Beko GN1416223ZX, BGN532DXP User manual [EN,FR]

GN1416223ZX
BGN532DXP

EN FR

Please read this manual before using the product!

Dear Customer,
We'd like you to make the best use of our product, which has been manufactured in modern facilities

with care and meticulous quality controls.
Thus, we advice you to read the entire user manual before you use the product. In case the product

changes hands, do not forget to hand the guide to its new owner along with the product.

This guide will help you use the product quickly and safely.

• Please read the user guide carefully before installing and operating the product.

• Always observe the applicable safety instructions.

• Keep the user guide within easy reach for future use.

• Please read any other documents provided with the product.

Keep in mind that this user guide may apply to several product models. The guide clearly indicates any
variations of different models.

Important information and useful

C

tips.

Risk of life and property.

A

Risk of electric shock.

B

The product’s packaging is made of
recyclable materials, in accordance
with the National Environment
Legislation.

1 Important Instructions Regarding
Safety and Environment 3

2 Your Refrigerator 7

2 Your Refrigerator 8

3 Installation 9

3.1 Appropriate location for installation . . . . . . . .9

3.2 Installing the plastic wedges . . . . . . . . . . . . .9

3.3* Adjusting the feet . . . . . . . . . . . . . . . . . . .10

3.4 Electric connection . . . . . . . . . . . . . . . . . . .11

4 Preparation 12

4.1 Things to be done for saving energy . . . . .12

4.2 Recommendations about the fresh food

compartment. . . . . . . . . . . . . . . . . . . . . .12

4.3 Initial use. . . . . . . . . . . . . . . . . . . . . . . . .13

5 Operating the product 14

5.1 Indicator panel . . . . . . . . . . . . . . . . . . . . . .14

5.2 Indicator panel. . . . . . . . . . . . . . . . . . . . .19

5.3 Freezing fresh food. . . . . . . . . . . . . . . . . . .22

5.4 Recommendations for preserving the frozen

food . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

5.5 Deep-freeze information. . . . . . . . . . . . . . .22

5.6 Placing the food. . . . . . . . . . . . . . . . . . . . .23

5.7 Door open warning. . . . . . . . . . . . . . . . . . .23

5.8 Chiller compartment. . . . . . . . . . . . . . . . . .23

5.9 Crisper. . . . . . . . . . . . . . . . . . . . . . . . . . . .23

5.10 Humidity-controlled crisper. . . . . . . . . . . .23

(FreSHelf). . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

5.11 Egg tray. . . . . . . . . . . . . . . . . . . . . . . . . .24

5.12 Movable Middle Section . . . . . . . . . . . . . .24

5.13 Cool Control Storage Compartment . . . . .24

5.14 Blue light . . . . . . . . . . . . . . . . . . . . . . . . .24

5.15 Odour filter. . . . . . . . . . . . . . . . . . . . . . . .24

5.16 Wine cellar compartment . . . . . . . . . . . . .25

5.17 Using internal water dispenser . . . . . . . . .26

5.18 Dispensing water . . . . . . . . . . . . . . . . . . .26

5.19 For using water dispenser. . . . . . . . . . . . .27

5.20 Icematic . . . . . . . . . . . . . . . . . . . . . . . . .27

5.21 Icematic and ice storage container . . . . . .28

6 Maintenance and Cleaning 29

7. Troubleshooting 30

2 / 30 EN

Refrigerator / User Manual

1 Important Instructions Regarding Safety and Environment

This chapter contains safety information
that will help you avoid the risk personal
injury or property damage. Failure to follow
these instructions shall render any product
warranty void.

Intended use

WARNING:

Keep ventilation openings, in

A

A

A

A

This appliance is intended to be used in
household and similar applications such as
– staff kitchen areas in shops, offices and
other working environments;
– farm houses and by clients in hotels,
motels and other residential type
environments;
– bed and breakfast type environments;
– catering and similar non-retail applications.

1.1. General Safety

• Persons with physical, sensory or mental

disabilities; persons who lack experience
and information and children should not

the appliance enclosure or in
the built-instructure, clear of
obstruction.

WARNING:

Do not use mechanical
devices or other means to
accelerate the defrosting
process, other than those
recommended by the
manufacturer.

WARNING:

Do not damage the refrigerant
circuit.

WARNING:

Do not use electrical
appliances inside the food
storage compartments of the
appliance, unless they are of
the type recommended by the
manufacturer.

