B&B Electronics 485OPDR Datasheet

RS-422/485 Isolated Repeater

485OPDR

PRODUCT FEATURES

• Extenddataupto1.2km(4000ft.)

• 2000Vopticallyisolateddatalines

• -40to80°Coperatingtemperature

• ModbusASCII/RTU

The 485OPDR is an optically isolated RS-422/485 isolated line repeater that
can be used to isolate a piece of equipment from the rest of the network. As
a repeater, it extends the distance of an existing network an additional 1.2
km (4000 ft.) and expands it beyond the typical 32-node limitation. Data
signals and the power inputs connect to the terminal block. 600W surge
suppression ensures that the connected equipment is protected even in the
harshest of environments. 2-wire RS-485, 4-wire RS-485 and RS-422 are
supported.

The repeater operates on externally sourced 10 to 30 VDC power. The
enclosure has a DIN rail mount that is designed to fit easily on a standard
35mm rail.

ACCESSORIES

MDR-20-24 - DIN rail mount power supply 24VDC, 1.0 A output power

MDR-40-24 - DIN rail mount power supply 24VDC, 1.7 A output power

DRPM25 - 35mm DIN Rail to Panel Mount Bracket, 25mm wide

EK-CLIP-MPC - DIN rail clip for enclosure

1.0 in

2.5 cm

7.9 cm

3.1 in

3.7 in

9.5 cm

www.bb-elec.com

[e-mail]
[e-mail]

International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax [phone]
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland [phone] Fax [phone]

ORDERING INFORMATION

Model nuMber desCriPtion

485OPDR RS-422/485 Isolated Repeater

SPECIFICATIONS

rs-422/485

Connector Terminal Block

Signals

isolation

Method Optical
Rating 2000 V

surge suPPression

Method TVS

Rating

Response Time < 1 pico-second

industrial bus

Power

Connector Terminal block
Voltage 10 to 30 VDC
Power Consumption 0.7 W
Source External source required

terMinal bloCks

Wire Size 24 to 14 AWG
Torque 4 kgf-cm

led indiCators

2 DATA LEDs (RED)

enClosure

Material Plastic
IP Rating 20
Dimensions 2.5 x 7.9 x 9.5 cm (1.0 x 3.1 x 3.7 in)
Mounting 35 mm DIN (Panel Mount Adapter is available)

environMental

Operating Temperature -40 to 80 C (-40 to 176 F)
Storage Temperature -40 to 85 C (-40 to 185 F)
Operating Humidity 0 to 95% Non-condensing
MTBF 225299 hours
MTBF Calculation Method MIL217F Parts Count Reliability

Agency Approvals

TDA(-), TDB(+), RDA(-),
RDB(+), GND
RS-422 4-wire, RS-485 2- and 4-wire
Protected GND on Isolated Side

6.5V bi-directional
avalanche breakdown device
500W peak power dissipation

Modbus ASCII/RTU

Data LED for each side of isolator
Flashes when data transmitted

CE, FCC
cULus Recognized, File E222870

485OPDR_3713ds