Beko CN151120DX User manual [EN,TW]

0 (0)
Beko CN151120DX User manual

CN151120DX

EN TW

Please read this manual first!

Dear Customer,

We hope that your product, which has been produced in modern plants and checked under the most meticulous quality control procedures, will provide you an effective service.

For this, we recommend you to carefully read the entire manual of your product before using it and keep it at hand for future references.

This manual

Will help you use your appliance in a fast and safe way.

Read the manual before installing and operating your product.

Follow the instructions, especially those for safety.

Keep the manual in an easily accessible place as you may need it later.

Besides, read also the other documents provided with your product.

Please note that this manual may be valid for other models as well.

Symbols and their descriptions

This instruction manual contains the following symbols:

C Important information or useful tips.

AWarning against dangerous conditions for life and property.

BWarning against electric voltage.

1 EN

CONTENTS

1 Refrigerator

3

2 Important Safety

 

Warnings

4

Intended use......................................

4

General safety...................................

4

For products with a ...........................

8

water dispenser;.................................

8

Child safety........................................

9

Compliance with WEEE Directive and

Disposing of the Waste Product: .......

9

Package information..........................

9

HC warning........................................

9

Things to be done for energy saving.10

Recommendations for the fresh food

compartment...................................

10

3 Installation

11

Points to be paid attention to when the

relocation of the refrigerator..............

11

Electrical connection........................

11

Adjusting the legs.............................

12

Disposing of the packaging..............

12

Disposing of your old refrigerator......

12

Placing and Installation.....................

12

Water connection.............................

13

Connecting the water hose to the

 

refrigerator.......................................

13

Changing the illumination lamp ........

14

Connecting of the water hose to the

cold water mains line........................

14

Water filter........................................

15

Mounting the external filter onto the

wall..................................................

15

4 Preparation

16

5 Using your refrigerator 17

Indicator Panel.................................

17

Door Open Warning.........................

22

Dual cooling system:........................

22

Freezing fresh food...........................

22

Recommendations for preservation of

frozen food.......................................

23

Defrosting........................................

23

Placing the food...............................

23

Deep-freeze information...................

24

Water dispenser ..............................

25

Water tray .......................................

26

Egg section......................................

27

Blue light..........................................

27

Rotary storage container..................

27

Movable Body shelf:.........................

28

Icematic and ice storage container...

29

Ice Machine .....................................

29

Description and cleaning of odor

 

filter .................................................

30

Humidity Controlled Crisper..............

30

(FreSHelf).........................................

30

6 Maintenance and

 

cleaning

31

Protection of plastic surfaces ..........

31

7 Troubleshooting

32

2 EN

1 Refrigerator

1

13

12

14

*11

*10

*9

*7

*8

*6

15

*5

*2

*3

*4

1.

 

 

 

 

Egg holder

8.

Drawer

2.

Fridge compartment shelf

9.

Crisper

3.

Sliding and Rotary storage containers

10.

Adjustable glass shelves

4.

Bottle shelf

11.

Bottle holder

5.

Freezer compartment drawers

12.

Illumination lens

6.

Ice container

13.

Fan

7.

Ice machine

14.

Fridge compartment

 

 

 

15.

Freezer compartment

*OPTIONAL

CFigures that take place in this instruction manual are schematic and may not correspond exactly with your product. If the subject parts are not included in the product you have purchased, then it is valid for other models.

3 EN

2 Important Safety Warnings

Please review the following information. Failure to observe this information may cause injuries or material damage. Otherwise, all warranty and reliability commitments will become invalid.

The service life of your product is 10 years. During this period, original spare parts will be available to operate the product properly.

Intended use

This product is intended to be used

indoors and in closed areas such as homes;

in closed working environments such as stores and offices;

in closed accommodation areas such as farm houses, hotels, pensions.

It should not be used

outdoors.

General safety

When you want to dispose/scrap the product, we recommend

you to consult the

4

 

authorized service in order to learn the

required information and authorized bodies.

