Dear Customer,
Thank you for prefering a Beko product.
We hope that your product which has been
manufactured with high quality and technology
will give you the best results. We advise you
to read through this manual and the other
accompanying documentation carefully
before using your product and keep it for
future reference. If you transfer the product
to someone else, give its manual as well. Pay
attention to all details and warnings specified
in the user manual and follow the instructions
given therein.
Use this user manual for the model indicated
on the cover page.
• Read the instructions.
Explanation of symbols
Throughout this user manual the following
symbols are used:
WARNING!
• Warning against scalding hazard.
NOTE
C
• Important information or useful hints about
usage.
Packaging materials of the product
are manufactured from recyclable
materials in accordance with our
National Environment Regulations.
Do not dispose of the packaging wastes with
the domestic waste or other wastes, discard
them to the dedicated collection points
designated by the local authorities.
B
DANGER!
• Warning against electric shock.
DANGER!
• Warning against fire hazard.
WARNING!
A
• Warning for hazardous situations with regard
to life and property.
WARNING!
• Warning against hot surfaces.
This product was manufactured using the latest technology in environmentally friendly conditions.
1 Important instructions for safety and environment
NOTE
C
• This section contains safety
instructions that will help protect
from risk of personal injury or
property damage. Failure to follow
these instructions shall void any
warranty.
1.1 General safety
WARNING!
A
This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand the
hazards involved. Children shall not
play with the appliance. Cleaning
and user maintenance shall not
be made by children without
supervision.
Children of less than 3 years should
be kept away unless continously
supervised.
• Adjustable feet should not be
removed. The gap between the
dryer and the floor should not be
reduced with materials such as
carpet, wood and tape. This will
cause problems with the dryer.
A
WARNING!
Always have the installation and
repairing procedures carried
out by the Authorized Service.
Manufacturer shall not be held
liable for damages that may arise
from procedures carried out by
unauthorized persons.
• Never wash the dryer by spraying
or pouring water onto it! There is
the risk of electric shock!
For the products with a steam
function:
WARNING!
A
• Use only distilled water or water
condensed in the water tank of the
machine in steam programs. Do
not use mains water or additives.
When using condensed water in the
water tank, it should be filtered and
cleared of fibres.
• Do not open the door when steam
programs are running. Hot water
may be expelled.
• Before putting laundry in a steam
program, stains on it should be
removed.
• You may only put laundry that is not
dirty or stained but permeated with
unpleasant odour in steam (odour
removal) program.
• Do not use any dry cleaning sets
or additional materials in a steam
program or in any program.
Dryer / User Manual
3
1.1.1 Electrical safety
DANGER!
B
• Electrical safety instructions
should be followed while electrical
connection is made during the
installation.
• Connect the dryer to a grounded
outlet protected by a fuse at the
value specified on the type label.
Have the grounding installation
performed by a qualified electrician.
Our company shall not be liable for
any damages that will arise when
the dryer is used without grounding
in accordance with the local
regulations.
• The voltage and allowed fuse
protection is stated on the type label
plate.
• The voltage specified on the type
label must be equal to your mains
voltage.
• Unplug the dryer when it is not in
use.
• Unplug the dryer from the mains
during installation, maintenance,
cleaning and repair works.
• Do not touch the plug with wet
hands! Never unplug by pulling
on the cable, always pull out by
grabbing the plug.
WARNING!
A
• The appliance must not be
supplied through an external
switching device, such as a timer,or
connected to a circuit that is
regularly switched on and off by
utility.
B
DANGER!
• Do not use extension cords, multiplugs or adaptors to connect the
dryer to power supply in order to
decrease the risk of fire and electric
shock.
• Power cable plug must be easily
accessible after installation.
• Damaged mains cable should be
changed notifying the Authorized
Service.
• If the dryer is faulty, it must not be
operated unless it is repaired by an
authorized service agent! There is
the risk of electric shock!
1.1.2 Product safety
DANGER!
• Superheating of the clothes inside
of the dryer can occur if you cancel
the programme or in the event of
a power failure whilst the dryer is
running, this concentration of heat
can cause self-combustion and fire
so always activate the ventilation
programme to cool down or quickly
remove all laundry from the dryer in
order to hang them up and dissipate
the heat.
WARNING!
A
• Ensure that the air inlet of the dryer
is open and it is well-ventilated.
• Product contains R290 refrigerant.
• R290 is an environment-friendly, but
flammable refrigerant.
• Keep the product away from
potential heat sources that may
cause it to ignite.
4
Dryer / User Manual
DANGER!
Points to be taken into
consideration for fire hazard:
Below specified laundry or items
must not be dried in the dryer
considering fire hazard.
• Unwashed laundry items
• Items soiled with oil, acetone,
alcohol, fuel oil, kerosene, stain
removers, turpentine, paraffin,
paraffin removers, petrol, wax or
wax removers must be washed in
hot water with plenty of detergent
before being dried in the dryer.
