GN1306211ZDX |
EN |
Please read these instructions first before using your appliance
Thank you for choosing a Beko appliance.
Please take some time to read this user manual before using your appliance, to ensure you know how to safely operate the controls and functions.
Carefully follow all unpacking and installation instructions to ensure the appliance is correctly connected and fitted prior to use.
Please write your product model and serial number on the last page of this user manual, and store in a safe location close to the appliance for easy future reference.
This user manual may also be applicable for several other models. Differences between models will be listed.
If you have any questions or concerns, please call our contact centre or find help and information online at www.beko.co.uk
Symbols and their descriptions
This instruction manual contains the following symbols:
C
AWarning against dangerous conditions for life and property.
BWarning against electric voltage.
1. |
Safety and environment instructions3 |
|
|
|
|
2 |
Your Refrigerator |
6 |
|
|
|
3 |
Installation |
7 |
3.1 Appropriate installation location . . . . . . . . . 7 3.2 Installing the plastic wedges . . . . . . . . . . . 7 3.3 Electrical connection . . . . . . . . . . . . . . . . . 7 3.4 Adjusting the feet . . . . . . . . . . . . . . . . . . . 8 3.5 Illumination lamp . . . . . . . . . . . . . . . . . . . .8 3.6 Door open warning . . . . . . . . . . . . . . . . . . 8 3.7 Water connection . . . . . . . . . . . . . . . . . . . 9 3.7.1 Before Installation. . . . . . . . . . . . . . . . . . 10
3.8 Connecting the water hose to the refrigerator . . . . . . . . . . . . . . . . . . . . . . . 10
3.9Connecting the water line to the water
supply . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3.10 Water filter . . . . . . . . . . . . . . . . . . . . . . . 10
3.10.1 Attaching the internal filter into the refrigerator . . . . . . . . . . . . . . . . . . . . . . . 10
3.11 Connecting the water hose to demijohn . . 12
3.12 Before starting to use the water/ice dispenser . . . . . . . . . . . . . . . . . . . . . . . . 13
3.13 Transportation of the product. . . . . . . . . . 14
4 Preparation |
15 |
4.1 Things to be done for energy saving . . . . 15
4.2 Recommendations for the fresh food compartment . . . . . . . . . . . . . . . . . . . . . 15
4.3 Initial use . . . . . . . . . . . . . . . . . . . . . . . . 16
5 Operating the product |
20 |
5.1 Indicator panel . . . . . . . . . . . . . . . . . . . . 20 5.2 Dual cooling system . . . . . . . . . . . . . . . . 21 5.3 Freezing fresh food . . . . . . . . . . . . . . . . . 21
5.4 Recommendations for preserving the frozen food . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
5.5 Placing the food . . . . . . . . . . . . . . . . . . . 23 5.6 Deep-freeze information . . . . . . . . . . . . . 23 5.7 Removing door shelves . . . . . . . . . . . . . . 24 5.8 Moving door rack . . . . . . . . . . . . . . . . . . . .24 5.9 Glass shelves . . . . . . . . . . . . . . . . . . . . . 24 5.10 Chiller compartment . . . . . . . . . . . . . . . . 24 5.11 Crisper . . . . . . . . . . . . . . . . . . . . . . . . . . 25 5.12 Humidity controlled crisper. . . . . . . . . . . . 25 (FreSHelf) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 5.13 Ice container . . . . . . . . . . . . . . . . . . . . . . 25 5.14 Butter & Cheese section . . . . . . . . . . . . . 26 5.15 Egg holder . . . . . . . . . . . . . . . . . . . . . . . 26 5.16 Movable middle section . . . . . . . . . . . . . 26 5.17 Blue light . . . . . . . . . . . . . . . . . . . . . . . . 26 5.18 Ion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 5.19 Odour filter . . . . . . . . . . . . . . . . . . . . . . . 27 5.20 Using internal water dispenser. . . . . . . . . 27 5.21 Dispensing Water . . . . . . . . . . . . . . . . . . 27 5.22For using water dispenser. . . . . . . . . . . . . 27 5.23 Icematic . . . . . . . . . . . . . . . . . . . . . . . . . 28 5.24 Icematic and ice storage container . . . . . . 28 5.25 Refrigerator Shelf Weight Limitations . . . . 29
6. |
Maintenance and cleaning |
30 |
6.1 |
Avoiding bad odours . . . . . . . . . . . . . . . . |
30 |
6.2 |
Protecting the plastic surfaces . . . . . . . . |
30 |
7. |
Troubleshooting |
31 |
|
2 /33 EN |
Refrigerator / User Manual |
|
|
|
1.Safety and environment instructions
This section provides the safety instructions necessary to prevent the risk of injury and material damage. Failure to observe these instructions will invalidate all types of product warranty.
