Beko GN1416233DZJGT User manual [EN,TW]

0 (0)

 

 

GN1416233DZJGB

GN1416221ZCX

GN1416233DZJGT

EN TW

Please read this manual before using the product!

Dear Customer,

We'd like you to make the best use of our product, which has been manufactured in modern facilities with care and meticulous quality controls.

Thus, we advice you to read the entire user manual before you use the product. In case the product changes hands, do not forget to hand the guide to its new owner along with the product.

This guide will help you use the product quickly and safely.

Please read the user guide carefully before installing and operating the product.

Always observe the applicable safety instructions.

Keep the user guide within easy reach for future use.

Please read any other documents provided with the product.

Keep in mind that this user guide may apply to several product models. The guide clearly indicates any variations of different models.

C Important information and useful tips.

A Risk of life and property.

B Risk of electric shock.

The product’s packaging is made of recyclable materials, in accordance with the National Environment Legislation.

1.

Safety and environment instructions3

 

 

 

2

Your Refrigerator

6

 

 

 

2

Your Refrigerator

7

 

 

 

3

Installation

8

3.1 Appropriate location for installation. . . . . . . . 8 3.2 Installing the plastic wedges . . . . . . . . . . . . 8 3.3* Adjusting the feet . . . . . . . . . . . . . . . . . . . . 9 3.4 Electric connection . . . . . . . . . . . . . . . . . . 10 3.5 Water connection . . . . . . . . . . . . . . . . . . . 10 3.6 Connecting water hose to the product . . . . 11 3.7 Connecting to water mains . . . . . . . . . . . . 11 3.8. For products using water carboy . . . . . . . . 12 3.9. Fixing external filter on the wall (Optional) . 13

4 Preparation

15

4.1 Things to be done for saving energy . . . . 15

4.2 Recommendations about the fresh food compartment . . . . . . . . . . . . . . . . . . . . . 15

4.3 Initial use . . . . . . . . . . . . . . . . . . . . . . . . 16

5 Operating the product

17

5.1 Indicator panel . . . . . . . . . . . . . . . . . . . . . 17 5.2 Indicator panel . . . . . . . . . . . . . . . . . . . . 22 5.3 Freezing fresh food . . . . . . . . . . . . . . . . . . 24

5.4 Recommendations for preserving the frozen food . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

5.5 Deep-freeze information . . . . . . . . . . . . . . 24 5.6 Placing the food . . . . . . . . . . . . . . . . . . . . 25 5.7 Door open warning . . . . . . . . . . . . . . . . . . 25 5.8 Chiller compartment . . . . . . . . . . . . . . . . . 25 5.9 Crisper . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 5.10 Humidity-controlled crisper . . . . . . . . . . . 25 (FreSHelf) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 5.11 Egg tray . . . . . . . . . . . . . . . . . . . . . . . . . 26 5.12 Movable Middle Section . . . . . . . . . . . . . 26 5.13 Multi Zone Storage Compartment . . . . . . 26 5.14 Blue light . . . . . . . . . . . . . . . . . . . . . . . . .26 5.15 Odour filter . . . . . . . . . . . . . . . . . . . . . . . 26 5.16 Cellar compartment. . . . . . . . . . . . . . . . . 27 5.17 Using internal water dispenser. . . . . . . . . 28 5.18 Dispensing water. . . . . . . . . . . . . . . . . . . 28 5.19 For using water dispenser . . . . . . . . . . . . 29 5.20 Icematic . . . . . . . . . . . . . . . . . . . . . . . . . 30 5.21 Icematic and ice storage container . . . . . . 30

6

Care and Cleaning

31

 

 

 

6

Care and Cleaning

32

 

 

 

7.

Troubleshooting

33

 

 

 

 

2 /34 EN

Refrigerator / User Manual

 

 

 

1. Safety and environment instructions

This section provides the safety instructions necessary to prevent the risk of injury and material damage. Failure to observe these instructions will invalidate all types of product warranty.

Intended use

WARNING:

A Keep ventilation openings, in the appliance enclosure or in the built-instructure, clear of obstruction.

WARNING:

Do not use mechanical A devices or other means to

accelerate the defrosting process, other than those recommended by the manufacturer.

A WARNING:

Do not damage the refrigerant circuit.

