BBK DW9917K, DW9918K Service Manual

DW9918K

service manual

Catalog

Chapter One About Maintenance

1.1 Safety precautions

1.1.1 Power supply

1.1.2 Precautions for antistatic

1.1.3 Precautions for laser head

1.1.4 About placement position

1.2 Maintenance method

1.2.1 Visualized method

1.2.2 Electric resistance method

1.2.3 Voltage method

1.2.4 Current method

1.2.5 Cutting method

1.2.6 Element substitution method

1.2.7 Comparison method

1.3 Required device for maintenance

Chapter Two Functions and Operation Instructions

2.1 Features

2.2 BASIC INFORMATION

2.2.1 Illustration of the Front Panel

2.2.2 Illustration of the Rear Panel

2.2.3 Illustration of the VFD

2.2.4 Illustration of the Remote Control

2.2.5 Accessorles

2.3 SYSTEM SETUP

2.3.1 Operation Interiace and General Steps

2.3.2 General Setup

2.3.3 Screen Saver Setup

2.3.4 Porgressive /Interlaced Setup

2.3.5 SCART Output Setup

2.3.6 Video Output Format Setup

2.3.7 Restore Factory Settings

2.3.8 Playback Settings

2.3.9 TV Aspect Ratio

2.3.10 Rating Level Setup

2.3.11 Digital Audio Output Setup

2.3.12 Analog Audio Output Setup

2.3.13 Record Setup

2.3.14 Auto Chapter Marker Setup

2.3.15 Default Input Signal

2.3.16 Default Recording Quality Selection

2.3.17 Language Setup

2.3.18 OSD Language Setup

2.3.19 DVD Menu Language Setup

2.3.20 DVD Subtitle Language Setup

2.3.21 DVD AUDIO Language Setup

2.3.22 Channel Tuning

2.3.23 Auto Scan Channels

2.3.24 Modify channel Information

2.3.25 M o d i f y C h a n n e l Information (CONTINUED)

2.3.26 Modify Channel Information(CONTINUED)

2.3.27 Sort Channel Order

2.3.28 System Clock Setup

2.3.29 System Clock Setup (CONTINUED)

2.4 RECORDING MODE

2.4.1 Summarization

2.4.2 How to Receive the TV Program

2.4.3 Viewing the Input Source

2.4.4 Manual Recording

2.4.5 Manual Recording (CONTINUED)

2.4.6 One Touch Recording (OTR)

2.4.7 To Control the DV Camera system will cancel the OTR.

2.5 TIMER TASK SETTING

2.5.1 Summarization

2.5.2 Operation Steps (CONTINUED)

2.5.3 Operation Steps (CONTINUED)

2.5.4 To Browse the Contents of the Disc and Select one Title to Play

2.5.5 Erasing Title

2.5.6 Edit Title

2.5.7 Rename Title

2.5.8 Overwrite Title / Append Title / Overwrite Disc

2.6 EDITING MODE

2.6.1 Summarization

2.6.2 Entering the Editing Mode

2.6.3 Menu Explanation

2.6.4 Operation Steps

2.6.5 Selecting the Title /Chapter to be Edited (CONTINUED)

2.6.6 Insert Chapter Marker

2.6.7 Hiding / Unhiding Chapter

2.6.8 Changing the Index Picture

2.6.9 Split Title

2.6.10 Exiting the Editing Mode

2.7 DISC OPERATION MODE

2.7.1 Summarization

2.7.2 Entering the Disc Operation Mode

2.7.3 Operations

2.7.4 Exiting the Disc Operation Mode

2.8 PLAYBACK MODE

2.8.1 Entering the Playback Mode

2.8.2 Playback from the Menu Displayed

2.8.3 Playback from the Titles Displayed

2.8.4 Ending Playback

2.8.5 Playing Mode Control

2.8.6 Playing Mode Control (CONTINUED)

2.8.7 Playback Process Control

2.8.8 Title/Chapter/Track Selection

2.8.9 Audio / Subtitle Selection

2.8.10 Angle Selection

2.8.11 PBC ON/OFF

2.8.12 T-Time/Tr-Time Display

2.8.13 The Operations of Function Buttons

2.8.14 Playing JPEG/MP3/CD/DivX Disc

2.8.15 Playback Control Menu

2.8.16 Control Wipe Mode when Playing JPEG Disc

2.8.17 Control Zoom Mode when Playing JPEG Disc

2.8.18 Picture Rotating when Playing JPEG Disc

2.9 USB MODE

2.9.1 Summarization

2.9.2 Operations

2.9.3 Exiting the USB mode

2.10 SPECIFICATIONS

Chapter Three Unit Circuit Principle

Section One Principle of the Player

3.1.1 PCB board composition figure and video signal figure

3.1.2 Block diagram of the player

3.1.3 Introduction to IC used by this player

Section Two Unit Circuit Principle

3.2.1 System control and code, decode circuit

3.2.2 Audio output circuit

3.2.3 Video output circuit

3.2.4 Audio input circuit

3.2.5 Video input circuit

3.2.6 Reset circuit

3.2.7 IIC bus control circuit

3.2.8 Voltage regulating circuit

3.2.9 USB jack circuit

3.2.10 DV jack circuit

3.2.11 Loader jack circuit

3.2.12 Control panel

3.2.13 AV circuit

3.2.14 MIC circuit

3.2.15 Power circuit

Section Three Servicing Cases

3.3.1 Servicing cases

3.3.2 Troubleshooting flow chart

Section Four Servicing Parameters

3.4.1 Signal waveform diagram

3.4.2 Key point voltage

Section Five Function Introduction to IC

3.5.1 function introduction to MT 8602

3.5.2 Function introduction to Cd4053

3.5.3 function introduction to TSB41AB1

3.5.4 function introduction to M13S128168A

3.5.5 Function introduction to CD4052

3.5.6 function introduction to TVP5150A

3.5.7 function introduction to 16316-52

3.5.8 function introduction to SN74LVC16373

3.5.9 function introduction to MSP 34x5G

3.5.10 function introduction to TPS2041A

3.5.11 function introduction to Lp2995

104

105

110

113

114

107

109

121

123

125

3.5.12 function introduction to FSDM0565R

3.5.13 Function introduction to M41T80

3.5.14 function introduction to Em6353

3.5.15 function introduction to KA5H0380R

3.5.16 function introduction to 74HC/HCT14

Chapter Four Disassembly and Assembly Process

Section One PCB board

5.1.2 Bottom layer of AV OUT Board

5.1.3 Surface layer of DECODE&DECODE &SERVO Board

5.1.4 Bottom layer of DECODE&SERVO Board

Chapter Cinque PCB board & Circuit diagram

5.1.1 Surface layer of AV OUT Board

5.1.5 Surface layer of KEY SCAN Board

125

126

127

128

129

130

131

132

133

134

135

5.1.6 Bottom layer of KEY SCAN Board

5.1.7 MIC Board

5.1.8 POWER Board

136

137

138

Section Two circuit diagram

139

5.2.1 MPEG&SERVO Board

5.2.2 AV Board

5.2.3 DV Board

5.2.4 USB Board

5.2.5 MIC Board

5.2.6 KEY SCAN Board

5.2.7 POWER Board

Chapter six BOM List

139

150

158

159

160

161

162

164

Chapter One About Maintenance

1.1 Safety precautions

1.1.1 Power supply

When maintenance personnel are repairing DVD players, he should pay special attention to the

power board with 220V AC and 330V DC which will cause hurt and damage to persons!

1.1.2 Precautions for antistatic

Movement and friction will both bring static electricity which causes serious damages to integrated

IC. Though static charge is little, when a limited quantity of electric charge is added to large-

scaleintegrated IC, as the capacitance is very small in the meantime, now the integrated IC is very much

easy to be struck through by static electricity or the performance will decrease. Thus static electricity

prevention is of extraordinary importance. The following are several measures to prevent static

electricity:

1. Use a piece of electric conduction metal with the length of about 2 metres to insert into the earth,

and Fetch the lead wire from the top of the surplus metal and connect to the required static electricity

device. The length and depth of the metal embedded under the earth should be determined according to

the wettability of the local soil. For humid places, it may be shorter, and longer and deeper for dry places.

