Beko GN163120B User Manual

Refrigerator

User Manual

Frigorifero

Manuale utente

Gefrierschrank

Bedienungsanleitung

GN163120B

GN163130PTN

DummySmeg_V1SBS

EN/İT/DE

57 6248 0000/AK -EN-İT-DE

Please read this manual before using the product!

Dear Customer,

We'd like you to make the best use of our product, which has been manufactured in modern facilities with care and meticulous quality controls.

Thus, we advice you to read the entire user manual before you use the product. In case the product changes hands, do not forget to hand the guide to its new owner along with the product.

This guide will help you use the product quickly and safely.

t Please read the user guide carefully before installing and operating the product. t Always observe the applicable safety instructions.

t Keep the user guide within easy reach for future use.

t Please read any other documents provided with the product.

Keep in mind that this user guide may apply to several product models. The guide clearly indicates any variations of different models.

C	Important		information	and useful
	tips.
A	Risk of life and property.
B	Risk of electric shock.
	The	product’s packaging is
	made	of	recyclable	materials,
	in accordance with the National
	Environment Legislation.

C INFORMATION		.The model information as stored in the product data	base
		can be reached by entering following website and searching
		for your model identifier (*) found on energy label.
SUPPLIER’S NAME	MODEL IDENTIFIER	(*)
A	A	https://eprel.ec.europa.eu/

Table of Contents

1. Safety and environment instructions 3

1.1. General safety. . . . . . . . . . . . . . . . . . . . . . . 3 1.1.1 HC warning . . . . . . . . . . . . . . . . . . . . . . . . 4 1.1.2 For models with water dispenser . . . . . . . . 4 1.2. Intended use . . . . . . . . . . . . . . . . . . . . . . . . 5 1.3. Child safety. . . . . . . . . . . . . . . . . . . . . . . . . 5

1.4. Compliance with WEEE Directive and Disposing of the Waste Product . . . . . . . . . 5

1.5. Compliance with RoHS Directive . . . . . . . . . 5 1.6. Package information . . . . . . . . . . . . . . . . . . 5

2	Refrigerator	6
2	Refrigerator	7
3	Installation	8

3.1. Right place for installation . . . . . . . . . . . . . . 8 3.2. Attaching the plastic wedges . . . . . . . . . . . . 8 3.3. Adjusting the stands . . . . . . . . . . . . . . . . . . 9 3.4. Power connection . . . . . . . . . . . . . . . . . . . . 9 3.5. Water connection . . . . . . . . . . . . . . . . . . . 10 3.6. Connecting water hose to the product . . . . 11 3.7. Connecting to water mains . . . . . . . . . . . . 11 3.8. For products using water carboy . . . . . . . . 12 3.9 Water filter . . . . . . . . . . . . . . . . . . . . . . . . . 12 3.9.1.Fixing external filter on the wall (Optional) 13 3.9.2.Internal filter . . . . . . . . . . . . . . . . . . . . . . 14

4 Preparation

16

4.1. What to do for energy saving . . . . . . . . . . . 16 4.2. First Use . . . . . . . . . . . . . . . . . . . . . . . . . . 16

5 Using the product

17

5.1. Indicator panel . . . . . . . . . . . . . . . . . . . . . 17 5.2. Humidity controlled crisper . . . . . . . . . . . . 24 5.3. Activating water filter change warning . . . . 25 5.4. Using the water fountain . . . . . . . . . . . . . . 27 5.5. Filling the fountain water tank . . . . . . . . . . 27 5.6. Cleaning the water tank. . . . . . . . . . . . . . . 28 5.7. Taking ice / water . . . . . . . . . . . . . . . . . . . 29 5.8. Drip tray . . . . . . . . . . . . . . . . . . . . . . . . . 29 5.9. Zero degree compartment . . . . . . . . . . . . . 30 5.10. Vegetable bin . . . . . . . . . . . . . . . . . . . . . 30 5.11. Blue light . . . . . . . . . . . . . . . . . . . . . . . . 30 5.12. Ionizer . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5.13. Minibar . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5.14. Odour filter . . . . . . . . . . . . . . . . . . . . . . . 30 5.15. Icematic and ice storage box . . . . . . . . . . 31 5.16. Ice-maker . . . . . . . . . . . . . . . . . . . . . . . . 31 5.17. Freezing fresh food . . . . . . . . . . . . . . . . . 33 5.18. Recommendations for storing frozen foods 33 5.19. Deep freezer details . . . . . . . . . . . . . . . . . 33 5.20. Placing the food . . . . . . . . . . . . . . . . . . . . 34 5.21. Door open alert . . . . . . . . . . . . . . . . . . . . 34 5.22. Interior light . . . . . . . . . . . . . . . . . . . . . . . 34

