Beko DUN28520W User manual
DISHWASHER
USER INSTRUCTIONS
GNU 4S832
GNU 4S832 X
GNU 4E836
GNU 4E836 X
ENG
www.grundig.com
DISHWASHER
USER INSTRUCTIONS
GNU 4S832
GNU 4S832 X
GNU 4E836
GNU 4E836 X
ENG
Please read this user manual first!
Dear Customer,
Thank you for preferring a Grundig product. We hope that you get the best results
from your product which has been manufactured with high quality and state-of-the-art
technology. Therefore, please read this entire user manual and all other accompanying
documents carefully before using the product and keep it as a reference for future use.
If you handover the product to someone else, give the user manual as well. Follow all
warnings and information in the user manual.
Remember that this user manual is also applicable for several other models. Differences
between models will be identified in the manual.
Explanation of symbols
Throughout this User Manual the following symbols are used:
Important information or useful
C
A
hints about usage.
Warning for hazardous situations
with regard to life and property.
Warning for electric shock.
B
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other wastes.
Take them to the packaging material collection points designated by the local authorities.
CONTENTS
1 INSTRUCTIONS FOR SAFETY
AND ENVIRONMENT 4
General safety ............................................... 4
Intended use ................................................... 4
Children’s safety ............................................ 5
Disposing of packaging material .................5
Transportation of the product .......................5
Compliance with WEEE Directive and
Disposing of the Waste Product ...................6
Compliance with RoHS Directive .................6
Package information ......................................6
2 DISHWASHER 7
Overview ........................................................ 7
Fan drying system .......................................... 8
Technical specifications ................................. 8
3 INSTALLATION 9
Appropriate installation location .................. 9
Connecting water supply .............................. 9
WaterProtect+ .............................................10
Connection to the drain ..............................10
Adjusting the feet ......................................... 11
Electrical connection ................................... 11
Initial use ....................................................... 11
4 PREPARATION 12
Tips for energy saving ................................. 12
Water softening system ............................... 12
Adjusting the water softening system .........12
Adding salt ...................................................14
Detergent ...................................................... 15
Tablet detergents .........................................16
Rinse aid .......................................................17
Items not suitable for washing in the
dishwasher ...................................................18
Placing the dishes into the dishwasher ......18
Collapsible upper basket wires ..................20
Lower basket bottle wire .............................20
Upper basket height adjustable rack .........20
Cutlery basket .............................................20
Adjusting the height of the upper basket ... 21
Collapsible lower basket tines ....................22
Tray Wash Supports ....................................22
Ceiling cutlery basket ..................................23
5 OPERATING THE
PRODUCT 24
Keys ...............................................................25
Preparing the machine ................................25
Programme selection ...................................25
Auxiliary functions .......................................27
Programming the washing time ..................28
Starting the programme ..............................29
Programme step follow-up ..........................29
Child (Key) Lock ...........................................30
Cancelling the programme .........................30
Salt ( ) indicator .......................................30
Rinse Aid ( ) indicator ...............................30
Water Cut-off indicator ( ) ..................... 31
End of programme ....................................... 31
Adjusting the amount of rinse aid............... 31
SelfCare ........................................................ 31
6 MAINTENANCE AND
CLEANING 32
Cleaning the outer surface of the product 32
Cleaning the interior of the machine..........32
Cleaning the filters .......................................32
Cleaning the hose filter ...............................33
Cleaning the impellers.................................34
Lower impeller ..............................................34
Upper impeller ............................................34
7 TROUBLESHOOTING 35
INSTRUCTIONS FOR SAFETY AND ENVIRONMENT
1
This section contains safety
instructions that will help to get
protected from risk of personal
injury or property damage. Failure
to follow these instructions shall
void all warranties.
General safety
• Never place the product
on a carpet-covered floor;
otherwise, lack of airflow
beneath the product will cause
electrical parts to overheat.
This will cause problems with
your product.
• Do not operate the product
if the power cable / plug is
damaged! Call the Authorised
Service Agent.
• Connect the product to a
grounded outlet protected
by a fuse complying with
the values in the “Technical
specifications” table. Do
not neglect to have the
grounding installation made
by a qualified electrician.
Our company shall not be
liable for any damages that
will arise when the product
is used without grounding in
accordance with the local
regulations.
• The water supply and
draining hoses must be
securely fastened and remain
undamaged.
• Unplug the product when not
in use.
• Never wash the product by
spreading or pouring water
onto it! There is the risk of
electric shock!
• Never touch the plug with
wet hands! Never unplug by
pulling on the cable, always
pull out by grabbing the plug.