For this reason especially the items
containing the above specified
stains must be washed very well,
to do this use adequate detergent
and choose a high washing
temperature.
Below specified laundry or
items must not be dried in the
dryer due to the fire hazard:
• Garments or pillows bolstered with
rubber foam (latex foam), shower
bonnets, water resistant textiles,
materials with rubber reinforcement
and rubber foam pads.
Clothing cleaned with industrial
chemicals.
Items such as lighter, match,
coins, metal parts, needle etc. may
damage the drum set or may lead
to functional problems. Therefore
check all the laundry that you will
load into your dryer.
A
WARNING!
Never stop your dryer before the
programme completes. If you must
do this, remove all laundry quickly
and lay them out to dissipate the
heat.
DANGER!
• Clothes that are washed
inadequately may ignite on their
own and even may ignite after
drying ends.
• You must provide enough ventilation
in order to prevent gases exiting
from devices operating with other
types of fuels including the naked
flame from accumulating in the
room due to the back fire effect.
WARNING!
A
• Underwear that contains metal
reinforcements should not be dried
in the dryer. Dryer may be damaged
if metal reinforcements come loose
and break off during drying.
NOTE
C
• Use softeners and similar products
in accordance with the instructions
of their manufacturers.
Always clean the lint filter before or
after each loading. Never operate
the dryer without the lint filter
installed.
Dryer / User Manual
5
A
WARNING!
• Never attempt to repair the dryer
by yourself. Do not perform any
repair or replacement procedures
on the product even if you know
or have the ability to perform the
required procedure unless it is
clearly suggested in the operating
instructions or the published service
manual. Otherwise, you will be
putting your life and others’ lives in
danger.
• There must not be a lockable, sliding
or hinged door that may block the
opening of the loading door in the
place where your dryer is to be
installed.
• Install your dryer at places suitable
for home use. (Bathroom, closed
balcony, garage etc.)
• Make sure that pets do not enter the
dryer. Check the inside of the dryer
before operating it.
• Do not lean on the loading door of
your dryer when it is open, otherwise
it may fall over.
• The lint must not be allowed to
accumulate around the tumble dryer
• The tumble dryer is not to be used if
industrial chemicals have been used
for cleaning.
• Fabric softeners, or similar products.
should be used as specified by the
fabric softener instructions.
• Exhaust air must not be discharged
into a flue which is used for
exhausting fumes from appliances
burning gas or other fuels.
1.2 Mounting over a washing machine
• A fixing device should be used between
the two machines when installing the
dryer above a washing machine. The
fitting device must be installed by the
authorized service agent.
• Total weight of the washing machine
and the dryer -with full load- when
they are placed on top of each other
reaches to approx. 180 kilograms. Place
the products on a solid floor that has
sufficient load carrying capacity!
WARNING!
A
• Washing machine cannot be placed on
the dryer. Pay attention to the above
warnings during the installation on your
washing machine.
Installation Table for Washing Machine and Dryer
Washing Machine Depth
Dryer
Depth
62 cm
60 cm
54 cm
54 cm
60 cm
1.3 Intended use
• Dryer has been designed for domestic
• Use the dryer only for drying laundry that
• The manufacturer waives any
• The service life of the dryer that you
1.4 Child safety
• Packaging materials are dangerous for
• Electrical products are dangerous for the
Can be installedCannot be
installed
Can be
installedCannot be installed
use. It is not suitable for commercial
use and it must not be used out of its
intended use.
are marked accordingly.
responsibility arisen from incorrect usage
or transportation.
purchased is 10 years. During this period,
original spare parts will be available to
operate the dryer properly.
the children. Keep packaging materials
away from children.
children. Keep children away from the
product when it is operating. Do not let
< 50 cm
6
Dryer / User Manual
them tamper with the dryer. Use the childproof lock in order to prevent the children
to tamper with the dryer.
NOTE
C
Child-proof lock is on the control panel.
(See Child lock)
• Keep loading door closed even when the
dryer is not in use.
1.5 Compliance with the WEEE
regulation and disposing of the waste
product
This product complies with EU
WEEE Directive (2012/19/EU). This
product bears a classification
symbol for waste electrical and
electronic equipment (WEEE).
This product has been
manufactured with high quality
parts and materials which can be reused and
are suitable for recycling. Do not dispose of
the waste product with normal domestic and
other wastes at the end of its service life. Take
it to the collection center for the recycling of
electrical and electronic equipment. Please
consult your local authorities to learn about
these collection centers.
DANGER!
• R290 is an flammable refrigerant. Thus,
ensure that the system and the pipes
are not harmed during operation and
handling.
• Keep the product away from potential
heat sources that may cause it to ignite in
case of damage.
• Do not dispose of the product by putting
it in fire.
1.6 Compliance with RoHS Directive:
The product you have purchased complies
with EU RoHS Directive (2011/65/EU). It does
not contain harmful and prohibited materials
specified in the Directive.