6 Maintenance and Cleaning

35

6.1. Preventing Bad Odour . . . . . . . . . . . . . . . . 35

6.2. Protecting Plastic Surfaces . . . . . . . . . . . . 35

7. Troubleshooting	36

	2 / 37 EN	Refrigerator / User Guide

1.Safety and environment instructions

	This section provides the safety					mental disabilities, without sufficient
	instructions necessary to prevent the risk					knowledge and experience or by
	of injury and material damage. Failure to					children. The device can only be used
	observe these instructions will invalidate					by such persons under supervision
	all types of product warranty.					and instruction of a person responsible
	Intended use					for their safety. Children should not be
						allowed to play with this device.
		WARNING:
			t			In case of malfunction, unplug the
		Keep ventilation openings, in
	A					device.
		the appliance enclosure or in
			t			After unplugging, wait at least 5 minutes
		the built-instructure, clear of
						before plugging in again.
		obstruction.
			t			Unplug the product when not in use.
		WARNING:
			t			Do not touch the plug with wet hands!
		Do not use mechanical
						Do not pull the cable to plug off, always
		devices or other means to
	A					hold the plug.
		accelerate the defrosting
			t			Do not plug in the refrigerator if the
		process, other than those
						socket is loose.
		recommended by the
			t			Unplug the product during installation,
		manufacturer.
						maintenance, cleaning and repair.
		WARNING:
	A		t			If the product will not be used for a
		Do not damage the refrigerant				while, unplug the product and remove
		circuit.				any food inside.
		WARNING:	t			Do not use the product when the
		Do not use electrical				compartment with circuit cards located
	A	appliances inside the food				on the upper back part of the product
		storage compartments of the				(electrical card box cover) (1) is open.
		appliance, unless they are of
		the type recommended by the				1
		manufacturer.

	This appliance is intended to be used in
	household and similar applications such
	as
	– staff kitchen areas in shops, offices and		1
	other working environments;
	– farm houses and by clients in hotels,
	motels and other residential type
	environments;	t	Do not use steam or steamed cleaning
	– bed and breakfast type environments;		materials for cleaning the refrigerator
	– catering and similar non-retail		and melting the ice inside. Steam may
	applications.		contact the electrified areas and cause
	1.1. General safety	t	short circuit or electric shock!
	t This product should not be used by		Do not wash the product by spraying or
			pouring water on it! Danger of electric
	persons with physical, sensory and
		3 / 37 ENshock!
	Refrigerator / User Guide

Safety and environment instructions

t In case of malfunction, do not use the product, as it may cause electric shock. Contact the authorised service before doing anything.

t Plug the product into an earthed socket. Earthing must be done by a qualified electrician.

t If the product has LED type lighting, contact the authorised service for replacing or in case of any problem.

t Do not touch frozen food with wet hands! It may adhere to your hands!

t Do not place liquids in bottles and cans into the freezer compartment. They may explode.

t Place liquids in upright position after tightly closing the lid.

t Do not spray flammable substances near the product, as it may burn or explode.

t Do not keep flammable materials and products with flammable gas (sprays, etc.) in the refrigerator.

t Do not place containers holding liquids on top of the product. Splashing water on an electrified part may cause electric shock and risk of fire.

t Exposing the product to rain, snow, sunlight and wind will cause electrical danger. When relocating the product, do not pull by holding the door handle. The handle may come off.

t Take care to avoid trapping any part of your hands or body in any of the moving parts inside the product.

t Do not step or lean on the door, drawers and similar parts of the refrigerator. This will cause the product to fall down and cause damage to the parts.

t Take care not to trap the power cable.

1.1.1 HC warning

If the product comprises a cooling system using R600a gas, take care to avoid damaging the cooling system and its pipe while using and moving the product. This gas is flammable. If the cooling system

is damaged, keep the product away from sources of fire and ventilate the room immediately.

The label on the inner left side C indicates the type of gas used in

the product.

1.1.2 For models with water dispenser

t Pressure for cold water inlet shall be maximum 90 psi (6.2 bar). If your water pressure exceeds 80 psi (5.5 bar), use a pressure limiting valve in your mains system. If you do not know how to check your water pressure, ask for the help of a professional plumber.

t If there is risk of water hammer effect in your installation, always use a water hammer prevention equipment in

your installation. Consult Professional plumbers if you are not sure that there is no water hammer effect in your installation.

t Do not install on the hot water inlet. Take precautions against of the

risk of freezing of the hoses. Water temperature operating interval shall be 33°F (0.6°C) minimum and 100°F (38°C) maximum.

t Use drinking water only.

	4 / 37 EN	Refrigerator / User Guide

t

t

t

t

t

Safety and environment instructions

1.2. Intended use

This product is designed for home use. It is not intended for commercial use. The product should be used to store food and beverages only.