• The product must be
unplugged during installation,
maintenance, cleaning and
repairing procedures.
• Always have the installation
and repairing procedures
carried out by the Authorised
Service Agent. Manufacturer
shall not be held liable for
damages that may arise from
procedures carried out by
unauthorised persons.
• Never use chemical solvents in
the product. They bring forth
the risk of explosion.
• When you pull the upper and
lower baskets out completely,
the door of the product will
bear all the weight of the
baskets. Do not put other
loads on the door; otherwise,
the product may tilt.
• Never leave the door of the
product open apart from
loading and unloading
procedures.
• Do not to open the door of
the product when it is running
unless necessary. Be careful
for the rush of hot vapour
when you need to open the
door.
Intended use
• This product has been
designed for domestic use.
• It must be used to do the
domestic type dishes only.
4
/53 EN
DISHWASHER / USER INSTRUCTIONS
instructions for safety and environment
• This appliance is intended
to be used in household and
similar applications such as:
- Staff kitchen areas in shops,
offices and other working
environments;
- Farm houses;
- By clients in hotels, motels
and other residential type
environments;
- Bed and breakfast type
environments
• Only dishwasher safe
detergents, rinse aids and
additives must be used.
• The manufacturer waives
any responsibility arisen
from incorrect usage or
transportation.
• The service life of your product
is 10 years. During this period,
original spare parts will be
available to operate the
product properly.
• This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical,sensory
or mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Children
shall not play with the
appliance. Cleaning and
user maintenance shall not
be made by children without
supervision.
Children’s safety
• Electrical products are
dangerous for the children.
Keep children away from the
product when it is in use. Do
not let them to tamper with the
product.
• Do not forget to close the door
of the product when leaving
the room where it is located.
• Store all detergents and
additives in a safe place away
from the reach of the children.
Disposing of packaging
material
Packaging materials are
dangerous to children. Keep
packaging materials in a safe
place away from reach of the
children.
Packaging materials of the product
are manufactured from recyclable
materials. Dispose of them
properly and sort in accordance
with recycled waste instructions.
Do not dispose of them with
normal domestic waste.
Transportation of the
product
If you need to move the
A
product, do it in upright
position and hold from
the rear side. Slanting
the product onto its front
side may cause the
electronic parts in it get
wet and damaged.
DISHWASHER / USER INSTRUCTIONS
5 / 53
EN
instructions for safety and environment
1. Unplug the product before
transporting it.
2. Remove water drainage and
water supply connections.
3. Drain the remaining water in
the product completely.
Compliance with WEEE
Directive and Disposing
of the Waste Product
This product complies with
EU WEEE Directive
(2012/19/EU). This product
bears a classification symbol
for waste electrical and electronic
equipment (WEEE).This product
has been manufactured with high
quality parts and materials which
can be reused and are suitable for
recycling. Do not dispose of the
waste product with normal
domestic and other wastes at the
end of its service life. Take it to the
collection center for the recycling
of electrical and electronic
equipment. Please consult your
local authorities to learn about
these collection centers.
National Environment Regulations.
Do not dispose of the packaging
materials together with the
domestic or other wastes. Take
them to the packaging material
collection points designated by the
local authorities.
Compliance with RoHS
Directive
The product you have purchased
complies with EU RoHS Directive
(2011/65/EU). It does not
contain harmful and prohibited
materials specified in the Directive.
Package information
Packaging materials of the product
are manufactured from recyclable
materials in accordance with our
6
/53 EN
DISHWASHER / USER INSTRUCTIONS
2
DISHWASHER
Overview
15
DISHWASHER / USER INSTRUCTIONS
1. Upper basket
2. Upper impeller
3. Lower impeller
4. Silverware basket
5. Door
6. Rating Label
7. Control panel
8. Detergent dispenser
9. Lower basket
10. Filters
11. Salt reservoir lid
12. Upper basket rail
13. Upper cutlery basket (depends on model)
14. Tabletop (depends on model)
15. Fan drying system (depends on model)
7 / 53
EN
Dishwasher
Technical specifications
Compliance to standards and test data / EC declaration of conformity
This product complies with the following EU directives;
Development, production and sales stages of this product comply with the safety
rules included in all pertaining European Community regulations.
2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242
Power input 220-240 V, 50 Hz (see rating label)
Total power consumption 1800-2100 W (see rating label)
Heater power consumption 1800 W (see rating label)
Total current (depends on the model) 10 A (see rating label)
Drain pump power consumption 30 W (see rating label)
Water pressure 0.3 –10 bar (= 3 – 100 N/cm² = 0.01-1.0
Mpa)
Technical specifications may be changed without prior notice to improve the
C
quality of the product.
