Beko GN163130ZX User manual [EN,VN]

GN163130ZX

EN VN

Please read this manual before using the product!

Dear Customer, We'd like you to make the best use of our product, which has been manufactured in modern facilities

with care and meticulous quality controls. Thus, we advice you to read the entire user manual before you use the product. In case the product

changes hands, do not forget to hand the guide to its new owner along with the product.

This guide will help you use the product quickly and safely.

• Please read the user guide carefully before installing and operating the product.

• Always observe the applicable safety instructions.

• Keep the user guide within easy reach for future use.

• Please read any other documents provided with the product.

Keep in mind that this user guide may apply to several product models. The guide clearly indicates any variations of different models.

Important information and useful

tips.

Risk of life and property.

Risk of electric shock.

The product’s packaging is made of recyclable materials, in accordance with the National Environment Legislation.

Table of Contents

1. Safety and environment instructions 3

1.1. General safety. . . . . . . . . . . . . . . . . . . . . . . 3

1.1.1 HC warning. . . . . . . . . . . . . . . . . . . . . . . . 4

1.1.2 For models with water dispenser . . . . . . . . 4

1.2. Intended use. . . . . . . . . . . . . . . . . . . . . . . . 5

1.3. Child safety. . . . . . . . . . . . . . . . . . . . . . . . . 5

1.4. Compliance with WEEE Directive and

Disposing of the Waste Product . . . . . . . . . 5

1.5. Compliance with RoHS Directive . . . . . . . . . 5

1.6. Package information . . . . . . . . . . . . . . . . . . 5

2 Refrigerator 6

2 Refrigerator 7

3 Installation 8

3.1. Right place for installation . . . . . . . . . . . . . . 8

3.2. Attaching the plastic wedges. . . . . . . . . . . . 8

3.3. Adjusting the stands . . . . . . . . . . . . . . . . . . 9

3.4. Power connection . . . . . . . . . . . . . . . . . . . . 9

3.5. Water connection . . . . . . . . . . . . . . . . . . . 10

3.6. Connecting water hose to the product . . . . 11

3.7. Connecting to water mains . . . . . . . . . . . . 11

3.8. For products using water carboy . . . . . . . . 12

3.9 Water filter. . . . . . . . . . . . . . . . . . . . . . . . . 12

3.9.1.Fixing external filter on the wall (Optional) 13

3.9.2.Internal filter . . . . . . . . . . . . . . . . . . . . . . 14

4 Preparation 16

4.1. What to do for energy saving. . . . . . . . . . . 16

4.2. First Use . . . . . . . . . . . . . . . . . . . . . . . . . . 16

5 Using the product 17

5.1. Indicator panel . . . . . . . . . . . . . . . . . . . . . 17

5.2. Activating water filter change warning . . . . 25

5.3. Using the water fountain . . . . . . . . . . . . . . 27

5.4. Filling the fountain water tank . . . . . . . . . . 27

5.5. Cleaning the water tank. . . . . . . . . . . . . . . 27

5.6. Humidity controlled crisper . . . . . . . . . . . . 28

5.7. Taking ice / water . . . . . . . . . . . . . . . . . . . 29

5.8. Drip tray . . . . . . . . . . . . . . . . . . . . . . . . . 29

5.9. Zero degree compartment. . . . . . . . . . . . . 30

5.10. Vegetable bin . . . . . . . . . . . . . . . . . . . . . 30

5.11. Blue light . . . . . . . . . . . . . . . . . . . . . . . . 30

5.12. Ionizer . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

5.13. Minibar . . . . . . . . . . . . . . . . . . . . . . . . . . 30

5.14. Odour filter . . . . . . . . . . . . . . . . . . . . . . . 30

5.15. Icematic and ice storage box . . . . . . . . . . 31

5.16. Ice-maker . . . . . . . . . . . . . . . . . . . . . . . . 31

5.17. Freezing fresh food . . . . . . . . . . . . . . . . . 33

5.18. Recommendations for storing frozen foods 33

5.19. Deep freezer details . . . . . . . . . . . . . . . . . 33

5.20. Placing the food. . . . . . . . . . . . . . . . . . . . 34

5.21. Door open alert . . . . . . . . . . . . . . . . . . . . 34

5.22. Interior light . . . . . . . . . . . . . . . . . . . . . . . 34

6 Maintenance and cleaning 35

6.1. Preventing malodour . . . . . . . . . . . . . . . . . 35

6.2. Protecting plastic surfaces . . . . . . . . . . . . 35

7. Troubleshooting 36

2 / 38 EN

Refrigerator / User Guide

1. Safety and environment instructions

This section provides the safety instructions necessary to prevent the risk of injury and material damage. Failure to observe these instructions will invalidate all types of product warranty.