Intended use
WARNING:
A Keep ventilation openings, in the appliance enclosure or in the built-instructure, clear of obstruction.
WARNING:
Do not use mechanical A devices or other means to
accelerate the defrosting process, other than those recommended by the manufacturer.
A WARNING:
Do not damage the refrigerant circuit.
WARNING:
Do not use electrical A appliances inside the food
storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
This appliance is intended to be used in household and similar applications such as
–staff kitchen areas in shops, offices and other working environments;
–farm houses and by clients in hotels, motels and other residential type environments;
–bed and breakfast type environments;
–catering and similar non-retail applications.
1.1. General safety
•This product should not be used by persons with physical, sensory and mental disabilities, without sufficient knowledge and experience or by children. The device can only be used by such persons under supervision and instruction of a person responsible for their safety. Children should not be allowed to play with this device.
•In case of malfunction, unplug the device.
•After unplugging, wait at least 5 minutes before plugging in again.
•Unplug the product when not in use.
•Do not touch the plug with wet hands! Do not pull the cable to plug off, always hold the plug.
•Do not plug in the refrigerator if the socket is loose.
•Unplug the product during installation, maintenance, cleaning and repair.
•If the product will not be used for a while, unplug the product and remove any food inside.
•Do not use the product when the compartment with circuit cards located on the upper back part of the product (electrical card box cover) (1) is open.
1
1 |
•Do not use steam or steamed cleaning materials for cleaning the refrigerator and melting the ice inside. Steam may
|
3 / 33 EN |
Refrigerator / User Manual |
|
|
|
Important instructions for safety and environment
contact the electrified areas and cause short circuit or electric shock!
•Do not wash the product by spraying or pouring water on it! Danger of electric shock!
•In case of malfunction, do not use the product, as it may cause electric shock. Contact the authorised service before doing anything.
•Plug the product into an earthed socket. Earthing must be done by a qualified electrician.
•If the product has LED type lighting, contact the authorised service for replacing or in case of any problem.
•Do not touch frozen food with wet hands! It may adhere to your hands!
•Do not place liquids in bottles and cans into the freezer compartment. They may explode.
•Place liquids in upright position after tightly closing the lid.
•Do not spray flammable substances near the product, as it may burn or explode.
•Do not keep flammable materials and products with flammable gas (sprays, etc.) in the refrigerator.
•Do not place containers holding liquids on top of the product. Splashing water on an electrified part may cause electric shock and risk of fire.
•Exposing the product to rain, snow, sunlight and wind will cause electrical danger. When relocating the product, do not pull by holding the door handle. The handle may come off.
•Take care to avoid trapping any part of your hands or body in any of the moving parts inside the product.
•Do not step or lean on the door, drawers and similar parts of the refrigerator. This will cause the product to fall down and cause damage to the parts.
•Take care not to trap the power cable.
1.1.1 HC warning
If the product comprises a cooling system using R600a gas, take care to avoid damaging the cooling system and its pipe while using and moving the product. This gas is flammable. If the cooling system
is damaged, keep the product away from sources of fire and ventilate the room immediately.
CThe label on the inner left side indicates the type of gas used in the product.
1.1.2 For models with water dispenser
•Pressure for cold water inlet shall be maximum 90 psi (620 kPa). If your water pressure exceeds 80 psi (550 kPa), use a pressure limiting valve in your mains system. If you do not know how to check your water pressure, ask for the help of a professional plumber.
•If there is risk of water hammer effect in your installation, always use a water hammer prevention equipment in your installation. Consult Professional plumbers if you are not sure that there is no water hammer effect in your installation.
|
4 /33 EN |
Refrigerator / User Manual |
|
|
|
Important instructions for safety and environment
•Do not install on the hot water inlet. Take precautions against of the risk of freezing of the hoses. Water temperature operating interval shall
be 33°F (0.6°C) minimum and 100°F (38°C) maximum.