Do not keep sensitive products requiring controlled temperatures (vaccines, heat sensitive medication, medical supplies, etc.) in the refrigerator.

The manufacturer assumes no responsibility for any damage due to misuse or mishandling.

Original spare parts will be provided for 10 years, following the product purchasing date.

1.3. Child safety

t Keep packaging materials out of children’s reach.

t Do not allow the children to play with the product.

t If the product’s door comprises a lock, keep the key out of children’s reach.

1.4. Compliance with WEEE Directive

and Disposing of the Waste Product

This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).

This product has been manufactured

with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the

waste product with normal domestic and other wastes at the end of its service life. Take it to the collection

center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.

1.6. Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

1.5. Compliance with RoHS Directive t This product complies with EU WEEE Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

Refrigerator / User Guide	5 / 37 EN

2 Refrigerator

1

*18

*17

*16

*16

15

14

13

2
3	*4
5	*6
	*7
*9
10
*11	*8
12
	13

Freezer compartmentCooler compartment

Fan

Butter-cheese compartmentGlass shelves

Cooler compartment door shelvesMinibar accessory

Water tankBottle shelf

Odour filter

Zero degree compartmentVegetable binsAdjustable stands

Frozen food storing compartmentsFreezer compartment door shelvesIcematics

Ice storage boxIce-maker decorative lid

*Optional

		*Optional: Figures in this user guide are schematic and may not be exactly match your product. If your
	C	product does not comprise the relevant parts, the information pertains to other models.

6 / 37 EN

Refrigerator / User Guide

2 Refrigerator

1	2
	3	*4
13		*6
*14	5
*14
		8
	9	*7
12	10
11		11

	*Optional: Figures in this user guide are schematic and may not be exactly match your product. If your
C	product does not comprise the relevant parts, the information pertains to other models.

Refrigerator / User Guide	7 / 37 EN

3 Installation

3.1. Right place for installation

Contact the Authorized Service for the product's installation. To ready the product for installation, see the information in the user guide and make sure the electric and water utilities are as required. If not, call an electrician and plumber to arrange the utilities as necessary.

8"3/*/( The manufacturer

Bassumes no responsibility for any damage caused by the work carried out by unauthorized persons.

8"3/*/( The product’s power

Bcable must be unplugged during installation. Failure to do so may result in death or serious injuries! 8"3/*/( : If the door span is too

narrow for the product to pass, remove

Athe door and turn the product sideways; if this does not work, contact the authorized service.

t 1MBDF UIF QSPEVDU PO B GMBU TVSGBDF UP BWPJE vibration.

t 1MBDF UIF QSPEVDU BU MFBTU DN BXBZ GSPN UIF heater, stove and similar sources of heat and at least 5 cm away from electric ovens.

t %P OPU FYQPTF UIF QSPEVDU UP EJSFDU TVOMJHIU PS keep in damp environments.

t 5IF QSPEVDU SFRVJSFT BEFRVBUF BJS DJSDVMBUJPO UP function efficiently. If the product will be placed in an alcove, remember to leave at least 5 cm distance between the product and the ceiling and the walls.

t %P OPU JOTUBMM UIF QSPEVDU JO FOWJSPONFOUT XJUI temperatures below -5°C.

3.2. Attaching the plastic wedges

Use the plastic wedges in the provided with the product to provide sufficient space for air circulation between the product and the wall.

To attach the wedges, remove the screws on the product and use the screws provided with the wedges.

Attach 2 plastic wedges on the ventilation cover shown as j in the figure.

	8 / 37 EN	Refrigerator / User Guide

Installation

3.3. Adjusting the stands

If the product is not in balanced position, adjust the front adjustable stands by rotating right or left.

adjusting nut

fixing nut

fixing nut

In order to adjust the doors vertically, t-PPTFO UIF GJYJOH OVU BU UIF CPUUPN t4DSFX BEKVTUJOH OVU $8 $$8 BDDPSEJOH UP UIF

position of the door t5JHIUFO UIF GJYJOH OVU GPS UIF GJOBM QPTJUJPO

In order to adjust the doors horizontally, t Loosen the fixing bolt on the top

t Screw the adjusting bolt (CW/CCW) on the side according to the position of the door

t Tighten the fixing bolt on the top for the final position

3.4. Power connection

A8"3/*/( Do not use extension or multi sockets in power connection.

B8"3/*/( Damaged power cable must be replaced by Authorized Service.

When placing two coolers in adjacent

Cposition, leave at least 4 cm distance between the two units.

t Our firm will not assume responsibility for any damages due to usage without earthing and power connection in compliance with national regulations.

t The power cable plug must be easily accessible after installation.

t Connect the refrigerator to an earthed socket with 220-240V/50 Hz voltage. The plug must comprise a 10-16A fuse.

t Do not use multi-group plug with or without extension cable between the wall socket and the refrigerator.