Intended use

WARNING:

Keep ventilation openings, in the appliance enclosure or in

This appliance is intended to be used in household and similar applications such as – staff kitchen areas in shops, offices and other working environments; – farm houses and by clients in hotels, motels and other residential type environments; – bed and breakfast type environments; – catering and similar non-retail applications.

Refrigerator / User Guide

the built-instructure, clear of obstruction.

WARNING:

Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

WARNING:

Do not damage the refrigerant circuit.

WARNING:

Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

1.1. General safety

• This product should not be used by

• In case of malfunction, unplug the device.

• After unplugging, wait at least 5 minutes

• Unplug the product when not in use.

• Do not touch the plug with wet hands! Do

• Do not plug in the refrigerator if the socket

• Unplug the product during installation,

• If the product will not be used for a while,

• Do not use the product when the

• Do not use steam or steamed cleaning

3 / 38 EN

persons with physical, sensory and mental disabilities, without sufficient knowledge and experience or by children. The device can only be used by such persons under supervision and instruction of a person responsible for their safety. Children should not be allowed to play with this device.

before plugging in again.

not pull the cable to plug off, always hold the plug.

is loose.

maintenance, cleaning and repair.

unplug the product and remove any food inside.

compartment with circuit cards located on the upper back part of the product (electrical card box cover) (1) is open.

materials for cleaning the refrigerator and melting the ice inside. Steam may contact the electrified areas and cause short circuit or electric shock!

Safety and environment instructions

• Do not wash the product by spraying or

pouring water on it! Danger of electric shock!

• In case of malfunction, do not use the

product, as it may cause electric shock. Contact the authorised service before doing anything.

• Plug the product into an earthed socket.

Earthing must be done by a qualified electrician.

• If the product has LED type lighting,

contact the authorised service for replacing or in case of any problem.

• Do not touch frozen food with wet

hands! It may adhere to your hands!

• Do not place liquids in bottles and cans

into the freezer compartment. They may explode.

• Place liquids in upright position after

tightly closing the lid.

• Do not spray flammable substances

near the product, as it may burn or explode.

• Do not keep flammable materials and

products with flammable gas (sprays, etc.) in the refrigerator.

• Do not place containers holding liquids

on top of the product. Splashing water on an electrified part may cause electric shock and risk of fire.

• Exposing the product to rain, snow,

sunlight and wind will cause electrical danger. When relocating the product, do not pull by holding the door handle. The handle may come off.

• Take care to avoid trapping any part of

your hands or body in any of the moving parts inside the product.

• Do not step or lean on the door, drawers

and similar parts of the refrigerator. This will cause the product to fall down and cause damage to the parts.

• Take care not to trap the power cable.

1.1.1 HC warning

If the product comprises a cooling system using R600a gas, take care to avoid damaging the cooling system and its pipe while using and moving the product. This gas is flammable. If the cooling system is damaged, keep the product away from sources of fire and ventilate the room immediately.

1.1.2 For models with water dispenser

• Pressure for cold water inlet shall be

• If there is risk of water hammer effect

• Do not install on the hot water inlet.

• Use drinking water only.

4 / 38 EN

The label on the inner left side indicates the type of gas used in the product.

maximum 90 psi (6.2 bar). If your water pressure exceeds 80 psi (5.5 bar), use a pressure limiting valve in your mains system. If you do not know how to check your water pressure, ask for the help of a professional plumber.

in your installation, always use a water hammer prevention equipment in your installation. Consult Professional plumbers if you are not sure that there is no water hammer effect in your installation.

Take precautions against of the risk of freezing of the hoses. Water temperature operating interval shall be 33°F (0.6°C) minimum and 100°F (38°C) maximum.

Refrigerator / User Guide

Safety and environment instructions

1.2. Intended use

• This product is designed for home use.

