Beko DUS26010W User manual

Dishwasher

User’s Manual

EN

Document Number :

15 9473 0100_AA_BEKO_45D1_MTI_EN/ 18-05-18.(15:22)

Please read this user manual first!

Dear Customer,
We hope that you get the best results from your product which has been manufactured
with high quality and state-of-the-art technology. Therefore, please read this entire user
manual and all other accompanying documents carefully before using the product and
keep it as a reference for future use. If you handover the product to someone else, give
the user manual as well. Follow all warnings and information in the user manual.
Remember that this user manual is also applicable for several other models. Differences
between models will be identified in the manual.

Explanation of symbols

Throughout this User Manual the following symbols are used:

Important information or useful

C

A

hints about usage.

Warning for hazardous situations
with regard to life and property.

Warning for electric shock.

B

Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations.

Do not dispose of the packaging materials together with the domestic or other wastes.
Take them to the packaging material collection points designated by the local authorities.

This product was manufactured using the latest technology in environmentally friendly conditions.

Dishwasher

User’s Manual

EN

Document Number :

15 9473 0100_AA_BEKO_45D1_MTI_EN/ 18-05-18.(15:22)

Please read this user manual first!

Dear Customer,
We hope that you get the best results from your product which has been manufactured
with high quality and state-of-the-art technology. Therefore, please read this entire user
manual and all other accompanying documents carefully before using the product and
keep it as a reference for future use. If you handover the product to someone else, give
the user manual as well. Follow all warnings and information in the user manual.
Remember that this user manual is also applicable for several other models. Differences
between models will be identified in the manual.

Explanation of symbols

Throughout this User Manual the following symbols are used:

Important information or useful

C

A

hints about usage.

Warning for hazardous situations
with regard to life and property.

Warning for electric shock.

B

Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations.

Do not dispose of the packaging materials together with the domestic or other wastes.
Take them to the packaging material collection points designated by the local authorities.

This product was manufactured using the latest technology in environmentally friendly conditions.

CONTENTS

1 INSTRUCTIONS FOR SAFETY
AND ENVIRONMENT 4

General safety .......................................4

Intended use ..........................................4

Children’s safety ....................................5

Disposing of packaging material ........5

Transportation of the product ............5

Compliance with WEEE Directive and

Disposing of the Waste Product .........6

Compliance with RoHS Directive ........6

Package information ............................6

2 DISHWASHER 7

Overview ................................................7

Fan drying system .................................8

Technical specications .......................8

3 INSTALLATION 9

Appropriate installation location .......9

Connecting water supply .....................9

Connection to the drain .................... 10

Adjusting the feet .............................. 10

Aquasafe+ ...........................................11

Electrical connection ..........................11

Initial use ..............................................11

4 PREPARATION 12

Tips for energy saving ........................12

Water softening system ....................12

Adjusting the water softening

system ..................................................12

Adding salt ...........................................14

Detergent .............................................15

Tablet detergents ...............................16

Rinse aid ...............................................17

Items not suitable for washing in the

dishwasher .......................................... 18

Placing the dishes into the

dishwasher .......................................... 18

Cutlery basket .................................... 20

Collapsible lower basket tines ......... 20

Collapsible lower basket tines ..........21

Lower basket bottle wire ...................21

Collapsible upper basket wires ........ 22

Upper basket multipurpose service

rack ....................................................... 22

Adjusting the height of the upper

basket .................................................. 23

Upper basket height adjustable rack 24

Ceiling cutlery basket ........................ 24

5 OPERATING THE PRODUCT 25

Keys ...................................................... 26

Preparing the machine...................... 26

Programme selection ........................ 26

Auxiliary functions ............................ 28

Programming the washing time ...... 29

Cancelling the programme ................31

Adjusting the amount of rinse aid ....31

InnerClean ........................................... 32

End of programme ............................. 32

Overowing warning ......................... 32

6 MAINTENANCE AND
CLEANING 33

Cleaning the outer surface of the

product ................................................ 33

Cleaning the interior of the machine 33

Cleaning the lters ............................ 33

Cleaning the hose lter ..................... 34

Cleaning the impellers ...................... 35

Lower impeller .................................... 35

Upper impeller ................................... 35

7 TROUBLESHOOTING 36

8 INSTALLATION MANUAL 42

instructions for safety and environment

1

This section contains safety
instructions that will help to get
protected from risk of personal
injury or property damage. Failure
to follow these instructions shall
void all warranties.

General safety

• Never place the product
on a carpet-covered floor;
otherwise, lack of airflow
beneath the product will
cause electrical parts to
overheat. This will cause
problems with your product.