Figures in this manual are schematic and may not match the product exactly.
C
Values stated on the markings of the product or in the printed documents
C
Fan drying system
Fan drying system ensures efficient drying of your dishes.
It is normal to hear a different sound than that of washing cycle during fan operation.
Note for test institutions:
Data required for performance tests shall be provided upon request. Requests can be
e-mailed to the following address:
dishwasher@standardloading.com
Do not forget to provide the code, stock and serial numbers of the product to be tested in your
request e-mail along with your contact information. Code, stock and serial numbers of the
product may be found on the type label attached to the side wall of the door.
8
/53 EN
accompanying the product are obtained in the laboratory on basis of the relevant
standards. Depending on operational and environmental conditions of the
product, these values may vary.
DISHWASHER / USER INSTRUCTIONS
3
INSTALLATION
Refer to the nearest Authorised Service
Agent for installation of your product. To
make the product ready for use, make sure
that the electricity, tap water supply and
water drainage systems are appropriate
before calling the Authorised Service Agent.
If they are not, call a qualified technician
and plumber to have any necessary
arrangements carried out.
Preparation of the location and
C
B
A
C
When placing the product, pay attention not
to damage the floor, walls, piping, etc. Do
not hold the product from its door or panel
to move it.
electrical, tap water and waste
water installations at the place
of installation is under customer's
responsibility.
Installation and electrical
connections must be carried out
by the Authorised Service Agent.
Manufacturer shall not be held
responsible for damages arising
from processes carried out by
unauthorised persons.
Prior to installation, visually
check if the product has any
defects on it. If so, do not have
it installed. Damaged products
cause risks for your safety.
Make sure that the water inlet
and discharge hoses are not
folded, pinched or crushed
while pushing the product into
its place after installation or
cleaning procedures.
Appropriate installation
location
• Place the product on a solid and flat
floor that has sufficient load carrying
capacity! The product must be installed
on a flat surface in order for the door to
be closed comfortably and securely.
• Do not install the product at places
where temperature may fall below 0ºC.
• Place the product at least 1 cm away
from the edges of other furniture.
• Place the product on a rigid floor. Do
not place it on a long pile rug or similar
surfaces.
Do not place the product on the
B
• Make sure that you select a location
• Install the product in a place close to
power cable.
that will allow you to load and unload
the dishes in a fast and comfortable
manner.
the tap and the drain hole. Select the
installation location by considering
that it will not be changed after the
connections are made.
Connecting water supply
We recommend attaching a
C
Permitted water temperature: up to
25°C
The dishwasher may not be connected to
open warm water devices or flow-through
water heaters.
filter on the house/apartment
supply water inlet to protect the
machine from damages that
may arise from impurities (sand,
dirt, rust, etc.) coming from the
urban water supply system or
from your own water system as
well as to prevent complaints
such as yellowing or sludge
accumulation at the end of
washing.
DISHWASHER / USER INSTRUCTIONS
9 / 53
EN
Installation
min
300
min
120
max 1000
min 500
• Do not use old or used water inlet hose
on the new product. Use the new water
inlet hose supplied with the product.
• Connect the water inlet hose directly
to the water tap. Pressure coming from
the tap should be minimum 0.3 and
maximum 10 bars. If the water pressure
exceeds 10 bars, a pressure relief valve
should be installed in between.
• Open the taps completely after making
the connections to check for water
leaks.
Use a screw-on hose connector
C
A
to connect the water inlet hose
to a water tap with a ¾ inch
external thread. If required, use
a filter insert to filter deposits
from the pipes.
For your safety, close the water
inlet tap completely after the
washing programme is over.
WaterProtect+
The WaterProtect+ system protects against
water leaks that may occur at the hose inlet.
Water contact with the valve box of the
system must be avoided to prevent damage
to the electrical system. If the WaterProtect+
system is damaged, unplug the product and
call the Authorised Service Agent.
As the hose set contains
A
electrical connections and
assemblies, never shorten or
lengthen the hose with extension
hoses.
Connection to the drain
Water discharge hose can directly be
connected to the drain hole or sink’s
drainage. The length of this connection must
be min. 50 cm and max. 100 cm from the
floor. A discharge hose longer than 4 meters
causes dirty washing.
Attach the water discharge hose to the
drainpipe without bending it. Tightly fix the
water discharge hose to the drainpipe in
order to prevent any dislocation of the water
discharge hose during operation of the
product.