1.7 Package information
Packaging materials of the product are
manufactured from recyclable materials in
accordance with our National Environment
Regulations. Do not dispose of the packaging
materials together with the domestic or other
wastes. Take them to the packaging material
collection points designated by the local
authorities.
1.8 Technical Specifications
EN
Height (Min. /
Max.)
84,6 cm / 86,6 cm*
Width59,7 cm
Depth58,9 cm
Capacity (max.)8 kg**
Net weight (± 4
kg)
44 kg
Voltage
See type label***Rated power input
Model code
* Min. height: Height with adjustable feet are
closed.
Max. height: Height with adjustable feet are
opened maximum.
** Dry laundry weight before washing.
*** Type label is located behind the loading
door.
NOTE
C
• Technical specifications of the dryer are
subject to specification without notice to
improve the quality of the product.
• Figures in this manual are schematic and
may not match the product exactly.
• Values stated on markers on the dryer
or in the other published documentation
accompanying with the dryer are
obtained in laboratory in accordance with
the relevant standards. Depending on
operational and environmental conditions
of the dryer, these values may vary.
Dryer / User Manual
7
2 Your Dryer
11
10
1
2
3
4
5
6
7
8
9
3 Installation
2.1 Overview
1. Top panel
2. Control panel
3. Loading door
4. Kick plate opening button
5. Ventilation grids
6. Adjustable legs
7. In models where the tank is placed below,
the water tank is inside the toe board
8. Type label
9. Lint filter
10. Water tank drawer (in models where the tank
is placed above)
11. Power cord
2.2 Package Contents
1. Water
drain
hose *
2. Filter
drawer
spare
sponge*
3. User
*Optional - may not be included, depends on
model.
8
Manual
4. Drying
basket*
5. Drying
basket
user
manual*
6. Water
Filling
Container*
7. Pure
Water*
8.
Fragrance
Capsules
Group*
Before the calling the nearest Authorized
Service for the installation of the dryer, ensure
that electrical installation and water drain is
appropriate referring to the user’s manual.
If they are not suitable, contact a qualified
electrician and technician to make necessary
arrangements.
NOTE
C
• Preparation of the dryer’s location
as well as the electrical and waste
water installations is under customer’s
responsibility.
WARNING!
A
• Prior to installation, visually check if the
dryer has any defects on it. If the drier
is damaged, do not have it installed.
Damaged products cause risks for your
safety.
• Let your dryer wait for 12 hours before
starting to use it.
3.1 Appropriate installation location
Install the dryer on a stable and level surface.
Dryer is heavy. Do not move it by yourself.
• Operate your dryer in a well ventilated,
dust-free environment.
• The gap between the dryer and the
surface should not be reduced by the
materials such as carpet, wood and tape.
• Do not cover the ventilation grills of the
dryer.
• There must not be a lockable, sliding or
hinged door that may block the opening
of the loading door in the place where
your dryer is to be installed.
• Once the dryer is installed, it should stay
at the same place where its connections
have been made. When installing the
dryer, make sure that its rear wall does
not touch anywhere (tap, socket, etc.).
• Place the dryer at least 1 cm away from
the edges of other furniture.
• Your dryer can be operated at
temperatures between +5°C and +35°C.
If the operating conditions fall outside
of this range, operation of the dryer will
Dryer / User Manual
be adversely affected and it can get
damaged.
• The rear surface of the tumble dryer shall
be placed against a wall.
DANGER!
B
Do not place the dryer on the power cable.
* Ignore following warning if your
product’s system does not contains
R290.
DANGER!
• Dryer contains R290 refrigerant.*
• R290 is an environment-friendly, but
flammable refrigerant.*
• Ensure that the air inlet of the dryer is
open and it is well-ventilated.*
• Keep potential flame sources away from
the dryer.*
3.2 Removing the transportation
safety assembly
WARNING!
A
• Remove the
transportation
safety assembly
before using the
dryer for the first
time.
• If the door swing
side of your
appliance can
be modified, see
the reversible
door mounting
instructions.
3.3 Connecting to the drain
You can directly drain accumulated water
through the water drain hose supplied with
the product instead of periodically draining the
water collected in the water tank.
Connecting the water drain hose
1
34
3 Connect one end of the drain hose
supplied with the dryer to the connection
point from where you removed the hose of
the product in previous step.
4 Connect the other end of the drain hose
directly to the wastewater drain or to the
washbasin.
2
1-2 Pull hose at
the behind of
the dryer by
hand in order
to disconnect
it from where it
is connected.
Do not use
any tools to
remove the
hose.
NOTE
C
• Water drain hose should be attached to a
height of maximum 80 cm.
• Make sure that the water drain hose is not
stepped on and it is not folded between
the drain and the machine.
• If there is an accessories pack supplied
with your product, please see the detailed
description.
3.4 Adjusting the feet
• Turn the feet to
left or right until
the dryer stands
level and firmly.
Dryer / User Manual
9
3.5 Transportation of the dryer
Drain all water that has remained in the dryer.
If direct water drain connection is made, then
remove the hose connections.