Refrigerator / User Guide	9 / 37 EN

Installation

3.5. Water connection

(Optional)

WARNING: Unplug the product

Aand the water pump (if available) during connection.

The product’s water mains, filter and carboy connections must be rendered by authorizer service. The product can be connected to a carboy or directly to the water mains, depending on the model. To establish the connection, the water hose must first be connected to the product.

Check to see the following parts are supplied with your product’s model:

1	2
3	4	*5

Connector (1 piece): Used to attach the water hose to the rear of the product.

Hose clip (3 pieces): Used to fix the water hose on the wall.

Water hose (1 piece, 5 meter diameter 1/4 inches): Used for the water connection.

Faucet adapter (1 piece): Comprises a porous filter, used for connection to the cold water mains.

Water filter (1 piece *Optional): Used to connect the mains water to the product. Water filter is not required if carboy connection is available.

	10 / 37 EN	Refrigerator / User Guide

Installation

3.6. Connecting water hose to the product

To connect the water hose to the product, follow the instructions below.

Remove the connector on the hose nozzle adaptor in the back of the product and run the hose through the connector.

3.7. Connecting to water mains

(Optional)

To use the product by connecting to the cold water mains, a standard 1/2” valve connector must be installed to the cold water mains in your home. If the connector is not available or if you are unsure, consult a qualified plumber.

Detach the connector (1) from the faucet adaptor (2).

Push the water hose down tightly and connect	3 3	2 2	1
to the hose nozzle adaptor.			1

Tighten the connector manually to fix on the hose nozzle adaptor. You may also tighten the connector using a pipe wrench or pliers.

Connect the faucet adaptor to the water mains valve.

Attach the connector around the water hose.

Connect the other end of the hose to the water mains (See Section 3.7) or, to use carboy, to the water pump (See Section 3.8).

Refrigerator / User Guide	11 / 37 EN

Installation

Attach the connector into the faucet adaptor and tighten by hand / tool.

To avoid damaging, shifting or accidentally disconnecting the hose, use the clips provided to fix the water hose appropriately.

A8"3/*/(After turning the faucet on, make sure there is no water leak on either end of the water hose. In case of leakage, turn the valve off and tighten all connections using a pipe wrench or pliers.

3.8.For products using water carboy

(Optional)

To use a carboy for the product’s water connection, the water pump recommended by the authorized service must be used.

Connect one end of the water hose provided with the pump to the product (see 3.6) and follow the instructions below.

Connect the other end of the water hose to the water pump by pushing the hose into the pump’s hose inlet.

Place and fasten the pump hose inside the carboy.

Once the connection is established, plug in and start the water pump.

CPlease wait 2-3 minutes after starting the pump to achieve the desired efficiency.

CSee also the pump’s user guide for water connection.

CWhen using carboy, water filter is not required.

3.9Water filter

(Optional)

The product may have internal or external filter, depending on the model. To attach the water filter, follow the instructions below.

	12 / 37 EN	Refrigerator / User Guide

Installation

3.9.1.Fixing external filter on the wall (Optional)

A WARNING:product. Do not fix the filter on the

Check to see the following parts are supplied with your product’s model:

5

4

6

1 2 3

Connector (1 piece): Used to attach the water hose to the rear of the product.

Faucet adapter (1 piece): Used for connection to the cold water mains.

Porous filter (1 piece)

Hose clip (3 pieces): Used to fix the water hose on the wall.

Filter connecting apparatus (2 pieces): Used to fix the filter on the wall.

Water filter (1 piece): Used to connect the product to the water mains. Water filter is not necessary when using carboy connection.

Connect the faucet adaptor to the water mains valve.

Determine the location to fix the external filter. Fix the filter’s connecting apparatus (5) on the wall.

Attach the filter in upright position on the filter connecting apparatus, as indicated on the label. (6)

Attach the water hose extending from the top of the filter to the product’s water connection adaptor, (see 3.6.)

After the connection is established, it should look like the figure below.

Refrigerator / User Guide	13 / 37 EN

Installation

3.9.2.Internal filter	“Ice Off” indicator must be active while
The internal filter provided with the product is not	installing the filter. Switch the ON-OFF
installed upon delivery; please follow the instructions	indicator using the “Ice” button on the screen.
below to install the filter.

Water line:

Carboy line:

Remove the vegetable bin (a) to access the water filter.

a

CDo not use the first 10 glasses of water after connecting the filter.

	14 / 37 EN	Refrigerator / User Guide

Installation

Remove the water filter by-pass cover by pulling.

CA few drops of water may flow out after removing the cover; this is normal.

Place the water filter cover into the mechanism and push to lock in place.

