do not remove the top cover (or the
rear section). No user serviceable
parts inside; refer servicing to
qualified personnel.
shock, do not expose this appliance
to rain and moisture. The apparatus
shall not be exposed to dripping or
splashing and no objects filled with
liquids, such as vases, shall be
placed on the apparatus.
This symbol, wherever it appears,
alerts you to the presence of
uninsulated dangerous voltage
inside the enclosurevoltage that
may be sufficient to constitute a risk
of shock.
This symbol, wherever it appears,
alerts you to important operating and
maintenance instructions in the
accompanying literature. Please
read the manual.
DETAILED SAFETY INSTRUCTIONS:
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tipping over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15) CAUTION - These service instructions are for use by qualified service personnel only. To reduce the
risk of electric shock do not perform any servicing other than that contained in the operation instructions
unless you are qualified to do so.
2
MINIMON MON800
MINIMON
Ultra-Compact Stereo Monitor Matrix Mixer with Talkback Mic
MON800
s Ultra-compact 9.5 monitor matrix mixer for studio and stage applications
s Dedicated input section with 4 selectable and mixable stereo inputs
s Accurate 6-digit LED main stereo output meters for precise level indication
s High-power phones output with dedicated Level control
s 3 selectable stereo speaker outputs with separate Level controls for ultimate
monitoring
s Professional Mute, Dim and Mono functions for ultimate flexibility and phase
check
s Talkback section with internal microphone and comprehensive routing options
s High-quality potentiometers and illuminated switches for long-term reliability
DEUTSCH
s Ultra low-noise audio operational amplifiers offer outstanding sound
performance
s All Mini Series models can be stacked on top of each other to create an ultra-
compact signal processor solution
s High-quality components and exceptionally rugged construction ensure long
life
s Conceived and designed by BEHRINGER Germany
3
MINIMON MON800
FOREWORD
Dear Customer,
welcome to the community of Mini Series users and thank
you very much for expressing your confidence in
BEHRINGER products by purchasing the MON800. It is
one of my most pleasant tasks to write this letter to you,
because it is the culmination of many months of hard work
delivered by our engineering team to reach a very ambitious
goal: to design an outstanding device whose high level of
functionality will give you maximum performance.
The task to design our new MINIMON certainly meant a
great deal of responsibility. You, the discerning user and
musician, were the focus of our entire development efforts.
It also meant a lot of work and night shifts to accomplish
this goal. But it was fun, too. Developing a product usually
brings a lot of people together, and what a great feeling it is
when everybody who participated in such a project can be
proud of what weve achieved.
It is our philosophy to share our joy with you, because you
are the most important member of the BEHRINGER family.
With your highly competent suggestions for new products
youve greatly contributed to shaping our company and
uncompromising quality as well as excellent technical and audio properties at an extremely favorable
price. All of this will enable you to fully unfold your creativity without being hampered by budget
constraints.
We are often asked how we can make it to produce such high-grade devices at such unbelievably
low prices. The answer is quite simple: its you, our customers! Many satisfied customers means
large sales volumes enabling us to get better conditions of purchase for components, etc. Isnt it
only fair to pass this benefit back to you? Because we know that your success is our success, too!
I would like to thank all people whose help on Project MINIMON MON800 has made it all possible.
Everybody has made very personal contributions, starting from the designers of the unit via the
many staff members in our company to you, the user of BEHRINGER products.
Thank you for showing your confidence in BEHRINGER products by purchasing the MINIMON
MON800. With the MINIMON MON800 you have purchased a flexible monitoring unit, which allows
you to control a variety of signals during music production. You can use the MON800 as an add-on
unit to a mixing console with only limited monitoring capabilities, or you can use it without a console
at all. With the flick of a switch you can listen to your productions over different loudspeaker systems
and thus be able to identify mixing problems at an early stage. Recording musicians can be provided
with appropriate monitor signals and thanks to the talk-back microphone its you who has the entire
recording process under control
The MON800 features a clearly structured input section with four selectable and mixable stereo
inputs, as well as a high-precision, 6-digit LED output level meter for accurate level control. It also
includes a powerful headphones output with its own volume control, plus three selectable stereo
loudspeaker outputs with separate volume controls for optimum adjustment.
The Mute and Dim functions as well as a mono switch for checking signals for mono compatibility
(phase) give the MON800 even greater flexibility. The integrated talk-back section with its built-in
microphone provides you with a full set of routing options. High-quality potentiometers and backlit
switches ensure long-term reliability. What is more, our extremely low-noise operational amplifiers
are synonymous for outstanding audio quality.
With the MON800 you have your music productions totally under control!
1. INTRODUCTION
5
MINIMON MON800
1.1 Before you get started
1.1.1 Shipment
Your MON800 was carefully packed at the assembly plant to assure secure transport. Should the
condition of the cardboard box suggest that damage may have taken place, please inspect the unit
immediately and look for physical indications of damage.
+Damaged equipment should NEVER be sent directly to us. Please inform the dealer
from whom you acquired the unit immediately as well as the transportation company
from which you took delivery. Otherwise, all claims for replacement/repair may be
rendered invalid.
+Please always use the original packaging to avoid damage due to storage or shipping.
+Never let unsupervised children play with the MON800 or with its packaging.
+Please dispose of all packaging materials in an environmentally friendly fashion.
1.1.2 Initial operation
Be sure that there is enough space around the unit for cooling. To avoid overheating, do not place
the MON800 on top of power amps or near radiators, etc.
+To power the MON800, use only the power supply unit that is delivered with your
equipment.
+Please ensure that the unit is installed and operated only by people qualified to do so.
During installation and operation the user must have sufficient electrical contact to
earth. Electrostatic discharge may affect the operation of the unit.
1.1.3 Online registration
Please do remember to register your new BEHRINGER equipment right after your purchase by
visiting www.behringer.com (alternatively www.behringer.de) and kindly read the terms and conditions
of our warranty carefully.
Should your BEHRINGER product malfunction, our goal is to have it repaired as quickly as possible.
To arrange for warranty service, please contact the retailer from whom the equipment was purchased.
Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our
subsidiaries. Corresponding contact information is included in the original equipment packaging
(Global Contact Information/European Contact Information). Should your country not be listed, please
contact the distributor nearest you. A list of distributors can be found in the support area of our
website (www.behringer.com/support).
Registering your purchase and equipment with us helps us process your repair claims quicker and
more efficiently.
Thank you for your cooperation!
6
1. INTRODUCTION
Loading...
+ 12 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.