It is not intended for commercial use.

• The product should be used to store

food and beverages only.

• Do not keep sensitive products

requiring controlled temperatures (vaccines, heat sensitive medication, medical supplies, etc.) in the refrigerator.

• The manufacturer assumes no

responsibility for any damage due to misuse or mishandling.

• Original spare parts will be provided

for 10 years, following the product purchasing date.

1.3. Child safety

• Keep packaging materials out of

children’s reach.

• Do not allow the children to play with

the product.

• If the product’s door comprises a lock,

keep the key out of children’s reach.

1.6. Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

1.4. Compliance with WEEE Directive and Disposing of the Waste Product

This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).

This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its

service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.

1.5. Compliance with RoHS Directive

• This product complies with EU WEEE Directive

(2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

Refrigerator / User Guide

5 / 38 EN

2 Refrigerator

*11

*16

*17

*18

1- Freezer compartment 2- Cooler compartment 3- Fan 4- Butter-cheese compartment 5- Glass shelves 6- Cooler compartment door shelves 7- Minibar accessory 8- Water tank 9- Bottle holder

10- Odour filter 11- Zero degree compartment 12- Vegetable bins 13- Adjustable stands 14- Frozen food storing compartments 15- Freezer compartment door shelves 16- Icematics 17- Ice storage box 18- Ice-maker decorative lid

*Optional

*Optional: Figures in this user guide are schematic and may not be exactly match your product. If your product does not comprise the relevant parts, the information pertains to other models.

6 / 38 EN

Refrigerator / User Guide

2 Refrigerator

*14

*Optional: Figures in this user guide are schematic and may not be exactly match your product. If your product does not comprise the relevant parts, the information pertains to other models.

Refrigerator / User Guide

7 / 38 EN

3 Installation

3.1. Right place for installation

Contact the Authorized Service for the product's installation. To ready the product for installation, see the information in the user guide and make sure the electric and water utilities are as required. If not, call an electrician and plumber to arrange the utilities as necessary.

WARNING: The manufacturer assumes

no responsibility for any damage caused

B B

•Placetheproductonaflatsurfacetoavoid

vibration.

•Placetheproductatleast30cmawayfromthe

heater, stove and similar sources of heat and at least 5 cm away from electric ovens.

•Donotexposetheproducttodirectsunlightor

keep in damp environments.

•Theproductrequiresadequateaircirculationto

function efficiently. If the product will be placed in an alcove, remember to leave at least 5 cm distance between the product and the ceiling and the walls.

•Donotinstalltheproductinenvironmentswith

temperatures below -5°C.

by the work carried out by unauthorized persons.

WARNING: The product’s power cable

must be unplugged during installation. Failure to do so may result in death or serious injuries!

WARNING: : If the door span is too

narrow for the product to pass, remove the door and turn the product sideways; if this does not work, contact the authorized service.

3.2. Attaching the plastic wedges

Use the plastic wedges in the provided with the product to provide sufficient space for air circulation between the product and the wall.

To attach the wedges, remove the screws on the

product and use the screws provided with the wedges.

Attach 2 plastic wedges on the ventilation cover

shown as j in the figure.

8 / 38 EN

Refrigerator / User Guide

Installation

3.3. Adjusting the stands

If the product is not in balanced position, adjust the front adjustable stands by rotating right or left.

In order to adjust the doors vertically,

•Loosenthefixingnutatthebottom

•Screwadjustingnut(CW/CCW)accordingtothe

position of the door

•Tightenthefixingnutforthefinalposition

In order to adjust the doors horizontally,

• Loosen the fixing bolt on the top

• Screw the adjusting bolt (CW/CCW) on the side

according to the position of the door

• Tighten the fixing bolt on the top for the final

position

3.4. Power connection

WARNING: Do not use extension or multi

A B

• Our firm will not assume responsibility for any

• The power cable plug must be easily

• Connect the refrigerator to an earthed socket

• Do not use multi-group plug with or without

sockets in power connection.

WARNING: Damaged power cable must

be replaced by Authorized Service.