3 / 30 EN

approach, enter or play with the product.

• Failure to follow the instructions and

uncontrolled use of the product lead to
dangerous results!

• Unplug the product if you encounter a

failure during use.

• If the product malfunctions, it must not be

operated until repaired by the authorised
service provider. Risk of electric shock!

• Plug the product into a grounded socket

protected by a fuse that corresponds
to the value on its nameplate. Have a
qualified electrician ground the product.
Our company cannot be held responsible
for damages resulting from the failure to
use the product with a grounded socket
pursuant to local regulations.

• Unplug the product when not in use.

• Never wash the product by spreading

or pouring water onto it! Risk of electric
shock!

• Never touch the plug with wet hands!

• Never unplug the product by pulling the

cable. Always pull the plug by holding the
socket.

• Do not plug the refrigerator if the wall

socket is loose.

• Never connect your refrigerator to energy

saving devices. Such systems are harmful
to your product.

• Unplug the product during installation,

care, cleaning and repairing procedures.

• Always have the Authorised Service

Provider install the product and establish

its electrical connections. The manufacturer

Refrigerator / User Manual

Important instructions regarding safety and environment

cannot be held responsible for damages
caused by procedures performed by
unauthorised persons.

• Do not eat cone ice cream or ice cubes

immediately after you take them out of
the freezer compartment! This may cause
frostbite in your mouth!

• Do not touch frozen food with wet hands!

They may stick to your hand!

• Do not put bottled or canned liquid

beverages in the freezer compartment.
They may burst!

• Never use steam or steam cleaners to

clean or defrost the refrigerator. Steam
gets into contact with the live parts in
your refrigerator, causing short circuit or
electric shock!

• Do not use mechanical devices or other

means to accelerate the defrosting
process other than those recommended
by the manufacturer.

• Never use the parts in your refrigerator

such as the door and drawer as a means
of support or step. This may cause the
product to tip over or damage the parts
of it.

• Do not damage the parts where the

refrigerant is circulating with drilling or
cutting tools. The refrigerant that might
blow out when the gas channels of the
evaporator, pipe extensions or surface
coatings are punctured causes skin
irritations and eye injuries.

• Do not cover or block the ventilation holes

in your refrigerator with any object.

• Place the beverage with higher proofs

tightly closed and vertically.

• Do not use gaseous sprays near the

product since there is the risk or fire or
explosion!

• Flammable items or products that contain

flammable gases (e.g. spray) as well as
explosive materials should never be kept
in the appliance.

4 / 30 EN

• Do not place vessels filled with liquid

onto the product. Splashing water on
an electrical part may cause electric
chock or the risk of fire.

• Do not store items that need precise

temperature adjustment (such as
vaccines, heat-sensitive medication,
science materials etc.) in the
refrigerator.

• If you are not going to use the product

for a long time, unplug it and remove
the food in it.

• If there is a blue light on the

refrigerator, do not look at this light
with optical tools.

• Exposing the product to rain, snow,

sun or wind is dangerous in terms of
electrical safety.

• In products with mechanical control

(thermostat), wait for 5 minutes to plug
in the product again after unplugging.

• Do not overload the refrigerator.

Objects in the refrigerator may fall
down when the door is opened,
causing injury or damage. Similar
problems may arise if any object is
placed onto the product.

• If the product has a door handle, do not

pull the handle when re-locating the
product. The handle might be loose.

• Be careful not to jam your hand or any

other body part in the moving parts of
the refrigerator.

• Do not put your hand or any other

foreign materials into the ice machine
while it is operating.

1.1.1 Hydrocarbon (HC) Warning

• If your product's cooling system

contains R600a:
This gas is flammable. Therefore, pay
attention not to damage the cooling
system or the piping during use and
transportation. If damaged, keep the

Refrigerator / User Manual

Important instructions regarding safety and environment

product away from potential fire sources
that may cause it to catch fire and
ventilate the room where the product is
placed.

If the product is damaged and
if you see gas leak, please
keep away from the gas. It may

C

C
C

A

1.1.2 For Products with a Water
Dispenser/Ice Machine

• Pressure for cold water inlet shall be

• If there is a risk of water impact in

• Do not make installation on the hot

• Use drinking water only.

cause frostbite when it gets into
contact with the skin.
(including R134)

Ignore this warning if the cooling
system of your product contains
R134a.