• Do not operate the product
if the power cable / plug is
damaged! Call the Authorised
Service Agent.

• Connect the product to a
grounded outlet protected
by a fuse complying with
the values in the “Technical
specifications” table. Do
not neglect to have the
grounding installation made
by a qualified electrician.
Our company shall not be
liable for any damages that
will arise when the product
is used without grounding
in accordance with the local
regulations.

• The water supply and
draining hoses must be
securely fastened and remain
undamaged.

• Unplug the product when not
in use.

• Never wash the product by
spreading or pouring water
onto it! There is the risk of
electric shock!

• Never touch the plug with
wet hands! Never unplug by
pulling on the cable, always
pull out by grabbing the plug.

• The product must be
unplugged during installation,
maintenance, cleaning and
repairing procedures.

• Always have the installation
and repairing procedures
carried out by the Authorised
Service Agent. Manufacturer
shall not be held liable for
damages that may arise from
procedures carried out by
unauthorised persons.

• Never use chemical solvents
in the product. They bring
forth the risk of explosion.

• When you pull the upper and
lower baskets out completely,
the door of the product will
bear all the weight of the
baskets. Do not put other
loads on the door; otherwise,
the product may tilt.

• Never leave the door of
the product open apart
from loading and unloading
procedures.

• Do not to open the door of
the product when it is running
unless necessary. Be careful
for the rush of hot vapour
when you need to open the
door.

Intended use

• This product has been
designed for domestic use.

• It must be used to do the
domestic type dishes only.

4 Dishwasher / User’s Manual/53 EN

instructions for safety and environment

• This appliance is intended
to be used in household and
similar applications such as:

- Staff kitchen areas in shops,
offices and other working
environments;

- Farm houses;

- By clients in hotels, motels
and other residential type
environments;

- Bed and breakfast type
environments

• Only dishwasher safe
detergents, rinse aids and
additives must be used.

• The manufacturer waives
any responsibility arisen
from incorrect usage or
transportation.

• The service life of your
product is 10 years. During
this period, original spare
parts will be available to
operate the product properly.

• This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical,sensory
or mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Children
shall not play with the
appliance. Cleaning and user
maintenance shall not be
made by children without
supervision.

Chldren’s safety

• Electrical products are
dangerous for the children.
Keep children away from the
product when it is in use. Do
not let them to tamper with
the product.

• Do not forget to close the door
of the product when leaving
the room where it is located.

• Store all detergents and
additives in a safe place away
from the reach of the children.

Dsposng of
packagng materal

Packaging materials are
dangerous to children. Keep
packaging materials in a safe place
away from reach of the children.
Packaging materials of the
product are manufactured from
recyclable materials. Dispose
of them properly and sort in
accordance with recycled waste
instructions. Do not dispose
of them with normal domestic
waste.

Transportaton of the
product

If you need to move the

A

product, do it in upright
position and hold from
the rear side. Slanting
the product onto its
front side may cause the
electronic parts in it get
wet and damaged.

Dishwasher / User’s Manual

5 / 53

EN

instructions for safety and environment

1. Unplug the product before
transporting it.

2. Remove water drainage and
water supply connections.

3. Drain the remaining water in
the product completely.

Complance wth
WEEE Drectve and
Dsposng of the
Waste Product

This product complies with
EU WEEE Directive
(2012/19/EU). This product

bears a classification symbol
for waste electrical and electronic
equipment (WEEE).This product
has been manufactured with high
quality parts and materials which
can be reused and are suitable for
recycling. Do not dispose of the
waste product with normal
domestic and other wastes at the
end of its service life. Take it to the
collection center for the recycling
of electrical and electronic
equipment. Please consult your
local authorities to learn about
these collection centers.

Package nformaton

Packaging materials of the
product are manufactured from
recyclable materials in accordance
with our National Environment
Regulations. Do not dispose
of the packaging materials
together with the domestic or
other wastes. Take them to the
packaging material collection
points designated by the local
authorities.

Complance wth RoHS
Drectve

The product you have purchased
complies with EU RoHS Directive
(2011/65/EU). It does not contain
harmful and prohibited materials
specified in the Directive.