10
/53 EN
DISHWASHER / USER INSTRUCTIONS
Installation
Drainpipe must be connected to
C
Adjusting the feet
If the door of the product cannot be closed
properly or if the product swings when
you push it slightly, then you need to adjust
the feet of the product. Adjust the feet of
the product as illustrated in the installation
manual supplied with the product.
Electrical connection
Connect the product to a grounded outlet
protected by a fuse complying with the
values in the “Technical specifications” table.
Our company shall not be liable for any
damages that will arise when the product is
used without grounding in accordance with
the local regulations.
• Connection must comply with national
• Power cable plug must be within easy
B
• The voltage and allowed fuse or
• The specified voltage must be equal to
• Do not make connections via extension
the sewage system and it should
not be connected to any surface
water.
regulations.
reach after installation.
Unplug the product after the
washing programme is over.
breaker protection are specified in the
“Technical specifications” section. If the
current value of the fuse or breaker in
the house is less than 16 Amps, have a
qualified electrician install a 16 Amp
fuse.
your mains voltage.
cables or multi-plugs.
Damaged power cables must
B
B
B
Initial use
Before starting to use the product, make
sure that all preparations are made
in accordance with the instructions in
sections “Important safety instructions” and
“Installation”.
• To prepare the product to do the dishes,
A
be replaced by the Authorised
Service Agent.
If your dishwasher is equipped
with internal illumination, lamp
should only be replaced by the
Authorised Service Agent in case
of failures that may occur on the
lamp.
If the product has a failure, it
should not be operated unless
it is repaired by the Authorised
Service Agent! There is the risk
of electric shock!
perform first operation in the shortest
programme with detergent while the
machine is empty. During the initial use,
fill the salt reservoir with 1 litre of water
prior to filling it with salt.
There might be a small amount
of water left in the product after
factory quality control tests. This
has no harm on the product.
DISHWASHER / USER INSTRUCTIONS
11 / 53
EN
4
PREPARATION
Tips for energy saving
Following information will help you use the
product in an ecological and energy-efficient
manner.
Wipe away any coarse food remnants on
the dishes before putting them in the product.
Operate the product after filling it
completely.
When selecting a programme, consider
the table of "Programme data and average
consumption values".
Do not put more detergent than suggested
on the detergent package.
Water softening system
The product is equipped with a water
softening system which reduces the hardness
of incoming water. This system softens
the supply water to a level that will allow
washing the dishes with the required quality.
The mains water hardness must
C
be softened if it is over 7°dH.
Otherwise, hardness ions will
accumulate on the dishes that
are washed and may affect the
washing, rinsing and drying
performances of the machine.
Adjusting the water softening
system
Cleaning, rinsing and drying performance
of your dishwasher will increase when water
softening system is adjusted properly.
Adjust the new water hardness level
according to the Water hardness level
instruction in this booklet.
Use the test strip supplied with the product
according to the steps given below to
determine hardness level of your supply
water.
12
/53 EN
DISHWASHER / USER INSTRUCTIONS
Preparation
a b
Remove the test
strip from the
packet.
1 min.
Turn on the tap and
let the water run for
about a minute.
c
1 Second
Hold the test strip in
the water for about
a second.
d e f
1 Minute
Remove the test
strip from the water
and shake it.
Wait for 1 minute. The test strip shows
you the hardness
level.
After determining hardness level of the supply water:
1. Press and hold the settings key after switching on your machine. Settings menu is opened at
the end of the 3, 2, 1 countdown on the display.
2. Go to the (r..) position on the display by pressing the programme key.
3. Using the time delay key, adjust the water hardness level according to the hardness of your
supply water. See “Water hardness level adjustment table” for correct setting.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness
Level
0th Level
1st Level
2nd Level
3rd Level
4th Level
5th Level
English Water
Hardness °dE
0-5 0-4 0-8
6-9 5-7 9-13
10-15 8-12 14-22
16-19 13-15 23-27
20-24 16-19 28-34
25-62 20-50 35-90
German Water
Hardness °dH
French Water
Hardness °dF
Water Hardness Level Indicator
Press the Time Delay key to switch the water hardness
level to position 1. (r1)
Press the Time Delay key to switch the water hardness
level to position 2. (r2)
Press the Time Delay key to switch the water hardness
level to position 3. (r3)
Press the Time Delay key to switch the water hardness
level to position 4. (r4)
Press the Time Delay key to switch the water hardness
level to position 5. (r5)
Perform the same hardness level adjustment that you have set on the control panel also with the
regeneration adjustment switch. For example, if you have adjusted to “3rd level” in the control
panel, also set the regeneration adjustment switch to 3rd level.