Type of gas used in the product
is stated on the type plate which
is on the left wall inside the
refrigerator.

WARNING:

Never throw the product into fire
for disposal.

maximum 90 psi (620 kPa). If your
water pressure exceeds 80 psi (550
kPa), use a pressure limiting valve in
your mains system. If you do not know
how to check your water pressure, ask
for the help of a professional plumber.

your installation, always use a water
impact protection equipment in that
installation. Please consult professional
plumbers if you are not sure if there is
water impact in your installation.

water inlet.

• Take the necessary measures against

the freezing risk of the hoses. The
water temperature operating range
must be 0.6°C (33°F) minimum and
38°C (100°F) maximum.

WARNING:
Never connect the product

A

1.2. Intended Use

• This product has been designed for

domestic use. It is not suitable for
commercial use and it must not be
used out of its intended use.

• It must be used only for storing food.

• The manufacturer will not take any

responsibility for damages resulting
from improper use or transport.

• Original spare parts will be available for

10 years after the purchase date of the
product.

1.3. Children's Safety

• If there is a lock on the door of the

product, the key should be kept out of
the reach of children.

• Do not let children play with the

product.

A

to a cold water mains with a
pressure of 550 kPa (80 psi)
or above.

DANGER:

Before disposing your old
refrigerator or freezer:

• Children may get locked

inside.

• Remove the doors.

• Leave the shelves to

prevent children from
getting inside the product
easily.

5 / 30 EN

Refrigerator / User Manual

Important instructions regarding safety and environment

1.4. Compliance with the
WEEE Directive and Disposing
the Waste Product:

This product conforms to the EU
WEE Directive (2012/19 EU). This
product bears a classification symbol
for waste electrical and electronic
equipment (WEEE). This product has
been manufactured from high quality

parts and materials which can be
reused and are suitable for recycling. Therefore,
do not dispose the product with normal domestic
waste or other waste at the end of its service life.
Take it to a collection centre for recycling electrical
and electronic equipment. Please consult local
authorities to learn about the locations of such
collection centres.

1.5. Compliance with
the RoHS Directive:

The unit you have purchased conforms to the EU
RoHS Directive (2011/65/EU). It does not contain
harmful or prohibited materials specified in the
Directive.

1.6. Packaging Information

• Packaging materials of the product have been

manufactured from recyclable materials in
accordance with our National Environment
Regulations. Do not dispose the packaging
materials with normal domestic waste or other
types of waste. Take these materials to a
recycling point designated by local authorities.

A

DANGER:
Risk of Fire or Explosion:

• This product uses flammable
refrigerant.

• Do not use mechanical devices
to defrost the refrigerator.

• Do not use chemicals for
cleaning.

• Do not pierce the refrigerant
pipe.

• If the refrigerant pipe is pierced,
it must be repaired only by
licensed service personnel.

• Please consult the repair/user
manual before cleaning the
product. All safety instructions
must be followed.

• Dispose the product according to
federal or local regulations.

6 / 30 EN

Refrigerator / User Manual

2 Your Refrigerator

1

*2

5

10

*8

4

5

7

9

11

*3

6

1- Control and indicator panel
2- Butter & Cheese section
3- 70 mm moving door shelf
4- Fridge compartment glass shelf
5- Fridge compartment crisper
6- Gallon door shelf

Figures in this user manual are schematic and may not match the product exactly. If the subject parts
are not included in the product you have purchased, then those parts are valid for other models.

C

7- Chiller compartment
8- Icebox drawer
9- Multizone compartment glass shelf/cooler
10- Freezer compartment drawers
11- Multizone Compartment's drawer

* OPTIONAL

7 / 30 EN

Refrigerator / User Manual

2 Your Refrigerator

1

4

5

*8

10

5

7

9

*2

*3

6

1- Control and indicator panel
2- Butter & Cheese section
3- 70 mm moving door shelf
4- Fridge compartment glass shelf
5- Fridge compartment crisper
6- Gallon door shelf

Figures in this user manual are schematic and may not match the product exactly. If the subject parts
are not included in the product you have purchased, then those parts are valid for other models.

C

7- Chiller compartment
8- Icebox drawer
9- Multizone compartment glass shelf/cooler
10- Freezer compartment drawers
11- Multizone Compartment's drawer

* OPTIONAL

8 / 30 EN

Refrigerator / User Manual

3 Installation

3.1 Appropriate location
for installation

Contact an Authorized Service for the installation
of the product. In order to prepare the product
for use, refer the information in the user manual
and ensure that electrical installation and water
installation are appropriate. If not, call a qualified
electrician and technician to have any necessary
arrangements carried out.

