Beckett GENISYS 52040 User Manual
PARTS & ACCESSORIES
GeniSys Universal Solutions Product Sheet
Product Description
The Beckett GeniSys™ Advanced Burner Control is a 120 Vac primary safety control for residential and light commercial oil burners used
in boiler, furnace, and water heater applications. The GeniSys is used with a suitable cad cell fl ame sensor to control the oil burner motor,
igniter, and optional solenoid valve. It has 24 Vac thermostat terminals (if applicable) compatible with both mechanical and many power
stealing thermostats. It can provide interrupted or intermittent duty ignition, and it has a 15-second lockout time.
Features & Benefi ts
Sleek, modern design
Thermostat and boiler control compatible
•
Customizable pre-time and post-time
•
Three status lights for system monitoring and diagnostics
•
Welded relay protection with redundant motor relays
•
Limited reset and limited recycle
•
Your Universal Control Solution:
•
Technician Pump Prime mode
•
5-Year Warranty
•
Two communication ports for adding alarm contacts,
•
programming display, and/or future wireless communications
GeniSys Contractor Tool
52082
A/C Ready Kit
51950
GeniSys Display
52067
GeniSys Control
7505
GeniSys
Lockout Alarm
52040
GeniSys Control Kit
52097
GeniSys Docking Station
52049
To learn more, see www.beckettcorp.com or ask for literature pt. nos. 61669 & 61687
GeniSys Control Cross-Reference Chart
Beckett
GeniSys Control
Part No.
7505A 0000
7505B 1500 15 sec 15 sec - R7184B -
7505P 1515 15 sec 15 sec 15 sec R7184P, R7184U
7505P 1530 15 sec 15 sec 30 sec R7184P, R7184U
7505P 152M 15 sec 15 sec 2 min R7184P, R7184U
1) Beckett snap-in alarm module required for direct replacement of the control.
2) Valve-on delay and motor-off delay timings on all models are programmable with Beckett snap-in programming display. Other factory set timings are available.
Contact Beckett for alternate timings.
Lockout
Time
15 sec - - R7184A, R8184G
GeniSys Display,
Valve-on
Delay
Time
2
Motor-off
Delay
2
Time
Replaces
Honeywell:
48245, 40200 42230,
1
1
1
52067U
Replaces
Carlin:
50200
60200
60200
60200
1
1
1
1
The GeniSys Display enables the contractor to access the advanced features of the
GeniSys Burner Control. It communicates the current status and last fi fteen cycles of
history for ease of diagnostics. The Tool also allows the contractor to program the pretime and post-time delay timings, making the GeniSys a universal control.
GeniSys Contractor Tool, 52082U
The GeniSys Contractor Tool, with its sturdy shock absorbing design, is made for the
contractor’s toolbox. The Tool provides the same functions as the GeniSys Display.
GeniSys Lockout Alarm, 52040U
The GeniSys Lockout Alarm provides dry contacts for use with an alarm system
requiring contact closure in the event of a soft or hard lockout of the GeniSys Control.
A/C Ready Kit, 51950U
The A/C Ready Kit adds air conditioning capability to an existing furnace or boiler.
GeniSys Docking Station, 52049U
The GeniSys Docking Station provides the ability to give power to the GeniSys
Control when it is not attached to a burner. The Docking Station is also a great training
tool giving the ability to simulate burner operation.
GeniSys Universal Control Kit, 52097U
Beckett has combined all of the accessories for the GeniSys control into a convenient
and durable toolbox. Stock the GeniSys Universal Control Kit on your truck and you
can replace almost any burner primary control on the market. Included in the Kit are:
(2) GeniSys Advanced Burner Controls, (1) GeniSys Contractor Tool – programming
and diagnostic tool, (1) GeniSys Lockout Alarm – snap on module to provide dry
contacts, (1) AC Ready Kit – burner mounted kit to add AC to a furnace or boiler.
Form No. 61714 R03, Printed in the USA 08/10
Loading...