B&C Speakers DCM36 User Manual

DCM36

MF Drivers

160 W continuous program power capacity

1.4” horn throat diameter

400 – 11000 Hz response

108.5 dB sensitivity

Neodymium magnet assembly

LF Drivers LF Nd Drivers Coaxials HF Drivers Horns

Specifications

Throat Diameter (1) 36 mm (1.4 in)
Nominal Impedance 8 ohm
Minimum Impedance 8 ohm
Nominal Power Handling (2) 80 W
Continuous Power Handling (3) 160 W
Sensitivity (1W/1m) (4) 108.5 dB
Frequency Range 0.4 -11 kHz
Recommended Crossover (5) 400 Hz
Voice Coil Diameter 51 mm (2 in)
Winding Material Aluminium
Inductance 0.18 mH
Diaphragm Material Composite
Flux Density 2.1 T

Mounting and Shipping Info

Four M6 holes 90° on 102 mm
(4 in) diameter
Overall Diameter 152 mm (6 in)
Depth 108 mm (4.25 in)
Net Weight 3.1 kg (6.8 lb)
Shipping Weight 3.3 kg (7 lb)

Shipping Box 170x170x140 mm

1

Driver mounted on 320 Hz exponential horn

2

2 hours test made with continuous pink noise signal (6 dB crest factor)
within the specified range . Power calculated on rated minimum
impedance.

3

Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.

4

Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.

5

12 dB/oct. or higher slope high-pass filter.

(6.7x6.7x5.5 in)