•Use drinking water only.
1.2. Intended use
•This product is designed for home use. It is not intended for commercial use.
•The product should be used to store food and beverages only.
•Do not keep sensitive products requiring controlled temperatures (vaccines, heat sensitive medication, medical supplies, etc.) in the refrigerator.
•The manufacturer assumes no responsibility for any damage due to misuse or mishandling.
•Original spare parts will be provided for 10 years, following the product purchasing date.
1.3. Child safety
•Keep packaging materials out of children’s reach.
•Do not allow the children to play with the product.
•If the product’s door comprises a lock, keep the key out of children’s reach.
1.4. Compliance with WEEE Directive
and Disposing of the Waste Product
This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).
This product has been manufactured
with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the
waste product with normal domestic and other wastes at the end of its service life. Take it to the collection
center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.
1.5. Compliance with RoHS Directive
•This product complies with EU WEEE Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.
1.6. Package information
Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.
|
5 / 33 EN |
Refrigerator / User Manual |
|
|
|
2 Your Refrigerator
Congratulations on your choice a Beko quality Appliance which has been designed to give you service for many years.
|
*3 |
*13 |
*4 |
|
12 |
|
6*5 |
|
*11 |
10 |
1 |
|
*9 |
|
*7 |
|
*8 |
2
14 |
15 |
*17 |
16 |
|
1- |
Fridge compartment |
9- Crispers |
10İnner water dispenser |
||
2- |
ButFreezer compartment |
11Adjustable glass shelf |
3- |
Display/indicator panel |
12Blower |
4- Butter & cheese section |
13Water filter |
|
5- Fridge compartment door shelf |
14Ice container |
|
6- |
Eggy tray |
15Frozen food storage compartment (upper) |
7- |
Bottle shelf |
16Frozen food storage compartment (upper) |
8- |
Chiller compartment |
17Seperator |
CFigures in this user manual are schematic and may not match the product exactly. If the subject parts are not included in the product you have purchased, then those parts are valid for other models.
|
6 /33 EN |
Refrigerator / User Manual |
|
|
|
3 Installation
Refer to the nearest Authorised Service Agent for installation of the product. To make the product ready for use, make sure that the electricity installation is appropriate before calling the Authorised Service Agent. If not, call a qualified electrician to have any necessary arrangements carried out.
CPreparation of the location and electrical installation at the place of installation is under customer's responsibility.
BProduct must not be plugged in during installation. Otherwise, there is the risk of death or serious injury!
WARNING: Installation and electrical Bconnections of the product must be carried
out by the Authorised Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorised persons.
AWARNING: Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.
C Make sure that the power cable is not pinched or crushed while pushing the product into its place after installation or cleaning procedures.
3.1 Appropriate installation location
WARNING: If the door of the room where Athe product will be placed is too small for
the product to pass, then the product's doors must be removed and the product must be turned aside to pass it through.
•Choose a place at where you would use the product comfortably.
•Install the product at least 30 cm away from heat sources such as hobs, ovens, heater cores and stoves and at least 5 cm away from electrical ovens. Product must not be subjected
to direct sun light and kept in humid places after installation.
•Appropriate air ventilation must be provided around your product in order to achieve an efficient operation. If the product is to be placed in a recess in the wall, pay attention to leave at least 5 cm distance with the ceiling and side walls.
• Do not place the product on the materials such as rugs or carpets.
• Place the product on an even floor surface to prevent jolts.
• Do not install the product in places where the
temperature falls below 10ºC /50°F.
C
3.2 Installing the plastic wedges
Plastic wedges are used to create the distance for the air circulation between the product and the rear wall. Insert the 2 plastic wedges onto the rear ventilation cover as illustrated in the figure. To install the wedges, remove the screws on the product and use the screws given in the same pouch with the wedges.
3.3 Electrical connection
Connect the product to a grounded outlet protected by a fuse complying with the values in the rating plate. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.
•Electrical connection must comply with national regulations.
•Power cable plug must be within easy reach after installation.
•The voltage and allowed fuse or breaker protection are specified in the Rating Plate which is affixed to interior of the product. If the current value of the fuse or breaker in the house does not comply with the value in the
rating plate, have a qualified electrician install a suitable fuse.
•The specified voltage must be equal to your mains voltage.