A
WARNING!
• We recommend carrying the dryer in
upright position. If it is not possible to
carry the machine in the upright position,
we recommend carrying it by tilting
towards the right side when looked from
the front.
3.6 Warnings about sounds
NOTE
C
• Water collected during operation is
pumped to water tank. It is normal to
hear pumping noise during this process.
3.7 Changing the illumination lamp
In case an illumination lamp is used in your
laundry dryer.To change the Bulb/LED used
for illumination of your tumble dryer, call your
Authorized Service.The lamp(s) used in this
appliance is not suitable for household room
illumination. The intended purpose of this
lamp is to assist the user to place laundry in
the tumble dryer in a comfortable way. The
lamps used in this appliance have to withstand
extreme physical conditions such as vibrations
and temperatures above 50 °C
• It is normal to
hear a metallic
noise from the
compressor
sometimes during
operation.
10
Dryer / User Manual
4 Preparation
4.1 Laundry suitable for drying in the
dryer
Always obey the instructions given on the
garment tags. Dry only the laundry having a
label stating that they are suitable for drying in
a dryer.
4.2 Laundry not suitable for drying in
the dryer
Do not dry
Items with this symbol
dried in the dryer.
NOTE
C
• Delicate embroidered fabrics, woollen,
silk garments, delicate and valuable
fabrics, airtight items and tulle curtains
are not suitable for machine drying.
4.3 Preparing laundry for drying
• Laundry may be tangled with each other
after washing. Separate the laundry items
before placing them into the dryer.
• Dry garments having metal accessories
such as zippers, inside out.
• Fasten the zippers, hooks and buckles
and button sheets.
4.4 Things to be done for energy
saving
• Spin your laundry at the highest speed
possible when washing them. Thus,
the drying time is shortened and energy
consumption is reduced.
• Sort out the laundry depending on their
type and thickness. Dry the same type of
laundry together. For example thin kitchen
towels and tableclothes dries earlier than
thick bathroom towels.
• Follow the instructions in the user manual
for programme selection.
• Do not open the loading door of the
machine during drying unless necessary.
If you must open the loading door, do not
keep it open for a long time.
• Do not add wet laundry while the dryer is
in operation
with dryer
should not be
• For models with a condenser unit: clean
the condenser once in a month or after
every 30 operations regularly. .
• Clean the filter periodically.Read the
Maintenance and cleaning of filters for
detalied information.
• For models with flue unit: comply with the
flue connection instructions and clean the
flue.
• During the drying process, air the room
well where your tumble dryer is operating.
4.5 Correct load capacity
Follow the instructions
in the “Programme
selection and
consumption table”.
Do not load more than
the capacity values
stated in the table.
Following weights are given as examples.
Laundry
Cotton
quilt covers
(double)
Cotton quilt
covers (single)
Bed sheets
(double)
Bed sheets
(single)
Large
tablecloths
Small
tablecloths
Tea napkins100
Bath towels700T-Shirts125
Hand towels 350
Approximate
weights (g)*
1500Blouses150
1000Cotton shirts300
500Shirts250
350
700Dresses350
250Jeans700
Laundry
Cotton
dresses
Handkerchiefs
(10 pieces)
*Dry laundry weight before washing.
Approximate
weights (g)*
500
100
Dryer / User Manual
11
5 Operating the product
5.1 Control Panel
12
1. Program Selection button
2. Display
3. On-Off button
4. Start/Stand-by button
5.2 Screen symbols
3
45678
5. End Time button
6. Time Programs Adjusting button
7. Audio Warning Level button
8. Dryness Settings Selection button
Tank
full
End/anti-
creasing
Bedding/
Duvet
Buzzer level symbol
Clean filter drawer warning symbol
Filter cleaning warning symbolChi ld lo ck war nin g sy m bol
Wate r tan k w arn in g sym bo l
cleaning
On/O
Cottons Eco
Heat exchanger
cleaning
Timer
Delay
Filter drawer /
Filter
Start/hold symbol
Steam symbol
Dryness level
Iron-dry
* Ti me disp layed ind icat es t he rem ain in g ti me t o th e en d of th e cyc le and th is
ti m e var ies as pe r th e h um idi ty o f th e lau nd ry.
Express
Drying
Child-proof
Mute
lock
Iron Dry
Cupboard
Dry
Dryness
Dryness
Level++
Level+
Clo se t- dr y
En d of c ycle
An ti -cr ease
En d ti m e
Rem aining tim e indicator*
Volume up
Jeans
Hygiene
(BabyProtect+)
Express
BabyProtect
Shirt 30'
12
14’
Delicates
Extra dry
Refreshment
Shirts
Cupboard
dry plus
Low
temperature
select
Sport
Start
pause
cancel
Daily
Freshen Up
Synthetics
Wool Refresh
Cottons
Drying Rack/
TimeDry
Dryness
Level
Mix
Express
30’
DownWear
Dryer / User Manual
5.3 Preparing the dryer
Plug in the tumble dryer
Open device door.