Push the “Ice” button on the screen again to cancel the “Ice Off” mode.

C	The water filter will clear certain foreign
	particles in the water. It will not clear the
	microorganisms in the water.
C	See section 5.2 for activating the filter
	replacing period.

Refrigerator / User Guide	15 / 37 EN

4 Preparation

4.1. What to do for energy saving

Connecting the product to electronic

Aenergy-saving systems is harmful, as it may damage the product.

t For a freestanding appliance; ‘this refrigerating appliance is .

t Do not keep the refrigerator doors open for long periods.

t Do not place hot food or beverages into the refrigerator.

t Do not overfill the refrigerator; blocking the internal air flow will reduce cooling capacity.

t The energy consumption value specified for the refrigerator was measured with the freezer compartment’s upper shelf removed, other shelves and the lowest drawers in place and under maximum load. The top glass shelf can be used, depending on the shape and size of food to be frozen.

t Depending on the product’s features; defrosting frozen foods in the cooler compartment will ensure energy saving and preserve food quality.

t Since hot and humid air will not directly penetrate into your product when the doors are not opened, your product will optimize itself in conditions sufficient to protect your food. Functions and components such as compressor, fan, heater, defrost, lighting, display and so on will operate according to the needs to consume minimum energy under these circumstances.

t The baskets/drawers that are provided with the chill compartment must always be in use for low energy consumption and for better storage conditions.

t Food contact with the temperature sensor in the freezer compartment may increase energy consumption of the appliance. Thus any contact with the sensor(s) must be avoided.

t Make sure the foods are not in contact with the cooler compartment temperature sensor described below.

4.2. First Use

Before using your refrigerator, make sure the necessary preparations are made in line with the instructions in “Safety and environment instructions” and “Installation” sections.

t Keep the product running with no food inside for 6 hours and do not open the door, unless absolutely necessary.

CA sound will be heard when the compressor is engaged. It is normal to hear sound even when the compressor is inactive, due to the compressed liquids and gasses in the cooling system.

CIt is normal for the front edges of the refrigerator to be warm. These areas are designed to warm up in order to prevent condensation.

CIn some models, the indicator panel automatically turns off 5 minutes after the door has closed. It will be reactivated when the door has opened or pressed on any key.

16 / 37 EN

Refrigerator / User Guide

5 Using the product

5.1. Indicator panel

Indicator panels may vary depending on the model of your product.

Audial and visual functions of the indicator panel will assist in using the refrigerator.

8									1						2										3

9

7

6

5

4

	Cooler compartment indicator
	Error status indicator
	Temperature indicator
	Vacation function button
	Temperature adjustment button
	Compartment selection button
	Freezer Compartment indicator
	Economy mode indicator
	Vacation function indicator
	*optional
C	*Optional: The figures in this user guide are intended as drafts and may not perfectly match your
	product. If your product does not comprise the relevant parts, the information pertains to other models.

Refrigerator / User Guide	17 / 37 EN

Using the product

1. Cooler compartment indicator

The cooler compartment light will turn on when adjusting the cooler compartment temperature.

2. Error status indicator

This sensor will activate if the refrigerator is not cooling adequately or in case of sensor fault. When this indicator is active, the freezer compartment temperature indicator will display "E" and the cooler compartment temperature indicator will display "1, 2, 3..." etc. numbers. The numbers on the indicator serve to inform the service personnel about the fault.

3. Temperature indicator

Indicates the temperature of the freezer and cooler compartments.

4.Vacation function button

To activate	this function, press and hold the
Vacation button for 3 seconds. When the Vacation
function is	active, the cooler compartment

temperature	indicator	displays	the	inscription
"- -" and no	cooling	process	will be	active in

the cooling compartment. This function is not suitable to keep food in the cooler compartment. Other compartments will remain cooled with the respective temperature set for each compartment.

Push the Vacation button (	) again to cancel
this function.

5. Temperature adjustment button

Respective compartment's temperature varies in -24°C..... -18°C and 8°C...1°C ranges.

6. Compartment selection button

Use the refrigerator compartment selection button to toggle between the cooler and freezer compartments.

7. Freezer Compartment indicator

The freezer compartment light will turn on when adjusting the cooler compartment temperature.

8. Economy mode indicator

Indicates the refrigerator is running on energysaving mode. This indicator will be active when the temperature in the freezer compartment is set to -18°C.

9.Vacation function indicator

Indicates the vacation function is active.

	18 / 37 EN	Refrigerator / User Guide

Using the product

*1 2 3

11

4

10

9

8 7.1

7.2 6

5

Economic use

High temperature / fault alert

Energy saving function (display off)Rapid cooling

Vacation function

Cooler compartment temperature settingEnergy saving (display off) /Alarm offKeypad lock

Eco-fuzzy

Freezer compartment temperature settingRapid freezing

*Optional: The figures in this user guide are intended as drafts and may not perfectly match C your product. If your product does not comprise the relevant parts, the information pertains

to other models.

