
Comfort Plus
TM
SET-UP INSTRUCTIONS
Thank you for your recent purchase. Please register your product online today at
www.boydsleep.com/register
TM
Please read all instructions for Comfort Plus
Carefully unpack contents of carton.
1.
Remove Comfort Plus
2.
Place mattress in unobstructed area free of sharp objects and unfold.
3.
NOTE: Read separate
4.
Plug inset pump into a
TM
from its convenient duffel bag.
Attached Pump instructions prior to operation.
grounded 120 volt AC
electrical outlet (a).
a.
Inflate Comfort Plus
6.
TM
mattress to full capacity. To avoid stretching or bulging
and Simmons® Attached Pump prior to inflation.
Inflate mattress by turning knob from off
5.
position to inflate position (b). Ensure that
the dial clicks into the “INFLATE” position.
b.
do not overinflate. DO NOT LEAVE PUMP UNATTENDED.
7.
After mattress is fully inflated turn
knob back to off position (c).
Ensure that the dial clicks into the “OFF”
position and arrow is pointing to “OFF”
to prevent loss of air.
c.
c.
To achieve desired firmness level, lie
8.
on the Comfort Plus
TM
mattress and turn
mattress knob slowly towards the deflate
position (d). (If too much air escapes,
turn knob to inflate position.)
d.
NOTE: Do not turn knob all the way to the deflate
position or mattress will begin deflation process
If the Comfort Plus
9.
10.
Your Comfort Plus
and bedding.
TM
requires adjustment, repeat step 8.
TM
is now ready to use. Make up bed as desired with sheets
TO DEFLATE AND STORE
Plug pump into a grounded 120 volt AC electrical outlet (a).
1.
When mattress is completely deflated
Deflate mattress by turning knob
2.
from stop position to deflate
position (e). Ensure that the dial
clicks into the “DEFLATE” position.
e.
4.
The Comfort Plus
5.
Roll and place Comfort Plus
TM
mattress is now ready for storage.
TM
WARNING: Attached Pump will burn out if left in “deflate” position after mattress
is deflated. Monitor deflation progress. DO NOT LEAVE PUMP UNATTENDED.
Thank you for purchasing the Comfort PlusTM. To help us serve you best, please take a moment to complete
b.
g.
the information below. Cut on dotted line and mail this important card to validate your warranty registration.
Ms.
Mr.
Mrs.
q
q
Name of store where purchased:
1. Check the 3 most important reasons influencing your purchase of the Comfort Plus
Product packaging
q
A product feature
q
Purpose and style
q
Convenience
q
Quality and durability
q
2. Check the reason you purchased
Comfort Plus
3. Who will use the Comfort Plus
4. How often will you or someone else use the Comfort PlusTM?
5. Do you intend to use the Comfort Plus
6. What is your present income level?
*This bed is warranted as a temporary sleep surface. Please refer to opposite side under Comfort Plus
Miss
q
TM
q
email
Warranty and service
q
TV Advertisement
q
Magazine advertisement
q
Newspaper advertisement
q
In-store display
q
Gift
q
Travel
q
TM
as an extra bed?
TM
to replace your own current sleep surface?*
under $15,000
q
$50,000-$75,000
q
First
3.
turn knob to off position (f).
Ensure that the dial clicks into the “OFF”
position and arrow is pointing to “OFF”.
f.
mattress in the convenient duffel bag.
Please print
Address
q
q
School
Health
q
M.I.
(
q
q
Guests
q
)
Cell Phone
Date of purchase:
Prior experience
q
Received as gift
q
Recommendation of family/friend
q
Recommendation of salesperson
q
Value for price
q
Comfort
Convenience
Children
q
q
Weekly
Daily
q
q
q
q
Last
-
TM
Vacation
Other
Yourself
Monthly
q
$15,000-$25,000
q
$75,000-$100,000
q
$25,000-$50,000
q
over $100,000
q
TM
/
Month/Day/Year
q
Yes
q
“USES”.
/
Other
No

LIMITED 3 YEAR WARRANTY
Comfort Plus
indoor temporary sleeping purposes, that the mattress will be fully guaranteed against defects in material and
workmanship for a period of 3 months from the date of purchase, provided further that the
has been operated and cared for according to the provided instructions and uses. Warranty does not cover
punctures caused by misuse.
If defect occurs in months 4 - 12 from the original purchase date the manufacturer will offer a credit of 50% of the
current manufacturer’s Suggested Retail Price for the mattress. This credit is to be applied towards the purchase of
a replacement
to ship the replacement mattress are the responsibility of the consumer.
The pump is guaranteed to the original purchaser against defects in materials and workmanship for a period of 36
months from the date of original purchase provided that the pump has been operated according to the provided
instructions. If defect in the pump occur in months 4 - 36 from the original purchase date, the manufacturer will
offer a credit of 50% of the current manufacturer’s Suggested Retail Price. This credit is to be applied towards the
purchase of a replacement mattress directly from the original manufacturer. Shipping and handling charges to ship
the replacement are the responsibility of the consumer.
Our obligation under this warranty shall be limited to the repair or exchange of any part which may prove
defective under the conditions and during the periods described above.
This warranty shall not apply if upon inspection we find:
1. Any product or part has been damaged by alteration.
2. Any product or part has been subject to accident, misuse, abuse or has been operated
contrary to the provided instructions or uses.
To submit a request for warranty replacement go to www.expressbedshelp.com and follow the detailed
instructions on how to process a warranty claim. A copy of the Original Receipt is required as proof of purchase
that validates the warranty.
This is the entire exclusive express limited warranty. The manufacturer neither makes nor is responsible for any
other warranties, either expressed or implied, including those of retailing dealers. Any and all liability for breech
of warranty, as well as damages for incidental, special or consequential losses are expressly denied.
TM
warrants to the original purchaser only when the Comfort Plus
Comfort Plus
This warranty applies only to product(s) purchased from an authorized retailer.
TM
mattress directly from the original manufacturer. Shipping and handling charges
TM
is used for normal
Comfort Plus
Affix
postage
here.
CARE AND MAINTENANCE
Mattresses are constructed of heavy duty vinyl designed for optimum comfort when
used at normal household temperatures.
TM
WARNING:
Avoid extreme cold, as vinyl will become brittle. Do not overinflate.
Do not use high pressure or compressed air inflation systems.
Avoid sharp objects. Do not use hair dryer to inflate.
WARNING: FLAMMABLE
VINYL IS FLAMMABLE. Do not locate bed near fire, fireplace or any
other heat source, such as a space heater. Avoid placing bed over
a heat emitting floor vent.
PVC, the material used to make air mattresses, will naturally stretch and expand
during use. After being inflated for several hours and/or having been slept on, the
air mattress may lose some of its initial firmness and feel softer because the PVC
has naturally expanded. This expansion is normal and not the result of a leak. To
regain your desired firmness level, add air to the mattress using the pump that was
provided with the mattress.
Clean only with mild soap and water. Harsh cleaners can damage materials. Use
repair kit to patch any holes, tears or punctures. Store at room temperature only
AFTER cleaned and dried. Do not store outdoors or in a garage.
Use the Comfort Plus
The Comfort Plus
TM
any time an extra temporary sleep surface is needed.
TM
is intended for normal indoor use only. The Comfort Plus
is not intended to be used in place of your present everyday sleep surface.
USES
TM
Comfort Plus
TM
2440 Adie Road
St. Louis, MO 63043