WARNING:

Do not use electrical A appliances inside the food

storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

This appliance is intended to be used in household and similar applications such as

staff kitchen areas in shops, offices and other working environments;

farm houses and by clients in hotels, motels and other residential type environments;

bed and breakfast type environments;

catering and similar non-retail applications.

1.1. General safety

This product should not be used by persons with physical, sensory and mental disabilities, without sufficient knowledge and experience or by children. The device can only be used by such persons under supervision and instruction of a person responsible for their safety. Children should not be allowed to play with this device.

In case of malfunction, unplug the device.

After unplugging, wait at least 5 minutes before plugging in again.

Unplug the product when not in use.

Do not touch the plug with wet hands! Do not pull the cable to plug off, always hold the plug.

Do not plug in the refrigerator if the socket is loose.

Unplug the product during installation, maintenance, cleaning and repair.

If the product will not be used for a while, unplug the product and remove any food inside.

Do not use the product when the compartment with circuit cards located on the upper back part of the product (electrical card box cover) (1) is open.

1

1

Do not use steam or steamed cleaning materials for cleaning the refrigerator and melting the ice inside. Steam may

 

3 / 34EN

Refrigerator / User Manual

 

 

 

Important instructions regarding safety and environment

contact the electrified areas and cause short circuit or electric shock!

Do not wash the product by spraying or pouring water on it! Danger of electric shock!

In case of malfunction, do not use the product, as it may cause electric shock. Contact the authorised service before doing anything.

Plug the product into an earthed socket. Earthing must be done by a qualified electrician.

If the product has LED type lighting, contact the authorised service for replacing or in case of any problem.

Do not touch frozen food with wet hands! It may adhere to your hands!

Do not place liquids in bottles and cans into the freezer compartment. They may explode.

Place liquids in upright position after tightly closing the lid.

Do not spray flammable substances near the product, as it may burn or explode.

Do not keep flammable materials and products with flammable gas (sprays, etc.) in the refrigerator.

Do not place containers holding liquids on top of the product. Splashing water on an electrified part may cause electric shock and risk of fire.

Exposing the product to rain, snow, sunlight and wind will cause electrical danger. When relocating the product, do not pull by holding the door handle. The handle may come off.

Take care to avoid trapping any part of your hands or body in any of the moving parts inside the product.

Do not step or lean on the door, drawers and similar parts of the refrigerator. This will cause the product to fall down and cause damage to the parts.

Take care not to trap the power cable.

1.1.1 HC warning

If the product comprises a cooling system using R600a gas, take care to avoid damaging the cooling system and its pipe while using and moving the product. This gas is flammable. If the cooling system

is damaged, keep the product away from sources of fire and ventilate the room immediately.

CThe label on the inner left side indicates the type of gas used in the product.

1.1.2 For models with water dispenser

Pressure for cold water inlet shall be maximum 90 psi (620 kPa). If your water pressure exceeds 80 psi (550 kPa), use a pressure limiting valve in your mains system. If you do not know how to check your water pressure, ask for the help of a professional plumber.

If there is risk of water hammer effect in your installation, always use a water hammer prevention equipment in your installation. Consult Professional plumbers if you are not sure that there is no water hammer effect in your installation.

Do not install on the hot water inlet. Take precautions against of the risk of freezing of the hoses. Water temperature operating interval shall

be 33°F (0.6°C) minimum and 100°F (38°C) maximum.

 

4 /34 EN

Refrigerator / User Manual

 

 

 

Important instructions regarding safety and environment

Use drinking water only.

1.2. Intended use

This product is designed for home use. It is not intended for commercial use.

The product should be used to store food and beverages only.

Do not keep sensitive products requiring controlled temperatures (vaccines, heat sensitive medication, medical supplies, etc.) in the refrigerator.

The manufacturer assumes no responsibility for any damage due to misuse or mishandling.

Original spare parts will be provided for 10 years, following the product purchasing date.

1.3.Child safety

Keep packaging materials out of children’s reach.

Do not allow the children to play with the product.

If the product’s door comprises a lock, keep the key out of children’s reach.

1.4.Compliance with WEEE Directive and Disposing of the Waste Product

This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).

This product has been manufactured

with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the

waste product with normal domestic and other wastes at the end of its service life. Take it to the collection

center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.

