Becker BLU-BKR23 Quick Start Installation Manual

Courtesy of:DiscountCarStereo.com

BLU-BKR23

Quick Start Installation Guide for Motorola Bluetooth

Kits to Becker CDR23/24 Radios

Created October 1, 2015

Revised: March 3, 2019

Introduction:

The BT-BKR23M Bluetooth harness is designed exclusively to install select
Motorola Bluetooth Car Kits to Becker CDR-23/24 Radios
option. These Radios are typically found in Porsche 986 and 997 (BE6611, BE6612,
BE6627) and Chrysler Crossfire. The BT-BKR23M must be used in conjunction with
Motorola harness included in kit (will not work as standalone)

See Frequently Asked question at the end of this guide for more details.
Installation:

Fig. 2

Remove radio from the dashboard to gain access to the connectors. A pair of

removal tools (See Fig. 1) is required to remove all Becker radios.

Fig. 1

Radio Removal Keys

1. Slide tools into slots to detent position. Withdraw the radio by pulling

outwards on the tools. See Fig. 2

2. With radio removed disconnect the Green (C-2) from Radio (See Fig. 3 )

Fig. 3

Becker Radio Connectors

3. Connect Green ISO plug from installation harness (See Fig. 4) into the C-

2 slot on Radio