If possible, it can be distributed and layed in terms of “#” shape.

2. On operating table-board, the antistatic table cushion should be covered and grounded.

3. All devices and equipments should be placed on the antistatic table cushion and grounded.

4. Maintenance personnel should wear antistatic wrist ring which should be grounded.

5. Places around the operating position should also be covered with electric conduction cushion or

Painted with antistatic paint.

1.1.3 Precautions for laser head

1. Do not stare at laser head directly, for laser emission will occur when laser head is working, which

will Hurt your eyes!

2. Do not use wiping water or alcohol to clean laser head, and you may use cotton swab.

- 1 -

1.1.4 About placement position

1. Never place DVD player in positions with high temperature and humidity.

2. Avoid placing near high magnetic fields, such as loudspeaker or magnet.

3. Positions for placement should be stable and secure.

1.2 Maintenance method

1.2.1 Visualized method

Directly view whether abnormalities of collision, lack of element, joint welding, shedding welding,

rosin joint, copper foil turning up, lead wire disconnection and elements burning up among pins of

elements appear. Check power supply of the machine and then use hands to touch the casing of part of

elements and check whether they are hot to judge the trouble spot. You should pay more attention when

using this method to check in high voltage parts.

1.2.2 Electric resistance method

Set the multimeter in resistance position and test whether the numerical value of resistance of each

point in the circuit has difference from the normal value to judge the trouble spot. But in the circuit the

tested numerical value of resistance is not accurate, and the tested numerical value of integrated IC's

pins can only be used for reference, so the elements should be broken down for test.

1.2.3 Voltage method

Voltage method is relatively convenient, quick and accurate. Set the multimeter in voltage position

and test power supply voltage of the player and voltage of a certain point to judge the trouble spot

according to the tested voltage variation.

1.2.4 Current method

Set the multimeter in current position and test current of the player of a certain point to judge the

trouble spot. But when testing in current method, the multimeter should be series connected in the

circuit, which makes this method too trivial and troublesome, so it is less frequently used in reality.

1.2.5 Cutting method

Cutting method should be combined with electric resistance method and voltage method to use.

This method is mainly used in phenomena of short circuit and current leakage of the circuit. When

cutting the input terminal voltage of a certain level, if voltage of the player rises again, it means that the

trouble lies in this level.

- 2 -

1.2.6 Element substitution method

When some elements cannot be judged good or bad, substitution method may de adopted directly.

1.2.7 Comparison method

A same good PC board is usually used to test the correct voltage and waveform. Compared these

data with those tested through fault PC board, the cause of troubles may be found.

Through the above maintenance method, theoretical knowledge and maintenance experience, all

difficulties and troubles will be readily solved.

1.3 Required device for maintenance

Digital oscillograph ( 100MHE)

TV set

SMD rework station

Multimeter

Soldering iron

Pointed-month pincers

Cutting nippers

Forceps

Electric screw driver

Terminals connecting cord

Headphone

Microphone

- 3 -

Chapter Two

Functions and Operation Instructions

2.1 Features

# Utilizes MPEG- Real-Time encoding and decoding technology, capable of directly recording TV and

external program sources on to DVD+R, DVD+ RW discs # Capable of recording your favorite video tapes into DVD # Built-in DV (i. LINK/IEEE1394) input jack enables high fidelity digital recording of digital video camera

signals # Progressive scan capable of producing stable and clear pictures without flickering, # Built-in 5.1CH Dolby Digital surround decoder, separate 5.1CH outputs, 2CH Dolby outputs, optical

and coaxial outputs for digital audio # 24bit audio DAC capable of producing perfect acoustic fidelity # With normal DVD playback function, capable of playing DVD, SVCD, VCD, CD, MP3, JPEG, DivX

DVD+R and DVD+RW discs # Recorded discs playable on normal DVD players # Capable of recording up to 6 hours of video on single-sided discs DVD+R/DVD+RW (4.7GB) # Supports 4 recording modes: HQ, SP, EP, SLP # OTR function enables one-touch recording, convenient to select the length of recording time # Manual/automatic insertion of chapter mark # Features chapter hiding, disc locking to the recorded discs (DVD+RW) and titles renaming # Title index pictures of recorded disc (DVD+RW) are freely selectable # Multi-dubbing, multi-angle, multi-subtitle for selection # Built-in TV tuner with automatic channel scanning # AV input S-Video, DV (i. LINK/IEEE1394) and antenna input conveniently located on both the front

and rear panels, to record various program sources # Supports composite video, component/progressive-scan video output terminals and TV antenna

output terminals # Built-in USB jack, capable of playing JPEG, MP3 file # Intelligent preset timer recording function makes you won't miss any wonderful programs # Recording and output system supports both PAL/NTSC systems # Wide range of operating power supply: ~100V 240V, 50/60Hz, standby power consumption 3W # Intelligent software upgrading capability # Dual SCART: one for input, another for output # Dual Kara OK function

2.2 BASIC INFORMATION

2.2.1 lllustration of the Front Panel

- 4 -

6 7

STANDBY indicator

STANDBY/ON button

MICPHONE 1

MICPHONE 2

VOL KNOB

Disc tray

OPEN/CLOSE button

Infrared remote sensor

VFD display window

PLAY button

PAUSE button

STOP button

REC button

SOURCE button

CH+button

CH- button

USB input terminal

DV input terminal

Front AV input terminal

Open the terminal

protection cover here

# The function of buttons on the front panel is the same with that of the corresponding ones on the

remote control. # The input terminals on the front panel can only be seen when the protection cover is opened

2.2.2 Illustration of the Rear Panel

TV TUNER input terminal

# The antenna cable plug is inserted here

TV TUNER output terminal

# This terminal is directly connected with the

TV TUNER Input Terminal inside this unit

Rear COMPOSITE Video input terminal

Rear S-Video input terminal

L/R channel audio input terminals

5.1CH output terminals

2.2.3 Illustration of the VFD

The look of VFD is shown as the following figure:

REC

SVCD MP3 PBC

- 5 -

L/R channel audio output terminal

COMPOSITE VIDEO out terminal

S-VIDEO output terminal

COMPONENT VIDEO output terminal

COAXIAL output terminal

OPTICAL output terminal

CVBS/ RGB and audio output terminal

CVBS and audio input terminal

SYSTEM SETUP - GENERAL

Screen saver

Progressive/Interlaced

SCART output

Video output format

Restore factory settings

General Setup

System Setup Menu

Interlaced

RGB

PAL

SYSTEM SETUP - GENERAL

Screen saver

Progressive/Interlaced

SCART output

Video output format

Restore factory settings

Interlaced

RGB

PAL

General Setup

General Setup Menu

SYSTEM SETUP - GENERAL

Screen saver

Progressive/Interlaced

SCART output

Video output format

Restore factory settings

General Setup

Interlace

OFF

RGB

PAL

4.You can also keep on pressing [IS/PS] button

for 3 seconds to perform the Progressive /

Interlaced switching. # The value of this setting must accord with the

scanning mode of the TV, otherwise the TV

screen will display Nothing. # If nothing is shown on the TV screen, you may

try to keep on pressing [IS/PS] button for 3

seconds. # To avoid instability of output signal, please

don't perform Progressive/Interlace

function by component(Y,Cb/Pb, Cr/Pr)

terminal on the rear panel when "SCART

output" item is RGB.

SYSTEM SETUP - GENERAL

Screen saver

Progressive/Interlaced

SCART output

Video output format

Restore factory settings

Interlaced

Progressive

YCbCr

Interlaced

PAL

2.3.5 SCART Output Setup

1.In general setup menu, highlight "

output

", and press [SELECT] button, and then

a list will appear.

2.Select "YCbCr" or "RGB" in the list. # When using component video output, please

select "YCbCr".

# When using SCART output, you may select

according to the fact .But you had better select the "RGB".

# This setup does not affect the composite video

output.

3.Press [SELECT] button to confirm.

SCART

requirements.

3.Press [SELECT] button, and then the system will switch the output format to what you select right now.

# You can switch the TV output format by

pressing the [PAL/NTSC] button too.