6 Dishwasher / User’s Manual/53 EN

2

Dishwasher

Overvew

15

Dishwasher / User’s Manual

1. Upper basket

2. Upper impeller

3. Lower impeller

4. Silverware basket

5. Door

6. Rating Label

7. Control panel

8. Detergent dispenser

9. Lower basket

10. Filters

11. Salt reservoir lid

12. Upper basket rail

13. Upper cutlery basket (depends on model)

14. Tabletop (depends on model)

15. Fan drying system (depends on model)

EN

7 / 53

Dishwasher

Techncal specfcatons

Compliance to standards and test data / EC declaration of conformity

This product complies with the following EU directives;

Development, production and sales stages of this product comply with the safety
rules included in all pertaining European Community regulations.
2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242

Power input 220-240 V, 50 Hz (see rating label)

Total power consumption 1800-2100 W (see rating label)

Heater power consumption 1800 W (see rating label)

Total current (depends on the model) 10 A (see rating label)

Drain pump power consumption 30 W (see rating label)

Water pressure 0.3 –10 bar (= 3 – 100 N/cm² = 0.01-1.0

Mpa)

Technical specifications may be changed without prior notice to improve the

C

quality of the product.

Figures in this manual are schematic and may not match the product exactly.

C

Values stated on the markings of the product or in the printed documents

C

Fan dryng system

(depends on model)
Fan drying system ensures efficient drying of your dishes.
It is normal to hear a different sound than that of washing cycle during fan operation.

Note for test institutions:

Data required for performance tests shall be provided upon request. Requests can be
e-mailed to the following address:

[e-mail]

Do not forget to provide the code, stock and serial numbers of the product to be tested in
your request e-mail along with your contact information. Code, stock and serial numbers of
the product may be found on the type label attached to the side wall of the door.

8 Dishwasher / User’s Manual/53 EN

accompanying the product are obtained in the laboratory on basis of the relevant
standards. Depending on operational and environmental conditions of the
product, these values may vary.

3

Installation

Refer to the nearest Authorised Service
Agent for installation of your product. To
make the product ready for use, make sure
that the electricity, tap water supply and
water drainage systems are appropriate
before calling the Authorised Service Agent.
If they are not, call a qualified technician
and plumber to have any necessary
arrangements carried out.

Preparation of the location

C

B

A

and electrical, tap water and
waste water installations at the
place of installation is under
customer's responsibility.

Installation and electrical
connections must be carried
out by the Authorised Service
Agent. Manufacturer shall not
be held responsible for damages
arising from processes carried
out by unauthorised persons.

Prior to installation, visually
check if the product has any
defects on it. If so, do not have
it installed. Damaged products
cause risks for your safety.

Approprate nstallaton
locaton

• Place the product on a solid and flat
floor that has sufficient load carrying
capacity! The product must be installed
on a flat surface in order for the door to
be closed comfortably and securely.

• Do not install the product at places
where temperature may fall below 0ºC.

• Place the product at least 1 cm away
from the edges of other furniture.

• Place the product on a rigid floor. Do
not place it on a long pile rug or similar
surfaces.

Do not place the product on the

B

• Make sure that you select a location

• Install the product in a place close to

power cable.

that will allow you to load and unload
the dishes in a fast and comfortable
manner.

the tap and the drain hole. Select the
installation location by considering
that it will not be changed after the
connections are made.

Make sure that the water inlet

C

When placing the product, pay attention not
to damage the floor, walls, piping, etc. Do not
hold the product from its door or panel to
move it.

Dishwasher / User’s Manual

and discharge hoses are not
folded, pinched or crushed
while pushing the product into
its place after installation or
cleaning procedures.

Connectng water supply

We recommend attaching a

C

filter on the house/apartment
supply water inlet to protect the
machine from damages that
may arise from impurities (sand,
dirt, rust, etc.) coming from the
urban water supply system or
from your own water system as
well as to prevent complaints
such as yellowing or sludge
accumulation at the end of
washing.

9 / 53

EN

Installation

min

300

min

120

max 1000

min 500

Permitted water temperature: up
to 25°C

The dishwasher may not be connected to
open warm water devices or flow-through
water heaters.

• Do not use old or used water inlet hose
on the new product. Use the new water
inlet hose supplied with the product.

• Connect the water inlet hose directly
to the water tap. Pressure coming from
the tap should be minimum 0.3 and
maximum 10 bars. If the water pressure
exceeds 10 bars, a pressure relief valve
should be installed in between.

• Open the taps completely after making
the connections to check for water
leaks.

Use a screw-on hose connector

C

to connect the water inlet hose
to a water tap with a ¾ inch
external thread. If required, use
a filter insert to filter deposits
from the pipes.

Attach the water discharge hose to the
drainpipe without bending it. Tightly fix the
water discharge hose to the drainpipe in
order to prevent any dislocation of the water
discharge hose during operation of the
product.