Place the laundry into the tub in a slight loosely.
Close the door by pushing.
NOTE
C
• Make sure there is nothing door and the
device while closing the door.
Press and hold On/Off/Cancel button for
1 second.
• When dryer is used for the first time,
declaration program (cupboard dry
cottons) is selected.
5.4 Program selection
Your dryer has 16 different programs.
Mix
Mix
Verluchten
Rafraîchir
Hemden 30’
Chemises 30’
• Select the desired program by turning the
program selection button..
• Displayed program selection and
consumption chart are based on sorting
by preferences of majority of users.
NOTE
C
• Program doesn’t start immediately only
by pressing the On/Off/Cancel button.
Start the program with the On/Off/Cancel
button after program selection.
Dryer / User Manual
13
5.5 Program selection and consumption chart
EN
ProgrammesProgramme Description
Cottons Iron Dry
Cottons Eco
Cottons Cupboard Dry
Cottons Extra Dry
Synthetics Iron Dry
Synthetics Cupboard
Dry
Drying Rack/ TimeDry
Freshen Up
Delicates
Jeans
Outdoor/Sports
Mix
14
You may dry your cotton laundry to be ironed in
this program to have them slightly damp for ease of
ironing. (Shirt, T-shirt, tablecloth, etc.)
You may dry all your cotton laundry in this program.
(T-shirt, pants, pyjamas, baby clothes, underwear,
linen, etc.) You can put your laundry in the wardrobe
without ironing.
You may use this program for extra dryness in thick
laundry such as pants, tracksuit. You can put your
laundry in the wardrobe without ironing.
You may dry your thick cotton laundry in this
program such as towels, bathrobe, etc. You can put
your laundry in the wardrobe without ironing.
You may dry your synthetic laundry to be ironed in
this program to have them slightly damp for ease of
ironing. (Shirt, T-shirt, tablecloth, etc.)
You may dry all your synthetic laundry in this
program. (Shirt, T-shirt, underwear, tablecloth, etc.)
You can put your laundry in the wardrobe without
ironing.
You may select from time programmes between
10 and 160 minutes to achieve the desired drying
level at low temperature. In this programme, tumble
drier’s operation lasts for the set time independently
from the dryness of laundry. This product is available
to be used with a drying basket as option. For
products that are sold without a basket, you can
obtain a basket from an authorized service and use
the drying programs specified above. For details of
use, see the drying basket user guide.
Ventilates for 10 minutes without blowing hot air.
You can ventilate the cotton and linen clothes
that have been enclosed for a long time with this
program to remove their odour. You can use this
program to ventilate and soften wool laundry that
can be washed in a washing machine. Do not use
for full drying.
You may dry your delicate laundry or laundry with
hand wash symbol (silk blouses, thin underwear,
etc.) at low temperature in this program.
You may dry denim pants, skirts, shirts or jackets in
this program.
Use it to dry your clothes made of synthetics, cotton
or mixed fabrics or waterproof products such as
functional jacket, raincoat etc. Tur n them inside out
prior to drying.
You can dry both cotton and synthetic laundry with
this programme.Sports and fitness clothes may be
dried with this program.
in washing
Capacity (kg)
81000145
81000197
81000205
81000210
480060
480070
---
--10
1,5120070
41200150
21000135
41000125
Spin speed
machine (rpm)
Dryer / User Manual
(minutes)
Drying Time
Shirts
Hygiene +
Duvet
DownWear
Daily ExpressUse this program to have 2 shirts ready for ironing.0,5120030
Energy consumption values
It dries the shirts in a more sensitive manner, and
causes less creasing and easier ironing.
It is a long-term program that you can use for the
clothes (baby clothes, towels, underwear, etc.
cotton) you require hygeine. Hygiene is provided
with high temperature. It is especially suitable for
durable fabrics. ((This program is identified and
approved by England’s “The British Foundation”
(Allergy UK).))
You can dry your feather or fibre filled textile that
bears can be dried in drier label as a single piece of
laundry. You can dry double duvet, pillow or coats
as single piece of laundry. Dry your cloths such as
coats and jackets turned inside out.
1,5120060
5800185
-800165
ProgrammesCapacity (kg)
Cottons Eco *8100060%1,97
Cottons Iron dry8100060%1,5
Synthetics cupboard
dry
“Cottons Eco programme” used at full and partial load is the standard drying programme to which
the information in the label and the fiche relates, that this programme is suitable for drying normal
wet Cottons laundry and that it is the most efficient programme in terms of energy consumption for
Cottons.
480040%0,75
(rpm)
machine
in washing
Spin speed
humidity
remaining
amount of
Approximate
Energy
* : Energy Label standard program (EN
NOTE
C
• When the program ends for not having
wrinkles on your delicate laundry, take out
your laundry immediately and hang them.
• To get better results from drying machine
programs, your laundry should be washed
61121:2012)
All the values on the chart are identified
according to EN 61121:2012 standard.