When placing two coolers in adjacent position, leave at least 4 cm distance between the two units.

damages due to usage without earthing and power connection in compliance with national regulations.

accessible after installation.

with 220-240V/50 Hz voltage. The plug must comprise a 10-16A fuse.

extension cable between the wall socket and the refrigerator.

adjusting nut

Refrigerator / User Guide

adjusting nut

ﬁxing nut

9 / 38 EN

Installation

3.5. Water connection

(Optional)

WARNING: Unplug the product and

the water pump (if available) during

The product’s water mains, filter and carboy connections must be rendered by authorizer service. The product can be connected to a carboy or directly to the water mains, depending on the model. To establish the connection, the water hose must first be connected to the product. Check to see the following parts are supplied with your product’s model:

connection.

1. Connector (1 piece): Used to attach the water

hose to the rear of the product.

2. Hose clip (3 pieces): Used to fix the water

hose on the wall.

3. Water hose (1 piece, 5 meter diameter 1/4

inches): Used for the water connection.

4. Faucet adapter (1 piece): Comprises a porous

filter, used for connection to the cold water mains.

5. Water filter (1 piece *Optional): Used to

connect the mains water to the product. Water filter is not required if carboy connection is available.

10 / 38 EN

Refrigerator / User Guide

Installation

3.6. Connecting water hose to the product

To connect the water hose to the product, follow the instructions below.

1. Remove the connector on the hose nozzle

adaptor in the back of the product and run the hose through the connector.

3.7. Connecting to water mains

(Optional)

To use the product by connecting to the cold water mains, a standard 1/2” valve connector must be installed to the cold water mains in your home. If the connector is not available or if you are unsure, consult a qualified plumber.

1. Detach the connector (1) from the faucet

adaptor (2).

2. Push the water hose down tightly and connect

to the hose nozzle adaptor.

3. Tighten the connector manually to fix on the

hose nozzle adaptor. You may also tighten the connector using a pipe wrench or pliers.

2. Connect the faucet adaptor to the water mains

valve.

3. Attach the connector around the water hose.

4. Connect the other end of the hose to the

water mains (See Section 3.7) or, to use carboy, to the water pump (See Section 3.8).

Refrigerator / User Guide

11 / 38 EN

Installation

4. Attach the connector into the faucet adaptor

and tighten by hand / tool.

5. To avoid damaging, shifting or accidentally

disconnecting the hose, use the clips provided to fix the water hose appropriately.

2. Connect the other end of the water hose to

the water pump by pushing the hose into the pump’s hose inlet.

3. Place and fasten the pump hose inside the

carboy.

WARNING: After turning the faucet

on, make sure there is no water leak on

either end of the water hose. In case of leakage, turn the valve off and tighten all connections using a pipe wrench or pliers.

3.8. For products using water carboy

(Optional)

To use a carboy for the product’s water connection, the water pump recommended by the authorized service must be used.

1. Connect one end of the water hose provided

with the pump to the product (see 3.6) and follow the instructions below.

4. Once the connection is established, plug in

and start the water pump.

Please wait 2-3 minutes after starting the pump to achieve the desired

C C C

efficiency.

See also the pump’s user guide for water connection.

When using carboy, water filter is not required.

3.9 Water filter

(Optional)

The product may have internal or external filter, depending on the model. To attach the water filter, follow the instructions below.

12 / 38 EN

Refrigerator / User Guide

Installation

3.9.1.Fixing external filter on the wall (Optional)

WARNING: Do not fix the filter on the

Check to see the following parts are supplied with your product’s model:

product.

4. Attach the water hose extending from the top

of the filter to the product’s water connection adaptor, (see 3.6.)

1. Connector (1 piece): Used to attach the water

hose to the rear of the product.

2. Faucet adapter (1 piece): Used for connection

to the cold water mains.

3. Porous filter (1 piece)

4. Hose clip (3 pieces): Used to fix the water

hose on the wall.

5. Filter connecting apparatus (2 pieces): Used to

fix the filter on the wall.

6. Water filter (1 piece): Used to connect the

product to the water mains. Water filter is not necessary when using carboy connection.

1. Connect the faucet adaptor to the water mains

valve.

2. Determine the location to fix the external filter.

Fix the filter’s connecting apparatus (5) on the wall.

3. Attach the filter in upright position on the filter

connecting apparatus, as indicated on the label. (6)

After the connection is established, it should look like the figure below.