WARNING: Manufacturer shall not

be held liable for damages that may

B
B

A

arise from procedures carried out by
unauthorized persons.

WARNING: Product must not be plugged

in during installation. Otherwise, there is
the risk of death or serious injury!

WARNING: : If the door clearance of the

room where the product shall be placed is
so tight to prevent passing of the product,
remove the door of the room and pass the
product through the door by turning it to
its side; if this does not work, contact the
authorized service.

1.

To install the wedges, remove the screws on the
product and use the screws supplied together with the
wedges.

2.

Insert the 2 plastic wedges onto the rear ventilation
cover as illustrated in the figure.

•Placetheproductonalevelfloorsurfaceto

prevent jolts.

•Installtheproductatleast30cmawayfrom

heat sources such as hobs, heater cores and
stoves and at least 5 cm away from electrical
ovens.

•Productmustnotbesubjectedtodirectsunlight

and kept in humid places.

•Appropriateairventilationmustbeprovided

around your product in order to achieve an
efficient operation. If the product is to be placed
in a recess in the wall, pay attention to leave at
least 5 cm distance with the ceiling and side
walls.

•Donotinstalltheproductinplaceswherethe

temperature falls below -5°C.

3.2 Installing the plastic wedges

Plastic wedges supplied with the product are
used to create the distance for the air circulation
between the product and the rear wall.

9 / 30 EN

Refrigerator / User Manual

Installation

3.3* Adjusting the feet

If the product stands unbalanced after installation,
adjust the feet on the front by rotating them to the
right or left.
*If your product does not have a wine
compartment or is not a glass door, your product
does not have adjustable stands, the product has
fixed stands.

To adjust the doors vertically,
Loosen the fixing nut located at the bottom.
Rotate the adjusting nut according to the position

of the door (clockwise/counter-clockwise).
Tighten the fixing nut in order to fix the position.
To adjust the doors horizontally,
Loosen the fixing nut located at the top.
Rotate the side adjusting nut according to the

position of the door (clockwise/counter-clockwise).
Tighten the fixing nut which is at the top in order to

fix the position.

adjusting nut

fixing nut

fixing nut

10 / 30 EN

adjusting nut

Refrigerator / User Manual

Installation

-Upper hinge group is fixed with 3 screws.

-The hinge cover is attached after the sockets are
installed.

- Then the hinge cover is fixed with two screws.

3.4 Electric connection

WARNING: Do not make connections via

A
B

C

• Our company shall not be liable for any

• Power cable plug must be within easy reach

• Do not extension cords or cordless multiple

extension cables or multi-plugs.

WARNING: Damaged power cable must

be replaced by the Authorized Service
Agent.

If two coolers are to be installed side
by side, there should be at least 4 cm
distance between them.

damages that will arise when the product
is used without grounding and electrical
connection in accordance with the national
regulations.

after installation.

outlets between your product and the wall
outlet.

11 / 30 EN

Refrigerator / User Manual

4 Preparation

4.1 Things to be done for
saving energy

Connecting your refrigerator to systems
that save energy is dangerous as they may

A

• Do not leave the doors of your refrigerator open

• Do not put hot food or drinks in your

• Do not overload the refrigerator. Cooling

• Do not place the refrigerator in places subject

• Pay attention to store your food in refrigerator

• To be able store maximum food in the freezer

• Airflow should not be blocked by placing

• Thawing the frozen foods in the fridge

C

cause damage on the product.

for a long time.

refrigerator.

capacity will fall when the air circulation in the
refrigerator is hindered.

to direct sunlight. Install the product at least
30 cm away from heat sources such as hobs,
ovens, heater units and stoves and at least 5
cm away from electrical ovens.

in closed containers.

compartment of your refrigerator, the upper
drawer has to be removed and placed on top
of glass shelf. Power consumption stated for
your refrigerator has been determined after
removing the icematic and the upper drawers
as to allow maximum loading. It is strongly
recommended to use the lower drawers in the
freezer and the multizone compartment while
loading.

foods in front of the freezer and the multizone
compartment fans. Foods should be loaded by
leaving minimum 5 cm space in front of the
protective fan grid.

compartment both saves energy and reserves
the quality of the foods.

