B&B Electronics 317FX-SC, 317FX-ST Datasheet
THE INDUSTRIAL NETWORK COMPANY
The N-TRON® 317FX-N, an unmanaged Industrial Ethernet
switch, is designed for use in industrial data acquisition, control,
and Ethernet I/O applications. The rugged DIN-RAIL enclosure
protects the switch from harsh environmental conditions,
enabling fl awless performance in extreme settings.
PRODUCT FEATURES
• Compact Size
• Full IEEE 802.3 and 1613 Compliance
• NEMA TS1/TS2 Compliance
• Extended Environmental Specifi cations
• Sixteen 10/100 BaseTX RJ-45 Ports
• One 100BaseFX Ports, ST (shown) or SC
• Supports Full/Half Duplex Operation
• LED Link/Activity Status Indication
• Store-and-Forward Technology
• Auto Senses Speed and Flow Control
• MDIX Auto Cable Sensing (RJ-45)
• Up to 2.6 Gb/s Maximum Throughput
• Rugged Industrial DIN-Rail Enclosure
• Redundant Power Inputs (10-30 VDC)
• N-View
• Bi-Color Status LEDs For Link, Speed, Activity & Duplex
• Port Control
™
OPC Switch Monitoring Option
317FX-N
PRODUCT OVERVIEW
The 317FX-N switch is designed to meet and exceed the
most demanding industrial communication requirements
while providing high throughput and minimum downtime.
The 317FX-N provides sixteen RJ-45 auto sensing 10/100BaseTX
ports. All ports are full/half duplex capable, using leading-edge
Ethernet switching technology. The switch auto-negotiates
the speed and fl ow control capabilities of the TX copper port
connections and confi gures itself automatically. The fi ber optic
port supports full 200Mb/s communications via 100BaseFX.
Bi-color LEDs are provided to display the link status, speed and
activity of each port as well as power on/off status.
The 317FX-N
extensive wiring changes if upgrades are made to host
computers, plant systems, or Ethernet I/O modules. The
switching fabric simply scales up or down automatically to
match network environments. The device supports up to 4,000
MAC addresses, enabling these products to support extremely
sophisticated and complex network architectures.
The 317FX-N is an ideal candidate for upgrading existing hubs
and repeaters to increase bandwidth and determinism by
virtually eliminating network collisions. The product provides
a cost-effective solution while maintaining the plug & play
simplicity of an unmanaged hub.
is auto sensing, so there is no need to make
The 317FX-N simplifi es plant wiring by eliminating the
need to bring data acquisition and control connections
back to a climate controlled environment. The switch has
extended operating specifi cations to meet the harsh needs of
the industrial environment, including extended temperature
rating, extended shock and vibration specs, redundant power
inputs, and a high MTBF (greater than 2M hours).
For cost savings and convenience, the 317FX-N can
be DIN-RAIL mounted alongside Ethernet I/O or other
Industrial Equipment. It can also be panel mounted.
To increase reliability, the 317FX-N
power inputs. LED's are provided to display power on/off
status as well as the link status and activity of each port.
N-VIEW OPC PORT MONITORING (With -N Option Only)
The N-TRON N-View OLE for Process Control (OPC)
Server Software can be combined with popular HMI
software packages to add network traffic monitoring,
trending and alarming to any application using N-TRON
switches confi gured with the N-View option.
N-View OPC Server collects 41 different traffi c variables
per port and fi ve system level variables per switch. This
information can provide a complete overview of the network
load, service quality, and packet traffi c. OPC client software
can use N-View OPC Server data to resolve network
problems quickly and improve system reliability.
contains redundant
N-TRON's
THE INDUSTRIAL NETWORK COMPANY
317FX-N Specifi cations
Switch Properties
Number of MAC Addresses: 4,000
Latency (typical): 2.1 μs
Backplane Speed: 2.6Gb/s
Switching Method: Store & Forward
Case Dimensions:
Height: 7.4" (18.8cm)
Width: 2.3" (5.8cm)
Depth: 3.5" (8.9cm)
Weight: 1.9 lbs (0.9kg)
Din-Rail: 35mm
Electrical
Redundant Input Voltage: 10-30 VDC
Input Current: 440 mA@24V
BTU/hr: 36@24V
Inrush: 8.5Amp/0.8ms@24V
Environmental
Operating and Storage Temp: -40ºC to 85ºC
Operating Humidity: 10% to 95%
(Non Condensing)
Operating Altitude: 0 to 10,000 ft.
Fiber Transceiver Characteristics
Fiber Length 2km* 15km** 40km** 80km**
TX Power Min -19dBm -15dBm -5dBm -5dBm
RX Sensitivity Max -31dBm -31dBm -34dBm -34dBm
Wavelength 1310nm 1310nm 1310nm 1550nm
* Multimode Fiber Optic Cable
** Singlemode Fiber Optic Cable
Connectors
10/100BaseTX: Sixteen (16) RJ-45 Copper Ports
100BaseFX: One (1) SC or ST Duplex Port
Serial Confi guration Port
Com Parameters: 9600,n,8,1
Recommended Wiring Clearance
Front: 4" (10.16 cm)
Top: 1" (2.54 cm)
Regulatory Approvals
FCC (CFR 47, Part 15, Subpart B, Class A and ANSI C63.4)
ICES-003
CE (IEC 60068: 2-1/2/6/30 and IEC 60533-7)
UL/cUL: Class I, Div 2, Groups A, B, C, and D; T4
(ANSI/ISA 12.12.01-2007)
EN 60079-0/15 ATEX
GOST-R Certifi ed, RoHS Compliant
Shock and Vibration (bulkhead mounting)
Shock: 200g@10ms
Vibration/Seismic: 50g, 5-200Hz, Triaxial
Reliability
Designed to comply with:
IACS UR E10 (ABS T ype-Approval)
IEC 61850-3 and IEEE 1613 (Elec. Power Sub-stations)
NEMA TS1/TS2 for Traffi c Control
MTBF: >2 Million Hours
Network Media
10BaseT: >Cat3 Cable
100BaseTX: >Cat5 Cable
100BaseFX
Multimode: 50-62.5/125μm
Singlemode: 7-10/125μm
Contact Information
N-TRON Corp. N-TRON Asia N-TRON Europe GmbH
820 S. University Blvd., Suite 4E Suite #: 2267, 22/F, One Lujiazui Alte Steinhauserstr 19
Mobile, AL 36609 USA 68 Yin Cheng Road Center, 6330 Cham / Zg Switzerland
TEL: (251) 342-2164 Pudong New Area TEL: +41 41 7406636
FAX: (251) 342-6353 200120 Shanghai, P.R. China FAX: +41 41 7406637
Website: www.N-TRON.com TEL: +86 (0) 21 6194 6777
Email: N-TRON_info@N-TRON.com FAX: +86 (0) 21 6194 6699
,
®2010 N-TRON, Corp.
may be trademarks and/or registered trademarks of their respective company. Specifi cations subject to change without notice. The responsibility for the use and application of
N-TRON products rests with the end user. N-TRON makes no warranties as to the fi tness or suitability of any N-TRON product for any specifi c application. N-TRON
shall not be liable for any damage resulting from the installation, use, or misuse of this product.
N-TRON and the N-TRON logo are trademarks of N-TRON, Corp. Product names mentioned herein are for identifi cation purposes only and
Printed in USA.
REV 100928
Corporation
Loading...