Refrigerator / User Guide

13 / 38 EN

Installation

3.9.2.Internal filter

The internal filter provided with the product is not installed upon delivery; please follow the instructions below to install the filter.

Water line:

1. “Ice Off” indicator must be active while

installing the filter. Switch the ON-OFF indicator using the “Ice” button on the screen.

2. Remove the vegetable bin (a) to access the

water filter.

Carboy line:

Do not use the first 10 glasses of water after connecting the filter.

14 / 38 EN

Refrigerator / User Guide

Installation

3. Remove the water filter by-pass cover by

pulling.

A few drops of water may flow out after removing the cover; this is

4. Place the water filter cover into the

mechanism and push to lock in place.

normal.

5. Push the “Ice” button on the screen again to

cancel the “Ice Off” mode.

The water filter will clear certain foreign particles in the water. It will not clear the

C C

Refrigerator / User Guide

microorganisms in the water.

See section 5.2 for activating the filter replacing period.

15 / 38 EN

4 Preparation

4.1. What to do for energy saving

mehmet

Connecting the product to electronic energy-saving systems is harmful, as it

• Do not keep the refrigerator doors open for

• Do not place hot food or beverages into the

• Do not overfill the refrigerator; blocking the

• The energy consumption value specified for

• Depending on the product’s features;

• The baskets/drawers that are provided with the

• Food contact with the temperature sensor in

may damage the product.

long periods.

refrigerator.

internal air flow will reduce cooling capacity.

the refrigerator was measured with the freezer compartment’s upper shelf removed, other shelves and the lowest drawers in place and under maximum load. The top glass shelf can be used, depending on the shape and size of food to be frozen.

defrosting frozen foods in the cooler compartment will ensure energy saving and preserve food quality.

chill compartment must always be in use for low energy consumption and for better storage conditions.

the freezer compartment may increase energy consumption of the appliance. Thus any contact with the sensor(s) must be avoided.

• Make sure the foods are not in contact with the cooler compartment temperature sensor described below.

4.2. First Use

Before using your refrigerator, make sure the necessary preparations are made in line with the instructions in “Safety and environment instructions” and “Installation” sections.

• Keep the product running with no food inside for 6 hours and do not open the door, unless absolutely necessary.

A sound will be heard when the compressor is engaged. It is normal to

C C

hear sound even when the compressor is inactive, due to the compressed liquids and gasses in the cooling system.

It is normal for the front edges of the refrigerator to be warm. These areas are designed to warm up in order to prevent condensation.

In some models, the indicator panel automatically turns off 5 minutes after the door has closed. It will be reactivated when the door has opened or pressed on any key.

16 / 38 EN

Refrigerator / User Guide

5 Using the product

5.1. Indicator panel

Indicator panels may vary depending on the model of your product. Audial and visual functions of the indicator panel will assist in using the refrigerator.

7 6

Cooler compartment indicator

Error status indicator

Temperature indicator

Vacation function button

Temperature adjustment button

Compartment selection button

Freezer Compartment indicator

Economy mode indicator

Vacation function indicator

*optional

*Optional: The figures in this user guide are intended as drafts and may not perfectly match your

product. If your product does not comprise the relevant parts, the information pertains to other models.

Refrigerator / User Guide

17 / 38 EN

Using the product

7.1

7.2

8910

1. Cooler compartment indicator

The cooler compartment light will turn on when adjusting the cooler compartment temperature.

2. Error status indicator

This sensor will activate if the refrigerator is not cooling adequately or in case of sensor fault. When this indicator is active, the freezer compartment temperature indicator will display "E" and the cooler compartment temperature indicator will display "1, 2, 3..." etc. numbers. The numbers on the indicator serve to inform the service personnel about the fault.

3. Temperature indicator

Indicates the temperature of the freezer and cooler compartments.

4.Vacation function button

To activate this function, press and hold the Vacation button for 3 seconds. When the Vacation function is active, the cooler compartment temperature indicator displays the inscription "- -" and no cooling process will be active in the cooling compartment. This function is not suitable to keep food in the cooler compartment. Other compartments will remain cooled with the respective temperature set for each compartment.

Push the Vacation button ( ) again to cancel this function.

5. Temperature adjustment button

Respective compartment's temperature varies in

-24°C..... -18°C and 8°C...1°C ranges.