# Changing the output format may cause no

picture on the TV screen. If this happens, you can press [PAL/NTSC] button to restore the output format.

SYSTEM SETUP - GENERAL

Screen saver

Progressive/Interlaced

SCART output

Video output format

Restore factory settings

General Setup

Interlaced

RGB

PAL

NTSC

PAL

2.3.7 Restore Factory Settings

1.Select "Restore factory setting" by [5],

[6]buttons in the general setup menu, then press[SELECT] button, and the TV screen displays:

2.Highlight "OK" in the menu by [3], [4] buttons.

3.Press [SELECT] button to make all setup

items restore the factory settings.

# When your unit is in abnormal working mode, it

is probably caused by your wrong setup. Please try the "Restore Factory Settings" operation to make it work normally.

Restore factory settings

System will reset all the setup items to the default values, OK to confirm, Cancel to exit.

Cancel

SYSTEM SETUP - GENERAL

Screen saver

Progressive/Interlaced

SCART output

Video output format

Restore factory settings

Interlaced

RGB

YCbCr

Germany

France

RGB

2.3.6 Video Output Format Setup

This unit has two video output systems: PAL and NTSC . You can select one of them according to your TV set specs.

1.Highlight "Video output format" in the general

setup menu and press [SELECT] button. A pop-up menu will appear.

2.Select the proper option according to factual

2.3.8 Playback Settings

1.Display the system setup control menu.

2.Move the cursor by [5],[6] buttons to select “ " item .

3.Press [SELECT] button to enter the playback setup mode. The right figure is the main menu of playback setup.

SYSTEM SETUP - PLAYBACK

TV aspect ratio

Rating level

Digital audio output

Analog audio output

the main menu of playback setup

- 8 -

Letter Box

OFF

RAW

5.1 CH

2.3.9 TV Aspect Ratio

1.In the playback setup menu, select item "TV aspect ratio" by[5], [6] buttons, press [SELECT] button and then the value list will appear, which is shown as the right figure.

2.Select the suitable value by using [5], [6] buttons, and then press [SELECT] button.

# The meaning of each value to be selected of

this item is as follows:

# 16 : 9: Applicable to wide screen TV set. # Pan Scan: Suitable for the common size TV set.

When playing wide screen pictures, left and right edges of the original pictures are cut off. The picture will be displayed to full screen.

# Letter Box: Suitable for the common size TV

set. When playing wide screen pictures, black banners will appear on the top and bottom of the TV set.

3.Press [RETURN] button to return to the previous menu and proceed other settings.

SYSTEM SETUP - PLAYBACK

TV aspect ratio

Rating level

Digital audio output

Analog audio output

Letter Box

16:9 Pan Scan

Letter Box

RAW

5.1 CH

2.Input the password and press [SELECT] button.If the password is right, the TV screen displays the window shown as the right figure.The super password is 3308.

Set Rating Level

OFF

New password

NEW

3.Select "Set rating level" , and press [SELECT] button to display the pop-up list which is shown

Set Rating Level

OFF

English

8: Adult

NEW

4.Select the rating level by [5], [6] buttons and press [SELECT] button to confirm.

5.If you do not want to change the original password, highlight the "OK" in the menu through cursor buttons and then press [SELECT] button.

6.To change the password, please highlight the "New" in the above figure and press [SELECT] button. Now the TV screen will display:

Notes

# The playback effect is related to the playing

disc.If a disc is recorded in the aspect ratio of 4:3, the ratio can only be 4:3, no matter which screen setting you select.

# This setting should conform to the aspect ratio

of the TV set.

2.3.10 Rating Level Setup

By setting this unit's authorization rating and password, some discs with control grade cannot be played without inputting the password. In this way, you can confine the children to watch the disc unsuitable to them.

1.In the playback setup menu, move the cursor

upand down by [5] , [6] buttons to select the item "Rating level", and then press [SELECT] button. The TV screen displays:

Enter Password

Cancel

New Password

New password

Confirm password

Cancel

7.Select "New password" by the cursor buttons and input the new password by number buttons.

8.Select "Confirm password" by the cursor buttons and input this password again by number buttons.

# The input password in the "New password "

must accord with that in the "Confirm password".

9.Highlight "OK" by cursor buttons and then press [SELECT] button.

# After setting the rating level, when playing the

disc with the rating level higher than what you have set, you must input the password.

# If you forget the password, you may input the

super password.

2.3.11 Digital Audio Output Setup

This unit has digital audio output jacks. So you can enjoy the higher quality audio with an amplifier with digital audio decoders.

- 9 -

1.Access the playback setup menu. Select item “Digital audio output" by [5], [6]buttons, and then press [SELECT] button. A list will pop up:

2.Select the proper value by [5], [6]

RAW :This unit doesn't perform

LPCM: This unit performs decoding

SYSTEM SETUP - PLAYBACK

TV aspect ratio

Rating level

Digital audio output

Analog audio output

Letter Box

OFF

RAW

OFF LPCM

2.3.12 Analog Audio Output

Setup

This setting is used to select an analog audio output format between 2CH analog mix audio output and Dolby 5.1 CH analog output.

1.Select "Analog audio output" item by [5], [6]

buttons, and press [SELECT] button, then a pop-up list will appear:

2.Select the desired value by [5], [6] buttons

then press [SELECT] button to confirm.

SYSTEM SETUP - PLAYBACK

TV aspect ratio

Rating level

Digital audio output

Analog audio output

Letter Box

OFF

RAW

5.1 CH

2 CH

2.3.13 Record Setup

After finishing the settings introduced in this chapter, when recording, the values you set will become the default values of the correlative items.

1.In the system setup control menu, select item

" " by [5], [6] buttons and then press [SELECT] button to enter record setup menu. The screen displays:

SYSTEM SETUP - RECORD

Auto chapter marker

Default source

Default quality

the record setup menu

Note

5 minutes

Tuner

# If the TV screen displays " ", when

pressing [5]/[6]button, it may indicate that the current activated menu will not be the system setup control menu. Please press [RETURN] button once or more to activate the system setup control menu.

2.3.14 Auto Chapter Marker Setup

1.In the record setup menu, select item "Auto chapter marker" by [5], [6] buttons, press [SELECT] button, and then a pop-up menu will appear:

2.Select the proper value by [5], [6] buttons, and then press [SELECT] button to confirm.

# This setup is used to make sure whether insert

the chapter marker automatically when recording.

# If you don t set this item to "OFF", the

recorded contents will be automatically divided into some chapters with the same length according to the interval time you`ve selected.

SYSTEM SETUP - RECORD

Auto chapter marker

Default source

Default quality

5 minutes 5 minutes

Tuner

10 minutes

2.3.15 Default Input Signal

Sources Selection

1.In the record setup menu, select "Default source" by [5], [6] buttons and press [SELECT] button, then a pop-up menu will appear:

2.Select the desired value by [5], [6] buttons and then press [SELECT] button.

SYSTEM SETUP - RECORD

Auto chapter marker

Default source

Default quality

# There are several groups of input source ports.

Please refer to the "Basic Information Illustration of the Front/Rear Panel " for their position on the unit.

# Front CVBS: Front panel composite video and

audio inputs.

5 minutes

Tuner

SCART

Tuner

- 10 -

# Rear CVBS: Rear panel composite video and

audio inputs.

# Rear S-VIDEO: Rear panel S-video and audio

inputs. # DV: Front panel DV input. # SCART: Rear panel CVBS and audio inputs. # TUNER: Rear panel TV tuner input.

2.3.16 Default Recording Quality

Selection

1.In the record setup menu, select item "Default

quality" by [5], [6] buttons, press [SELECT]

button, and then a list menu will appear.

2.Select the desired value by [5], [6] buttons,

and then press [SELECT] button. # Please refer to the "TERMS" for the four

different recording qualities: SP, SLP, EP, HQ.

SYSTEM SETUP - RECORD

Auto chapter marker

Default source

Default quality

5 minutes

Tuner

EP SLP

2.3.17 Language Setup

To meet the needs of consumers in different regions, this unit is equipped with many kinds of operation interface languages for your selection.

1.Enter the system setup mode.

