B&B Electronics 232DSP User Manual

–

Overview

PRODUCT INFORMATION

lightning and other power problems. The Surge Protector uses 600W Transient Voltage Suppressors to protect pins 2 through 8 and pin 20. It has one DB-25 male and one DB-25 female connector with all 25 pins passing straight through. The TVSs are connected between the ground screw and pins 2,3,4,5,6,7,8, and 20. The 232DSP will suppress any voltage levels above 12 volts without affecting the normal RS-232 data.

possible. The ground screw must be connected to earth ground. A minimum of 12 AWG copper wire is recommended. B&B’s Model CU15B is 1.5 x 0.016 in (38 x .25 mm) copper cut to length for ground connections that are longer than a few feet (one meter). If this device is not properly grounded it will not protect RS-232 lines.

B&B Electronics’ Model 232DSP protects RS-232 ports from damage caused by large voltage peaks from

The 232DSP is placed inline, between the data cable and the RS-232 port, as close to the protected port as

232DSP4502-1/1

Model: 232DSP

RS-232 Surge Protector CE

Specifications

Clamping Voltage: 12 volts Peak Pulse Power: 600 watts @ 1 msec. Response Time: less than 1 picosecond Typical Capacitance: 200 picofarads Ground Screw: size 10#

Simplify B&B ELECTRONICS

Manufacturer’s Name: B&B Electronics Manufacturing Company Manufacturer’s Address: P.O. Box 1040

Model Number: 232DSP Description: RS-232 Surge Protector Type: Light industrial ITE equipment Application of Council Directive: 89/336/EEC Standards: EN 50082-1

William H. Franklin III, Director of Engineering

DECLARATION OF CONFORMITY

707 Dayton Road Ottawa, IL 61350 USA

EN 61000 (-4-2, -4-3, -4-4, -4-6)

Expand

Integrate

International Headquarters:

707 Dayton Road P.O. Box 1040 Ottawa, IL 61350 USA

815-433-5100 Fax 433-5104

+353 91 792444 Fax +353 91 792445

www.bb-elec.com orders@bb-elec.com support@bb-elec.com

Westlink Commercial Park Oranmore Co. Galway Ireland

www.bb-europe.com orders@bb-elec.com support@bb-europe.com