Behringer B212A, B215A User Manual

User’s manual

Version 1.0 April 2006

EUROLIVE B212A/B215A

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: To reduce the risk of electric shock, do not remove

the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel.

WARNING: To reduce the risk of fire or electric shock, do not

expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure—voltage that may be sufficient to constitute a risk of shock.

DETAILED SAFETY INSTRUCTIONS:

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.

Ventilation:

The appliance should be situated so that its location or position does not interfere with its proper ventilaton. For example, the appliance should not be situated on a bed, sofa rug, or similar surface that may block the ventilation openings: or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

Check the floor:

Always check the floor for stability before you set up the speaker cabinet. Vibrating floors (e.g. elements/components on the stage) do not provide reliable support for speaker stacks. So, always set up your speakers on a solid and even support.

Make sure that speaker cabinets are set up properly:

Set up your speaker cabinet at a distance to dance floors or other audience areas, so as to avoid that somebody can knock over a speaker stack.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tipping over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15) CAUTION - These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions unless you are qualified to do so.

EUROLIVE B212A/B215A

EUROLIVE

Processor-Controlled 450-Watt 2-Way PA Speaker System with 12"/15" Woofer and

1.25" Titanium Compression Driver

B212A/B215A

V High-power 450-Watt 2-Way PA sound reinforcement speaker system for live and playback applications

V Ultra-compact lightweight system delivers excellent sound even at extreme sound pressure levels

V Integrated sound processor for ultimate system control and speaker protection

V Extremely powerful 12''/15" long-excursion driver provides incredibly deep bass and acoustic power

V State-of-the-art 1.25'' titanium-diaphragm compression driver for exceptional high-frequency reproduction

V Ultra-wide dispersion, large-format exponential/conical horn

V Ultra low-noise Mic/Line Input with Volume control and CLIP LED

V Dedicated 2-band EQ for perfect sound adjustment

V Additional Line Out connector allows linking of additional speaker systems

V Versatile trapezoidal enclosure design allows different positioning:

- Stand mounting with 35-mm pole socket

- Tilts on its side for use as a floor monitor

V Ergonomically shaped handles for easy carrying and setup

V High-quality components and exceptionally rugged construction ensure long life

V Conceived and designed by BEHRINGER Germany

+ 5 hidden pages