Refrigerator / User Guide	19 / 37 EN

Using the product

1. Economic use

This sign will light up when the freezer compartment is set to -18°C', the most economical setting. ( ) Economic use indicator will turn off when rapid cooling or rapid freezing function is selected.

2. Power failure/High temperature / error warning indicator

This indicator ( ) will light up in case of temperature faults or fault alerts. If you see this indicator is lit up, please see the "recommended solutions for problems" section in this guide.

This indicator illuminates during power failure, high temperature failures and error warnings. During sustained power failures, the highest temperature that the freezer compartment reaches will flash on the digital display. After checking the food located in the freezer compartment press the alarm off button to clear the warning.

Please refer to “remedies advised for troubleshooting” section on your manual if you observe that this indicator is illuminated.

3. Energy saving function (display off)

If the product doors are kept closed for a long time energy saving function is automatically activated and energy saving symbol is illuminated. When energy saving function is activated, all symbols on the display other than energy saving symbol will turn off. When the Energy Saving function is activated, if any button is pressed or the door is opened, energy saving function will be cancelled and the symbols on display will return to normal.

Energy saving function is activated during delivery from factory and cannot be cancelled.

4. Rapid cooling

When the rapid cooling function is turned on, the rapid cool indicator will light up ( ) and the cooler compartment temperature indicator will display the value 1. Push the Rapid cool button again to cancel this function. The Rapid cool indicator will turn off and return to normal setting. The rapid cooling function will be automatically cancelled after 1 hour, unless cancelled by the user. Too cool a large amount of fresh food, press the rapid cool button

before placing the food in the cooler compartment.

5. Vacation function

To activate the Vacation function, , press the quick

fridge button for 3 seconds;	this will activate the
vacation mode indicator (	). When the Vacation

function is active, the cooler compartment

temperature	indicator	displays	the	inscription
"- -" and no	cooling	process	will be	active in

the cooling compartment. This function is not suitable to keep food in the cooler compartment. Other compartments will remain cooled with the respective temperature set for each compartment. Push the vacation function button again to cancel this function.

6. Cooler compartment temperature setting

After pressing the button , the cooler compartment

temperature can be set to			8,7,6,5,4,3,2 and 1
respectively.(	)
7. 1 Energy saving (display off)
Pressing this button (		) will light up the energy-
saving sign (	) and	the	Energy-saving function

will activate. Activating the energy-saving function will turn off all other signs on the display. When the energy-saving function is active, pressing any button or opening the door will deactivate the energy-saving function and the display signals will return to normal. Pressing this button ( ) again will turn off the energy-saving sign and deactivate the energy-saving function.

7.2 Alarm off

In case of power failure/high temperature alarm, after checking the food located in the freezer compartment press the alarm off button to clear the warning.

	20 / 37 EN	Refrigerator / User Guide

Using the product

8. Keypad lock

Press the display off button, simultaneously for 3 seconds. The keypad lock sign will light up and the keypad lock will be activated; the buttons will be inactive when the Keypad lock is activated. Press the Display off button again simultaneously for 3 seconds. The keypad lock sign will turn off and

the keypad lock mode will be disengaged. Press the Display off button to prevent changingthe refrigerator’s tempeture settings.

9. Eco-fuzzy

To activate the eco-fuzzy function, press and hold the eco-fuzzy button for 1 second. When this function is active, the freezer will switch to the economic mode after at least 6 hours and the economic use indicator will light up. To deactivate

the ( ) eco-fuzzy function, press and hold the ecofuzzy function button for 3 seconds.

The indicator will light up after 6 hours when the eco-fuzzy function is active.

10. Freezer compartment temperature setting

The temperature in the freezer compartment is adjustable. Pressing the button will enable the freezer compartment temperature to be set at -18,- 19, -20, -21, -22, -23 and -24.

11. Rapid freezing

For rapid freezing, press the button ; this will activate the rapid freezing indicator ( ).

When the rapid freezing function is turned on, the rapid freeze indicator will light up and the freezer compartment temperature indicator will display the value -27. Press the Rapid freeze button ( ) again to cancel this function. The Rapid freeze indicator will turn off and return to normal setting. The rapid freezing function will be automatically cancelled after 24 hours, unless cancelled by the user. To freeze a large amount of fresh food, press the rapid freeze button before placing the food in the freezer compartment.