Consult your authorized service for all your questions and problems related to the refrigerator. Do not intervene or let someone intervene to the refrigerator without notifying the authorised services.

For products with a freezer compartment; Do not eat cone ice cream and ice cubes immediately after you take them out of the freezer compartment! (This may cause frostbite in your mouth.)

For products with a freezer compartment; Do not put bottled and canned liquid beverages in the freezer compartment. Otherwise, these may burst.

Do not touch frozen food by hand; they may stick to your hand.

EN

Unplug your refrigerator before cleaning or defrosting.

Vapor and vaporized cleaning materials should never be used in cleaning and defrosting processes of your refrigerator. In such cases, the vapor may get in contact with the electrical parts and cause short circuit or electric shock.

Never use the parts on your refrigerator such as the door as a means of support or step.

Do not use electrical devices inside the refrigerator.

Do not damage the parts, where the refrigerant is circulating, with drilling or cutting tools. The refrigerant that might blow out when the gas channels of the evaporator, pipe extensions or surface coatings are punctured causes skin irritations and eye injuries.

Do not cover or block the ventilation holes on your refrigerator with any material.

Electrical devices must be repaired by only authorised persons.

Repairs performed by incompetent persons create a risk for the user.

In case of any failure or during a maintenance or repair work, disconnect your refrigerator’s mains supply by either turning off the relevant fuse

or unplugging your appliance.

Do not pull by the cable when pulling off the plug.

Ensure highly alcoholic beverages are stored securely with the lid fastened and placed upright.

Never store spray cans containing

flammable and explosive substances in the refrigerator.

Do not use mechanical devices or other means to accelerate the defrosting process, other than those

5 EN

recommended by the manufacturer.

This product is not intended to be used by persons with physical, sensory or mental disorders or unlearned or inexperienced people (including children) unless they are attended by a person who will

be responsible for their safety or who will instruct them accordingly for use of the product

Do not operate a damaged refrigerator. Consult with the service agent if you have any concerns.

Electrical safety of your refrigerator shall be guaranteed only if the earth system in your house complies with standards.

Exposing the product to rain, snow, sun and wind is dangerous with respect to electrical safety.

Contact authorized service when there is a power cable damage to avoid danger.

Never plug the refrigerator into the wall outlet during installation. Otherwise, risk of death or serious injury may arise.

This refrigerator is intended for only storing food items. It must not be used for any other purpose.

Label of technical specifications is located on the left wall inside the refrigerator.

Never connect your refrigerator to electricitysaving systems; they may damage the refrigerator.

If there is a blue light on the refrigerator, do not look at the blue light with optical tools.

For manually controlled refrigerators, wait for at least 5 minutes to start the refrigerator after power failure.

This operation manual should be handed in to the new owner of the product when it is given to others.

6 EN

Avoid causing damage on power cable when transporting the refrigerator. Bending cable may cause fire. Never place heavy objects on power cable. Do not touch the plug with wet hands when plugging the product

Do not plug the refrigerator if the wall outlet is loose.

Water should not be sprayed on inner or outer parts of the product for safety purposes.

Do not spray substances containing inflammable gases such as propane gas near the refrigerator to avoid fire and explosion risk.

Never place containers filled with water on top of the refrigerator; in the event of spillages,

this may cause electric shock or fire.

Do not overload the refrigerator with food. If overloaded, the food

items may fall down and hurt you and damage refrigerator when you open the door.

Never place objects on top of the refrigerator; otherwise, these objects may fall down when you open or close the refrigerator’s door.

As they require a precise temperature, vaccines, heat-sensitive medicine and scientific materials and etc. should not be kept in the refrigerator.

If not to be used for a long time, refrigerator should be unplugged. A possible problem in power cable may cause fire.

The plug’s tip should be cleaned regularly with a dry cloth; otherwise, it may cause fire.

Refrigerator may move if adjustable legs are not properly secured on the floor. Properly securing

7 EN

adjustable legs on the floor can prevent the refrigerator to move.

When carrying the refrigerator, do not hold it from door handle. Otherwise, it may be snapped.