Consumption values may vary from the
valued in the chart depending on laundry
type, wringing speed, ambient conditions and
voltage levels.
with suitable program in your washing
machine and wrung with recommended
wringing speed.
• Shirt might remain slightly damp at the end
of the program. It is recommended not to
leave the shirts inside the drying machine.
value kWh
consumption
Dryer / User Manual
15
Allergy UK is the brand of the
Volume level high
British Allergy Association. Seal
of Approval is created to guide
people that require
recommendation about a
product that the related
product restricts / reduces / eliminates the
allergens or reduces the allergen content
significantly in the ambient where allergy
patients exist. It aims to provide assurance
that the products are tested scientifically or
examined in a way to provide measurable
results.
5.6 Auxiliary functions
Audible warning
Machine makes an audible warning when
the program is completed. To adjust the sound
level, use the Sound Warning Level button.
NOTE
C
• You can change the sound level before
the program starts or while the program
continues..
Dryness settings selection
Dryness settings button is used for
adjusting to desired dryness. Program time
may change depending on the selection.
NOTE
C
• You can activate this function only prior to
start of program.
Drying level damp
Volume level low
16
Drying level normal
Drying level extra
5.7 Warning symbols
NOTE
C
• Warning symbols may vary depending on
the model of your machine.
Dryer / User Manual
Fibre filter cleaning
When the program is completed, the warning
symbol for filter cleaning turns on.
NOTE
C
• For detailed information, See 6
Maintenance and cleaning.
• If filter cleaning symbol constantly flashes
See.7 Troubleshooting.
Emptying the water tank
When the program is completed, the warning
symbol to empty the water tank turns on.
NOTE
C
• For detailed information, See 6
Maintenance and cleaning.
If the water tank fills up while the program
continues, the warning symbol starts flashing
and the machine goes into stand-by. In this
case, empty the water tank and start the
program by pressing the Start / Stand-by
button. Warning symbol turns off and program
resumes.
Loading cover is open
If loading cover of the dryer is open while
drying, Stand-by symbol turns on and program
progress symbol flashes.
End time
You can delay the end time of the program up
to 24 hours with end time function.
• Open the loading door and place the
laundry.
• Select drying program, spin cycle and if
needed, additional functions.
• Press the End Time selection button and
set the delay time you wish. End Time
symbol turns on. (When pressed and hold
the button, End Time proceeds non-stop).
• Press the Start / Stand-by button. End
time countdown starts and Start symbol
turns on. “:” Separator in the middle of
displayed delay time flashes.
Cleaning the filter drawer
Warning symbol flashes periodically to remind
that filter drawer must be cleaned.
NOTE
C
• For detailed information, See 6
Maintenance and cleaning.
Dryer / User Manual
NOTE
C
• You can add or remove laundry within
end time. End Time symbol will turn off at
the end of countdown, drying starts and
duration of program is displayed. Displayed
time is the sum of normal drying time and
end time.
17
Changing the end time
If you want to change the duration during the
countdown:
• Press the On/Off/Cancel button for 3
seconds to cancel the program. Turn on
the machine again and repeat the Delay
Setting process for the duration you wish.
• When your machine is turned on for the
first time, it turns on with the declaration
program (cotton wardrobe dry).
Cancelling the end time function
If you want to cancel the end time countdown
and start the program immediately:
• Press the On/Off/Cancel button for 3
seconds to cancel the program.
• Press the On/Off/Cancel button to start
you previously selected program.
5.8 Starting the program
Press the Start/Stand-by button to start the
program.
Indicating start of the program, Start symbol
turns on, “:” separator in the middle of
remaining time keeps flashing. Program
Progress Symbol turns on.
5.9 Program progress status
• When the child lock is activated, all
buttons on the panel except the On/
Off/Cancel and Child Lock buttons are
deactivated.
• When the child lock is activated, indicator
symbols don’t change if the position of
Program Selection button is changed.
When Program Selection button is turned
and function buttons are pressed, the
letters “CL” flashes on the screen.
5.10 Child Lock
The machine has a child lock which prevents
the program flow from being interrupted when
the buttons are pressed during a program. To
activate the child lock
• Press and hold time programs and audio
warning buttons for 3 seconds.
• When the child lock is activated, the lock
symbol on the screen turns on.
18
• The child lock has to be deactivated to
be able to start a new program after the
current program is finished or to be able
to interfere with the program.
To Deactivate The Child Lock:
• Press and hold the child lock button for 3
seconds.
• Child lock deactivates when the dryer is
turned off and on by the On/Off/Cancel
button.
5.11 Changing the program after it is
started
You can change the program you selected to
dry your laundry with a different program after
the machine starts running.
• For example, to select Extra Dry instead
of Iron Dry, pause the program by
pressing the Start / Stand-by button.
Dryer / User Manual
• Select the Extra Dry program using the
Program Selection button.
• Press the Start/Stand-by button to start
the program.