2.In the system setup control bar, move the

cursor by [5], [6] buttons. Select item

“ ", and then press [SELECT] button to

enter the language setup menu. The screen displays:

SYSTEM SETUP - LANGUAGE

OSD language

Menu language

Subtitle language

Audio language

the language setup menu

English

OFF

English

2.3.18 OSD Language Setup

1.In the language setup menu, select item "OSD

language" by [5], [6] buttons, press [SELECT] button, and then a list will pop up, which is shown as the following figure:

2.Select your desired language by [5], [6]

buttons, press [SELECT] button to confirm, and then the OSD language will change correspondingly.

SYSTEM SETUP - LANGUAGE

OSD language

Menu language

Subtitle language

Audio language

English

Russian

English

2.3.19 DVD Menu Language Setup

1.In language setup menu, select item "Menu language" by [5], [6] buttons, press [SELECT] button, and then a list will pop up, which is shown as the following figure.

2.Select your desired language by [5],[6] buttons, and then press [SELECT]button.

# If you play the DVD discs that support the

selected language, the system will adopt this language as the DVD menu Language.

# If the disc does not support the selected

language, the system will use the language supported by the disc.

SYSTEM SETUP - LANGUAGE

OSD language

Menu language

Subtitle language

Audio language

English

OFF

Chinese Danish

English

2.3.20 DVD Subtitle Language

Setup

Some DVD discs have many kinds of subtitle languages and this setup is used to set the default DVD subtitle language.

1.In the language setup menu, select item

"Subtitle language" by [5], [6] buttons, press [SELECT] button, and then a list will pop up, which is shown as the following figure:

2.Select your desired language by [5], [6]

buttons, and then press [SELECT] . # "OFF" means closing the subtitle output. # The system will select this setup language as

the DVD subtitle language preferentially. If the

DVD discs you select do not support this

language, this setup is invalid. # You may change the subtitle language at

random when playing. Please refer

to "Playback mode" for details.

SYSTEM SETUP - LANGUAGE

OSD language

Menu language

Subtitle language

Audio language

English

OFF

English

English Chinese

- 11 -

2.3.21 DVD AUDIO Language

Setup

1.In the language setup menu, select item "Audio language" by [5], [6] buttons, press [SELECT] button, and then a list menu will pop up, which is shown as the following figure.

2.Select your desired language by [5], [6] buttons, and then press [SELECT] button.

# The system will use the setup language as the

DVD output language preferentially. If the disc dose not support this setup,the setup is invalid.

# When playing DVD discs, you may change the

output language at random. Please refer to "Playback Mode" for details.

SYSTEM SETUP - LANGUAGE

Notes

OSD language

Menu language

Subtitle language

Audio language

English

OFF

English

Chinese Danish

# About the DVD language setup introduced in

this chapter, some discs have not the language you set, so the setup will be invalid. When playing, the relative languages are the corresponding ones provided by the discs.

# For some DVD discs, when playing, it will

display the language selection menu. If you perform the selection in it, the corresponding setup of this unit will be invalid, and the relative languages are the ones you select.

2.3.22 Channel Tuning

This unit is equipped with a TV tuner, by which you can receive TV signals. Before receiving TV signals, you must proceed tuning operation . The result of the operation will be saved and will not be lost after this unit is switched off.This operation can tune this unit automatically to receive the TV programs.

1.In the System Setup Control menu , highlight

item " " by [5], [6] buttons .

2.Press [SELECT] button, then the SYSTEM

SETUP-CHANNEL SCAN menu will appear, as shown in the following figure.

SYSTEM SETUP - CHANNEL SCAN

Scan channels

Modify channel information

Sort channel order

SCAN

EDIT

SORT

2.3.23 Auto Scan Channels

1.Highlight item "Scan channels", and press [SELECT] button to start channel scanning.

# You can press [STOP] button to stop the

scanning during the operation. If do so, the channel information having been obtained during scanning can also be saved.

# When scanning a channel, the TV will show the

image of this channel's program.

Note

# Before the channel scan operation, you must

connect the system properly to ensure the TV signals can enter the system through the "TV TUNER input" jack. Please refer to "System Connection-System Connection of Recording External Signals" for the connection illustration.

2.3.24 Modify channel Information

Here, you can name the channel after the corresponding program's name or any other name you like, sort the channel order to access the special channel easily, tune the channel finely, and scan the channel manually. You can manage the channels more easily, and make this unit receive the TV signal better by these operations introduced in this section.

1.Highlight item "Modify channel information" in

"SYSTEM SETUP-CHANNEL SCAN"menu, and press [SELECT] button, then the "Channel Edit" menu will appear, as shown in the right figure:

If this unit have not scanned some

programs,the "Channel Edit"menu can not be displayed.

2.Select the desired channel to modify by

pressing [CH+] / [CH-] button.

CHANNEL EDIT

Name

Frequency TV system NICAM Audio

Skip

Fine tune

P001/Ch001

328.27MHz PAL I ON DUAL A NO

Cancel

2.3.25 Modify Channel

Information (CONTINUED)

3.Change the Channel name: Highlight the

"Name"item, press [SELECT] button, and then the right window of the same line will become input status shown as the following figure.

- 12 -

Move the cursor toa character by [3], [4] buttons, and then change the character by [5], [6] buttons. When finishing changing all the characters, press [SELECT] button to confirm.

CHANNEL EDIT

Name

Frequency TV system NICAM Audio

Skip

Fine tune

Ch001

328.27MHz PAL I ON DUAL A NO

Cancel

# The changing sequence of the character when

pressing [5] button is as following:

0,1,2, 9 A,B,C, Z

a,b,c, z

# When pressing [6] button the sequence is

reverse.

4.Change TV system: Highlight the item "TV system",and press [SELECT] button to display the drop down list. Select proper value , and then press [SELECT] button to confirm. The value of the TV system must match the

received TV signal. If it is not right, the system will not receive the program's sound signal. So you should select the right value.

5.Manual Scan Channels:

A.Select a channel number by pressing [CH+],

[CH-] buttons.

B.According to the demands of the local TV

system, set items "TV system" by the methods described in step .

C.Highlight "Frequency" item in the "Channel

Edit" menu by [5],[6] buttons, and press [3]/[4] button, then the system shall start scanning channels.

# If you press [4] button, the system shall

forward scan channels from the current frequency.

# If you press [3] button, the system shall

backward scan channels from the current frequency.

# When encountering a channel with TV program,

the scanning will stop.

CHANNEL EDIT

Name

Frequency

TV system NICAM Audio Skip Fine tune

P001/Ch001

328.27MHz

PAL I ON DUAL A NO

Cancel

D.When the scanning ending ,that is,

encountering a channel with

TV program, press [SELECT] button, then the

TV program signal shall be correlated with the current channel number & name, that is the current channel number & name represents this TV program.

6.Skip a channel: Highlight the item "skip", and press [SELECT] button to display the drop down list. Select" YES" or "NO", and then press [SELECT] button to confirm.

# If you select "YES", and when receiving TV

programs, this channel can not be received, as if it does not exist.

7.Channel Fine Tuning: Highlight item "Fine tune" in the "Channel Edit" menu. Then you can start fine tuning the channel.

After finishing the channel scanning, maybe

some channels' frequency is not adjusted to right value. In this way, when watching these channels, the image and sound will be misty. Then you should perform channel fine tuning to right adjust these channels' frequency.

2.3.26 Modify Channel

Information(CONTINUED)

Pressing [3] button once can decrease the

frequency. Pressing [4] button once can increase the

frequency.

When changing the frequency, the definition of

the image or sound will be changed correspondingly, then from this, you can know the effect of the fine tuning.

8.Close/Open NICAM functions: Highlight the item "NICAM" , and press [SELECT] button to display the drop down list. Select "ON" or "OFF" from the list, and then press [SELECT] button to confirm.

The so-called NICAM functions include

stereo function and dual dubbings function. When "NICAM" item is "ON", if the received TV program supports stereo function, this unit will output the stereo dubbing; on the other hand, if the received TV program supports dual dubbings function, you can select one of the two dubbings as output by item "System Setup-Channel Scan- Channel audio language" . Of course , if you set "NICAM" to "OFF"or receive TV program without NICAM function, the above functions are invalid.