When you have to place your product next to another refrigerator or freezer, the distance between devices should be at least 8cm. Otherwise, adjacent side walls may be humidified.

The product shall never be used while the compartment which is located at the top or back of your product and in which electronic boards are available (electronic board box cover) (1) is open.

1

1

For products with a water dispenser;

Pressure for cold water inlet shall be maximum 90 psi (6.2 bar). If your water pressure exceeds 80 psi (5.5 bar), use a pressure limiting valve in your mains system. If you do not know how to check your water pressure, ask for the help of a professional plumber.

If there is risk of water hammer effect in your installation, always use a water hammer prevention equipment in your installation. Consult Professional

plumbers is you are not sure that there is no

8 EN

water hammer effect in your installation.

Do not install on the hot water inlet. Take precautions against of the risk of freezing of the hoses. Water temperature operating interval shall be 33°F (0.6°C) minimum

and 100°F (38°C) maximum.

Use only potable water.

Child safety

If the door has a lock, the key should be kept away from reach of children.

Children must be supervised to prevent them from tampering

with the product.

Compliance with WEEE Directive and Disposing of the Waste Product:

This product complies

with EU WEEE Directive (2012/19/EU). This product

bears a classification symbol for waste electrical and electronic equipment

(WEEE).

This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Therefore, do not dispose the product with normal domestic

waste at the end of its service life. Take it to a collection point for the recycling of electrical and electronic equipment. Please consult your local authorities

to learn the nearest collection point. Help protect the environment and natural resources by recycling used products. For children’s safety, cut the power cable and break the locking mechanism of the door, if any, so

that it will be non-functional before disposing of the product.

Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our

National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

Do not forget...

Any recycled substance is an indispensable matter for nature and our national asset wealth.

If you want to contribute to the re-evaluation of the packaging materials, you can consult to your environmentalist organizations or the municipalities where you are located.

HC warning

If your product's cooling system contains R600a:

This gas is flammable. Therefore, pay attention to not damaging the cooling system and piping during usage and transportation. In the event of damage, keep your product away from potential fire sources that can cause the product catch a fire and ventilate the room in which the unit is placed.

9 EN

Ignore this warning if your product's cooling system contains R134a.

Type of gas used in the product is stated in the type label which is on the left wall inside the refrigerator.

Never throw the product in fire for disposal.

Things to be done for energy saving

Do not leave the doors of your refrigerator open for a long time.

Do not put hot food or drinks in your refrigerator.

Do not overload your refrigerator so that the air circulation inside of it is not prevented.

Do not install your refrigerator under direct sunlight or near heat emitting appliances such as ovens, dishwashers or radiators. Keep your refrigerator at least 30cm away from heat emitting sources and at least 5cm from electrical ovens.

Pay attention to keep your food in closed containers.

For products with a freezer compartment; You can store maximum amount of food items in the freezer when you remove the shelf or drawer of the freezer. Energy consumption value stated for your refrigerator has been determined

by removing freezer shelf or drawer and under maximum load. There is no harm to use a shelf or drawer

according to the shapes and size of food to be frozen.

Thawing frozen food in fridge compartment will both provide energy saving and preserve the food quality.

Recommendations for the fresh food compartment

*optional

Do not allow the food to touch the temperature sensor in fresh food compartment. To allow the fresh food compartment keep its ideal storage temperature, sensor must not be hindered by food.

Do not place hot foods in the product.

10 EN

3 Installation

B In case the information which are given in the user manual are not taken into account, manufacturer will

not assume any liability for this.

Points to be paid attention to when the relocation of the refrigerator

1.Your refrigerator should be unplugged.Before transportation of your refrigerator, it should be emptied and cleaned.

2.Before it is re-packaged, shelves, accessories, crisper, etc. inside your refrigerator should be fixed with adhesive tape and secured against impacts. Package should

be bound with a thick tape or sound ropes and the transportation rules on the package should be strictly observed.

3.Original packaging and foam materials should be kept for future transportations or moving.