1.5. Compliance with RoHS Directive

This product complies with EU WEEE Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

1.6. Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

 

5 / 34EN

Refrigerator / User Manual

 

 

 

Beko GN1416233DZJGT User manual

2 Your Refrigerator

*2

1

4

*3

 

5

5

 

6

 

7

*8

9

10

11

1- Control and indicator panel

7-

Chiller compartment

2- Butter & Cheese section

8-

Icebox drawer

3- 70 mm moving door shelf

9-

Cellar compartment shelf

4- Fridge compartment glass shelf

10Freezer compartment drawers

5-

Fridge compartment crisper

11Multizone Compartment's drawer

6-

Gallon door shelf

* OPTIONAL

CFigures in this user manual are schematic and may not match the product exactly. If the subject parts are not included in the product you have purchased, then those parts are valid for other models.

 

6 /34 EN

Refrigerator / User Manual

 

 

 

2 Your Refrigerator

1

*2

 

 

4

*3

 

 

 

5

5

 

6

 

7

 

 

9 *8

10

1- Control and indicator panel

7-

Chiller compartment

2- Butter & Cheese section

8-

Icebox drawer

3- 70 mm moving door shelf

9-

Cellar compartment shelf

4- Fridge compartment glass shelf

10Freezer compartment drawers

5- Fridge compartment crisper

* OPTIONAL

6- Gallon door shelf

 

 

CFigures in this user manual are schematic and may not match the product exactly. If the subject parts are not included in the product you have purchased, then those parts are valid for other models.

7 / 34EN

Refrigerator / User Manual

 

 

3Installation

3.1Appropriate location

for installation

Contact an Authorized Service for the installation of the product. In order to prepare the product for use, refer the information in the user manual and ensure that electrical installation and water installation are appropriate. If not, call a qualified electrician and technician to have any necessary arrangements carried out.

BWARNING: Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.

BWARNING: Product must not be plugged in during installation. Otherwise, there is the risk of death or serious injury!

WARNING: : If the door clearance of the room where the product shall be placed is Aso tight to prevent passing of the product, remove the door of the room and pass the

product through the door by turning it to its side; if this does not work, contact the authorized service.

Place the product on a level floor surface to prevent jolts.

Install the product at least 30 cm away from heat sources such as hobs, heater cores and stoves and at least 5 cm away from electrical ovens.

Product must not be subjected to direct sun light and kept in humid places.

Appropriate air ventilation must be provided around your product in order to achieve an efficient operation. If the product is to be placed in a recess in the wall, pay attention to leave at least 5 cm distance with the ceiling and side walls.

Do not install the product in places where the temperature falls below -5°C.

3.2 Installing the plastic wedges

Plastic wedges supplied with the product are used to create the distance for the air circulation between the product and the rear wall.

1. To install the wedges, remove the screws on the product and use the screws supplied together with the wedges.

2. Insert the 2 plastic wedges onto the rear ventilation cover as illustrated in the figure.

 

8 /34 EN

Refrigerator / User Manual

 

 

 

Installation

3.3* Adjusting the feet

If the product stands unbalanced after installation, adjust the feet on the front by rotating them to the right or left.

*If your product does not have a wine compartment or is not a glass door, your product does not have adjustable stands, the product has fixed stands.

To adjust the doors vertically,

Loosen the fixing nut located at the bottom.

Rotate the adjusting nut according to the position of the door (clockwise/counter-clockwise).

Tighten the fixing nut in order to fix the position. To adjust the doors horizontally,

Loosen the fixing nut located at the top.

Rotate the side adjusting nut according to the position of the door (clockwise/counter-clockwise).

Tighten the fixing nut which is at the top in order to fix the position.

adjusting nut

fixing nut

fixing nut

adjusting nut

 

9 / 34EN

Refrigerator / User Manual

 

 

 

Installation

-Upper hinge group is fixed with 3 screws.

-The hinge cover is attached after the sockets are installed.

- Then the hinge cover is fixed with two screws.

3.4 Electric connection

AWARNING: Do not make connections via extension cables or multi-plugs.

BWARNING: Damaged power cable must be replaced by the Authorized Service Agent.

CIf two coolers are to be installed side by side, there should be at least 4 cm distance between them.

Our company shall not be liable for any damages that will arise when the product is used without grounding and electrical connection in accordance with the national regulations.

Power cable plug must be within easy reach after installation.

Do not extension cords or cordless multiple outlets between your product and the wall outlet.