6. Compartment selection button

Use the refrigerator compartment selection button to toggle between the cooler and freezer compartments.

7. Freezer Compartment indicator

The freezer compartment light will turn on when adjusting the cooler compartment temperature.

8. Economy mode indicator

Indicates the refrigerator is running on energysaving mode. This indicator will be active when the temperature in the freezer compartment is set to -18°C.

9.Vacation function indicator

Indicates the vacation function is active.

18 / 38 EN

Refrigerator / User Guide

Using the product

7.2

7.1

8910

1. Economic use 2- High temperature / fault alert

3. Energy saving function (display off) 4- Rapid cooling 5- Vacation function 6- Cooler compartment temperature setting

7. Energy saving (display off) /Alarm off 8- Keypad lock 9- Eco-fuzzy 10- Freezer compartment temperature setting 11- Rapid freezing

*Optional: The figures in this user guide are intended as drafts and may not perfectly match your product. If your product does not comprise the relevant parts, the information pertains

Refrigerator / User Guide

to other models.

19 / 38 EN

Using the product

1. Economic use

This sign will light up when the freezer compartment is set to -18°C', the most economical setting. ( ) Economic use indicator will turn off when rapid cooling or rapid freezing function is selected.

2. Power failure/High temperature / error warning indicator

This indicator ( ) will light up in case of temperature faults or fault alerts. If you see this indicator is lit up, please see the "recommended solutions for problems" section in this guide.

This indicator illuminates during power failure, high temperature failures and error warnings. During sustained power failures, the highest temperature that the freezer compartment reaches will flash on the digital display. After checking the food located in the freezer compartment press the alarm off button to clear the warning.

Please refer to “remedies advised for troubleshooting” section on your manual if you observe that this indicator is illuminated.

3. Energy saving function (display off)

If the product doors are kept closed for a long time energy saving function is automatically activated and energy saving symbol is illuminated. When energy saving function is activated, all symbols on the display other than energy saving symbol will turn off. When the Energy Saving function is activated, if any button is pressed or the door is opened, energy saving function will be cancelled and the symbols on display will return to normal.

Energy saving function is activated during delivery from factory and cannot be cancelled.

4. Rapid cooling

When the rapid cooling function is turned on, the rapid cool indicator will light up ( ) and the cooler compartment temperature indicator will display the value 1. Push the Rapid cool button again to cancel this function. The Rapid cool indicator will turn off and return to normal setting. The rapid cooling function will be automatically cancelled after 1 hour, unless cancelled by the user. Too

cool a large amount of fresh food, press the rapid cool button before placing the food in the cooler compartment.

5. Vacation function

To activate the Vacation function, , press the quick fridge button for 3 seconds; this will activate the vacation mode indicator ( ). When the Vacation function is active, the cooler compartment temperature indicator displays the inscription "- -" and no cooling process will be active in the cooling compartment. This function is not suitable to keep food in the cooler compartment. Other compartments will remain cooled with the respective temperature set for each compartment. Push the vacation function button again to cancel this function.

6. Cooler compartment temperature setting

After pressing the button , the cooler compartment temperature can be set to 8,7,6,5,4,3,2 and 1 respectively.( )

7. 1 Energy saving (display off)

Pressing this button ( ) will light up the energysaving sign ( ) and the Energy-saving function will activate. Activating the energy-saving function will turn off all other signs on the display. When the energy-saving function is active, pressing any button or opening the door will deactivate the energy-saving function and the display signals will return to normal. Pressing this button ( ) again will turn off the energy-saving sign and deactivate the energy-saving function.

7.2 Alarm off

In case of power failure/high temperature alarm, after checking the food located in the freezer compartment press the alarm off button to clear the warning.

8. Keypad lock

Press the display off button, simultaneously for 3 seconds. The keypad lock sign will light up and the keypad lock will be activated; the buttons will be inactive when the Keypad lock is activated. Press the Display off button again simultaneously for 3 seconds. The keypad lock sign will turn off and

20 / 38 EN

Refrigerator / User Guide

Using the product

the keypad lock mode will be disengaged. Press the Display off button to prevent changingthe refrigerator’s tempeture settings.

