BC Biomedical Endocheck User Manual

User Manual

ENDOCHECK™

Test System

CONTENTS

I. INTRODUCTION............................................................... 2

II. SPECIFICATIONS ............................................................ 3

III. RECEIPT, INSPECTION & RETURN................................ 4

IV. USE OF THE ENDOCHECK™ TEST SYSTEM ............... 5

V. APPLICATIONS................................................................ 6

VI. WARRANTY ..................................................................... 7

VII. TECHNICAL SUPPORT ................................................... 7

I. INTRODUCTION

EndoCheck™ Features

The EndoCheck™ Test System is a portable kit designed for qualitative and quantitative testing of
light sources and fiber light cables used in a rigid endoscopy environment, and is intended to be used
by trained service technicians. The kit does not check rigid endoscopes – only fiber cables & light
sources.

There are two primary parts to the kit:

• The EndoProjector ™ is a precision optical component that yields an approximately 10X
magnification of the light signal coming out of the fiber cable. The image, when displayed on
a wall or other flat surface, generally allows the individual fibers to be observed, and thus
make a qualitative inspection of the fiber cable. The EndoProjector ™ also provides for
connection to a wide variety of fiber cables via its interchangeable connectors.

• The 401025 light meter and light meter adapter, in conjunction with the EndoProjector ™,
provide for quantitative analysis of both the light source and the fiber cable. The light meter
reads in both lux and foot-candles.

2