circuited

z Improper connection of

amplifier input terminal.

z The volume is too high.

z Improper connection of

amplifier input terminal

z Input level is too high
z The battery has gone

off.

z Interference by strong

and direct sunlight.

z Ensure that the equipment

is connected properly.

z Ensure that the sound

frequency is connected
properly.

z Insert the AC plug securely

into the AC outlet.

z Increase the volume with

volume controlling button.

z Cut off power, reconnect

the speaker, then start the
power again.

z Ensure that the input

terminal is connected
properly.

z Lower the volume with

volume controlling button.

z Ensure that the input

terminal is connected
properly

z Adjust the woofer and

master volume properly

z Replace with new

batteries.

z Keep the sensor away

from sunlight.

z Obstacle in front of the

sensor.

z Remove the obstacle.

Technical Data

Model No.:
Power/Frequency:
Watts: Subwoofer: 30W Satellite: 15WX5

230 V ~50Hz