9.Switch channel audio language:when receiving the TV programs supporting dual dubbings functions, you can select one of the two dubbings as output by this item.

- 13 -

A.Highlight item "Audio"in the "Channel

Edit"menu, and then press [SELECT] button to pop up a submenu list.

B.Select "DUAL A" or "DUAL B " in the list, and

then press [SELECT] button to confirm.

CHANNEL EDIT

Name Frequency TV system NICAM

Audio

Skip Fine tune

P001/Ch001

328.27MHz PAL I ON DUAL A

DUAL A

OFF

DUAL B

Cancel

# You must open the NICAM function first,

otherwise this function will be invalid. Please refer to step in section " Modify Channel

Information " to open the NICAM function.

The value "DUAL A" or "DUAL B"stands for

one of the two dubbings. If the received TV program can not support dual dubbing function, the above operations shall not influence the output dubbing.

You can select "DUAL A" or "DUAL B" by

[AUDIO] button in the remote control when not in "CHANNEL EDIT" menu.

2.3.27 Sort Channel Order

1.Highlight item "Sort channel order",and press [SELECT] button, then a corresponding menu will appear, as shown in the right figure.

If this unit has not scanned some

programs,the " "menu can not beDisplayed.

Sort channel order

CHANNEL SORT

P000 Ch000 Unskip P001 Ch001 Unskip P002 Ch002 Unskip P003 Ch003 Unskip P004 Ch004 Unskip P005 Ch005 Unskip

P006 Ch006 Unskip

P007 Ch007 Unskip P008 Ch008 Unskip

button to select the right position where you

want to insert this channel.

4.Press [SELECT] button to insert the channel name to the selected position in the left list window, as shown in the right figure.

5.Press [RETURN] button to return to the previous menu and proceed other settings.

CHANNEL SORT

P010 Ch010 Unskip P011 Ch011 Unskip P012 Ch012 Unskip P013 Ch013 Unskip P014 Ch014 Unskip P006 Ch006 Unskip P015 Ch015 Unskip P016 Ch016 Unskip P017 Ch017 Unskip

After pressing the [SELECT] button, this channel name is moved to this position.

P006 Ch006 Unskip

Before pressing the

[SELECT] button, the

channel name is in here.

2.3.28 System Clock Setup

1.Enter the system setup mode.

2.In the system setup control menu, move the cursor to select item " " by [5], [6] buttons, and then press [SELECT] button, so the TV screen will display the time setup window, which is shown as the right figure.

SYSTEM SETUP - CLOCK

Date(dd/mm/yy)

Time(hh:mm:ss)

01/01/01

12:17:14

2.3.29 System Clock Setup

(CONTINUED)

3.Select item "Date (dd /mm / yy)" and make it in input mode. Highlight a number by [3], [4] buttons, and change it by [5],[6]buttons. After inputting the date by sequence of "date/ month/year",press [SELECT] to confirm.

SYSTEM SETUP - CLOCK

Date(dd/mm/yy)

Time(hh:mm:ss)

01/01/01

12:17:14

2.Highlight the desired channel in the left list window by cursor buttons, and press [SELECT] button, then the channel name will appear in the right list window, shown as the right figure.

CHANNEL SORT

P000 Ch000 Unskip P001 Ch001 Unskip P002 Ch002 Unskip P003 Ch003 Unskip P004 Ch004 Unskip P005 Ch005 Unskip P006 Ch006 Unskip P007 Ch007 Unskip P008 Ch008 Unskip

P006 Ch006 Unskip

3.Move the channel name up and down by [5],[6]

4.Select item "Time (hh: mm: ss)" and make it in input mode. Highlight a number by [3],[ 4] buttons, and change it by [5],[6]buttons. After inputting the time by sequence of "hh:mm:ss",press [SELECT] to confirm.

SYSTEM SETUP - CLOCK

Date(dd/mm/yy)

Time(hh:mm:ss)

- 14 -

01/01/01

12:17:14

# The correct setup of system clock is the

precondition of time recording.

2.4 RECORDING MODE

2.4.1 Summarization

This unit has various external input signal terminals including S-video input, composite video input, TV tuner input, DV input , SCART input and stereo audio input. You can record any group of these video and audio input signals.

The recordable discs of this unit are DVD+RW and DVD+R. There are four recording qualities to be selected,including SLP (about 6 hours), EP (about 4 hours), SP (about 2 hours) and HQ (about 1 hour).

This unit also incorporates time recording function with which you can prepare a record schedule before-hand and it will record your desired programs according to the schedule on time.

2.4.2 How to Receive the TV

Program

1.Connect the system according to the figure

shown in section "System Connections Connecting to the TV set".

2.Connect the power plugs of the TV and this

unit to the outlet.

3.Switch the TV set to AV mode, and turn on this

unit by pressing the [STANDBY/ON] button .

4.Press the [SETUP] button to enter the System

Setup mode, and then perform the Channel Scanning and Channel Fine Tuning according to the steps introduced in chapter" System Setup - Channel Tuning" .After finishing, please press [SETUP] button to exit setup mode.

Before receiving TV programs for the first time,

you must do this step, this unit will save corresponding information after you have done it .

5.According to the method described in section

"Viewing the Input Source",select the TV input source to view.

6.Press [CH+]/[CH-] to switch the TV program.

2.4.3 Viewing the Input Source

You can let the input source signal be shown directly on the TV screen. By this function

you can get a preview of the external signals for more rightly selecting the desired signal.

1.Please connect the system according to

"System Connections-System Connection of Recording External Signals" .

Make the source equipment work properly,

and let it output the signal intended for recording.

2.There are three ways for selecting the signal to view.

A.Pressing [SOURCE] button can directly view

the external signals one by one. The sequence of viewing the external signal is shown in the following.

Front

Rear

Playback MODE

TV INPUT

CVBS

Rear

S-VIDEO

SCART

B.When this unit is playing a title of a DVD+RW

disc, after pressing [SOURCE] button, a warning message window will appear as shown in the following figure .

Please press [SELECT] button, and then

select the signal you want by method in point

OverWrite!!!

Overwriting from current point if you select Overwrite mode to record!

C.Press [NAVIGATION] button once or twice to

display the record control menu. Select "SOURCE" item by [5], [6] button , then press [SELECT] button to display the source drop down list as shown in the following figure . Select the desired source from the list, and press [SELECT] button, then the TV screen will show the corresponding picture.

RECORD (DVD+RW)

MODE

New Title

Front CVBS

Notes

SOURCE

QUALITY

TRICK

TITLE

CHAPTER

Front CVBS

Rear CVBS

Rear S-VIDEO

SCART

The source drop down list

# # In the above three ways , if the system displays

" " , it means viewing the input source can not be realized in the current mode , so please press [RETURN] button once or more times to quit the current mode, then perform the corresponding operations again.

When the unit is recording ,if you want to view

the external signals , you must stop the recording first.

2.4.4 Manual Recording

The following figure shows the construction

of the menu in recording mode.

- 15 -

The last three items can not be controlled in this mode, but you can learn some information by them. Please follow the following steps to finish a recording task.

New Title

RECORD (DVD+RW)

MODE

New Title

TRICK

TITLE

TIME

Front CVBS

Stop

01/01

0:01:55/1:24:21

SOURCE

QUALITY

CHAPTER

Append title

Overwrite title Overwrite disc

Front CVBS Rear CVBS Rear S-VIDEO DV SCART Tuner

HQ SP EP SLP

Stop Pause

the menu construction in recording mode

Record

mode list of recording

source list

recording quality list

recording process control item list

1.Make sure an unfinalized DVD+R or DVD+RW

disc has been in the disc tray.

2.Select the desired external signal source to be

recorded according to the way in section "Viewing the Input Source".

3.Press [NAVIGATION] button to display the

record control menu .

4.Refer to the menu construction figure, rightly

set the values of "MODE" and "QUALITY". You can refer to following contents to realize this step.

# # Highlight the desired menu item by [5], [6]

buttons, pop out the submenu by [4] or [SELECT] button, and confirm by [SELECT] button.