Before you start the refrigerator,

Check the following before you start to use your refrigerator:

1.Attach 2 plastic wedges as illustrated below. Plastic wedges are intended to keep the distance which will ensure the air circulation between your refrigerator and the wall. (The picture is drawn up as a representation and it is not identical with your product.)

2.Clean the interior of the refrigerator as recommended in the “Maintenance and cleaning” section.

3.Connect the plug of the refrigerator to the wall socket. When the fridge door is opened, fridge internal lamp will turn on.

4.When the compressor starts to operate, a sound will be heard. The liquid and gases sealed within the refrigeration system may also give rise to noise, even if the compressor is not running and this is quite normal.

5.Front edges of the refrigerator may feel warm. This is normal. These areas are designed to be warm to avoid condensation.

Electrical connection

Connect your product to a grounded socket which is being protected by a fuse with the appropriate capacity.

Important:

The connection must be in compliance with national regulations.

The power plug must be easily accessible after installation.

Electrical safety of your refrigerator shall be guaranteed only if the earth system in your house complies with standards.

The voltage stated on the label located at left inner side of your product should be equal to your network voltage.

Extension cables and multi plugs must not be used for connection.

11 EN

B A damaged power cable must be replaced by a qualified electrician.

B Product must not be operated before it is repaired! There is the risk of

electric shock!

Disposing of the packaging

The packing materials may be dangerous for children. Keep the packing materials out of the reach of children or dispose of them by classifying them in accordance with the waste instructions stated by your local authorities. Do not throw away with regular house waste, throw away on packaging pick up spots designated by the local authorities.

The packing of your refrigerator is produced from recyclable materials.

Disposing of your old refrigerator

Dispose of your old refrigerator without giving any harm to the environment.

You may consult your authorized dealer or waste collection center of your municipality about the disposal of your refrigerator.

Before disposing of your refrigerator, cut out the electric plug and, if there are any locks on the door, make them inoperable in order to protect children against any danger.

Placing and Installation

A If the entrance door of the room where the refrigerator will be installed is not wide enough for the refrigerator to pass through, then call the authorized service to have them remove the doors of your refrigerator and pass it sideways through the door.

1. Install your refrigerator to a place that allows ease of use.

2.Keep your refrigerator away from heat sources, humid places and direct sunlight.

3.There must be appropriate air ventilation around your refrigerator in order to achieve an efficient operation. If the refrigerator is to be placed in a recess in the wall, there must be at least 5 cm distance with the ceiling and at least 5 cm with the wall. Do not place your product on the materials such as rug or carpet.

4.Place your refrigerator on an even floor surface to prevent jolts.

Adjusting the legs

If your refrigerator is unbalanced;

You can balance your refrigerator by turning its front legs as illustrated in the figure. The corner where the leg exists is lowered when you turn in the direction of black arrow and raised when you turn in the opposite

direction. Taking help from someone to slightly lift the refrigerator will facilitate this process.

12 EN

Water connection

Depending on the model of the refrigerator, you can connect it either to a demijohn or water mains.

First you must connect the water hose to the refrigerator.

In cases where a demijohn is used, a separate pump must also be used.

WARNING: Refrigerator and the pump, if any, must be unplugged during connection.

Following parts may not be supplied with your product since they are not required when using a demijohn.

Check that following parts have been delivered together with the product:

1.Union for connecting the water hose to the rear of the refrigerator

2.3 pieces of pipe clips (used to secure the water hose)

3.5-meter long water hose (1/4 inch in diameter)

4.Cold mains water valve with mesh filter (tap adapter)

5.External water filter. (If there is a demijohn connection; it is not necessary to use a water filter.)

1

2

 

3

4

*5

Connecting the water hose to the refrigerator

1.Slip the union (b) onto the water hose (a).

2.Push the water hose downwards firmly to slip it onto the water inlet valve

(c).

3.Tighten the union (c) by hand to secure it onto the water inlet valve.