Temperature of the room where your
refrigerator is located should at least
be

10ºC /50°F. Operating your

refrigerator under cooler conditions is not
recommended with regard to its efficiency.

If two coolers are to be installed side
by side, there should be at least 4 cm

C

distance between them.

4.2 Recommendations about the
fresh food compartment

• Make sure that the food does not touch the

temperature sensor in fresh food compartment.
To allow the fresh food compartment to keep
its ideal storage temperature, the sensor must
not be hindered by food.

• Do not place hot foods or beverages inside the

product.

C

Inside of your refrigerator must be cleaned
thoroughly.

12 / 30 EN

Refrigerator / User Manual

Preparation

4.3 Initial use

Before using the product, make sure that all
preparations have been made in accordance
with the instructions given in the "Important
instructions regarding safety and environment" and
"Installation" chapters.

• Clean the interior of the refrigerator as
recommended in the “Maintenance and
cleaning” section. Before you start the
refrigerator, make sure that the interior is dry.

• Plug the refrigerator in a grounded socket. The
interior illumination is lit when the door of the
refrigerator is opened.

• Operate the refrigerator for 6 hours without
placing any food in it and do not open its door
unless it is necessary.

You will hear a noise when the compressor
starts up. The liquids and gases sealed

C
C

within the refrigeration system may also
give rise to noise, even if the compressor is
not running and this is quite normal.

Front edges of the refrigerator may
feel warm. This is normal. These areas
are designed to be warm to avoid
condensation.

13 / 30 EN

Refrigerator / User Manual

5 Operating the product

5.1 Indicator panel

Touch-controlled indicator panel allows you to set the temperature and control the other functions related
to the refrigerator without opening the door of the product. Just press the relevant buttons for function
settings.

2 3

1

33

32

31

30

Select

3 “

27

28

29

4

*34.1

5 6

*34.2

7

*8

9

10 11

Quick FreezeQuick Cool

3 “

FN

OK

20

19

1718

Quick FreezeQuick Cool

3 “

12

13

14

15

16

C

FN

Select

3 “

26

*25

24

23

22

21

OK

Figures in this user manual are schematic and may not match the product exactly. If the subject parts
are not included in the product you have purchased, then those parts are valid for other models.

14 / 30 EN

Refrigerator / User Manual

Operating the product

1. Quick cooling function indicator

It turns on when the quick fridge function is
activated.

2. Fridge compartment temperature indicator

Temperature of the fridge compartment is shown;
it can be set to 8,7,6,5,4,3,2,1.

3. Fahrenheit indicator

It is a Fahrenheit indicator. When the Fahrenheit
indication is activated, the temperature set values
are shown in Fahrenheit and the relevant icon
turns on.

4. Key lock

Press key lock button simultaneously for 3 sec­onds. Key lock symbol

will light up and key lock mode will be activated.
Buttons will not function if the Key lock mode is
active. Press key lock button simultaneously for 3
seconds again. Key lock symbol will turn off and
the key lock mode will be exited.

Press the key lock button if you want to prevent
changing of the temperature setting of the
refrigerator.

5. Power failure/High temperature / error

warning

This indicator illuminates during power failure, high
temperature failures and error warnings. During
long-term power failures, the highest temperature
value that the freezer compartment reaches will
blink on the digital display. After checking the food
located in the freezer compartment, press the
alarm off button to clear the warning.

Please refer to "solutions recommended for
troubleshooting" section on your manual if you
observe that this indicator is illuminated.

6. Filter reset icon

This icon turns on when the filter needs to be
reset.

7. Temperature change cabin icon

Indicates the cabin whose temperature is to be
changed. When the temperature change cabin icon
starts flashing, it is understood that the relevant
cabin has been selected.

8. Joker freezer icon

Hover over the Joker freezer icon using the FN button; the
icon will start to flash. When you press the OK key, joker

cabin freezer icon turn on and operates as a freezer.

9. Freezer compartment temperature
indicator

Temperature of the fridge compartment is shown;
it can be set to -18, -19, -20, -21, -22, -23, -24.

10. Quick freeze function indicator

It turns on when the quick freeze function is
activated.

11. Fahrenheit indicator

It is a Fahrenheit indicator. When the Fahrenheit
indication is activated, the temperature set values
are shown in Fahrenheit and the relevant icon
turns on.