Meanings of some values in the submenu are

as follow:

2.4.5 Manual Recording

(CONTINUED)

MODE

New title: Add a new title when recording.

Append title: Append the recording content to the last title, and does not add a new title. Overwrite title: When you perform this order by method as follow , this unit will overwrite the current title from current point as a new title .In this situation, the recording will stop automatically when meeting the end of the current title .If you press [STOP] button before the recording stops automatically, the remanent part of the current title will turn into another new title.When you perform this order by method as follow, this unit will overwrite the current title from the beginning of the current title , and the recording will stop automatically when meeting the end of the current title. If you press [STOP]

Button before the recording stops automatically, the remanent part of the current title will turn into another new title.

Overwrite disc:When you perform this order

by method as follow , this unit will overwrite

the disc from current point as a new title. In this situation , the recording won't stop until you press [STOP] button. If an existed title doesn't be overwritten totally after you press [STOP] button, the remanent of the current title will turn into another new title .When you perform this order by method as follow, this unit will

overwrite the disc from the beginning of the current title. In this situation , the recording won't stop until you press [STOP] button. If an existed title doesn't be overwritten totally after you press [STOP] button , the remanent of the current title will turn into another new title .

Notes

# In some situations , "Overwrite title" and

"Overwrite disc" may be invalid . To make it valid , there are two ways as follow:

A.When selecting the desired external signal

source in step described above , make sure that the Step in section "Viewing the Input

Source" has been done. Then please perform

steps , and .

B.After the unit has read an unempty DVD+RW

disc , select an unempty title by [5],[6] button then press [4] button to display the control menu . From it ,select "Overwrite title "or "Overwrite disc " item by [5],[6] button and press [SELECT] button to confirm. Then

please perform steps , and

SOURCE

Front CVBS : Front panel composite Videoand audio inputs Rear CVBS : Rear panel composite video And audio inputs Rear S-VIDEO : Rear panel S-video and audio Inputs DV : Front panel DV input SCART : Rear panel CVBS and audio Inputs Tuner : Rear panel TV turner input,

please select the TV program By [CH+],[CH-] buttons.

Notes

# The source value must match the port through

which the external source signal is inputted.

- 16 -

QUALITY

HQ: perfect quality, a single-side DVD disc can record about one hour program.

SP: standard play, a single-side DVD disc can record about two hours program.

EP: extend play, a single-side DVD disc can record about four hours program.

SLP: standard long play, a single-side DVD disc can record about six hours program.

YRICK

Stop : Stop the recording

Pause : Pause the recording

Record : Start recording

5.After finishing the steps described above,

please set item "TRICK" to "Record" ,then press [SELECT]button to start recording . While recording , you can pause or stop recording by setting item "TRICK" to the corresponding value. Certainly , you can more conveniently realize these control by pressing [RECORD], [PAUSE] and [STOP] buttons.

2.4.6 One Touch Recording (OTR)

This function can make you set the end time of the recording.When the time is up,the recording will stop automatically.

1.Enter the recording mode and start recording.

2.According to the desired time, press the

[RECORD] button once or more.

# Pressing [RECORD] button once, the length

of the recording time will extend for 15 minutes ( 60minutes)or 30 minutes(>60minutes). If it exceeds the disc recordable time, the system will cancel OTR function and switch to normal recording mode.

# If the OTR process is paused or stopped, the

system will cancel the OTR.

2.4.7 To Control the DV Camera

Recorder by this Unit

This unit may control the DV camera recorder through the 1394 serial interface, that is, when using DV as input source, you may fulfill the operations of playback ,pause, etc. to the DV through the remote control of this unit.

1.Properly connect the DV (Please refer to

"System Connection of Recording External Signals" for details) and make it work normally. Then set the "Source" item in the control menu

bar of this unit to "DV".

2.When pressing the [STOP] button, if this unit is

in recording mode, the recording will stop and the DV can not be influenced, on the other

hand , if the unit is not in recording mode, this

unit can not be influenced and the DV will stop.

# This operation can make the recording control

bar disappear.

3.Pressing the [PLAY] button doesn't influence this unit, but can make the DV switch to normal playback.When pressing [PAUSE / STEP] button, if this unit is in recording mode, the recording will pause and the DV can not be influenced; on the other hand, if the unit is not in recording mode, it can not be influenced and the DV will pause.

# This operation can make the recording control

bar disappear.

5.When pressing the [REW] button, the DV will play fast backward. If this unit is in recording mode, the recording will pause.

# This operation can make the recording control

bar disappear.

6.When pressing the [FWD] button, the DV will play fast forward. If this unit is in recording mode, the recording will pause.

# his operation can make the recording control

bar disappear.

Notes

# Do not shake this unit or unplug it when

recording.

# A finalized DVD+R disc cannot be used to

record.

# If you want to play the recorded disc in normal

player, you should perform the operation of Finalizing or Making Compatible. Please refer to "Disc Operation" for details.

2.5 TIMER TASK SETTING

MODE

2.5.1 Summarization

This function can make this unit record automatically according to the preset requirements when the preset timeis coming. And it will resume the original mode after finishing the recording.To carry out this function. You should set down a record schedule first and then finish the configuring of the system

according to the requirements on the schedule. If you are busy and unwilling to miss any wonderful program, this unit can satisfy your requirements.

Operation Steps

1.Press the [TIMER] button to display the record

scheduler menu shown as the following figure.

- 17 -

# Highlighting any non-empty note by cursor

buttons, and then pressing [ADD/CLEAR] button, can delete it.

Record scheduler

Source

Quality

Date

End

Start

2.Press [SELECT] button ,then the TV screen will display the Item Editor window as shown in the following figure.

# Performing the relative setting in this Item

Editor window can make a record Scheduler.

Item Editor

Source

Quality

Mode

Date

Start

End

Front CVBS

Once

02/09/04

0 1 : 4 8

0 2 : 1 8

CancelOK

the Item Editor window

3.Setting the input source:Press [SELECT] button to display the drop down list, then select the right item from the list by [5],[6] buttons. At last, press [SELECT] button to confirm.

# Please refer to "System Setup -Record

Settings - Default Input Signal Sources Selection " for the values of the " Source" Item.

# For example, if you want to record the Ch003

TV program, you may set the value of the Source item to Ch003.

Item Editor

Source

Quality

Mode

Date

Start

End

Front CVBS

Rear CVBS Rear S-VIDEO SCART

0 1 : 4 8

0 2 : 1 8

CancelOK

2.5.2 Operation Steps

(CONTINUED)

Highlight "Quality" item by [5],[6]buttons, and press [SELECT] button to display the drop down list, select the right value from the list, and then press [SELECT] button to confirm. # As for the recording quality, please refer to

"Basic Information -Terms" for details.

Item Editor

Source

Quality

Mode

Date

Start

End

Front CVBS

Once

0 1/01/04

0 2 : 1 8

SLP

0 2 : 1 8

CancelOK

5.Setting recording date You can perform this setting at the third

row in the "Item Editor". Move the cursor to select this rowand press [SELECT] button, then a list will pop up. It is shown as follows: # From this illustration, we can learn that this pop

up list has six options. Their meanings are as

follows: # ONCE: record at a certain time # DAILY: record once per day # WEEKLY: record once per week # Mon~Fri: record once per day from Monday to

Friday # Mon~Sat: record once per day from Monday to

Saturday # Sat~Sun: record once per day from Saturday to

Sunday

Item Editor

Source

Quality

Mode

Date

Start

End

Front CVBS

Once

Start

0 1/01/04

Daily

0 2 : 1 8

End Weekly

0 2 : 1 8

CancelOK

A.If you select "ONCE", after confirming by

[SELECT] button, move cursor by[6] button

and press[SELECT] button to make the next

row into input mode, then input the date in

sequence of "date/month/year" . Finally

press [SELECT] button to Confirm. # When the date input window is in input mode,

you can select a number by [3], [4]buttons

,then press [5]/[6] button to change it .

Item Editor

Source

Quality

Mode

Date

Start

End

Front CVBS

Once

0 1/01/04

0 1 : 4 8

0 2 : 1 8

CancelOK

B.If you select "DAILY"/"Mon~Fri"/"Mon~Sat"/

“Sat~Sun", you only need to press [SELECT]

button to confirm. And then the TV screen will

display the following figure.