3.5 Water connection

(Optional)

AWARNING: Unplug the product and the water pump (if available) during connection.

The product’s water mains, filter and carboy connections must be rendered by authorizer service. The product can be connected to a carboy or directly to the water mains, depending on the model. To establish the connection, the water hose must first be connected to the product.

Check to see the following parts are supplied with your product’s model:

1

2

 

3

4

*5

1.Connector (1 piece): Used to attach the water hose to the rear of the product.

2.Hose clip (3 pieces): Used to fix the water hose on the wall.

3.Water hose (1 piece, 5 meter diameter 1/4 inches): Used for the water connection.

4.Faucet adapter (1 piece): Comprises a porous filter, used for connection to the cold water mains.

5.Water filter (1 piece *Optional): Used to connect the mains water to the product. Water filter is not required if carboy connection is available.

 

10 /34 EN

Refrigerator / User Manual

 

 

 

Installation

3.6 Connecting water hose to the product

To connect the water hose to the product, follow the instructions below.

1.Remove the connector on the hose nozzle adaptor in the back of the product and run the hose through the connector.

3.7 Connecting to water mains

(Optional)

To use the product by connecting to the cold water mains, a standard 1/2” valve connector must be installed to the cold water mains in your home. If the connector is not available or if you are unsure, consult a qualified plumber.

1.Detach the connector (1) from the faucet adaptor (2).

2. Push the water hose down tightly and connect

3

2

1

to the hose nozzle adaptor.

 

 

 

 

 

3.Tighten the connector manually to fix on the hose nozzle adaptor. You may also tighten the connector using a pipe wrench or pliers.

4.Connect the other end of the hose to the water mains (See Section 3.7) or, to use carboy, to the water pump (See Section 3.8).

2.Connect the faucet adaptor to the water mains valve.

3. Attach the connector around the water hose.

 

11 / 34EN

Refrigerator / User Manual

 

 

 

Installation

1.Attach the connector into the faucet adaptor and tighten by hand / tool.

2.To avoid damaging, shifting or accidentally disconnecting the hose, use the clips provided to fix the water hose appropriately.

AWARNING: After turning the faucet on, make sure there is no water leak on either end of the water hose. In case of leakage, turn the valve off and tighten all connections using a pipe wrench or pliers.

3.8. For products using water carboy

(Optional)

To use a carboy for the product’s water connection, the water pump recommended by the authorized service must be used.

1.Connect one end of the water hose provided with the pump to the product (see 3.6) and follow the instructions below.

2.Connect the other end of the water hose to the water pump by pushing the hose into the pump’s hose inlet.

3.Place and fasten the pump hose inside the carboy.

4.Once the connection is established, plug in and start the water pump.

CPlease wait 2-3 minutes after starting the pump to achieve the desired efficiency.

CSee also the pump’s user guide for water connection.

CWhen using carboy, water filter is not required.

 

 

 

 

 

 

 

 

 

 

12 /34 EN

Refrigerator / User Manual

 

 

 

 

product.
WARNING: Do not fix the filter on the

Installation

3.9. Fixing external filter on Athe wall (Optional)

Check to see the following parts are supplied with your product’s model:

 

5

 

 

4

 

6

 

 

1

2

3

1.Connector (1 piece): Used to attach the water hose to the rear of the product.

2.Faucet adapter (1 piece): Used for connection to the cold water mains.

3.Porous filter (1 piece)

4.Hose clip (3 pieces): Used to fix the water hose on the wall.

5.Filter connecting apparatus (2 pieces): Used to fix the filter on the wall.

6.Water filter (1 piece): Used to connect the product to the water mains. Water filter is not necessary when using carboy connection.

1.Connect the faucet adaptor to the water mains valve.

2.Determine the location to fix the external filter. Fix the filter’s connecting apparatus (5) on the wall.

3.Attach the filter in upright position on the filter connecting apparatus, as indicated on the label. (6)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

13 / 34EN

Refrigerator / User Manual

 

 

 

 

 

 

 

 

 

 

 

 

 

Installation

1.Attach the water hose extending from the top of the filter to the product’s water connection adaptor, (see 3.6.)

After completing the image below link shall be as specified.

Water line:

Carboy line:

CDo not use the first 10 glasses of water after connecting the filter.