12. Quick freeze function button

Press this button to activate or deactivate the quick
freeze function. When you activate the function,
the freezer compartment will be cooled to a
temperature lower than the set value.

Use the quick freeze function when you
want to quickly freeze the food placed

C

C
C

13. Filter reset

The filter is reset when the quick freeze button is
pressed for 3 seconds. Filter reset icon goes off.

in freezer compartment. If you want
to freeze large amounts of fresh food,
activate this function before putting the
food into the product.

If you do not cancel it, Quick Freeze
will cancel itself automatically after 4
hours at the most or when the fridge
compartment reaches to the required
temperature.

This function is not recalled when
power restores after a power failure.

15 / 30 EN

Refrigerator / User Manual

Operating the product

14. FN button

Using this key, you can switch between the
functions that you want to select. Upon pressing
this key, the icon, whose function is required to be
activated or deactivated, and this icon's indicator
starts flashing. The FN button gets deactivated if
not pressed for 20 seconds. You need to press this
button to change the functions again.

15. Celsius indicator

It is a Celsius indicator. When the Celsius indication
is activated, the temperature set values are shown
in Celsius and the relevant icon turns on.

16. OK button

After navigating the functions using the FN button,
when the function is cancelled via the OK button,
the relevant icon and the indicator flashes. When
the function is activated, it remains on. The
indicator continues to flash in order to show the
icon it is on.

17. Temperature change cabin icon

Indicates the cabin whose temperature is to be
changed. When the temperature change cabin icon
starts flashing, it is understood that the relevant
cabin has been selected.

18. Temperature change cabin icon

Indicates the cabin whose temperature is to be
changed. When the temperature change cabin icon
starts flashing, it is understood that the relevant
cabin has been selected.

19. Set increasing button

Select the relevant cabin with the select button;
the cabin icon representing the relevant cabin will
start to flash. If you press the set increasing button
during this process, the set value gets increased. If
you keep pressing it in a loop, the set value returns
to the beginning.

20. Temperature change cabin icon

Indicates the cabin whose temperature is to be
changed. When the temperature change cabin icon
starts flashing, it is understood that the relevant
cabin has been selected.

16 / 30 EN

21. Setting the Celsius and Fahrenheit
indicator

Hover over this key using the FN key and select
Fahrenheit and Celsius via the OK key. When
the relevant temperature type is selected, the
Fahrenheit and Celsius indicator turns on.

22. Ice machine off icon

Press the FN key (until it reaches the ice icon and
the lower line) to switch off the ice machine. The
ice machine off icon and the ice machine function
indicator start flashing when you hover over them,
thus you can understand whether the ice machine
will be turned on or off. When you press the OK
button, the ice machine icon lights continuously
and the Indicator continues to flash during this
process. If you do not press any button after 20
seconds, the icon and the indicator remains on.
Thus, the ice machine is switched off. In order to
switch on the ice machine again, hover over the
icon and the indicator; thus, both the ice machine
off icon and the indicator will start flashing. If you
do not press any button within 20 seconds, the
icon and the indicator will go off and thus the ice
machine will be switched on again.

Indicates whether the icematic is

C
C

23. Eco fuzzy function icon

Press the FN key (until it reaches the letter e
icon and the lower line) to activate the eco fuzzy.
When you hover over the eco fuzzy icon and the
eco fuzzy function indicator, they start flashing.
Thus, you can understand whether the eco fuzzy
function will be activated or deactivated. When you
press the OK button, the eco fuzzy function icon
lights continuously and the Indicator continues to
flash during this process. If you do not press any
button after 20 seconds, the icon and the indicator
remains on. Thus, the eco fuzzy function is
activated. In order to cancel the eco fuzzy function,

on or off.

Water flow from water tank
will stop when this function is
selected. However, ice made
previously can be taken from the
icematic.

Refrigerator / User Manual

Operating the product

hover over the icon and the indicator again and
press the OK key. Thus, both the eco fuzzy function
icon and the indicator will start flashing. If you do
not press any button within 20 seconds, the icon
and the indicator will go off and the eco fuzzy
function will be cancelled.

24. Vacation function icon

Press the FN key (until it reaches the umbrella
icon and the lower line) to activate the vacation
function. When you hover over the vacation
function icon and the vacation function indicator,
they start flashing. Thus, you can understand
whether the vacation function will be activated or
deactivated. When you press the OK button, the
vacation function icon lights continuously and thus
the Vacation function is activated. The Indicator
continues to flash during this process. Press the
OK key to cancel the vacation function. Thus, both
the vacation function icon and the indicator will
start flashing and the vacation function will be
cancelled.