Refrigerator / User Guide	21 / 37 EN

Using the product

1

*2

(*)4 *3

																									5
13																									6
12
11.2
					11.1					10		9				8			7

Freezer compartment temperature settingEconomy mode

Energy saving function (display off)Power failure/High temperature / error

warning indicator

Cooler compartment temperature settingRapid cooling

Vacation function

Keypad lock / filter replacing alert cancellationWater, fragmented ice, ice cubes selectionIce making on/off

Display on/off/Alarm offAutoeco

Rapid freezing

*Optional: The figures in this user guide are intended as drafts and may not perfectly match C your product. If your product does not comprise the relevant parts, the information pertains

to other models.

	22 / 37 EN	Refrigerator / User Guide

Using the product

1. Freezer compartment temperature setting

Pressing the button ( ) will enable the freezer compartment temperature to be set at -18,-19,-

20,-21 ,-22,-23,-24,-18...

2. Economy mode

Indicates the refrigerator is running on energysaving mode. This indicator will be active when the freezer compartment temperature is set at -18 or the energy-saving cooling is engaged by eco-extra function. ( )

3.Energy saving function (display off)

If the product doors are kept closed for a long time energy saving function is automatically activated and energy saving symbol is illuminated. When energy saving function is activated, all symbols

on the display other than energy saving symbol will turn off. When the Energy Saving function is activated, if any button is pressed or the door is opened, energy saving function will be cancelled and the symbols on display will return to normal.

Energy saving function is activated during delivery from factory and cannot be cancelled.

4. Power failure/High temperature / error warning indicator

This indicator ( ) will light up in case of temperature faults or fault alerts. If you see this indicator is lit up, please see the "recommended solutions for problems" section in this guide.

This indicator illuminates during power failure, high temperature failures and error warnings. During sustained power failures, the highest temperature that the freezer compartment reaches will flash on the digital display. After checking the food located in the freezer compartment press the alarm off button to clear the warning.

Please refer to "remedies advised for troubleshooting" section on your manual if you observe that this indicator is illuminated.

5. Cooler compartment temperature setting

After pressing the button ( ), the cooler compartment temperature can be set to 8,7,6,5,4,3,2.. respectively.

6. Rapid cooling

For rapid cooling , press the button; this will activate the rapid cooling indicator ( ).

Press this button again to deactivate this function. Use this function when placing fresh foods into the cooler compartment or to rapidly cool the food items. When this function is activated, the

refrigerator will be engaged for 1 hour.

7. Vacation function

When the Vacation function ( ) is active, the cooler compartment temperature indicator displays the inscription "- -" and no cooling process will be active in the cooling compartment. This function is not suitable to keep food in the cooler compartment. Other compartments will remain cooled with the respective temperature set for each compartment.

Press the vacation function button again to cancel this function. ( )

8. Keypad lock / Keypad lock / filter replacing alert cancellation

Press keypad lock button ( ) to activate the keypad lock. You may also use this function to prevent changing the refrigerator's temperature settings. The refrigerator's filter must be replaced every 6 months. If you follow the instructions in the section 5.2, the refrigerator will automatically calculate the remaining period and the filter

replacing alert indicator (	) will light up when
filter expires.
Press and hold the button (	) for 3 seconds to
turn off the filter alert light.

9. Water, fragmented ice, ice cubes selection

Navigate the water ( ), ice cube ( ) and fragmented ice ) selections using the button number 8. The active indicator will remain lit.

10. Ice making on/off
Press the button (	) to cancel (	) or
activate (	) ice-making.

Refrigerator / User Guide	23 / 37 EN

Using the product

11.1 Display on/off

When you press the Display off button and when the ( ) function is lit, all the other icons of the display will go off and the display will enter the energy saving mode. When you press the Display off button again and when the( ) function is lit, all the other icons of the display will be lit and the display will exit the energy saving mode.

11.2 Alarm off warning

In case of power failure/high temperature alarm, after checking the food located in the freezer compartment press the alarm off button to clear

the warning.
12. Autoeco
Press the auto eco button (	), for 3 seconds

to activate this function. If the door remains closed for a long time when this function is activated, the cooler section will switch to economic mode. Press the button again to deactivate this function.

The indicator will light up after 6 hours when the

auto eco function is active. ( )

13. Rapid freezing

Press the button ( ) for rapid freezing. Press the button again to deactivate the function.

5.2. Humidity controlled crisper

(FreSHelf)

(This feature is optional)

Humidity rates of the vegetables and fruit are kept under control with the feature of humiditycontrolled crisper and the food is ensured to stay fresh for longer.

We recommend you to place the leafy vegetables such as lettuce, spinach and the vegetables which are sensitive to humidity loss, in a horizontal manner as much as possible inside the crisper, not on their roots in a vertical position.

While the vegetables are being placed, specific gravity of the vegetables should be taken into consideration. Heavy and hard vegetables should be put at the bottom of the crisper and the lightweight and soft vegetables should be placed over.