•Do not make connections via extension cables or multi-plugs.
|
7 / 33 EN |
Refrigerator / User Manual |
|
|
|
Installation
BWARNING: Damaged power cable must be replaced by the Authorised Service Agents.
BWARNING: If the product has a failure, it should not be operated unless it is repaired by the Authorised Service Agent! There is the risk of electric shock!
3.4 Adjusting the feet
If the product stands unbalanced after installation adjust the feet. Taking help from someone to slightly lift the refrigerator will facilitate this process.
BWARNING: First unplug the product. Product must not be plugged in when adjusting the feet. There is the risk of electric shock!
Turn the front feet to balance the product. The corner where the foot exists is lowered when you turn in the direction of arrow and raised when you turn it in the opposite direction.
3.6 Door open warning
(This feature may vary depending on the door of the product and may not exist in some models.)
An audio warning signal will be given when the door of your product is left open for 1 minute. This warning will be muted when the door is closed or any of the display buttons (if any) are pressed.
3.5 Illumination lamp
Do not attempt to repair yourself but call the Authorised Service Agent if the LED illumination lamps do not go on or are out of order.
The lamp(s) used in this appliance is not suitable for household room illumination. The intended purpose of this lamp is to assist the user to place foodstuffs in the refrigerator/freezer in a safe and comfortable way.
|
8 /33 EN |
Refrigerator / User Manual |
|
|
|
Installation
-Upper hinge group is fixed with 3 screws.
-The hinge cover is attached after the sockets are installed.
- Then the hinge cover is fixed with two screws.
3.7 Water connection
Depending on the model of the refrigerator, you can connect it either to a demijohn or water mains. First you must connect the water hose to the refrigerator.
C In cases where a demijohn is used, a separate pump must also be used.
AWARNING: Refrigerator and the pump, if any, must be unplugged during connection.
C Following parts may not be supplied with your product since they are not required when using a demijohn.
Check that following part have been delivered together with the product:
External water filter. (If there is a demijohn connection; it is not necessary to use a water filter.)
|
9 / 33 EN |
Refrigerator / User Manual |
|
|
|
Installation
3.7.1 Before Installation
Make sure that you have everything necessary to ensure proper installation before proceeding, including:
Your product comes with an internal water filter for use inside the fridge. Part number of the filter is 4918450200 and you can use this part number
when ordering replacement filters.
3.10.1 Attaching the internal filter into the refrigerator
3.8 Connecting the water hose to the refrigerator
1. Slip the union (B) onto the water hose (A).
2. Push the water hose downwards firmly to slip it onto the water inlet valve (C).
3. Tighten the union (C) by hand to secure it onto
the water inlet valve.
C
3.9 Connecting the water line to the water supply
Connect the water line to a water supply valve. If a valve is not present or you are not sure, consult a qualified plumber.
3.10 Water filter
(in some models)
Your refrigerator may be equipped with an external or internal filter depending on its model. To fit the water filter, follow the instructions below referring to the figures supplied:
1.Pull the water filter cover slowly.
2.Remove the water filter bypass cover by turning it downwards.
|
E |
A |
C |
|
D |
|
B |
|
10 /33 EN |
Refrigerator / User Manual |
|
|
|
Installation
AWARNING: Ensure that the Ice Off mode is enabled before removing the by-pass cover.
CIt is normal that a few drops of water drip after the cover has been removed.
3.Seat the water filter cover into the mechanism and push forwards to lock it in place.
4.Press “Ice Off” button on the display again to exit this mode.
AWARNING: Ensure that the Ice Off mode is enabled before removing the by-pass cover.
CIt is normal that a few drops of water drip after the cover has been removed.
3. Seat the water filter cover into the mechanism and push forwards to lock it in place.
4. Press “Ice Off” button on the display again to
exit this mode.
C
A A
A
11 / 33 EN
Installation
3.11 Connecting the water hose to demijohn
(in some models)
To make the water supply connection between the refrigerator and the demijohn, you must use a water pump. Follow the instructions below after connecting one end of the water hose coming out of the pump to the refrigerator.
1. Complete the connection by pushing the other end of the water hose into the water hose inlet of the pump.
2. Put and fix the pump hose into the demijohn.
3. After completing the connection, plug in and run
the pump.
C
C
C
|
12 /33 EN |
Refrigerator / User Manual |
|
|
|
Loading...