Item Editor

Source

Quality

Mode

Date

Start

End

Front CVBS

Daily

Everday

0 1 : 4 8

0 2 : 1 8

CancelOK

- 18 -

C.If you select "WEEKLY", after confirming by

[SELECT] button, move cursor by [6] button and press [SELECT] button to display the weekday list, then select what you need from the list.

Item Editor

Source

Quality

Mode

Date

Start

End

Front CVBS

Weekly

Saturday

Wednesday Thursday Friday

Saturday

OFF

2.5.3 Operation Steps

(CONTINUED)

6.Setting the start time of recording.Select the "Start" item by [5], [6] buttons in the "Item Editor" and press [SELECT] button to make it in input mode, as shown in the right figure. Input the time between 00:00~23:59 by number buttons, then press [SELECT] button to confirm.

# Highlighting a number by [3], [4] buttons, and

then pressing[5], [6] buttons can change the number.

Item Editor

Source

Quality

Mode

Date

Start

End

7.Setting the end time of recording. The operation is similar to that in step .

# The meaning of this setting is that when the

finish time is up, the recording will be over and the unit will resume to the original mode before recording.

# If the record time (from the start time to the End

time) is too long,an error message window will appear on the button of the screen, and you can not perform the following steps. And then you need to set the "Start" time and "End" time again.

Item Editor

Source

Quality

Mode

Date

Start

End

8.After every parameter of the time recording is

Front CVBS

Once

02/09/04

0 1 : 4 8

0 2 : 1 8

CancelOK

Front CVBS

Once

02/09/04

0 1 : 4 8

0 2 : 1 8

CancelOK

well set, please highlight the "OK" button in

the "Item Editor" , and press [SELECT] button to finish the setup.

9.Set another timer recording task or press [TIMER] button to quit the record schedule menu.

10.After finishing setting the recording schedule, collocate the system according to the requirements in the recording schedule and make this unit in standby or working mode.

# In 3 minutes before recording, if the unit is

working normally, a message dialogue will appear to require whether it starts to record. If the recording conditions are satisfied, please highlight the "OK" button on the dialogue and press [SELECT] button to confirm.

# If this dialogue is not managed, the system will

think you are agree to record. After a moment, it will start recording.

# If the system is in standby mode, it will

automatically switch on and enter the recording mode in about 1 minutes before recording, and then start recording.

# After the recording is finished, the system

automatically enters the standby mode.

Notes

# This unit can't perform two or more timer

record tasks at the same time.

# Before timer recording, you must set the

system time & date (refer to "System SetupSystem Clock Setup" for details) properly, otherwise, this function introduced in this chapter will not be implemented.

# The system must be properly collocated to

fulfill the schedule recording task.

# Do not use the finalized DVD+R disc.

After finishing recording a DVD+RW/ DVD +R disc, you may play it in this unit, then you can do some operations on it to make it more easy to use. When loading this disc, the TV screen will display the following picture. Each little icon in the picture stands for a title, the right words and numbers indicate some information of the title. Their meanings are as follows: a.Title name, and "Title" is the default name. b.The date of recording this title. c.The time of recording this title D.The record quality and length of the title

The following descriptions will tell you how to do when meeting this picture.

- 19 -

1.TITLE 01/01/2000 03:25:02 SP 00:01:04

2.TITLE 01/01/2000 03:25:02 SP 00:03:42

3.TITLE 01/01/2000 03:25:02 SP 01:28:28

The start picture when playing DVD+R/RW disc recorded by this unit (Title list )

Play title

Edit title

Rename title

Erase title

Overwrite title

Overwrite disc

Append title

2.5.7 Rename Title

1.Highlight a title icon you want to rename in the Title List and press [4] button, then a menu will pop up as shown in the right figure.

2.5.4 To Browse the Contents of

the Disc and Select one Title to Play

1.Roll up and down the title list picture by [5], [6] buttons to browse all the titles.

2.Highlight a title icon you desire to play by [5], [6] buttons, then press [SELECT] button to play it.

3.During playing, you can press [TITLE] button to switch the TV screen picture to Title List to select another title to play.

2.5.5 Erasing Title

1.Highlight a title icon you want to delete in the Title List picture and press [4] button, then a menu will pop up as shown in the right figure.

2.Highlight "Erase title" item, and press [SELECT] button, then the system will erase this title.

Play title

Edit title

Rename title

Erase title

Overwrite title

Overwrite disc

Append title

2.5.6 Edit Title

This operation can switch the system to edit mode.The functions and operations for edit mode are described at the next chapter.

1.Highlight a title icon you want to edit in the title List picture and press [4] button, then a menu will pop up as shown in the right figure.

2.Highlight "Edit title" item, and press [SELECT]button, then the system will enter edit mode.

3.Then, refer to chapter "Editing Mode"to perform corresponding operations.

4.To exit, please press [EDIT] button first and wait a few seconds until system operation is finished.

Play title

Edit title

Rename title

Erase title

Overwrite title

Overwrite disc

Append title

2.Highlight "Rename title" item, and press [SELECT] button, then a key board menu will pop up.

Title name:

TITLE _

A B C D E F G H I J K 0 1 2

L M N O P Q R S T U V 3 4 5

W X Y Z

Space Caps BkSp

( )

Delete

6 7 8 9

Exit

Clear

the key board menu

The meanings and operations of the controller in the key board menu are as follows: # Title Name Editing window # Characters area: select a certain key in this

area by using cursor buttons, and then press the [SELECT] button. The letter on the key will appear in the Title Name Editing window.

# Space: blank button by which you can insert a

blank to title name.

# Caps: selecting this key and pressing the

[SELECT] button can make the letters in the Characters area switch between the capitalization and the common letterform.

# BkSp: selecting this key and pressing the

[SELECT] button can cancel the letter before the cursor in the Title Name Editing window, meanwhile the cursor backs a space.

# Delete: selecting this key and pressing the

[SELECT] button can cancel the letter after the cursor in the Title Name Editing window.

# Clear: selecting this key and pressing the

[SELECT] button can clear all the letters in the

Title Name Editing window.

# Exit: selecting this key and pressing the

[SELECT] button can exit this menu and keep

- 20 -

the Title Index name unchanged. # OK: selecting this key and pressing the

[SELECT] button can exit this menu, meanwhile change the Title Index to the one in title Name Editing window.

3.Type a new title name in the Title Name Editing window by the keyboard in the menu.

4.Select the "OK" key and press the

[SELECT] button to fulfill the naming to the title.

2.5.8

Overwrite Title / Append

Title / Overwrite Disc

"Overwrite title", "Append title" and "Overwrite disc" are three kinds of record mode. The meaning about them is introduced in section "RECORDING MODE --Manual Recording-MODE". If youhave connected the external signal to this unit, you can select one of them to perform recording.

1.Highlight a title icon you want to overwrite and

press [4] button to display the menu.

2.Highlight "Overwrite title" item, " Append title"

item or "Overwrite disc" item, then press [SELECT] button to confirm.please note that you can see "Append title" item only in menu

of the last title.

Play title

Edit title

Rename title

Erase title

Overwrite title

Overwrite disc

Append title

Highlighting the "overwrite title" item

Play title

Edit title

Rename title

Erase title

Overwrite title

Overwrite disc

Append title

Highlighting the "overwrite disc" item

Play title

Edit title

Rename title

Erase title

Overwrite title

Overwrite disc

Append title

Highlighting the "Append title" item

2.6 EDITING MODE

2.6.1 Summarization

For the recorded disc, the dividing of the title and chapter can't match your fancy. The index icon and name of each title are confirmed by the system, which are not striking, not beautiful, not convenient to skim over the disc, and not possible to meet your personalized enjoyment either. The edit function is set for getting over the above limitations.

2.6.2 Entering the Editing Mode

When the disc in the loader is DVD+R/RW and the system is not in the mode of writing or erasing ,pressing the [EDIT] button can enter the edit mode and display the control menu.

Notes

# When" " appears while you press the

[EDIT] button, it mayindicate that the DVD+RW disc in the loader has been write protected, or the system in current mode can not enter the editing mode. You can perform the disc operation to cancel the write-protect or exit current mode.