Adding and removing clothes during
stand-by
• If you want to add or remove clothes
to/from the machine after the drying
program starts:
• Press the Start/Stand-by button to put
the machine in Stand-by state. The drying
operation stops.
• Open the loading door while in Standby state, and close the door after you
remove or add laundry.
• Press the Start/Stand-by button to start
the program.
NOTE
C
• Adding laundry after the drying operation
starts may cause the dried laundry inside
the machine to mix with wet laundry and
leave the laundry damp at the end of
operation.
• Adding or removing laundry during drying
may be repeated as many times as you
wish. But this operation continuously
interrupts the drying operation, and thus
increases program duration and energy
consumption. So, it is recommended to
add laundry before the program starts.
• If a new program is selected by turning the
program selection knob while the machine
is in stand-by; the running program
terminates and new program information is
displayed on the screen.
WARNING!
• Do not touch the inner surface of the drum
while adding or removing clothes during a
continuing program. The drum surface is
hot.
5.12 Cancelling the program
If you want to cancel the program and
terminate the drying operation for any
reason after the machine starts running,
keep the On/Off/Cancel button pressed
for 3 seconds.
WARNING!
A
• The inside of the machine shall be
extremely hot when you cancel the
program during machine operation, so run
the ventilation program to allow it to cool
down.
5.13 End of program
When the program ends, the Fibre Filter
Cleaning and Water Tank warning symbols
on the program observation indicator turn on.
Loading door may be opened and machine
becomes ready for another run.
To turn off the machine, press the On/Off/
Cancel button.
NOTE
C
• Wrinkle Prevention function activates the 2
hour-Wrinkle Prevention program if laundry
isn’t taken out of machine after completion
of the program.
• Clean the fibre filter after each drying. See
6.1 Cleaning Lint Filter / Loading Door Inner
Surface
• Empty the water tank after each drying.
See 6.3 Draining the water tank
5.14 Odor Feature
Read the ProScent manual for the use of
this feature if your dryer has odor application
capability.
Dryer / User Manual
19
6 Maintenance and cleaning
6.1 Loading Door Inner Surface
The hair and fibres that are separated from the
laundry during drying process is collected by
the Fibre Filter.
NOTE
C
• Fibres are formed during wearing and
washing clothes.
• You can clean the filter slot with a
vacuum cleaner.
• Clean both filters under water running in
reverse direction of fibre accumulation
or with a soft brush. Dry the filter before
placing it back.
A
WARNING!
• After each drying cycle, clean the fibre
filter and the inner surface of the loading
door.
To clean the fibre filter:
• Open the loading door.
• Hold the first part (inner filter) of the two
part fibre filter and remove it by pulling it
upwards.
• Collect the hair, fibres and cotton balls with
hand or with a soft cloth.
• Remove the second part (outer filter) by
pulling it upwards.
NOTE
C
• Ensure that hair, fibre and cotton balls do
not fall into the slot where the filters are
installed.
• Open both fibre filters (inner and outer
filters) remove the hair, fibre, cotton balls
with your damp hand or a vacuum cleaner
or a cloth.
• Insert the fibre filters
on one another and
place it back in its
place.
• Clean the loading door interior and its
washer with a soft damp cloth.
6.2 Cleaning the sensor
There are
dampness sensors
in the dryer that
detect whether
the laundry is dry
or not.
To clean the
sensors:
• Open the loading door of the dryer.
• Allow the machine to cool down if it is still
hot due to the drying process.
• Wipe the metal surfaces of the sensor
with a soft cloth, dampened with vinegar
and dry them.
20
Dryer / User Manual
NOTE
C
• Clean metal surfaces of the sensors 4
times a year.
• Do not use metal tools when cleaning
metal surfaces of the sensors.
WARNING!
A
• Never use solvents, cleaning agents or
similar substances for cleaning due to the
risk of fire and explosion!
6.3 Draining the water tank
Dampness of the laundry is removed and
condensed during drying process and the
water that arise accumulates in the water tank.
Drain the water tank after each drying cycle.
WARNING!
A
• Condensed water is not drinkable!
• Never remove the water tank when the
program is running!
If you forget to drain the water tank, the
machine will stop during the subsequent drying
cycles when the water tank is full and the Water
Tank warning symbol will flash. If this is the
case, drain the water tank and press Start /
Pause button to resume the drying cycle.
To drain the water tank:
1. Remove the water tank in the drawer
or container carefully.
• If there is lint accumulation in the funnel
of the water tank, clean it under running
water.
• Place the water tank into its seat.
NOTE
C
• If the direct water draining is used as an
option, there is no need to empty the
water tank.
6.4 Cleaning the evaporator
The hair and fibres that are not caught by the
fibre filter goes to the fins of the evaporator
behind the toe board and accumulates here.
If the evaporator”” icon is flashing or in 6
month periods, clean the evaporator.
• Open the toe
board by pressing
on it.
• To open the air
routing door, move
the release latch.
• Clean the fibres
on the evaporator
with a damp cloth
/ vacuum cleaner
with a brush by
moving upwards
and downwards.
