Baxter WM600 User Manual

Project:

FEATU R ES

■ Convenient & labor saving

■ Microcomputer controlled, to deliver a speciﬁc amount of water at a speciﬁc

temperature once the water temperature is reached.

■ Digital control panel

■ Delivery can be interrupted, the amount set changed (above the quantity

already dispensed) and delivery resumed without reprogramming.

■ Rear mounted temperature probe with 6' tether

■ Water meter remembers last setting during black-out or accidental

disconnection from power.

Item#

C.S.I. Section 11400

WM600 & WM600C

Water Meter

■ Stainless steel casing provides protection for precision components.

■ May also be used with external water chiller. Chiller is not included with unit.

Consult factory for details.

■ Use in English or Metric measures

■ Stainless steel hook on dispensing hose will hang on a standard mixing bowl

or sink.

OPTIONS & ACCESSORIES

❏ WM600: 120V/1 ph/50-60Hz/1 amp

❏ WM600C: 220-250V/1 ph/50-60Hz/1 amp

❏ Side mounted temperature probe

❏ Front mounted dispensing hose

WM600C

Area Reserved For Consultant & Contractor Approvals

Models Only

BX56019 (02-15) – Printed In USA

19220 State Route 162 East

Orting, WA 98360

www.baxtermfg.com

Factory

(360) 893-5554

Customer Care

(800) 777-2828

(800) 333-7447

Customer Care Fax

(937) 332-2852

Page 1 of 2

24”

”

C.S.I. Section 11400

WM600 & WM600C

Water Meter

Suggested Water Meter Location

” MIN – 78” AFF

(168.0 cm – 198.0 cm)

FLOOR

SPECIFICATIONS

Temperature Range: 32°F-125°F (0°C-52°C)

Weight Range: Up to 1,000 pounds (462 liters)

Accessory Switch: 7 amp, 1⁄6 HP. Automatically activates water chiller pump

when delivering. Water chiller is not included with this unit and must be ordered separately.

Flow: More than 30 lbs./min.@ 40 psi inlet pressure.

Delivery Accuracy: ±1.5%@ 30 psi inlet pressure (above 6 lb. delivery).

Temperature Accuracy: ± 2°F (1°C )

Temperature Adjustment Time: Normally less than 30 seconds for any set

temperature. Maximum temperature adjustment time 120 seconds.

Wall Mount bracket and hardware are included. Meter lifts off the bracket leaving your wall mount hardware intact.

Dimensions: 13.5"W x 7.5"D x 19"H

Weight: 52 lbs. (23.6 kg)

Freight Class 65

(61.0 cm)

WATER METER

TESTFLOW

DISCHARGE

ROUTE TO SINK

HAND SINK

19”

(48.0 cm)

12” min – 24

(31.0 cm – 61.0 cm)

36” AFF

(91.0 cm)

UTILITIES

➊ Power:

• WM600: 120V/ 5 0 - 60/1 1amp

• WM600C: 220-250V/50-60/1 amps

➋ Water – Hot: 140°F (60°C) max., 1⁄2” NPTF, 30-100 psi

➌ Water – Cold: 32°F (0°C) min., 1⁄2” NPTF, 30-100 psi

Input Supply Lines: contain cross-ﬂow preventers, pressure regulators, gauges and strainers. A disconnect joint is provided at the meter.

Output Hose: consists of NSF approved 8’ long ﬂexible hose and stainless steel tube “hook” for hanging on your mixer bowl or sink. (An approved siphon breaker is installed at the meter-end of the hose.)

Page 2 of 2