Regeneration Adjustment Switch
0th Level 1st Level 2nd Level 3rd Level 4th Level 5th Level
DISHWASHER / USER INSTRUCTIONS
1 1 2 3 4 5
13 / 53
EN
Preparation
If the hardness level of the supply water
is above 90 °dF or if you are using well
water, then it is recommended to use water
purification devices and special filters.
If the hardness level of the supply water is
below 13°dF, there is no need to use salt
in your dishwasher. If this is the case, “No
Salt Warning Indicator” (if any) illuminates
continuously on the panel of your machine.
If the water hardness level adjustment is set
to level 1, the “No salt warning indicator”
will illuminate continuously although it is not
necessary to use salt. If you use salt under
this condition, salt will not be consumed and
the Salt indicator will not illuminate.
If you move your house, it is
C
necessary to readjust water
hardness level of your machine
by considering the information
given above according to the
hardness level of the supply
water in your new location. Your
machine will display the most
recently adjusted water hardness
level.
Adding salt
Water softening system needs to be
regenerated in order for the product
operates with the same performance
continuously. Dishwasher salt is used for this
purpose.
Use only special softening salts
C
produced particularly for the
dishwashers in your machine.
Salt reservoir will be filled
C
1. Firstly, take the lower basket out to add
2. Turn the salt reservoir lid counter-
3. Add 1 litre of water to salt reservoir of
with water when you start
the product. For this reason,
add salt before operating the
machine.
softening salt.
clockwise to open it (A, B).
your machine only in initial use (C).
C
14
/53 EN
It is recommended to use
granule- or powder-formed
softening salts in the water
softening system. Do not use
salts that do not completely
dissolve in water such as table
salt or rock salt. Otherwise the
performance of the system may
deteriorate in time.
DISHWASHER / USER INSTRUCTIONS
Preparation
4. Fill the salt reservoir with salt by
using the salt funnel (D). To speed up
dissolution rate of salt in water, stir it with
a spoon.
You can put about 2 kg of
softening salt into the salt
C
5. Replace the lid and tighten it when the
C
reservoir.
reservoir is full.
You need to add salt right before
starting the machine. Thus, the
overflowing salty water will be
flushed immediately, preventing
the risk of corrosion in machine.
In cases where you would not
start washing immediately, run
your machine empty in the
shortest program.
Detergent
You can use powder, liquid/gel or tablet
detergents in the machine.
Only use in the machine the
A
Adding detergent
C
A
Put the detergent into the detergent dispenser
just before operating the machine as
illustrated below.
1. Push the latch to right to open the
detergents produced particularly
for use with dishwashers. We
recommend you not to use
detergents that contain chlorine
and phosphate as they are
harmful for the environment.
Pay attention to the warnings
on the detergent packaging to
get better washing and drying
results. Contact the manufacturer
of the detergent for further
questions.
Do not put solvents into the
detergent dispenser. There is the
risk of explosion!
detergent dispenser lid (A).
Since different salt brands in the
C
DISHWASHER / USER INSTRUCTIONS
market have different particle
sizes and since the water
hardness may vary, dissolution
of the salt in water may take
a couple of hours. Therefore,
Salt Indicator remains on for a
while after adding salt into the
machine.
2. Put suggested amount of powder, liquid/
gel or tablet detergent in the reservoir.
EN
15 / 53
Preparation
1
Inside the detergent dispenser
C
3. Push the lid of the detergent dispenser to
there are level markings that help
you use appropriate amount
of powder detergent. When
brimful, detergent dispenser will
contain 45 cm³ of detergent. Fill
detergent up to 15 cm³ or 25
cm³ level marks in the detergent
dispenser according to fullness
of the machine and/or soiling
degree of the dishes. One
tablet is enough if you are using
detergent tablets.
close it. A "click" will be heard when the
lid is closed.
2
3
C
Use powder or liquid/gel
detergent in short programmes
without prewash since the
solubility of the tablet detergent
changes depending on the
temperature and time.
16
/53 EN
Tablet detergents
In addition to the conventional tablet
detergents, there are also commercially
available detergent tablets that show water
softening salt and/or rinse aid effect. Some
types of these detergents contain specialpurpose components such as glass and
stainless steel protectors. These tablets show
their effects up to a certain water hardness
level (21°dH). Water softening salt and
rinse aid must also be used together with the
detergent if the water hardness level is above
the mentioned level.
DISHWASHER / USER INSTRUCTIONS
Loading...