2. Drain the water in the tank.
Dryer / User Manual
• After the cleaning
process is
completed, place
the air router door
to its place, move
the latches to close
it and close the toe
board.
21
A
WARNING!
• You can clean by hand, provided you wear
protective gloves. Do not try to clean with
bare hands. Evaporator fins may damage
your hands.
• Cleaning by left to right movements may
damage the evaporator fins. This may lead
to drying issues.
22
Dryer / User Manual
7 Troubleshooting
Drying operation takes too long.
Fibre filter (interior and exterior filter) pores may be clogged.
>>> Wash the fibre filters with warm water and dry.
Evaporator front side may be clogged. >>> Clean the front
side of the evaporator.
The ventilation grills in front of the machine may be closed.
>>> Remove any object in front of the ventilation grills that
blocks air.
Ventilation may be inadequate because the are the
machine is installed in is too small. >>> Open the door
or windows to prevent the room temperature from rising
very high.
A lime layer may have accumulated on the humidity
sensor. >>> Clean the humidity sensor.
Excessive amount of laundry might be loaded. >>> Do not
load the drying machine excessively.
Laundry might not have been wrung adequately. >>>
Perform a higher speed wringing on the washing machine.
Clothes come out damp after drying.
A program not suitable for the laundry type may have been
used.>>> Check the maintenance labels on the clothes
and select a program suitable for the clothes’ type or use
time programs as extra.
Fibre filter (interior and exterior filter) pores may be clogged.
>>> Wash the filters with warm water and dry.
Evaporator front side may be clogged. >>> Clean the front
side of the evaporator.
Excessive amount of laundry might be loaded. >>> Do not
load the drying machine excessively.
Laundry might not have been wrung adequately. >>>
Perform a higher speed wringing on the washing machine.
Drying machine does not turn on or program cannot be
started. Drying machine does not run after it is configured.
Power plug might be unplugged. >>> Make sure the
power cord is plugged in.
Loading door might be open. >>> Ensure that the loading
door is properly closed.
A program might not be set or Start / Pause /Cancel
button might not be pressed. >>> Check that the program
is set and it is not in Pause position..
Child lock may be activated. >>> Turn off the child lock.
Program terminated prematurely for no reason.
Loading door might be closed completely. >>> Ensure
that the loading door is properly closed.
There might be a power outage. >>> Press the Start /
Pause / Cancel button to start the program.
Water tank may be full. >>> Empty the water tank.
Clothes have shrunk, hardened or spoiled.
A program not suitable with the laundry type might have
been used. >>> Check the maintenance labels on the
clothes and select a program suitable for the clothes.
Water drips from the loading door.
Fibres might have gathered on the inner sides of the
loading door and the loading door gasket. >>> Clean the
inner surfaces of the loading door and the loading door
gasket surfaces.
Dryer / User Manual
Loading door opens by itself.
Loading door might be closed completely. >>> Push the
loading door until the closing sound is heard.
Water tank warning symbol is on/flashing.
Water tank may be full. >>> Empty the water tank.
Water discharge hose might have collapsed. >>> If the
product is connected directly to the water drain check the
water discharge hose.
The lighting inside the drying machine does not turn on. (In
models with lamp)
The drying machine might not have been turned on using
On/Off button. >>> Check that the drying machine is
turned on.
Lamp might be malfunctioning. >>> Contact Authorized
Service to replace the lamp.
Anti-crease icon is lit.
Anti-Crease mode that prevents the laundry in the drier
to crease may be activated. >>> Turn the drier off and
remove the laundry.
Fibre filter cleaning icon is lit.
Fibre filter (interior and exterior filter) may be unclean. >>>
Wash the filters with warm water and dry..
A layer may be formed on the fibre filter pores that leads to
clogging. >>> Wash the filters with warm water and dry.
Fibre filters may not be inserted. >>> Insert the interior and
exterior filters to their places.
An audible warning is heard from the machine
Fibre filters may not be inserted. >>> Insert the interior and
exterior filters to their places.
Evaporator warning icon is flashing.
Evaporator front side may be clogged with fibres. >>>
Clean the front side of the evaporator.
Fibre filters may not be inserted. >>> Insert the interior and
exterior filters to their places.
The lighting inside the drying machine turns on. (In models
with lamp)
If the drying machine is plugged to the power outlet, the
On/Off button is pressed and the door is open; the light
turns on. >>> Unplug the drying machine or bring the On/
Off button to Off position.
WARNING!
A
• If the problem persists after following the
instructions in this section, contact your vendor
or an Authorized Service. Never try to repair your
product yourself.
NOTE
C
• In an event that you encounter an issue on any part
on your appliance, you can ask for a replacement
by contacting the authorized service with the
appliance model number.
• Operating the appliance with non-authentic parts
may lead the appliance to malfunction.
• Manufacturer and distributor are not liable for
malfunctions resulting from using non-authentic
parts.
23
Loading...
+ 53 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.