 

14 /34 EN

Refrigerator / User Manual

 

 

 

Temperature of the room where your
refrigerator is located should at least be 10ºC /50°F. Operating your
refrigerator under cooler conditions is not recommended with regard to its efficiency.
Inside of your refrigerator must be cleaned thoroughly.
Connecting your refrigerator to systems that save energy is dangerous as they may cause damage on the product.

4 Preparation

4.1 Things to be done for Asaving energy

• Do not leave the doors of your refrigerator open for a long time.

• Do not put hot food or drinks in your refrigerator.

• Do not overload the refrigerator. Cooling capacity will fall when the air circulation in the refrigerator is hindered.

• Do not place the refrigerator in places subject to direct sunlight. Install the product at least 30 cm away from heat sources such as hobs, ovens, heater units and stoves and at least 5 cm away from electrical ovens.

• Pay attention to store your food in refrigerator in closed containers.

• To be able store maximum food in the freezer compartment of your refrigerator, the upper drawer has to be removed and placed on top of glass shelf. Power consumption stated for your refrigerator has been determined after removing the icematic and the upper drawers as to allow maximum loading. It is strongly recommended to use the lower drawers in the freezer and the multizone compartment while loading.

• Airflow should not be blocked by placing foods in front of the freezer and the multizone compartment fans. Foods should be loaded by leaving minimum 5 cm space in front of the protective fan grid.

• Thawing the frozen foods in the fridge compartment both saves energy and reserves

the quality of the foods.

C

C

CIf two coolers are to be installed side by side, there should be at least 4 cm distance between them.

4.2 Recommendations about the fresh food compartment

Make sure that the food does not touch the temperature sensor in fresh food compartment. To allow the fresh food compartment to keep its ideal storage temperature, the sensor must not be hindered by food.

Do not place hot foods or beverages inside the product.

 

15 / 34EN

Refrigerator / User Manual

 

 

 

You will hear a noise when the compressor starts up. The liquids and gases sealed within the refrigeration system may also give rise to noise, even if the compressor is not running and this is quite normal.
Front edges of the refrigerator may feel warm. This is normal. These areas are designed to be warm to avoid condensation.

Preparation

4.3 Initial use

Before using the product, make sure that all preparations have been made in accordance with the instructions given in the "Important

instructions regarding safety and environment" and "Installation" chapters.

• Clean the interior of the refrigerator as recommended in the “Maintenance and cleaning” section. Before you start the refrigerator, make sure that the interior is dry.

• Plug the refrigerator in a grounded socket. The interior illumination is lit when the door of the refrigerator is opened.

• Operate the refrigerator for 6 hours without placing any food in it and do not open its door

unless it is necessary.

C

C

 

16 /34 EN

Refrigerator / User Manual

 

 

 

5 Operating the product

5.1 Indicator panel

Touch-controlled indicator panel allows you to set the temperature and control the other functions related to the refrigerator without opening the door of the product. Just press the relevant buttons for function settings.

 

1

2

3

4

5

6

9

1011

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12

 

 

 

 

 

 

 

 

 

 

 

 

33

 

Quick Cool

 

 

 

 

 

 

 

 

Quick Freeze

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 “

13

32

 

 

 

 

 

 

 

 

 

 

FN

14

 

 

 

 

 

 

 

 

 

 

 

 

15

 

 

 

 

 

 

 

 

 

 

 

 

31

 

Select

 

 

 

 

 

 

 

 

OK

16

30

 

3 “

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

29

28

27

*34.1*34.2

20

19

18 17

7 *8

Quick Cool

Select

Quick Freeze

3 “

FN

OK

26 *25 2423

22 21

CFigures in this user manual are schematic and may not match the product exactly. If the subject parts are not included in the product you have purchased, then those parts are valid for other models.

 

17 / 34EN

Refrigerator / User Manual

 

 

 

Use the quick freeze function when you want to quickly freeze the food placed in freezer compartment. If you want
to freeze large amounts of fresh food, activate this function before putting the food into the product.
If you do not cancel it, Quick Freeze will cancel itself automatically after 4 hours at the most or when the fridge compartment reaches to the required temperature.
This function is not recalled when power restores after a power failure.

Operating the product

1. Quick cooling function indicator

It turns on when the quick fridge function is activated.

2.Fridge compartment temperature indicator

Temperature of the fridge compartment is shown; it can be set to 8,7,6,5,4,3,2,1.