Never leave the vegetables inside the crisper in their bags. If the vegetables are left inside their bags, this will cause them to decompose in a short period of time. In case contacting with other vegetables is not preferred for hygiene concerns, use a perforated paper and other similar packaging materials instead of a bag.

Do not place together the pear, apricot, peach, etc. and apple in particular which have a high level of generation of ethylene gas in the same crisper with the other vegetables and fruit. The ethylene gas which is emitted by these fruit may cause the other fruit to ripen faster and decompose in a shorter time.

	24 / 37 EN	Refrigerator / User Guide

Using the product

5.3. Activating water filter change warning

(For products connected to the mains water line and equipped with filter)

Water filter change warning is activated as follows:

Automatic filter usage time calculation is not enabled ex factory. It must be enabled in products equipped with a filter.

The S4 display board we use in the refrigerator has a nine-key system. Set values are shown in the display.

Freezer Set

Quick Freeze/

(Eco Fuzzy)

Alarm Off	Ice On/Off	Dispenser	When the Key Lock	Vacation
		Mode	Filter reset

*(pressing 3 seconds)

After energising, press Alarm Off and Vacation buttons for 3 seconds to enter the password entry screen.

Password

Screen

Fridge Set

Quick Fridge

Refrigerator / User Guide	25 / 37 EN

Using the product

Press twice

Press once

“Upon seeing PS 0 screen, de-energise the refrigerator and energise it again. This way, the filter counter will be activated. The filter warning LED will be active on the display in 130 days. After replacing the filter with a new one, press the Key Lock button for 3 seconds to make the filter counter to count down from 130 days.

Repeat the steps given above to cancel this function.”

Filter warning light

Press for 3 seconds while the filter warning LED is active to reset the

	26 / 37 EN	Refrigerator / User Guide

Using the product

5.4. Using the water fountain

(for certain models)

CThe first few glasses of water taken from the fountain will normally be warm.

CIf the water fountain is not used for a long time, dispose of the first few glasses of water to get clean water.

You must wait approximately 12 hours to get cold water after first operating.

Use the display to select the water option, then pull the trigger to get water. Remove the glass shortly after pulling the trigger.

5.5. Filling the fountain water tank

Open the water tank’s lid, as shown in the figure. Fill in pure and clean drinking water. Close the lid.

Refrigerator / User Guide	27 / 37 EN

Using the product

5.6. Cleaning the water tank

Remove the water filling reservoir inside the door shelf.

Detach by holding both sides of the door shelf.

Hold both sides of the water tank and remove at 45° angle.

Remove and clean the water tank lid.

Do not fill the water tank with fruit juice, fizzy beverages, alcoholic beverages or any other liquids incompatible for use in the water fountain. Using such liquids will cause malfunction and irreparable

Adamage in the water fountain. Using the fountain in this way is not within the

scope of warranty. Such certain chemicals and additives in the beverages / liquids may cause material damage to the water tank.

The water tank and water fountain

Acomponents cannot be washed with dishwashers.

	28 / 37 EN	Refrigerator / User Guide

Using the product

5.7. Taking ice / water

(Optional)

To take water ( ) / ice cube ( ) / fragmented ice ( ), use the display to select the respective option. Take water/ice by pushing the trigger

on the water fountain forward. When switching between ice cube ( ) / fragmented ice ( ) options, the previous ice type may be discharged a few more times.

t The water may be cloudy during first use of the filter; do not consume the first 10 glasses of water.

t You must wait approximately 12 hours to get cold water after first installation.

t The product’s water system is designed for clean water only. Do not use any other beverages.

t It is recommended to disconnect the water supply if the product will not be used for long periods during vacation etc.

t If the water fountain is not used for a long time, the first 1-2 glasses of water received may be warm.

t You must wait approximately 12 hours before taking ice from the ice / water fountain for the first time. The fountain may not discharge ice if there is insufficient ice in the ice box.

t The 30 pieces of ice cubes (3-4 Litres) taken after first operating should not be used.

t In case of power blackout or temporary malfunction, the ice may partly melt and refreeze. This will cause the ice pieces to merge with each other. In case of extended power blackouts or malfunction, the ice may melt and leak out. If you experience this problem, remove the ice in the ice box and clean the box.

AWARNING: The product’s water system should be connected to cold water line only. Do not connect to hot water line.

5.8. Drip tray

(optional)

The water dripping from the water fountain accumulates on the drip tray; no water drainage is available. Pull the drip tray out or push on the edges to remove the tray. You may then discharge the water inside the drip tray.

t The product may not discharge water during first operation. This is caused by the air in the system. The air in the system must be

discharged. To do this, push the water fountain trigger for 1-2 minutes until the fountain discharges water. The initial water flow may be irregular. The water will flow normally once the air in the system is discharged.

Refrigerator / User Guide	29 / 37 EN