2.6.3 Menu Explanation

The editing control menu is shown in the

EDIT MODE

Title: 01/05

Chapter: 01/01

PLAY

Chapter marker

Hide chapter

Index picture

Split title

T-Elapsed: 0:01:05

1.Title : the left of the number beside the icon is

the current title number, and the right is the total of the titles in the disc.

2.Chapter : the left of the number beside the

icon is the current chapter number, and the right is the total of the chapters in the disc.

3.Play : this item can perform the following

functions: Play, Pause, Fast forward, Slow forward, and Step.

4.Chapter marker : separate or combine the

chapters.

5.Hide/Unhide chapter: display or skip the

chapter when playing it.

6.Index picture : change the index icon .

7.Split title : divide current title to 2 titles at

current point.

8.T-Elapsed: can not be controlled, showing the

elapsed time.

2.6.4 Operation Steps

Selecting the Title/Chapter to be Edited

1.Enter the editing mode

2.Select the Title/Chapter item by using [5], [6]

buttons in the editing control menu.

2.6.5 Selecting the Title /Chapter

to be Edited (CONTINUED)

3.Press [SELECT] button to make the Title/

Chapter item in input mode.

- 21 -

4.Input the number of the Title/Chapter to be edited by using number buttons,and press [SELECT] button, then the system starts to play the selectedtitle or the one which the selected chapter belongs to repeatedly.

EDIT MODE

Title: 01/05

Chapter: 01/01

PLAY

Chapter marker

Hide chapter

Index picture

Split title

T-Elapsed: 0:01:05

2.6.6 Insert Chapter Marker

1.In the edit control menu, move the cursor by [5],

[6] buttons to highlight the "Chapter marker" item, then press [4] / [SELECT] button to display the value list shown as the following figure.

EDIT MODE

Title: 01/05

Chapter: 01/01

PLAY

Chapter marker

Hide chapter

Index picture

Split title

T-Elapsed: 0:01:05

2.Select proper value from the list by [5], [6]

buttons, and press [SELECT] button to confirm, then the system will start separating or combining the current chapter.

# If you select "Delete marker", this chapter and

the former chapter will be combined to one chapter.

# If you select "Insert marker", this chapter will

be separated into two at the current location.

# If you select "Delete all markers", all chapters

of this title will be combined into one chapter.

2.6.7

Hiding / Unhiding Chapter

1.In the edit control menu, move the cursor by [5],

[6] buttons to select the Chapter Hide/Unhide item.

2.Press the [SELECT] button to switch the value

of this item.

# If the value is "Hide chapter", this chapter will

be played when playing in normal mode.

# If the value is "Unhide chapter", this chapter

will be skipped when playing in normal mode.

EDIT MODE

Title: 01/05 Chapter: 01/01

PLAY

Chapter marker

Hide chapter

Index picture

Split title

T-Elapsed: 0:01:05

Insert marker

Delete marker Delete all markers

the value list of the "Chapter marker" item

Notes

# This operation is invalid to DVD+R.

2.6.8 Changing the Index Picture

When entering the DVD title menu(Press the [TITLE] button when playing), the title index will be shown on the screen as a little icon, standing for a title (Please refer to "Playback Mode").The method of changing the title index is introduced in the following.

1.In the edit control menu, move the cursor by [5],

[6] buttons to select the "Index picture" item.

2.Now, please watch the playing picture carefully,

when meeting a picture you like, you can press [SELECT] button to replace that title icon by that picture.

EDIT MODE

Title: 01/05 Chapter: 01/01

PLAY

Chapter marker

Hide chapter

Index picture

Split title

T-Elapsed: 0:01:05

2.6.9 Split Title

1.Highlight the "Split title" item in edit control

menu, shown as the following figure, then

press [SELECT] button.

# The operation will divide current title to 2 titles

at current point, and it will occupy many time, please wait for a moment.

EDIT MODE

Title: 01/05 Chapter: 01/01

PLAY

Chapter marker

Hide chapter

Index picture

Split title

T-Elapsed: 0:01:05

Notes

# This operation is invalid to DVD+R disc.

2.6.10

Exiting the Editing Mode

1.Press [EDIT] button to exit this mode. # When exiting, the system will write some

information into the disc, so the unit will stop responding for a while.

2.7 DISC OPERATION MODE

2.7.1 Summarization

The disc operations refer to some operations about the disc in the loader , including viewing the disc information, finalizing

- 22 -

a disc, erasing the disc content, erasing the

title, lock/unlock the disc and so on.

2.7.2 Entering the Disc Operation

Mode

If you load unfinalizing DVD+R or DVD+RW disc, you can enter this mode. There are two ways to enter this mode.

1.During playing, you can enter this mode by

[DISC OPER] button. After entering the mode, pleas press [4] button to display the control main menu, as shown in the following figures.

Play

Rename disc

PAL

Finalize disc

DVD

Record a new title

EDIT

When playing unfinalizing DVD+R

Play

Rename disc

PAL

Erase disc

DVD

Record a new title

EDIT

Overwrite disc Make compatible Lock disc

When playing DVD+RW

Play

Unlock disc

PAL

DVD

EDIT

When playing locked DVD+RW

2.Display Title List picture by the methods

introduced at chapter "Playing and Processing the Disc Recorded by this Unit", and press [5] button continuously until the icon appears, then press [4] button.

PAL

DVD

EDIT

2.7.3 Operations

# Play: Highlight item "Play" in the menu, and

then press [SELECT] button.

# Rename disc:

Highlight item "Rename disc", and press

[SELECT] button, then a keyboard menu will appear. By the keyboard, you can rename the disc through the methods introduced in chapter"Playing and Processing the Disc Recorded by this Unit".

# Finalize disc/Make compatible :

Disc name:

MY DVD

A B C D E F G H I J K 0 1 2

L M N O P Q R S T U V 3 4 5

( )

W X Y Z

Space Caps BkSp

the key board menu by

which you can rename the disc

# "Finalize disc" is valid for DVD+R disc. If do

this, the disc can be played in normal DVD player, but can't record new contents. "Make compatible" is valid for DVD+RW disc. These operations can make the disc able to be

played in normal player. Highlight item "Finalize disc" and press [SELECT] button, then a dialogue will open shown as the right figure, please highlight "Ok" key in the dialogue, then press [SELECT] button to start this operation.

These operations will occupy some time,

Please wait for a few minutes.

Delete

6 7 8 9

Exit

Clear

# "Make compatible" can appear if you make

"Insert Maker" operation according to the method in section "EDIT MODE -Insert Chapter Maker".

Finalize disc

Warning: this operation will finalize the DVD+R disc in loader. If finalized, it can not record new content any more. Are you sure to continue?

Yes No

# Lock disc: " Lock disc" is valid for DVD+RW.

This operation can protect the recorded contents frombeing deleted. If you want to record new contents in the disc, you must unlock the disc. You can highlight item "Lock disc" and press [SELECT] button to lock or unlock the disc. If the disc is locked, this operationwill unlock the disc, otherwise it will lock it.

# Erase disc: This operation is only available for

DVD+RW disc.Highlight item "Erase disc" and press [SELECT] button, then the system will start erasing disc contents. This operation will occupy many time. When erasing, any other operations can not be proceeded, including standby. Once the operation starts, it cannot be cancelled midway. Please do not unplug the unit midway. Otherwise, the disc will be probably damaged.

# Record a new title / Overwrite disc: These

operations can perform recording function. "Record a new title " can add a new title when recording , and "overwrite disc"can overwrite all the contents in the disc as new one. You can highlight "Record a new title" or "Overwrite disc" item, and press [SELECT] button to start recording.

2.7.4 Exiting the Disc Operation

Mode

1.Press [DISC OPER] again to exit.

2.8 PLAYBACK MODE

2.8.1 Entering the Playback Mode

In the playback mode, this unit is totally the same as a high quality DVD player. The way to enter the playback mode is as follows:

1.Connect this unit with the TV set (Refer to

"System Connection" for details), turn on the TV set and switch it to the AV input mode.

- 23 -

+ 156 hidden pages