Normally, you are not required to tighten the union with a tool. However, you can use a spanner or pliers to tighten the union if there is a leakage.

a

a

2

3

b

13 EN

Connecting of the water hose to the cold water mains line

(in some models)

If you will use the refrigerator by connecting it to the cold water mains line, you must install a standard 1/2” valve connector to the cold water installation of your home. If this valve is not present or you are not sure, consult a qualified plumber.

1.Separate the union from the tap adaptor.

2.Install the tap adaptor to standard 1/2” valve connector.

3.After inserting the water hose to the union, install it to the tap adaptor and insert to the union to the tap adapter.

4.Tighten the union by hand.

WARNING: Secure the water hose to suitable points by means of the clips supplied to avoid any damage or displacement or accidental disconnection.

WARNING: After turning on the water valve, make sure that there is no leakage at both connection points of the water hose. If there is a leakage, turn off the valve immediately and tighten all joints again using a spanner or a pliers.

WARNING: Make sure that standard 1/2” valve connector is available and completely turned off on your cold water mains line.

Changing the illumination lamp

To change the Bulb/LED used for illumination of your refrigerator, call your AuthorisedService.

The lamp(s) used in this appliance is not suitable for household room illumination. The intended purpose of this lamp is

to assist the user to place foodstuffs in the refrigerator/freezer in a safe and comfortable way.

The lamps used in this appliance have to withstand extreme physical conditions such as temperatures below -20 °C.

(only chest and upright freezer)

14 EN

Water filter

(in some models)

Your refrigerator may be equipped with an external or internal filter depending on its model. To fit the water filter, follow the instructions below referring to the figures supplied:

Mounting the external filter onto the wall

1.First, determine the location to mount the external filter.

2.Then, determine the distance between the filter and the tap and filter and the water inlet respectively. Prepare hoses at required lengths.

3.Mount the filter connection kit onto the wall by using a screwdriver and attach the filter.

WARNING: Water filter must be hold upright as shown in the figure. It is critical to connect the water inlet and outlet hoses on the filter correctly.

After connecting the filter, do not consume the first 10 glasses of water. WARNING: Never mount the filter onto the refrigerator. Coolant pipes might be pierced!

After connecting the filter, do not consume the first 10 glasses of water. WARNING: Never mount the filter onto the refrigerator. Coolant pipes might be pierced!

15 EN

4 Preparation

CYour refrigerator should be installed at least 300 mm away from heat sources such as hobs, ovens, central heater and stoves and at least 50 mm away from electrical ovens and should not be located under direct sunlight.

CThe ambient temperature of the room where you install your refrigerator should at least be 10°C. Operating your refrigerator under cooler conditions is not recommended with regard to its efficiency.

CPlease make sure that the interior of your refrigerator is cleaned thoroughly.

CIf two refrigerators are to be installed side by side, there should be at least 20 mm distance between them.

CWhen you operate your refrigerator for the first time, please observe the following instructions during the initial six hours.

-The door should not be opened frequently.

-It must be operated empty without any food in it.

-Do not unplug your refrigerator. If

a power failure occurs out of your control, please see the warnings in the “Recommended solutions for the problems” section.

COriginal packaging and foam materials should be kept for future transportations or moving.

16 EN

5 Using your refrigerator

Indicator Panel

Indicator panels may vary depending on your product's model.

Indicator panels may vary depending on your product’s model.

Indicator panel aids in using your refrigerator with its audio and visual functions.

*1

2

3

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10

9

8

*7

6

5

1.Automatic Ice Machine Off/On indicator

2.Fridge Compartment Indicator

3.Error Status Indicator

4.Temperature Indicator

5.Vacation Button

6.Temperature Setting Button

7.Ice Cancel Button

8.Compartment Selection Button

9.Freezer Compartment Indicator

10.Economy Mode Indicator

CFigures that take place in this instruction manual are schematic and may not correspond exactly with your product. If the subject parts are not included in the product you have purchased, then it is valid for other models.

17 EN

1. Automatic Ice Machine Off/On indicator

This symbol appears on the display when Ice Off function is activated.

2. Fridge Compartment Indicator

Fridge compartment light illuminates when adjusting the fridge compartment temperature.