Drainpipe must be connected

C

to the sewage system and it
should not be connected to any
surface water.

For your safety, close the water

A

inlet tap completely after the
washing programme is over.

Connecton to the dran

Water discharge hose can directly be
connected to the drain hole or sink’s
drainage. The length of this connection must
be min. 50 cm and max. 100 cm from the
floor. A discharge hose longer than 4 meters
causes dirty washing.

10 Dishwasher / User’s Manual/53 EN

Adjustng the feet

If the door of the product cannot be closed
properly or if the product swings when you
push it slightly, then you need to adjust
the feet of the product. Adjust the feet of
the product as illustrated in the installation
manual supplied with the product.

Diswashers door must be

A

aligned properly otherwise hot
steam can escape! Danger of
serious burns, other injury or
may damage furniture.

Installation

Aquasafe+

(depends on model)
The Aquasafe+ system protects against
water leaks that may occur at the hose inlet.
Water contact with the valve box of the
system must be avoided to prevent damage
to the electrical system. If the Aquasafe+
system is damaged, unplug the product and
call the Authorised Service Agent.

As the hose set contains

A

electrical connections and
assemblies, never shorten
or lengthen the hose with
extension hoses.

• The voltage and allowed fuse or
breaker protection are specified in the
“Technical specifications” section. If the
current value of the fuse or breaker in
the house is less than 16 Amps, have
a qualified electrician install a 16 Amp
fuse.

• The specified voltage must be equal to
your mains voltage.

• Do not make connections via extension
cables or multi-plugs.

Damaged power cables must

B
B

B

be replaced by the Authorised
Service Agent.

If your dishwasher is equipped
with internal illumination, lamp
should only be replaced by the
Authorised Service Agent in case
of failures that may occur on the
lamp.

If the product has a failure, it
should not be operated unless
it is repaired by the Authorised
Service Agent! There is the risk
of electric shock!

Electrcal connecton

Connect the product to a grounded outlet
protected by a fuse complying with the
values in the “Technical specifications”
table. Our company shall not be liable for any
damages that will arise when the product is
used without grounding in accordance with
the local regulations.

• Connection must comply with national
regulations.

• Power cable plug must be within easy
reach after installation.

Unplug the product after the

B

Dishwasher / User’s Manual

washing programme is over.

Intal use

Before starting to use the product, make
sure that all preparations are made in
accordance with the instructions in sections
“Important safety instructions” and
“Installation”.

• To prepare the product to do the
dishes, perform first operation in the
shortest programme with detergent
while the machine is empty. During the
initial use, fill the salt reservoir with 1
litre of water prior to filling it with salt.

There might be a small amount

A

of water left in the product after
factory quality control tests. This
has no harm on the product.

EN

11 / 53

Preparation

4

Tps for energy savng

Following information will help you use the
product in an ecological and energy-efficient
manner.
Wipe away any coarse food remnants on the
dishes before putting them in the product.
Operate the product after filling it
completely.
When selecting a programme, consider
the table of "Programme data and average
consumption values".
Do not put more detergent than suggested
on the detergent package.

Water softenng system

The product is equipped with a water
softening system which reduces the
hardness of incoming water. This system
softens the supply water to a level that will
allow washing the dishes with the required
quality.

The mains water hardness must

C

be softened if it is over 7°dH.
Otherwise, hardness ions will
accumulate on the dishes that
are washed and may affect the
washing, rinsing and drying
performances of the machine.

Adjustng the water
softenng system

Cleaning, rinsing and drying performance of
your dishwasher will increase when water
softening system is adjusted properly.
Adjust the new water hardness level
according to the Water hardness level
instruction in this booklet.
Use the test strip supplied with the product
according to the steps given below to
determine hardness level of your supply
water.

12 Dishwasher / User’s Manual/53 EN

Preparation

Remove the test
strip from the
packet.

Turn on the tap and
let the water run for
about a minute.

Hold the test strip in
the water for about
a second.

Remove the test
strip from the water
and shake it.

Wait for 1 minute. The test strip shows

you the hardness
level.

After determining hardness level of the supply water:

1. Turn on the machine, press Time Delay and P+/P keys simultaneously. After the countdown
(3,2,1) is displayed keep the keys pressed for a while.

2. Press P+/P key to activate the (r..) position.

3. Using Time Delay key, adjust water hardness level according to the hardness of the supply
water. See “Water hardness level adjustment table” for correct setting.