9. Eco-fuzzy

To activate the eco-fuzzy function, press and hold the eco-fuzzy button for 1 second. When this function is active, the freezer will switch to the economic mode after at least 6 hours and the economic use indicator will light up. To deactivate

the ( ) eco-fuzzy function, press and hold the eco-fuzzy function button for 3 seconds.

The indicator will light up after 6 hours when the eco-fuzzy function is active.

10. Freezer compartment temperature setting

The temperature in the freezer compartment is adjustable. Pressing the button will enable the freezer compartment temperature to be set at

-18,-19, -20, -21, -22, -23 and -24.

11. Rapid freezing

For rapid freezing, press the button ; this will activate the rapid freezing indicator ( ).

When the rapid freezing function is turned on, the rapid freeze indicator will light up and the freezer compartment temperature indicator will display the value -27. Press the Rapid freeze button ( ) again to cancel this function. The Rapid freeze indicator will turn off and return to normal setting. The rapid freezing function will be automatically cancelled after 24 hours, unless cancelled by the user. To freeze a large amount of fresh food, press the rapid freeze button before placing the food in the freezer compartment.

Refrigerator / User Guide

21 / 38 EN

Using the product

7.1

7.2

8910

1 2

(*)

13 12

11.2

1. Freezer compartment temperature setting

2. Economy mode

3. Energy saving function (display off)

4. Power failure/High temperature / error

warning indicator

5. Cooler compartment temperature setting

6. Rapid cooling

7. Vacation function

8. Keypad lock / filter replacing alert cancellation

9. Water, fragmented ice, ice cubes selection

10. Ice making on/off

11. Display on/off/Alarm off

12. Autoeco

13. Rapid freezing

1011.1

*Optional: The figures in this user guide are intended as drafts and may not perfectly match your product. If your product does not comprise the relevant parts, the information pertains to other models.

22 / 38 EN

Refrigerator / User Guide

Using the product

1. Freezer compartment temperature setting

Pressing the button ( ) will enable the freezer compartment temperature to be set at -18,-19,20,-21 ,-22,-23,-24,-18...

2. Economy mode

Indicates the refrigerator is running on energysaving mode. This indicator will be active when the freezer compartment temperature is set at -18 or the energy-saving cooling is engaged by eco-extra function. ( )

3.Energy saving function (display off)

Energy saving function is activated during delivery from factory and cannot be cancelled.

4. Power failure/High temperature / error warning indicator

This indicator ( ) will light up in case of temperature faults or fault alerts. If you see this indicator is lit up, please see the "recommended solutions for problems" section in this guide.

Please refer to "remedies advised for troubleshooting" section on your manual if you observe that this indicator is illuminated.

5. Cooler compartment temperature setting

After pressing the button ( ), the cooler compartment temperature can be set to 8,7,6,5,4,3,2.. respectively.

6. Rapid cooling

Refrigerator / User Guide

23 / 38 EN

For rapid cooling , press the button; this will activate the rapid cooling indicator ( ). Press this button again to deactivate this function. Use this function when placing fresh foods into

the cooler compartment or to rapidly cool the food items. When this function is activated, the refrigerator will be engaged for 1 hour.

7. Vacation function

When the Vacation function ( ) is active, the cooler compartment temperature indicator displays the inscription "- -" and no cooling process will be active in the cooling compartment. This function is not suitable to keep food in the cooler compartment. Other compartments will remain cooled with the respective temperature set for each compartment.

Press the vacation function button again to cancel this function. ( )

8. Keypad lock / Keypad lock / filter replacing

alert cancellation

Press keypad lock button ( ) to activate the keypad lock. You may also use this function to prevent changing the refrigerator's temperature settings. The refrigerator's filter must be replaced every 6 months. If you follow the instructions in the section 5.2, the refrigerator will automatically calculate the remaining period and the filter replacing alert indicator ( ) will light up when filter expires.

Press and hold the button ( ) for 3 seconds to turn off the filter alert light.

9. Water, fragmented ice, ice cubes selection

Navigate the water ( ), ice cube ( ) and fragmented ice ( ) selections using the button number 8. The active indicator will remain lit.

10. Ice making on/off

Press the button ( ) to cancel ( ) or activate ( ) ice-making.

11.1 Display on/off

When you press the Display off button and when the (

) function is lit, all the other icons of the display will go off and the display will enter the energy saving mode. When you press the Display off button

+ 56 hidden pages