25. Joker fridge icon

When you select the joker fridge icon using the FN
button and press the OK key, the joker cabin turns
into a fridge cabin and operates as a cooler.

26. Celsius indicator

It is a Celsius indicator. When the Celsius indication
is activated, the temperature set values are shown
in Celsius and the relevant icon turns on.

27. Set decreasing function

Select the relevant cabin with the select button;
the cabin icon representing the relevant cabin
will start to flash. If you press the set decreasing
button during this process, the set value gets
decreased. If you keep pressing it in a loop, the set
value returns to the beginning.

28. Temperature change cabin icon

Indicates the cabin whose temperature is to be
changed. When the temperature change cabin icon
starts flashing, it is understood that the relevant
cabin has been selected.

29. Temperature change cabin icon

Indicates the cabin whose temperature is to be
changed. When the temperature change cabin icon
starts flashing, it is understood that the relevant
cabin has been selected.

30. Key lock

Press key lock button simultaneously for 3 sec­onds. Key lock symbol

will light up and key lock mode will be activated.
Buttons will not function if the Key lock mode is
active. Press key lock button simultaneously for 3
seconds again. Key lock symbol will turn off and
the key lock mode will be exited.

Press the key lock button if you want to prevent
changing of the temperature setting of the
refrigerator.

31.Select button

Use this button to select the cabin whose tem­perature you want to change. Switch between
the cabins by pressing this button. The selected
cabin can be understood from the cabin icons
(7,17,18,20,28,29). Whichever cabin icon is flash­ing, the cabin, whose temperature set value you
want to change, is selected. Then, you can change
the set value by pressing the cabin set value
decreasing button (27) and the cabin set value in­creasing button (19). If you do not press the select
button for 20 seconds, the cabin icons will go off.
You need to press this key to select a cabin again.

32. Alarm off warning

In case of power failure/high temperature
alarm, after checking the foods in the freezer
compartment, press the alarm off button to clear
the warning.

33. Quick cooling function button

The button has two functions. To activate or
deactivate the quick cool function, press it briefly.
Quick Cool indicator will turn off and the product
will return to its normal settings.

17 / 30 EN

Refrigerator / User Manual

Operating the product

Use quick cooling function when you
want to quickly cool the food placed

C

C

C
C

34. 1 Joker temperature indicator

Temperature set values of the joker cabin are
displayed.

34. 2 Wine cooler compartment tempature
indicator

Tempature set values of the winecabin are dis­played.

in the fridge compartment. If you want
to cool large amounts of fresh food,
activate this function before putting the
food into the product.

If you do not cancel it, quick cooling
will cancel itself automatically after 8
hours at the most or when the fridge
compartment reaches to the required
temperature.

If you press the quick cooling button
repeatedly with short intervals, the
electronic circuit protection will be
activated and the compressor will not
start up immediately.

This function is not recalled when
power restores after a power failure.

18 / 30 EN

Refrigerator / User Manual

Operating the product

5.2 Indicator panel

Touch-control indicator panel allows you to set the temperature and control the other functions related
to the product without opening the door of the refrigerator. Just press the relevant buttons for function
settings.

17

18 19

2

1

5

3

4

6

7

*9

8

13

10

12

*11

16

15

14

25

26

24

1-On/Off function

Press the On/Off button for 3 seconds to turn off or
turn on the fridge.

2. Quick freeze function button

Press this button to activate or deactivate the quick
freeze function. When you activate the function,
the freezer compartment will be cooled to a
temperature lower than the set value.

Use the quick freeze function when you
want to quickly freeze the food placed

C

C
C

in freezer compartment. If you want
to freeze large amounts of fresh food,
activate this function before putting the
food into the product.

If you do not cancel it, Quick Freeze
will cancel itself automatically after 4
hours at the most or when the fridge
compartment reaches to the required
temperature.

This function is not recalled when
power restores after a power failure.

3.Select button

Use this button to select the cabin whose
temperature you want to change. Switch between
the cabins by pressing this button. The selected

Figures in this user manual are schematic and may not match the product exactly. If the subject parts
are not included in the product you have purchased, then those parts are valid for other models.