3.Fahrenheit indicator

It is a Fahrenheit indicator. When the Fahrenheit indication is activated, the temperature set values are shown in Fahrenheit and the relevant icon turns on.

4. Key lock

Press key lock button simultaneously for 3 seconds. Key lock symbol

will light up and key lock mode will be activated. Buttons will not function if the Key lock mode is active. Press key lock button simultaneously for 3 seconds again. Key lock symbol will turn off and the key lock mode will be exited.

Press the key lock button if you want to prevent changing of the temperature setting of the refrigerator.

5. Power failure/High temperature / error warning

This indicator illuminates during power failure, high temperature failures and error warnings. During long-term power failures, the highest temperature value that the freezer compartment reaches will blink on the digital display. After checking the food located in the freezer compartment, press the alarm off button to clear the warning.

Please refer to "solutions recommended for troubleshooting" section on your manual if you observe that this indicator is illuminated.

6. Filter reset icon

This icon turns on when the filter needs to be reset.

7. Temperature change cabin icon

Indicates the cabin whose temperature is to be changed. When the temperature change cabin icon starts flashing, it is understood that the relevant cabin has been selected.

8. Joker freezer icon

Hover over the Joker freezer icon using the FN button; the icon will start to flash. When you press the OK key, joker

cabin freezer icon turn on and operates as a freezer.

9. Freezer compartment temperature indicator

Temperature of the fridge compartment is shown; it can be set to -18, -19, -20, -21, -22, -23, -24.

10. Quick freeze function indicator

It turns on when the quick freeze function is activated.

11. Fahrenheit indicator

It is a Fahrenheit indicator. When the Fahrenheit indication is activated, the temperature set values are shown in Fahrenheit and the relevant icon turns on.

12. Quick freeze function button

Press this button to activate or deactivate the quick freeze function. When you activate the function, the freezer compartment will be cooled to a

temperature lower than the set value.

C

C

C

13. Filter reset

The filter is reset when the quick freeze button is pressed for 3 seconds. Filter reset icon goes off.

 

18 /34 EN

Refrigerator / User Manual

 

 

 

on or off.
previously can be taken from the icematic.
23. Eco fuzzy function icon
Press the FN key (until it reaches the letter e icon and the lower line) to activate the eco fuzzy. When you hover over the eco fuzzy icon and the eco fuzzy function indicator, they start flashing. Thus, you can understand whether the eco fuzzy
function will be activated or deactivated. When you press the OK button, the eco fuzzy function icon lights continuously and the Indicator continues to flash during this process. If you do not press any button after 20 seconds, the icon and the indicator remains on. Thus, the eco fuzzy function is activated. In order to cancel the eco fuzzy function,
selected. However, ice made
will stop when this function is
Water flow from water tank
Indicates whether the icematic is
Press the FN key (until it reaches the ice icon and the lower line) to switch off the ice machine. The ice machine off icon and the ice machine function indicator start flashing when you hover over them, thus you can understand whether the ice machine will be turned on or off. When you press the OK button, the ice machine icon lights continuously and the Indicator continues to flash during this process. If you do not press any button after 20 seconds, the icon and the indicator remains on. Thus, the ice machine is switched off. In order to switch on the ice machine again, hover over the icon and the indicator; thus, both the ice machine off icon and the indicator will start flashing. If you do not press any button within 20 seconds, the icon and the indicator will go off and thus the ice
machine will be switched on again.
C
C
21. Setting the Celsius and Fahrenheit indicator
Hover over this key using the FN key and select Fahrenheit and Celsius via the OK key. When the relevant temperature type is selected, the Fahrenheit and Celsius indicator turns on.
22. Ice machine off icon

Operating the product

14. FN button

Using this key, you can switch between the functions that you want to select. Upon pressing this key, the icon, whose function is required to be activated or deactivated, and this icon's indicator starts flashing. The FN button gets deactivated if not pressed for 20 seconds. You need to press this button to change the functions again.

15. Celsius indicator

It is a Celsius indicator. When the Celsius indication is activated, the temperature set values are shown in Celsius and the relevant icon turns on.

16. OK button

After navigating the functions using the FN button, when the function is cancelled via the OK button, the relevant icon and the indicator flashes. When the function is activated, it remains on. The indicator continues to flash in order to show the icon it is on.