3. Error Status Indicator

If your refrigerator does not cool adequately or if there is a sensor failure, this indicator will be activated. When this indicator is active, Freezer Compartment Temperature indicator will display “e” and Fridge Compartment Temperature Indicator

will display numbers such as “1,2,3…”. These numbers on the indicator provides information about the error to the service personnel.

4.Temperature Indicator

Indicates the temperatures of fridge, freezer compartment.

5.Vacation Button

Press and hold this button for 3 sec. to activate the Vacation function. Press this button again to deactivate the selected function.

6. Temperature Setting Button

Changes the temperature of the relevant compartment between -5°F/ 21°C and +46 °F/8 °C.

7.Ice Cancel Button

Refrigerator stops ice production when you press selection button for 3 seconds.

8.Refrigerator Compartment

Selection Button Press Refrigerator Compartment Selection Button to switch between fridge and freezer compartments.

9.Freezer Compartment Indicator

Freezer compartment light illuminates when adjusting the freezer compartment temperature.

10.Economy Mode Indicator

This indicates that the refrigerator is running in energy-efficient mode. This indicator will be active if the Freezer Compartment temperature is set to +5°F/-15 °C.

18 EN

* OPTIONAL

14

13

12

11

10

9

8

7

1.Fridge compartment setting button

2.Freezer compartment setting / Icematic on-off button

3.Error status indicator

4.Key lock indicator

5.Eco Extra Function indicator

6.Eco Extra/Vacation Button

7.Vacation function indicator

8.Economic usage indicator

1

2

3

4

5

6

9.Quick fridge function indicator

10.Quick fridge function button

11.Fridge compartment temperature setting indicator

12.Quick freeze function button

13.Freezer compartment temperature setting indicator

14.Quick freeze function indicator

CFigures that take place in this instruction manual are schematic and may not correspond exactly with your product. If the subject parts are not included in the product you have purchased, then it is valid for other models.

19 EN

1.Fridge Compartment Setting Button

This function allows you to make the fridge compartment temperature setting. Press this button to set the

temperature of the fridge compartment to 8, 6, 4, 2 respectively.

2.Freezer Compartment Setting / Icematic On-Off Button

This function allows you to make the freezer compartment temperature setting. Press this button to set

the temperature of the freezer compartment to -18, -20, -22 and -24 respectively.

To stop ice formation, press Icematic on-off button for 3 seconds. Water flow from water tank will stop when this function is selected. However, ice made previously can be taken from the Icematic. To restart ice formation, press Icematic on-off button for 3 seconds.

3. Error Status Indicator

If your refrigerator does not cool adequately or if there is a sensor failure, this indicator will be activated. When this indicator is active, Freezer Compartment Temperature indicator will display "E" and Fridge Compartment Temperature Indicator

will display numbers such as "1,2,3…". These numbers on the indicator provides information about the error to the service personnel.

When you place hot food into the freezer compartment or if you leave the door open for a long time, exclamation mark can illuminate for some time. This is not a failure; this warning will disappear when the food cools down.

4. Key Lock Indicator

Use this function if you do not want your refrigerator temperature setting changed. Press Fridge compartment setting button and

Freezer compartment setting button simultaneously for a long time (3 sec) to activate this function.

5. Eco Extra Function Indicator

It indicates that the Eco-Extra function is active.

If this function is active, your refrigerator will automatically detect the least usage periods and energyefficient cooling will be performed during those times. Economy indicator will be active while energy-efficient cooling is performed.

Press the relevant button again to deactivate this function.

6.Eco Extra/Vacation Button

Press this button briefly to activate the Eco Extra function. Press and hold this button for 3 sec. to activate the Vacation function. Press this button again to deactivate the selected function.

7.Vacation Function Indicator

Indicates that the vacation function is active. If this function is active,

"- -" appears on the indicator of the fridge compartment and no cooling is performed in the fridge compartment. Other compartments will be cooled in accordance with the temperature set for them.

Press the relevant button again to deactivate this function.

20 EN

Loading...
+ 46 hidden pages