C

21

22

23

*20

cabin can be understood from the cabin icons (6,
25, 24 ). Whichever cabin icon is power on, the
cabin, whose temperature set value you want to
change, is selected. Then, you can change the set
value by pressing the cabin set value Temperature
Adjustment button (4)

4.Temperature Adjustment / Temperature
Decrease

When pressed, decreases the temperature of the
selected compartment.

5-Quick freeze Indicator

This icon lits when the Quick freeze function is
active.

6. Fridge compartment indicator

When this indicator is active, the temperate
of the fridge compartment is displayed on the
temperature value indicator.Fridge compartment
can be set to 8, 7, 6, 5, 4, 3, 2 or 1°C / 46, 45,
44, 43, 42, 41, 40,39,38,37,36,35,34 or 33°F by
pressing Temperature Adjustment button (4).

7. Temperature value indicator

Shows the temperature value of the selected
compartment.

8. Fahrenheit indicator

It is a Fahrenheit indicator. When the Fahrenheit
indication is activated, the temperature set values
are shown in Fahrenheit and the relevant icon
turns on.

19 / 30 EN

Refrigerator / User Manual

Operating the product

9. Joker fridge icon

When you select the joker fridge icon using the FN
button (16) and press the OK button (17) the joker
cabin turns into a fridge cabin and operates as a
cooler.

10. Joker cabin icon

It shows joker cabin icon.

11. Joker freezer icon

When you select the joker freezer icon using the
FN button (16) and press the OK button (17) the
joker cabin turns into a freezer cabin and operates
as a freezer.

12. Power failure/High temperature / error
warning

This indicator illuminates during power failure, high
temperature failures and error warnings. During
long-term power failures, the highest temperature
value that the freezer compartment reaches will
blink on the digital display. After checking the food
located in the freezer compartment, press the
alarm off button (19) to clear the warning.

13.Setting the Celsius and Fahrenheit
indicator

Hover over this key using the FN key and select
Fahrenheit and Celsius via the OK key. When
the relevant temperature type is selected, the
Fahrenheit and Celsius indicator turns on.

14. Vacation function icon

Press the FN key (until it reaches the umbrella
icon) to activate the vacation function. When you
hover over the vacation function icon, it start
flashing. Thus, you can understand whether the
vacation function will be activated or deactivated.
When you press the OK button, the vacation
function indicator lights continuously and thus the
Vacation function is activated. Press the OK key
to cancel the vacation function. Thus, the vacation
function indicator will start flashing and the
vacation function will be cancelled.

15. Quick cooling function indicator

It turns on when the quick fridge function is
activated.

16. FN button

Using this key, you can switch between the
functions that you want to select. Upon pressing

20 / 30 EN

this key, the icon, whose function is required to be
activated or deactivated, and this icon’s indicator
starts flashing. The FN button gets deactivated if
not pressed for 20 seconds. You need to press this
button to change the functions again.

17. OK button

After navigating the functions using the FN button,
when the function is cancelled via the OK button,
the relevant indicator flashes. When the function is
activated, it remains on. The indicator continues to
flash in order to show the icon it is on.

18. Quick cooling function button

The button has two functions. To activate or
deactivate the quick cool function, press it briefly.
Quick Cool indicator will turn off and the product
will return to its normal settings.

19. Alarm off warning

In case of power failure/high temperature
alarm, after checking the foods in the freezer
compartment, press the alarm off button to clear
the High temperature warning icon (12).

20. Filter reset

The filter is reset when the alarm off button (19) is
pressed for 3 seconds. Filter reset icon goes off.

21. Eco fuzzy function icon

Press the FN key (until it reaches the letter e
icon) to activate the eco fuzzy. When you hover
over the eco fuzzy icon it start flashing. Thus,
you can understand whether the eco fuzzy
function will be activated or deactivated. When
you press the OK button, the eco fuzzy function
icon lights continuously during this process. If you
do not press any button after 20 seconds, the
icon remains on. Thus, the eco fuzzy function is
activated. In order to cancel the eco fuzzy function,
hover over the icon again and press the OK key.
Thus, the eco fuzzy function icon will start flashing.
If you do not press any button within 20 seconds,
the icon will go off and the eco fuzzy function will
be cancelled.

22. Ice machine off icon

Press the FN key (until it reaches the ice icon) to
switch off the ice machine. The ice machine off

Refrigerator / User Manual