17.Temperature change cabin icon

Indicates the cabin whose temperature is to be changed. When the temperature change cabin icon starts flashing, it is understood that the relevant cabin has been selected.

18.Temperature change cabin icon

Indicates the cabin whose temperature is to be changed. When the temperature change cabin icon starts flashing, it is understood that the relevant cabin has been selected.

19. Set increasing button

Select the relevant cabin with the select button; the cabin icon representing the relevant cabin will start to flash. If you press the set increasing button during this process, the set value gets increased. If you keep pressing it in a loop, the set value returns to the beginning.

20. Temperature change cabin icon

Indicates the cabin whose temperature is to be changed. When the temperature change cabin icon starts flashing, it is understood that the relevant cabin has been selected.

 

19 / 34EN

Refrigerator / User Manual

 

 

 

Operating the product

hover over the icon and the indicator again and press the OK key. Thus, both the eco fuzzy function icon and the indicator will start flashing. If you do not press any button within 20 seconds, the icon and the indicator will go off and the eco fuzzy function will be cancelled.

24. Vacation function icon

Press the FN key (until it reaches the umbrella icon and the lower line) to activate the vacation function. When you hover over the vacation function icon and the vacation function indicator, they start flashing. Thus, you can understand whether the vacation function will be activated or deactivated. When you press the OK button, the vacation function icon lights continuously and thus the Vacation function is activated. The Indicator continues to flash during this process. Press the OK key to cancel the vacation function. Thus, both the vacation function icon and the indicator will start flashing and the vacation function will be cancelled.

25. Joker fridge icon

When you select the joker fridge icon using the FN button and press the OK key, the joker cabin turns into a fridge cabin and operates as a cooler.

26. Celsius indicator

It is a Celsius indicator. When the Celsius indication is activated, the temperature set values are shown in Celsius and the relevant icon turns on.

27. Set decreasing function

Select the relevant cabin with the select button; the cabin icon representing the relevant cabin will start to flash. If you press the set decreasing button during this process, the set value gets

decreased. If you keep pressing it in a loop, the set value returns to the beginning.

28. Temperature change cabin icon

Indicates the cabin whose temperature is to be changed. When the temperature change cabin icon starts flashing, it is understood that the relevant cabin has been selected.

29.Temperature change cabin icon

Indicates the cabin whose temperature is to be changed. When the temperature change cabin icon starts flashing, it is understood that the relevant cabin has been selected.

30.Key lock

Press key lock button simultaneously for 3 seconds. Key lock symbol

will light up and key lock mode will be activated. Buttons will not function if the Key lock mode is active. Press key lock button simultaneously for 3 seconds again. Key lock symbol will turn off and the key lock mode will be exited.

Press the key lock button if you want to prevent changing of the temperature setting of the refrigerator.

31.Select button

Use this button to select the cabin whose temperature you want to change. Switch between the cabins by pressing this button. The selected cabin can be understood from the cabin icons

(7,17,18,20,28,29). Whichever cabin icon is flashing, the cabin, whose temperature set value you want to change, is selected. Then, you can change the set value by pressing the cabin set value decreasing button (27) and the cabin set value increasing button (19). If you do not press the select button for 20 seconds, the cabin icons will go off. You need to press this key to select a cabin again.

32. Alarm off warning

In case of power failure/high temperature alarm, after checking the foods in the freezer compartment, press the alarm off button to clear the warning.

33. Quick cooling function button

The button has two functions. To activate or deactivate the quick cool function, press it briefly. Quick Cool indicator will turn off and the product will return to its normal settings.

 

20 /34 EN

Refrigerator / User Manual

 

 

 

Operating the product

CUse quick cooling function when you want to quickly cool the food placed in the fridge compartment. If you want to cool large amounts of fresh food,

activate this function before putting the food into the product.

CIf you do not cancel it, quick cooling will cancel itself automatically after 8 hours at the most or when the fridge compartment reaches to the required temperature.

CIf you press the quick cooling button repeatedly with short intervals, the electronic circuit protection will be activated and the compressor will not start up immediately.

CThis function is not recalled when power restores after a power failure.

34. 1 Joker temperature indicator

Temperature set values of the joker cabin are displayed.

34. 2 Wine cooler compartment tempature indicator

Tempature set values of the winecabin are displayed.

 

21 / 34EN

Refrigerator / User Manual

 

 

 

Loading...
+ 49 hidden pages