4. Press On / Off key to save the setting.

Water hardness level adjustment table

Hardness
Level

0th Level

1st Level

2nd Level

3rd Level

4th Level

5th Level

English Water
Hardness °dE

0-5 0-4 0-8

6-9 5-7 9-13

10-15 8-12 14-22

16-19 13-15 23-27

20-24 16-19 28-34

25-62 20-50 35-90

German Water
Hardness °dH

French Water
Hardness °dF

Water Hardness Level Indicator

Press the Time Delay key to switch the water hardness level
to position 1. (r1)

Press the Time Delay key to switch the water hardness level
to position 2. (r2)

Press the Time Delay key to switch the water hardness level
to position 3. (r3)

Press the Time Delay key to switch the water hardness level
to position 4. (r4)

Press the Time Delay key to switch the water hardness level
to position 5. (r5)

In order to protect your glassware against glass corrosion in an optimal way, you have to perform
the same hardness settings, which you have made in the control panel, with the regeneration
setting switch.
For example, if you have adjusted to “3rd level” in the control panel, also set the regeneration
adjustment switch to 3rd level.

Regeneration Adjustment Switch

0th Level 1st Level 2nd Level 3rd Level 4th Level 5th Level

1 1 2 3 4 5

Dishwasher / User’s Manual

13 / 53

EN

Preparation

If the hardness level of the supply water
is above 90 °dF or if you are using well
water, then it is recommended to use water
purification devices and special filters.
If the hardness level of the supply water is
below 13°dF, there is no need to use salt
in your dishwasher. If this is the case, “No
Salt Warning Indicator” (if any) illuminates
continuously on the panel of your machine.
If the water hardness level adjustment is set
to level 1, the “No salt warning indicator” will
illuminate continuously although it is not
necessary to use salt. If you use salt under
this condition, salt will not be consumed and
the Salt indicator will not illuminate.

If you move your house, it is

C

necessary to readjust water
hardness level of your machine
by considering the information
given above according to the
hardness level of the supply
water in your new location.
Your machine will display the
most recently adjusted water
hardness level.

It is recommended to use

C

C

1. Firstly, take the lower basket out to add

2. Turn the salt reservoir lid counter-

granule- or powder-formed
softening salts in the water
softening system. Do not use
salts that do not completely
dissolve in water such as table
salt or rock salt. Otherwise the
performance of the system may
deteriorate in time.

Salt reservoir will be filled with
water when you start the
product. For this reason, add salt
before operating the machine.

softening salt.

clockwise to open it (A).

Addng salt

Water softening system needs to be
regenerated in order for the product
operates with the same performance
continuously. Dishwasher salt is used for
this purpose.

Use only special softening salts

C

14 Dishwasher / User’s Manual/53 EN

produced particularly for the
dishwashers in your machine.

3. Add 1 litre of water to salt reservoir of
your machine only in initial use.

4. Fill the salt reservoir with salt by
using the salt funnel (D). To speed up
dissolution rate of salt in water, stir it
with a spoon.

Preparation

You can put about 2 kg of
softening salt into the salt

C

5. Replace the lid and tighten it when the

C

C

Detergent

You can use powder, liquid/gel or tablet
detergents in the machine.

A

reservoir.

reservoir is full.

You need to add salt right before
starting the machine. Thus, the
overflowing salty water will be
flushed immediately, preventing
the risk of corrosion in machine.
In cases where you would not
start washing immediately,
run your machine empty in the
shortest program.

Since different salt brands
in the market have different
particle sizes and since the water
hardness may vary, dissolution
of the salt in water may take
a couple of hours. Therefore,
Salt Indicator remains on for a
while after adding salt into the
machine.

Only use in the machine the
detergents produced particularly
for use with dishwashers. We
recommend you not to use
detergents that contain chlorine
and phosphate as they are
harmful for the environment.

Adding detergent

Pay attention to the warnings

C

A

Put the detergent into the detergent
dispenser just before operating the machine
as illustrated below.

1. Push the latch to right to open the

2. Put suggested amount of powder,

C

on the detergent packaging
to get better washing and
drying results. Contact the
manufacturer of the detergent
for further questions.

Do not put solvents into the
detergent dispenser. There is
the risk of explosion!

detergent dispenser lid (A).

liquid/gel or tablet detergent in the
reservoir.

Inside the detergent dispenser
there are level markings that
help you use appropriate amount
of powder detergent. When
brimful, detergent dispenser will
contain 45 cm³ of detergent.
Fill detergent up to 15 cm³ or 25
cm³ level marks in the detergent
dispenser according to fullness
of the machine and/or soiling
degree of the dishes. One
tablet is enough if you are using
detergent tablets.

Dishwasher / User’s Manual

15 / 53

EN